List of ISO standards
Encyclopedia
This is a list of current, publishedThis list generally excludes draft or withdrawn versions. International Organization for Standardization
(ISO) standards
and other deliverables.ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards". For a complete and up-to-date list of all the ISO standards (at least 18 849, as of October 2011), see the ISO catalogue.
The standards are copyright and most of them must be purchased. However about 300 of the standards produced by ISO and IEC
's Joint Technical Committee 1 (JTC1) have been made freely and publicly available.
International Organization for Standardization
The International Organization for Standardization , widely known as ISO, is an international standard-setting body composed of representatives from various national standards organizations. Founded on February 23, 1947, the organization promulgates worldwide proprietary, industrial and commercial...
(ISO) standards
Standardization
Standardization is the process of developing and implementing technical standards.The goals of standardization can be to help with independence of single suppliers , compatibility, interoperability, safety, repeatability, or quality....
and other deliverables.ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards". For a complete and up-to-date list of all the ISO standards (at least 18 849, as of October 2011), see the ISO catalogue.
The standards are copyright and most of them must be purchased. However about 300 of the standards produced by ISO and IEC
International Electrotechnical Commission
The International Electrotechnical Commission is a non-profit, non-governmental international standards organization that prepares and publishes International Standards for all electrical, electronic and related technologies – collectively known as "electrotechnology"...
's Joint Technical Committee 1 (JTC1) have been made freely and publicly available.
ISO 1–ISO 999
- ISO 1ISO 1ISO 1 is an international standard that specifies the standard reference temperature for geometrical product specification and verification. The temperature is fixed at 20 degrees centigrade, which is equal to 293.15 Kelvins and 68 degrees Fahrenheit....
:2002 Geometrical Product Specifications (GPS) — Standard reference temperature for geometrical product specification and verification - ISO 2ISO 2ISO 2 is an international standard for direction of twist designation for yarns, complex yarns, slivers, slubbings, rovings, cordage, and related products. The standard uses capital letters S and Z to indicate the direction of twist...
:1973 Textiles — Designation of the direction of twist in yarns and related products - ISO 3:1973 Preferred numbers — Series of preferred numbers
- ISO 4ISO 4ISO 4 is an international standard which defines a uniform system for the abbreviation of journal titles. The ISSN International Centre, which ISO has appointed as the registration authority for ISO 4, maintains the "List of Title Word Abbreviations", which are standard abbreviations for words...
:1997 Information and documentation — Rules for the abbreviation of title words and titles of publications - ISO 5ISO 5ISO 5 is an international standard for density measurements in photography and graphic technology....
Photography and graphic technology — Density measurements- ISO 5-1:2009 Geometry and functional notation
- ISO 5-2:2009 Geometric conditions for transmittance density
- ISO 5-3:2009 Spectral conditions
- ISO 5-4:2009 Geometric conditions for reflection density
- ISO 6:1993 Photography — Black-and-white pictorial still camera negative film/process systems — Determination of ISO speed
- ISO 7 Pipe threads where pressure-tight joints are made on the threads
- ISO 7-1:1994 Dimensions, tolerances and designation
- ISO 7-2:2000 Verification by means of limit gauges
- ISO 8:1977 Documentation — Presentation of periodicals
- ISO 9ISO 9The international standard ISO 9 establishes a system for the transliteration into Latin characters of Cyrillic characters constituting the alphabets of many Slavic and some non-Slavic languages....
:1995 Information and documentation — Transliteration of Cyrillic characters into Latin characters — Slavic and non-Slavic languages - ISO 11:1987 Aircraft — Ground pressure testing connections for pressure cabins
- ISO 12:1987 Aerospace — Pipelines — Identification
- ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering — Dimensions, tolerances and verification
- ISO 16:1975 Acoustics — Standard tuning frequency (Standard musical pitch)
- ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
- ISO 18 Documentation — Contents list of periodicals
- ISO 31ISO 31International Standard ISO 31 was the most widely respected style guide for the use of physical quantities and units of measurement, and formulas involving them, in scientific and educational documents worldwide...
Quantities and units [withdrawn] - ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1
- ISO 68 ISO general-purpose screw threads — Basic profile
- ISO 68-1:1998 Metric screw threads
- ISO 68-2:1998 Inch screw threads
- ISO 128ISO 128ISO 128 is an international standard , about the general principles of presentation in technical drawings, more specific the graphical representation of objects on technical drawings.- Overview :...
:1982 Technical drawingTechnical drawingTechnical drawing, also known as drafting or draughting, is the act and discipline of composing plans that visually communicate how something functions or has to be constructed.Drafting is the language of industry....
s — General principles of presentation (withdrawn 2001-04-17) - ISO 216ISO 216ISO 216 specifies international standard paper sizes used in most countries in the world today. It defines the "A" and "B" series of paper sizes, including A4, the most commonly available size...
:2007 Writing paper and certain classes of printed matter — Trimmed sizes — A and B series, and indication of machine direction - ISO 226:2003 Acoustics — Normal equal-loudness-level contours
- ISO 228 Pipe threads where pressure-tight joints are not made on the threads
- ISO 228-1:2000 Dimensions, tolerances and designation
- ISO 228-2:1987 Verification by means of limit gauges
- ISO 233ISO 233The international standard ISO 233 establishes a system for Arabic transliteration . It has been completed by ISO 233-2 in 1993.- 1984 edition :The table below shows the consonants for the Arabic language.- ISO 233-2:1993 :...
Information and documentation — Transliteration of Arabic characters into Latin characters- ISO 233-2:1993 Arabic language — Simplified transliteration
- ISO 233-3:1999 Persian language — Simplified transliteration
- ISO 259ISO 259ISO 259 is a series of international standards for the romanization of Hebrew, dating to 1984, with updated ISO 259-2 and ISO 259-3 .-External links:...
Information and documentation — Transliteration of Hebrew characters into Latin characters- ISO 259-2:1994 Simplified transliteration
- ISO 261 ISO general purpose metric screw threads — General plan
- ISO 262 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
- ISO 361ISO 361ISO 361 Basic ionizing radiation symbol is an international standard that specifies the shape, proportions, application and restrictions on the use of the symbol....
Basic ionizing radiation symbol - ISO 500 Agricultural tractors — Rear-mounted power take-off types 1, 2 and 3
- ISO 518:2006 Photography — Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units — Specification
- ISO 519:1992 Photography — Hand-held cameras — Flash-connector dimensions
- ISO 639ISO 639ISO 639 is a set of standards by the International Organization for Standardization that is concerned with representation of names for language and language groups....
Codes for the representation of names of languages- ISO 639-1ISO 639-1ISO 639-1:2002, Codes for the representation of names of languages — Part 1: Alpha-2 code, is the first part of the ISO 639 series of international standards for language codes. Part 1 covers the registration of two-letter codes. There are 136 two-letter codes registered...
Alpha-2 code - ISO 639-2ISO 639-2ISO 639-2:1998, Codes for the representation of names of languages — Part 2: Alpha-3 code, is the second part of the ISO 639 standard, which lists codes for the representation of the names of languages. The three-letter codes given for each language in this part of the standard are referred to as...
Alpha-3 code - ISO 639-3ISO 639-3ISO 639-3:2007, Codes for the representation of names of languages — Part 3: Alpha-3 code for comprehensive coverage of languages, is an international standard for language codes in the ISO 639 series. The standard describes three‐letter codes for identifying languages. It extends the ISO 639-2...
Alpha-3 code for comprehensive coverage of languages - ISO 639-4 General principles of coding of the representation of names of languages and related entities, and application guidelines
- ISO 639-5ISO 639-5ISO 639-5:2008 "Codes for the representation of names of languages—Part 5: Alpha-3 code for language families and groups" is an international standard published by the International Organization for Standardization . It was developed by ISO Technical Committee 37, Subcommittee 2, and first...
Alpha-3 code for language families and groups - ISO 639-6ISO 639-6ISO 639-6, Codes for the representation of names of languages — Part 6: Alpha-4 code for comprehensive coverage of language variants, is an international standard in the ISO 639 series, developed by...
Alpha-4 code for comprehensive coverage of language variants
- ISO 639-1
- ISO/IEC 646ISO/IEC 646ISO/IEC 646:1991, Information technology — ISO 7-bit coded character set for information interchange, is an ISO standard that since its first edition in 1972 has specified a 7-bit character code from which several national standards are derived...
Information technology — ISO 7-bit coded character set for information interchange - ISO 657ISO 657ISO 657 Hot-rolled steel sectionsIt is an ISO standard that specifies the tolerances for hot-finished circular, square and rectangular structural hollow sections and gives the dimensions and sectional properties for a range of standard sizes....
Hot-rolled steel sections - ISO 668ISO 668ISO 668 - Series 1 freight containers -- Classification, dimensions and ratings is an ISO standard which covers the classification of series 1 freight containers based on external dimensions. It also specifies the associated ratings and, where appropriate, the minimum internal and door opening...
Series 1 freight containers — Classification, dimensions and ratings - ISO 690ISO 690ISO 690 is an ISO standard for bibliographic referencing in documents of all sorts. It includes electronic documents, and specifies the elements to be included in references to published documents, and the order in which the elements of the reference should be stated...
Information and documentation — Guidelines for bibliographic references and citations to information resources - ISO 704ISO 704ISO 704 - Terminology work—Principles and methodsIt is an ISO standard, which establishes the basic principles and methods for preparing and compiling terminologies both inside and outside the framework of standardization, and describes the links between objects, concepts, and their terminological...
Terminology work — Principles and methods - ISO 732ISO 732ISO 732 is an ISO standard for medium format photographic film. The second edition of the standard specified the dimensions for 127, 120 and 620 roll film, backing paper and film spools. The third edition dropped specifications for the 127 and 620 roll films, which had become largely obsolete...
Photography — 120-size and 220-size films — Dimensions - ISO 764 Horology — Magnetic resistant watchesAntimagnetic watchAnti-magnetic watches are those that are able to run with minimal deviation when exposed to a certain magnetic field. The International Organization for Standardization issued a standard for magnetic resistant watches, which many countries have adopted.-ISO 764 magnetic resistant watches...
- ISO 838 Paper — Holes for general filing purposes — Specifications
- ISO 843ISO 843ISO 843 is a system for the transliteration of Greek characters into Latin characters.- 1997 edition :Exceptions:*double vowels are transliterated as au*double vowels are transliterated as eu*double vowels are transliterated as ou- See also :...
:1997 Information and documentation — Conversion of Greek characters into Latin characters - ISO 860ISO 860ISO 860:1996 Terminology work – Harmonization of concepts and termsIt is an ISO standard that deals with the principles which are the basis upon which concept systems can be harmonized and with the development of harmonized terminologies, in order to improve the efficiency in interlinguistic...
Terminology work — Harmonization of concepts and terms - ISO 898ISO 898ISO 898 is an international standard that defines mechanical and physical properties for metric fasteners. This standard is the origin for other standards that define properties for similar metric fasteners, such as SAE J1199 and ASTM F568M. It is divided into five parts:1...
Mechanical properties of fasteners made of carbon steel and alloy steel- ISO 898-1 Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
- ISO 898-2 Nuts with specified proof load values — Coarse thread
- ISO 898-5 Set screws and similar threaded fasteners not under tensile stresses
- ISO 898-6 Nuts with specified proof load values — Fine pitch thread
- ISO 898-7 Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
- ISO 965ISO 965ISO 965 is a International Organization for Standardization standard for metric screw thread tolerances. It specifies the basic profile for ISO general purpose metric screw threads conforming to ISO 261.The tolerance system refers to the basic profile in accordance with ISO 68-1...
ISO general purpose metric screw threads — Tolerances- ISO 965-1 Principles and basic data
- ISO 965-2 Limits of sizes for general purpose external and internal screw threads — Medium quality
- ISO 965-3 Deviations for constructional screw threads
- ISO 965-4 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
- ISO 965-5 Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
- ISO 999ISO 999ISO 999 - Information and documentation—Guidelines for the content, organization and presentation of indexes.It is an ISO standard which provides the information industry with guidelines for the content, organisation and presentation of indexes to a wide range of documents including books,...
Information and documentation — Guidelines for the content, organization, and presentation of indexes
ISO 1000–ISO 9999
- ISO 1000ISO 1000International standard ISO 1000 is the ISO standard describing the International System of Units ....
SISiSi, si, or SI may refer to :- Measurement, mathematics and science :* International System of Units , the modern international standard version of the metric system...
units and recommendations for the use of their multiples and of certain other units [withdrawn 2009-11-17] - ISO 1004 Information processing — Magnetic ink character recognitionMagnetic ink character recognitionMagnetic Ink Character Recognition, or MICR, is a character recognition technology used primarily by the banking industry to facilitate the processing of cheques and makes up the routing number and account number at the bottom of a check. The technology allows computers to read information off...
— Print specifications - ISO 1007 Photography — 135-size film135 filmThe term 135 was introduced by Kodak in 1934 as a designation for cartridge film wide, specifically for still photography. It quickly grew in popularity, surpassing 120 film by the late 1960s to become the most popular photographic film format...
and magazine — Specifications - ISO/IEC 1539 Information technology — Programming languages — FortranFortranFortran is a general-purpose, procedural, imperative programming language that is especially suited to numeric computation and scientific computing...
- ISO 1222 Photography — TripodTripod (photography)In photography, a tripod is used to stabilize and elevate a camera, or to support flashes or other photographic equipment. All photographic tripods have three legs and a mounting head to couple with a camera...
connections - ISO 1629ISO 1629ISO 1629:1995 - Rubber Test StandardIt is an ISO standard. International Organization for Standardization, in short has created over 18000 International Standards on a wide range of subjects and approximately 1100 new ISO standards are developed and published each year.ISO 1629:1995 helps in...
Rubber and latices — Nomenclature - ISO 1745 Information processing — Basic mode control procedures for data communication systems
- ISO 1750 Pesticides and other agrochemicals — Common names
- ISO/IEC 2022ISO/IEC 2022ISO/IEC 2022 Information technology—Character code structure and extension techniques, is an ISO standard specifying...
Information technology — Character code structure and extension techniques - ISO 2108 Information and documentation — International standard book numberInternational Standard Book NumberThe International Standard Book Number is a unique numeric commercial book identifier based upon the 9-digit Standard Book Numbering code created by Gordon Foster, Emeritus Professor of Statistics at Trinity College, Dublin, for the booksellers and stationers W.H...
(ISBN) - ISO 2145ISO 2145International standard ISO 2145 defines a typographic convention for the "numbering of divisions and subdivisions in written documents". It applies to any kind of document, including manuscripts, books, journal articles, and standards.-Description:...
Documentation — Numbering of divisions and subdivisions in written documents - ISO 2162 Technical product documentation — Springs
- ISO 2162-1 Simplified representation
- ISO 2162-2 Presentation of data for cylindrical helical compression springs
- ISO 2171 Cereals, pulses and by-products — Determination of ash yield by incineration
- ISO 2240:2003 Photography — Colour reversal camera films — Determination of ISO speed
- ISO 2533 Standard Atmosphere
- ISO 2709ISO 2709ISO 2709 is an ISO standard for bibliographic descriptions, titled Information and documentation—Format for information exchange.It is maintained by the Technical Committee for Information and Documentation .-History:...
Information and documentation — Format for information exchange - ISO 2768 General tolerances
- ISO 2768-1 Tolerances for linear and angular dimensions without individual tolerance indications
- ISO 2768-2 Geometrical tolerances for features without individual tolerance indications
- ISO 3082 Iron ores — Sampling and sample preparation procedures
- ISO 3098 Technical product documentation — Lettering
- ISO 3103ISO 3103ISO 3103 is a standard published by the International Organization for Standardization , specifying a standardized method for brewing tea, possibly sampled by the standardized methods described in ISO 1839. It was originally laid down in 1980 as BS 6008:1980 by the British Standards Institute...
TeaTeaTea is an aromatic beverage prepared by adding cured leaves of the Camellia sinensis plant to hot water. The term also refers to the plant itself. After water, tea is the most widely consumed beverage in the world...
— Preparation of liquor for use in sensory tests - ISO 3166ISO 3166ISO 3166 is a standard published by the International Organization for Standardization . It defines codes for the names of countries, dependent territories, special areas of geographical interest, and their principal subdivisions . The official name of the standard is Codes for the representation...
Codes for the representation of names of countries and their subdivisions- ISO 3166-1ISO 3166-1ISO 3166-1 is part of the ISO 3166 standard published by the International Organization for Standardization , and defines codes for the names of countries, dependent territories, and special areas of geographical interest. The official name of the standard is Codes for the representation of names...
Country codes - ISO 3166-2ISO 3166-2ISO 3166-2 is part of the ISO 3166 standard published by the International Organization for Standardization , and defines codes for the names of the principal subdivisions of all countries coded in ISO 3166-1...
Country subdivision code - ISO 3166-3ISO 3166-3ISO 3166-3 is part of the ISO 3166 standard published by the International Organization for Standardization , and defines codes for country names which have been deleted from ISO 3166-1 since its first publication in 1974...
Code for formerly used names of countries
- ISO 3166-1
- ISO 3297 Information and documentation — International standard serial numberInternational Standard Serial NumberAn International Standard Serial Number is a unique eight-digit number used to identify a print or electronic periodical publication. Periodicals published in both print and electronic form may have two ISSNs, a print ISSN and an electronic ISSN...
(ISSN) - ISO 3394 Dimensions of rigid rectangular packages — Transport packages
- ISO 3506 Mechanical properties of corrosion-resistant stainless steelStainless steelIn metallurgy, stainless steel, also known as inox steel or inox from French "inoxydable", is defined as a steel alloy with a minimum of 10.5 or 11% chromium content by mass....
fasteners - ISO 3536 Road vehicles — Safety glazing materialsWindshieldThe windshield or windscreen of an aircraft, car, bus, motorbike or tram is the front window. Modern windshields are generally made of laminated safety glass, a type of treated glass, which consists of two curved sheets of glass with a plastic layer laminated between them for safety, and are glued...
— Vocabulary - ISO 3537 Road vehicles — Safety glazing materialsWindshieldThe windshield or windscreen of an aircraft, car, bus, motorbike or tram is the front window. Modern windshields are generally made of laminated safety glass, a type of treated glass, which consists of two curved sheets of glass with a plastic layer laminated between them for safety, and are glued...
— Mechanical tests - ISO 3538 Road vehicles — Safety glazing materialsWindshieldThe windshield or windscreen of an aircraft, car, bus, motorbike or tram is the front window. Modern windshields are generally made of laminated safety glass, a type of treated glass, which consists of two curved sheets of glass with a plastic layer laminated between them for safety, and are glued...
— Test methods for optical properties - ISO 3601 Fluid power systems — O-ringO-ringAn O-ring, also known as a packing, or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a disc-shaped cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.The O-ring...
s- ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codes
- ISO 3601-2 Housing dimensions for general applications
- ISO 3601-3 Quality acceptance criteria
- ISO 3601-4 Anti-extrusion rings (back-up rings)
- ISO 3601-5 Suitability of elastomeric materials for industrial applications
- ISO 3602 Documentation — Romanization of Japanese (kanaKanaKana are the syllabic Japanese scripts, as opposed to the logographic Chinese characters known in Japan as kanji and the Roman alphabet known as rōmaji...
script) - ISO 3632 Spices — SaffronSaffronSaffron is a spice derived from the flower of Crocus sativus, commonly known as the saffron crocus. Crocus is a genus in the family Iridaceae. Each saffron crocus grows to and bears up to four flowers, each with three vivid crimson stigmas, which are each the distal end of a carpel...
(Crocus sativus L.) - ISO 3635:1981 Size designation of clothes — Definitions and body measurement procedure
- ISO 3676 Packaging — Unit load sizes — Dimensions
- ISO 3864ISO 3864ISO 3864 specifies international standards for safety symbols. These labels are graphical, to overcome language barriers.The corresponding American standard is ANSI Z535, which is incompatible with the ISO standard....
Graphical symbols — Safety colours and safety signs - ISO 3901 Information and documentation — International Standard Recording Code (ISRC)
- ISO 3977ISO 3977ISO 3977 is an international standard related to the design and procurement of gas turbine system applications. ISO 3977 is based primarily on the ASME 133 series on gas turbines, as well as the API 616 and API 11PGT standards. The standard environmental design point of any gas turbine system is 15...
Gas turbines — Procurement - ISO 4074 Natural latexLatexLatex is the stable dispersion of polymer microparticles in an aqueous medium. Latexes may be natural or synthetic.Latex as found in nature is a milky fluid found in 10% of all flowering plants . It is a complex emulsion consisting of proteins, alkaloids, starches, sugars, oils, tannins, resins,...
rubber condoms — Requirements and test methods - ISO 4157ISO 4157ISO 4157 is an ISO standard for construction drawings and designation systems.It is composed of 3 parts:*ISO 4157-1:1988 "Construction drawings -- Designation systems -- Part 1: Buildings and parts of buildings"...
Construction drawings — Designation systems- ISO 4157-1 Buildings and part of buildings
- ISO 4157-2 Room names and numbers
- ISO 4157-3 Room identifiers
- ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining
- ISO 4217ISO 4217ISO 4217 is a standard published by the International Standards Organization, which delineates currency designators, country codes , and references to minor units in three tables:* Table A.1 – Current currency & funds code list...
Codes for the representation of currencies and funds - ISO 4628 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance
- ISO 4628-1 General introduction and designation system
- ISO 4628-2 Assessment of degree of blistering
- ISO 4628-3 Assessment of degree of rusting
- ISO 4628-4 Assessment of degree of cracking
- ISO 4628-5 Assessment of degree of flaking
- ISO 4628-6 Assessment of degree of chalking by tape method
- ISO 4628-7 Assessment of degree of chalking by velvet method
- ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe
- ISO 4628-10 Assessment of degree of filiform corrosion
- ISO/IEC 4873:1991 Information technology — ISO 8-bit code for information interchange — Structure and rules for implementation
- ISO 4892 Plastics — Methods of exposure to laboratory light sources
- ISO 5127 Information and documentation — Vocabulary
- ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full
- ISO 5167-1 General principles and requirements
- ISO 5167-2 Orifice plates
- ISO 5167-3 Nozzles and Venturi nozzles
- ISO 5167-4 Venturi tubes
- ISO/IEC 5218 Information technology — Codes for the representation of human sexes
- ISO 5455 Technical drawings — Scales
- ISO 5457 Technical product documentation — Sizes and layout of drawing sheets
- ISO 5775ISO 5775ISO 5775 is an international standard for labeling the size of bicycle tires and rims. The system used was originally developed by the European Tyre and Rim Technical Organisation . It is designed to make tire sizing consistent and clear. It replaces overlapping informal systems that ambiguously...
Bicycle tires and rims - ISO 5800:2001 Photography — Colour negative films for still photography — Determination of ISO speed
- ISO 5964ISO 5964ISO 5964 is an ISO standard for the establishment and development of multilingual thesauri. Its full title is "Guidelines for the establishment and development of multilingual thesauri." It is intended to be used in conjunction with ISO 2788, "Guidelines for the establishment and development of...
Documentation — Guidelines for the establishment and development of multilingual thesauri - ISO 5971:1981 Size designation of clothes — Pantyhose
- ISO 6166ISO 6166ISO 6166 defines the structure of an International Securities Identifying Number . An ISIN uniquely identifies a fungible security. Securities with which ISINs can be used are Equities, Fixed income & ETF's only....
Securities and related financial instruments — International securities identification numbering system (ISIN) - ISO 6194 Rotary-shaft lip-type sealsRadial shaft sealRadial shaft seals are used to seal rotary elements, such as a shaft or rotating bore. Common examples include strut seals, hydraulic pumps seals, axle seals, power steering seals, and valve stem seals. Early radial shaft seals utilized rawhide as the sealing element, and many elastomeric seal...
incorporating elastomeric sealing elements- ISO 6194-5 Identification of visual imperfections
- ISO 6336 Calculation of load capacity of spur and helical gears
- ISO 6344ISO 6344ISO 6344 is an international standard covering the materials sizes and tests regarding sandpaper and other similar coated abrasives.It has three parts:* ISO 6344-1:1998: Coated abrasives, sizes and tests.* ISO 6344-2:1998: Macrogrit, P12 to P220...
Coated abrasivesCoated abrasivesA coated abrasive is an abrasive grain bonded to a flexible substrate using adhesives. Common substrates are paper, cloth, vulcanized fiber, and plastic films and come in grit sizes range from very coarse to ultrafine...
— Grain size analysis- ISO 6344-1 Grain size distribution test
- ISO 6344-2 Determination of grain size distribution of macrogrits P12 to P220
- ISO 6344-3 Determination of grain size distribution of microgrits P240 to P2500
- ISO/IEC 6429 Information technology — Control functions for coded character sets
- ISO 6438ISO 6438ISO 6438:1983, Documentation — African coded character set for bibliographic information interchange, is an ISO standard for an 8-bit character encoding for African languages. It has had little use...
Documentation — African coded character set for bibliographic information interchange - ISO 6579 Microbiology of food and animal feeding stuffs — Horizontal method for the detection of Salmonella spp.
- ISO 6594 Cast iron drainage pipes and fittingsPiping and plumbing fittingsFittings are used in pipe and plumbing systems to connect straight pipe or tubing sections, to adapt to different sizes or shapes, and for other purposes, such as regulating or measuring fluid flow...
— Spigot series - ISO 6709ISO 6709ISO 6709 Standard representation of geographic point location by coordinates is the international standard for representation of latitude, longitude and altitude for geographic point locations....
Standard representation of geographic point location by coordinates - ISO 6946 Building components and building elements — Thermal resistance and thermal transmittanceThermal transmittanceThermal transmittance, also known as U-value, is the rate of transfer of heat through one square metre of a structure divided by the difference in temperature across the structure. It is expressed in watts per square metre per kelvin, or W/m²K...
— Calculation method - ISO 7001ISO 7001ISO 7001 is a standard published by the International Organization for Standardization that defines a set of pictograms and symbols for public information...
Graphical symbols — Public information symbols - ISO 7002ISO 7002Titled as Agricultural food products—Layout for a standard method of sampling from a lot, the document provides a rule-based guidance on drafting a sampling method of agricultural food products for intended users...
Agricultural food products — Layout for a standard method of sampling from a lot - ISO 7098 Information and documentation — Romanization of Chinese
- ISO 7200ISO 7200ISO 7200, entitled Technical product documentation - Data fields in title blocks and document headers is an international technical standard defined by ISO which describes title block formats to be used in technical drawings....
Technical product documentation — Data fields in title blocks and document headers - ISO 7240 Fire detection and alarm systems
- ISO 7372 Trade data interchange
- ISO/IEC 7501 Identification cards — Machine readable travel documents
- ISO/IEC 7501-1:2008 Machine readable passport
- ISO/IEC 7501-2:1997 Machine readable visa
- ISO/IEC 7501-3:2005 Machine readable official travel documents
- ISO 7736ISO 7736International standard ISO 7736 defines a standard size for car audio head units. The standard was originally established by the German standards body Deutsches Institut für Normung as DIN 75490, and is therefore commonly referred to as the "DIN car radio size"...
Road vehicles — Car radio for front installation — Installation space including connections - ISO/IEC 7810 Identification cards — Physical characteristics
- ISO/IEC 7811 Identification cards — Recording technique
- ISO/IEC 7812 Identification cards — Identification of issuers
- ISO/IEC 7813 Information technology — Identification cards — Financial transaction cards
- ISO/IEC 7816 Identification cards — Integrated circuit cards
- ISO/IEC 7942 Information technology — Computer graphics and image processing — Graphical Kernel SystemGraphical Kernel SystemThe Graphical Kernel System was the first ISO standard for low-level computer graphics, introduced in 1977. GKS provides a set of drawing features for two-dimensional vector graphics suitable for charting and similar duties...
(GKS) - ISO 8000ISO 8000ISO 8000, Data quality, is an ISO standard under development. It will be published as a number of separate documents, which ISO calls "parts"....
Data qualityData qualityData are of high quality "if they are fit for their intended uses in operations, decision making and planning" . Alternatively, the data are deemed of high quality if they correctly represent the real-world construct to which they refer... - ISO 8090 Cycles — Terminology
- ISO 8180 Ductile iron pipelines — Polyethylene sleeving for site application
- ISO 8373ISO 8373ISO 8373 Manipulating industrial robots – VocabularyIt is the ISO standard that Defines terms relevant to manipulating industrial robots operated in a manufacturing environment.-References:*...
Manipulating industrial robots — Vocabulary - ISO 8501 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness
- ISO 8559:1989 Garment construction and anthropometric surveys — Body dimensions
- ISO 8583ISO 8583ISO 8583 Financial transaction card originated messages — Interchange message specifications is the International Organization for Standardization standard for systems that exchange electronic transactions made by cardholders using payment cards...
Financial transaction card originated messages — Interchange message specifications- ISO 8583-1 Messages, data elements and code values
- ISO 8583-2 Application and registration procedures for Institution Identification Codes (IIC)
- ISO 8583-3 Maintenance procedures for messages, data elements and code values
- ISO 8601ISO 8601ISO 8601 Data elements and interchange formats – Information interchange – Representation of dates and times is an international standard covering the exchange of date and time-related data. It was issued by the International Organization for Standardization and was first published in 1988...
Data elements and interchange formats — Information interchange — Representation of dates and times - ISO/IEC 8613 Information technology — Open Document ArchitectureOpen Document ArchitectureThe Open Document Architecture and interchange format is a free and open international standard document file format maintained by the ITU-T to replace all proprietary document file formats...
(ODA) and interchange format - ISO/IEC 8632 Information technology — Computer graphics — MetafileComputer Graphics MetafileComputer Graphics Metafile is a free and open international standard file format for 2D vector graphics, raster graphics, and text, and is defined by ISO/IEC 8632.-Overview:...
for the storage and transfer of picture description information - ISO 8651 Information technology — Computer graphics — Graphical Kernel SystemGraphical Kernel SystemThe Graphical Kernel System was the first ISO standard for low-level computer graphics, introduced in 1977. GKS provides a set of drawing features for two-dimensional vector graphics suitable for charting and similar duties...
(GKS) language bindings - ISO/IEC 8652 Information technology — Programming languages — AdaAda (programming language)Ada is a structured, statically typed, imperative, wide-spectrum, and object-oriented high-level computer programming language, extended from Pascal and other languages...
- ISO 8653:1986 JewelleryJewelleryJewellery or jewelry is a form of personal adornment, such as brooches, rings, necklaces, earrings, and bracelets.With some exceptions, such as medical alert bracelets or military dog tags, jewellery normally differs from other items of personal adornment in that it has no other purpose than to...
— Ring-sizesRing sizeThere are several systems for denoting the sizes of jewellery rings in use around the world:* The ISO standard for ring sizes is ISO 8653:1986, which defines standard ring sizes in terms of the inner circumference of the ring measured in millimetres....
— Definition, measurement and designation - ISO 8691ISO 8691ISO 8691:1994 Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing is an ISO standard covering petroleum products, developed by ISO's Technical Committee 28: Petroleum products and lubricants...
Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing - ISO 8805 Information processing systems — Computer graphics — Graphical Kernel SystemGraphical Kernel SystemThe Graphical Kernel System was the first ISO standard for low-level computer graphics, introduced in 1977. GKS provides a set of drawing features for two-dimensional vector graphics suitable for charting and similar duties...
for Three Dimensions (GKS-3D) functional description - ISO/IEEC 8806 Information technology — Computer graphics — Graphical Kernel SystemGraphical Kernel SystemThe Graphical Kernel System was the first ISO standard for low-level computer graphics, introduced in 1977. GKS provides a set of drawing features for two-dimensional vector graphics suitable for charting and similar duties...
for Three Dimensions (GKS-3D) language bindings- ISO/IEEC 8806-4 C
- ISO 8807 Information processing systems — Open Systems Interconnection — LOTOSLanguage Of Temporal Ordering SpecificationLanguage Of Temporal Ordering Specification is a formal specification language based on temporal ordering used for protocol specification in ISO OSI standards....
— A formal description technique based on the temporal ordering of observational behaviour - ISO/IEC 8824 Information technology — Abstract Syntax Notation OneAbstract Syntax Notation OneData generated at various sources of observation need to be transmitted to one or more locations that process it to generate useful results. For example, voluminous signal data collected by a radio telescope from outer space. The system recording the data and the system processing it later may be...
(ASN.1) - ISO/IEC 8825 Information technology — ASN.1 encoding rules
- ISO/IEC 8859ISO/IEC 8859ISO/IEC 8859 is a joint ISO and IEC series of standards for 8-bit character encodings. The series of standards consists of numbered parts, such as ISO/IEC 8859-1, ISO/IEC 8859-2, etc. There are 15 parts, excluding the abandoned ISO/IEC 8859-12...
Information technology — 8-bit single-byte coded graphic character sets- ISO/IEC 8859-1ISO/IEC 8859-1ISO/IEC 8859-1:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 1: Latin alphabet No. 1, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1987. It is informally referred to as Latin-1. It is generally...
Latin alphabet No. 1 - ISO/IEC 8859-2ISO/IEC 8859-2ISO/IEC 8859-2:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 2: Latin alphabet No. 2, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1987. It is informally referred to as "Latin-2". It is generally...
Latin alphabet No. 2 - ISO/IEC 8859-3ISO/IEC 8859-3ISO/IEC 8859-3:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 3: Latin alphabet No. 3, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1988. It is informally referred to as Latin-3 or South European...
Latin alphabet No. 3 - ISO/IEC 8859-4ISO/IEC 8859-4ISO/IEC 8859-4:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 4: Latin alphabet No. 4, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1988. It is informally referred to as Latin-4 or North European. It...
Latin alphabet No. 4 - ISO/IEC 8859-5ISO/IEC 8859-5ISO/IEC 8859-5:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 5: Latin/Cyrillic alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1988. It is informally referred to as Latin/Cyrillic...
Latin/Cyrillic alphabet - ISO/IEC 8859-6ISO/IEC 8859-6ISO/IEC 8859-6:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 6: Latin/Arabic alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1987. It is informally referred to as Latin/Arabic. It was...
Latin/Arabic alphabet - ISO/IEC 8859-7ISO/IEC 8859-7ISO/IEC 8859-7:2003, Information technology — 8-bit single-byte coded graphic character sets — Part 7: Latin/Greek alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1987. It is informally referred to as Latin/Greek. It was designed...
Latin/Greek alphabet - ISO/IEC 8859-8ISO/IEC 8859-8ISO/IEC 8859-8:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 8: Latin/Hebrew alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1987. It is informally referred to as Latin/Hebrew...
Latin/Hebrew alphabet - ISO/IEC 8859-9ISO/IEC 8859-9ISO/IEC 8859-9:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 9: Latin alphabet No. 5, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1989. It is informally referred to as Latin-5 or Turkish...
Latin alphabet No. 5 - ISO/IEC 8859-10ISO/IEC 8859-10ISO/IEC 8859-10:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 10: Latin alphabet No. 6, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1992. It is informally referred to as Latin-6. It was designed to...
Latin alphabet No. 6 - ISO/IEC 8859-11ISO/IEC 8859-11ISO/IEC 8859-11:2001, Information technology — 8-bit single-byte coded graphic character sets — Part 11: Latin/Thai alphabet, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 2001. It is informally referred to as Latin/Thai. It is nearly...
Latin/Thai alphabet - ISO/IEC 8859-13ISO/IEC 8859-13ISO/IEC 8859-13:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 13: Latin alphabet No. 7, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1998. It is informally referred to as Latin-7 or Baltic Rim...
Latin alphabet No. 7 - ISO/IEC 8859-14ISO/IEC 8859-14ISO/IEC 8859-14:1998, Information technology — 8-bit single-byte coded graphic character sets — Part 14: Latin alphabet No. 8 , is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1998. It is informally referred to as Latin-8 or Celtic...
Latin alphabet No. 8 (Celtic) - ISO/IEC 8859-15ISO/IEC 8859-15ISO/IEC 8859-15:1999, Information technology — 8-bit single-byte coded graphic character sets — Part 15: Latin alphabet No. 9, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 1999. It is informally referred to as Latin-9...
Latin alphabet No. 9 - ISO/IEC 8859-16ISO/IEC 8859-16ISO/IEC 8859-16:2001, Information technology — 8-bit single-byte coded graphic character sets — Part 16: Latin alphabet No. 10, is part of the ISO/IEC 8859 series of ASCII-based standard character encodings, first edition published in 2001. It is informally referred to as Latin-10 or South-Eastern...
Latin alphabet No. 10
- ISO/IEC 8859-1
- ISO 8879 Information processing — Text and office systems — Standard Generalized Markup LanguageStandard Generalized Markup LanguageThe Standard Generalized Markup Language is an ISO-standard technology for defining generalized markup languages for documents...
(SGML) - ISO 9000ISO 9000The ISO 9000 family of standards relates to quality management systems and is designed to help organizations ensure they meet the needs of customers and other stakeholders . The standards are published by ISO, the International Organization for Standardization, and available through National...
Quality management systems — Fundamentals and vocabulary - ISO 9001 Quality management systems — Requirements
- ISO 9069 Information processing — SGML support facilities — SGML Document Interchange Format (SDIF)
- ISO/IEC 9075 Information technology — Database languages — SQLSQLSQL is a programming language designed for managing data in relational database management systems ....
- ISO/IEC 9126 Software engineering — Product quality
- ISO 9141 Road vehicles — Diagnostic systems
- ISO 9141-2 [California Air Resources Board|CARB] requirements for interchange of digital information
- ISO 9141-3 Verification of the communication between vehicle and OBDOn-board diagnosticsOn-Board Diagnostics, or OBD, in an automotive context, is a generic term referring to a vehicle's self-diagnostic and reporting capability. OBD systems give the vehicle owner or a repair technician access to state of health information for various vehicle sub-systems...
II scan tool
- ISO 9241ISO 9241ISO 9241 is a multi-part standard from the International Organization for Standardization covering ergonomics of human-computer interaction. It is managed by the ISO...
Ergonomics of human-system interaction - ISO 9362ISO 9362ISO 9362 is a standard format of Business Identifier Codes approved by the International Organization for Standardization . It is a unique identification code for both financial and non-financial institutions...
Banking — Banking telecommunication messages — Business identifier code (BIC) - ISO 9407 Shoe sizes — Mondopoint system of sizing and marking
- ISO/IEC 9541 Information technology — Font information interchange
- ISO/IEC 9541-1:1991 Architecture
- ISO/IEC 9541-2:1991 Interchange Format
- ISO/IEC 9541-3:1994 Glyph shape representation
- ISO/IEC 9541-4:2009 Harmonization to Open Font Format
- ISO 9564ISO 9564ISO 9564 is an international standard for personal identification number management and security in retail banking.The PIN is used to verify the identity of a customer within an electronic funds transfer system, and to authorise the transfer of funds, so it is important to protect it against...
Financial services — Personal Identification Number (PIN) management and security - ISO/IEC 9579 Information technology — Remote database access for SQLSQLSQL is a programming language designed for managing data in relational database management systems ....
with security enhancement - ISO/IEC 9592 Information technology — Computer graphics and image processing — Programmer's Hierarchical Interactive Graphics System (PHIGSPHIGSPHIGS is an API standard for rendering 3D computer graphics, at one time considered to be the 3D graphics standard for the 1990s. Instead a combination of features and power led to the rise of OpenGL, which became the most popular professional 3D API of the 1990s...
) - ISO/IEC 9593 Information technology — Computer graphics — Programmer's Hierarchical Interactive Graphics System (PHIGS) language bindings
- ISO/IEC 9594 Information technology — Open Systems InterconnectionOpen Systems InterconnectionOpen Systems Interconnection is an effort to standardize networking that was started in 1977 by the International Organization for Standardization , along with the ITU-T.-History:...
— The Directory - ISO 9660ISO 9660ISO 9660, also referred to as CDFS by some hardware and software providers, is a file system standard published by the International Organization for Standardization for optical disc media....
Information processing — Volume and file structure of CD-ROMCD-ROMA CD-ROM is a pre-pressed compact disc that contains data accessible to, but not writable by, a computer for data storage and music playback. The 1985 “Yellow Book” standard developed by Sony and Philips adapted the format to hold any form of binary data....
for information interchange - ISO/IEC 9796 Information technology — Security techniques — Digital signature schemes giving message recovery
- ISO/IEC 9797 Information technology — Security techniques — Message Authentication CodeMessage authentication codeIn cryptography, a message authentication code is a short piece of information used to authenticate a message.A MAC algorithm, sometimes called a keyed hash function, accepts as input a secret key and an arbitrary-length message to be authenticated, and outputs a MAC...
s (MACs)- ISO/IEC 9797-1ISO/IEC 9797-1ISO/IEC 9797-1 Information technology — Security techniques — Message Authentication Codes — Part 1: Mechanisms using a block cipher is an international standard that defines methods for calculating a message authentication code over data.Rather than defining one specific...
Mechanisms using a block cipher - ISO/IEC 9797-2 Mechanisms using a dedicated hash-function
- ISO/IEC 9797-1
- ISO/IEC 9798 Information technology — Security techniques — Entity authentication
- ISO/IEC 9834 Information technology — Open Systems InterconnectionOpen Systems InterconnectionOpen Systems Interconnection is an effort to standardize networking that was started in 1977 by the International Organization for Standardization , along with the ITU-T.-History:...
— Procedures for the operation of OSI Registration Authorities - ISO 9869 Thermal insulation — Building elements — In-situ measurements of thermal resistance and thermal transmittanceThermal transmittanceThermal transmittance, also known as U-value, is the rate of transfer of heat through one square metre of a structure divided by the difference in temperature across the structure. It is expressed in watts per square metre per kelvin, or W/m²K...
- ISO/IEC 9899 Programming languages — CC (programming language)C is a general-purpose computer programming language developed between 1969 and 1973 by Dennis Ritchie at the Bell Telephone Laboratories for use with the Unix operating system....
- ISO/IEC/IEEE 9945 Information technology — Portable Operating System Interface (POSIXPOSIXPOSIX , an acronym for "Portable Operating System Interface", is a family of standards specified by the IEEE for maintaining compatibility between operating systems...
®) Base Specifications, Issue 7 - ISO 9984ISO 9984The international standard ISO 9984 establishes a system for the transliteration into Latin characters of modern Georgian characters.- See also :*Georgian national system of romanization*BGN/PCGN romanization*List of ISO transliterations...
Information and documentation — Transliteration of Georgian characters into Latin characters - ISO 9985 Information and documentation — Transliteration of Armenian characters into Latin characters
- ISO 9992 Financial transaction cards — Messages between the integrated circuit card and the card accepting device
- ISO/IEC 9995ISO/IEC 9995ISO/IEC 9995 Information technology — Keyboard layouts for text and office systems is an ISO standard defining layouts of computer keyboards. It defines a keyboard as having three groups of key assignments:...
Information technology — Keyboard layouts for text and office systems - ISO 9999 Assistive products for persons with disability — Classification and terminology
ISO 10000–ISO 19999
- ISO 10006ISO 10006ISO 10006:2003, Quality management systems - Guidelines for quality management in projects, is an international standard developed by the International Organization for Standardization....
Quality management systems — Guidelines for quality management in projects - ISO 10007ISO 10007‘’’ISO 10007:2003’’’ is the ISO standard that gives guidance on the use of configuration management within an organization. It is applicable to the support of products from concept to disposal....
Quality management systems — Guidelines for configuration managementConfiguration managementConfiguration management is a field of management that focuses on establishing and maintaining consistency of a system or product's performance and its functional and physical attributes with its requirements, design, and operational information throughout its life.For information assurance, CM... - ISO 10012ISO 10012ISO 10012:2003 is the ISO standard that specifies generic requirements and provides guidance for the management of measurement processes and metrological confirmation of measuring equipment used to support and demonstrate compliance with metrological requirements...
Measurement management systems — Requirements for measurement processes and measuring equipment - ISO/IEC 10021ISO/IEC 10021‘’’ ISO/IEC 10021’’’ is the ISO standard defines the overall system and service of an Information technology - Message Handling Systems and serves as a general overview of Message Handling Systems....
Information technology — Message Handling Systems (MHS) - ISO/IEC 10026 Information technology — Open Systems InterconnectionOpen Systems InterconnectionOpen Systems Interconnection is an effort to standardize networking that was started in 1977 by the International Organization for Standardization , along with the ITU-T.-History:...
- ISO 10077 Thermal performance of windows, doors and shutters — Calculation of thermal transmittanceThermal transmittanceThermal transmittance, also known as U-value, is the rate of transfer of heat through one square metre of a structure divided by the difference in temperature across the structure. It is expressed in watts per square metre per kelvin, or W/m²K...
- ISO/IEC 10089 Information technology — 130 mm rewritable optical disk cartridge for information interchange
- ISO/IEC 10116 Information technology — Security techniques — Modes of operation for an n-bit block cipher
- ISO/IEC 10118 Information technology — Security techniques — Hash-functions
- ISO 10160ISO 10160ISO 10160 is the ISO standard that defines the terminology that is used for interlibrary loan transactions between various document exchange systems such as VDX. It is closely related to ISO 10161, the Interlibrary Loan Application Protocol....
Information and documentation — Open Systems Interconnection — Interlibrary LoanInterlibrary loanInterlibrary loan is a service whereby a user of one library can borrow books or receive photocopies of documents that are owned by another library...
Application Service Definition - ISO 10161ISO 10161ISO 10161 is the ISO standard that defines the interlibrary loan application protocol for communication between various document exchange systems. It allows ILL systems at different libraries and residing on different hardware platforms and using different software packages such as VDX to...
Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification - ISO/IEC 10164 Information technology — Open Systems Interconnection — Systems Management
- ISO/IEC 10179:1996 Information technology — Processing languages — Document Style Semantics and Specification LanguageDocument Style Semantics and Specification LanguageDocument Style Semantics and Specification Language is a computer language for specifying stylesheets for SGML documents, based on a subset of the Scheme programming language. It is specified by the standard ISO/IEC 10179:1996...
(DSSSL) - ISO/IEC 10206 Information technology — Progamming languages — Extended PascalPascal (programming language)Pascal is an influential imperative and procedural programming language, designed in 1968/9 and published in 1970 by Niklaus Wirth as a small and efficient language intended to encourage good programming practices using structured programming and data structuring.A derivative known as Object Pascal...
- ISO 10211 Thermal bridgeThermal bridgeA thermal bridge, also called a cold bridge, is a fundamental of heat transfer where a penetration of the insulation layer by a highly conductive or noninsulating material takes place in the separation between the interior and exterior environments of a building assembly .Thermal...
s in building construction — Heat flows and surface temperatures — Detailed calculations - ISO/IEC 10279 Information technology — Programming languages — Full BASICBASICBASIC is a family of general-purpose, high-level programming languages whose design philosophy emphasizes ease of use - the name is an acronym from Beginner's All-purpose Symbolic Instruction Code....
- ISO 10303ISO 10303ISO 10303 is an ISO standard for the computer-interpretable representation and exchange of product manufacturing information. Its official title is: Automation systems and integration — Product data representation and exchange...
Industrial automation systems and integration — Product data representation and exchange - ISO 10383ISO 10383ISO 10383 is an ISO standard which "specifies a universal method of identifying exchanges, trading platforms and regulated or non-regulated markets as sources of prices and related information in order to facilitate automated processing." The codes defined by the standard are known as Market...
Securities and related financial instruments — Codes for exchanges and market identification (MIC) - ISO 10487ISO 10487-ISO 10487:ISO 10487 defines a standard for connectors for the head unit to the car's electrical system, consisting of a system of four different connectors typically used in head units for car audio.-Power :...
Passenger cars — Connections for car radios - ISO 10628 Flow diagrams for process plantsProcess Flow diagramA process flow diagram is a diagram commonly used in engineering to indicate the general flow of plant processes and equipment.The PFD displays the relationship between major equipment of a plant facility and does not show minor details such as piping details and designations...
- ISO/IEC 10646 Information technology — Universal Coded Character SetUniversal Character SetThe Universal Character Set , defined by the International Standard ISO/IEC 10646, Information technology — Universal multiple-octet coded character set , is a standard set of characters upon which many character encodings are based...
(UCS) - ISO 10664 Hexalobular internal driving feature for bolts and screws — TorxTorxTorx developed by Camcar Textron, is the trademark for a type of screw head characterized by a 6-point star-shaped pattern. People who are unfamiliar with the trademark generally use the term star, as in star screwdriver or star bits...
screw head - ISO 10957 Information and documentation — International standard music numberInternational Standard Music NumberThe International Standard Music Number or ISMN is a thirteen-character alphanumeric identifier for printed music developed by ISO...
(ISMN) - ISO 10962ISO 10962ISO 10962 is the CFI code maintained by the International Organization for Standardization . It is an alphabetical code consisting of 6 letters. The first letter is the category, the second is the group, and the remaining letters show special attributes of the group...
Securities and related financial instruments — Classification of Financial Instruments (CFI code) - ISO 10993ISO 10993The ISO 10993 set entails a series of standards for evaluating the biocompatibility of a medical device prior to a clinical study . These documents were preceded by the Tripartite agreement and is a part of the harmonisation of the safe use evaluation of medical devices .-List of the standards in...
Biological evaluation of medical devices- ISO 10993-1 Evaluation and testing within a risk management process
- ISO 10993-2 Animal welfare requirements
- ISO 10993-3 Tests for genotoxicity, carcinogenicity and reproductive toxicity
- ISO 10993-4 Selection of tests for interactions with blood
- ISO 10993-5 Tests for in vitro cytotoxicity
- ISO 10993-6 Tests for local effects after implantation
- ISO 10993-7 Ethylene oxide sterilization residuals
- ISO 10993-9 Framework for identification and quantification of potential degradation products
- ISO 10993-10 Tests for irritation and skin sensitization
- ISO 10993-11 Tests for systemic toxicity
- ISO 10993-12 Sample preparation and reference materials
- ISO 10993-13 Identification and quantification of degradation products from polymeric medical devices
- ISO 10993-14 Identification and quantification of degradation products from ceramics
- ISO 10993-15 Identification and quantification of degradation products from metals and alloys
- ISO 10993-16 Toxicokinetic study design for degradation products and leachables
- ISO 10993-17 Establishment of allowable limits for leachable substances
- ISO 10993-18 Chemical characterization of materials
- ISO 10993-19 Physico-chemical, morphological and topographical characterization of materials
- ISO 10993-20 Principles and methods for immunotoxicology testing of medical devices
- ISO 11064 Ergonomic design of control centres
- ISO 11064-1:2000 Principles for the design of control centres
- ISO 11064-2:2000 Principles for the arrangement of control suites
- ISO 11064-3:1999 Control room layout ISO 11064-3:1999/Cor 1:2002
- ISO 11064-4:2004 Layout and dimensions of workstations
- ISO 11064-5:2008 Displays and controls
- ISO 11064-6:2005 Environmental requirements for control centres
- ISO 11064-7:2006 Principles for the evaluation of control centres
- ISO 11137 Sterilization of health care products — Radiation
- ISO 11170ISO 11170ISO 11170:2003 is an international standard which defines a sequence of tests for verifying filter elements. It can be used to check their hydraulic, mechanical and separation characteristics. ISO 11170 is not intended to qualify a filter for a particular duty or replicate conditions of service...
:2003 Hydraulic fluid power — Filter elements — Sequence of tests for verifying performance characteristics - ISO/IEC 11172 Information technology — Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s
- ISO/IEC 11179ISO/IEC 11179ISO/IEC 11179 is an international standard for representing metadata for an organization in a metadata registry.- Intended purpose :...
Information technology — Metadata registries (MDR)- ISO/IEC 11179-1:2004 Framework
- ISO/IEC 11179-2:2005 Classification
- ISO/IEC 11179-3:2003 Registry metamodel and basic attributes
- ISO/IEC 11179-4:2004 Formulation of data definitions
- ISO/IEC 11179-5:2005 Naming and identification principles
- ISO/IEC 11179-6:2005 Registration
- ISO/IEC 11404 Information technology — General-Purpose Datatypes (GPD)
- ISO 11446ISO 11446ISO 11446:2004 specifies a 13-pole electrical connector between towing and towed vehicles with 12 volt electrical system.-References:* *...
:2004 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 13-pole connectors for vehicles with 12 V nominal supply voltage - ISO 11469:2000 Plastics — Generic identification and marking of plastics products
- ISO/IEC 11578:1996 Information technologyInformation technologyInformation technology is the acquisition, processing, storage and dissemination of vocal, pictorial, textual and numerical information by a microelectronics-based combination of computing and telecommunications...
— Open Systems InterconnectionOpen Systems InterconnectionOpen Systems Interconnection is an effort to standardize networking that was started in 1977 by the International Organization for Standardization , along with the ITU-T.-History:...
— Remote procedure callRemote procedure callIn computer science, a remote procedure call is an inter-process communication that allows a computer program to cause a subroutine or procedure to execute in another address space without the programmer explicitly coding the details for this remote interaction...
(RPC) - ISO 11783ISO 11783ISO 11783 is a communication protocol based on the SAE J1939 protocol for the agriculture industry.It is managed by the ISOBUS group in VDMA....
Tractors and machinery for agriculture and forestry — Serial control and communications data network - ISO/IEC 11801ISO/IEC 11801International standard ISO/IEC 11801 specifies general-purpose telecommunication cabling systems that are suitable for a wide range of applications . It covers both balanced copper cabling and optical fibre cabling...
Information technology — Generic cabling for customer premises - ISO 11898ISO 11898ISO 11898 specifies a serial communication technology called Controller Area Network that supports distributed real-time control and multiplexing for use within road vehicles.- Structure of the ISO 11898 standard :...
Road vehicles — Controller area network (CAN) - ISO 12006ISO 12006ISO 12006 "Building construction" is an international standard for organising information about construction works. It is composed of 3 parts:*ISO 12006-1...
Building construction — Organization of information about construction works - ISO/IEC 12207 Systems and software engineering — Software life cycle processes
- ISO 12639 Graphic technology — Prepress digital data exchange — Tag image file format for image technology (TIFF/IT)
- ISO 12641 Graphic technology — Prepress digital data exchange — Colour targets for input scanner calibration
- ISO/TS 12805:2011 Nanotechnologies — Materials specifications — Guidance on specifying nano-objects
- ISO/TR 13121:2011 Nanotechnologies — Nanomaterial risk evaluation
- ISO 13239 Information technology — Telecommunications and information exchange between systems — High-level data link control (HDLC) procedures
- ISO/IEC 13249 Information technology — Database languages — SQLSQLSQL is a programming language designed for managing data in relational database management systems ....
multimedia and application - ISO/IEC 13250 Information technology — Topic Maps
- ISO/IEC 13346 Information technology — Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange
- ISO 13370 Thermal performance of buildings — Heat transfer via the ground — Calculation methods
- ISO 13406-2ISO 13406-2ISO 13406-2 is an ISO standard, with the full title "Ergonomic requirements for work with visual displays based on flat panels -- Part 2: Ergonomic requirements for flat panel displays". It is best known to end consumers for defining a series of flat-panel display "classes" with different numbers...
:2001 Ergonomic requirements for work with visual displays based on flat panels — Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-14] - ISO 13450 Photography — 110-size cartridge, film and backing paper110 film110 is a cartridge-based film format used in still photography. It was introduced by Kodak in 1972. 110 is a miniaturised version of Kodak's earlier 126 film format. Each frame is , with one registration hole....
— Dimensions - ISO 13485ISO 13485ISO 13485 is an ISO standard, published in 2003, that represents the requirements for a comprehensive management system for the design and manufacture of medical devices...
:2003 Medical devices — Quality management systems — Requirements for regulatory purposes - ISO/IEC 13490 Information technology — Volume and file structure of read-only and write-once compact disk media for information interchange
- ISO 13567ISO 13567ISO 13567 is an international Computer-aided design layer standard.-Standard parts:The standard is divided in three parts:* ISO 13567-1:1998**Technical product documentation — Organization and naming of layers for CAD — Part 1: Overview and principles...
Technical product documentation — Organization and naming of layers for CADComputer-aided designComputer-aided design , also known as computer-aided design and drafting , is the use of computer technology for the process of design and design-documentation. Computer Aided Drafting describes the process of drafting with a computer... - ISO/IEC 13568:2002 Information Technology — Z formal specification notationZ notationThe Z notation , named after Zermelo–Fraenkel set theory, is a formal specification language used for describing and modelling computing systems. It is targeted at the clear specification of computer programs and computer-based systems in general.-History:...
— Syntax, type system and semantics - ISO 13616 Financial services — International bank account number (IBAN)
- ISO 13628 Petroleum and natural gas industries — Design and operation of subsea production systems
- ISO 13628-1 General requirements and recommendations
- ISO 13628-2 Unbonded flexible pipe systems for subsea and marine applications
- ISO 13628-3 Through flowline (TFL) systems
- ISO 13628-4 Subsea wellhead and tree equipment
- ISO 13628-5 Subsea umbilicals
- ISO 13628-6 Subsea production control systems
- ISO 13628-7 Completion/workover riser systems
- ISO 13628-8 Remotely Operated Vehicle (ROV) interfaces on subsea production systems
- ISO 13628-9 Remotely Operated Tool (ROT) intervention systems
- ISO 13628-10 Specification for bonded flexible pipe
- ISO 13628-11 Flexible pipe systems for subsea and marine applications
- ISO 13849 Safety of machinery — Safety related parts of control systems
- ISO/IEC 13818 Information technology — Generic coding of moving pictures and associated audio information
- ISO 13837 Road vehicles — Safety glazing materialsWindshieldThe windshield or windscreen of an aircraft, car, bus, motorbike or tram is the front window. Modern windshields are generally made of laminated safety glass, a type of treated glass, which consists of two curved sheets of glass with a plastic layer laminated between them for safety, and are glued...
— Method for the determination of solar transmittance - ISO 14001 Environmental management systems — Requirements with guidance for use
- ISO 14064ISO 14064The ISO 14064 standards are part of the ISO 14000 series of International Standards for environmental management. The ISO 14064 standards provide governments, businesses, regions and other organisations with an integrated set of tools for programs aimed at measuring, quantifying and reducing...
Greenhouse gases - ISO 14155ISO 14155This International Standard addresses good clinical practices for the design, conduct, recording and reporting of clinical investigations carried out in human subjects to assess the safety and performance of medical devices for regulatory purposes....
:2011 Clinical investigation of medical devices for human subjects — Good clinical practice - ISO 14223 Radiofrequency identification of animals — Advanced transponders
- ISO 14230 Road vehicles — Diagnostic systems — Keyword Protocol 2000Keyword Protocol 2000Keyword Protocol 2000, abbreviated KWP2000, is a communications protocol used for on-board vehicle diagnostics systems . This protocol covers the application layer in the OSI model of computer networking...
- ISO 14230-1 Physical layer
- ISO 14230-2 Data link layer
- ISO 14230-3 Application layer
- ISO 14230-4 Requirements for emission-related systems
- ISO/IEC 14443 Identification cards — Contactless integrated circuit cards — Proximity cards
- ISO/IEC 14496 Information technology — Coding of audio-visual objects
- ISO 14644ISO 14644ISO 14644 Standards were first formed from the US Federal Standard 209E Airborne Particulate Cleanliness Classes in Cleanrooms and Clean Zones. The need for a single standard for cleanroom classification and testing was long felt...
Cleanrooms and associated controlled environments- ISO 14644-1ISO 14644-1ISO 14644-1, Cleanrooms and associated controlled environments—Part 1: Classification of air cleanliness, was the first ISO 14644 International Standard prepared by ISO Technical Committee 209...
:1999 Classification of air cleanliness - ISO 14644-2ISO 14644-2ISO 14644-2, Cleanrooms and associated controlled environments-Part 2: Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 became an International Standard following the cancellation of FED-STD-209E...
:2000 Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 - ISO 14644-3ISO 14644-3ISO 14644, Cleanrooms and associated controlled environments - Part 3: Test Methods, is a highly referenced ISO document, helped developed by the Secretariat of ISO Technical Committee 209, IEST....
:2005 Test methods - ISO 14644-4ISO 14644-4ISO 14644, Cleanrooms and associated controlled environments - Part 4: Design, construction and start-up, was submitted as an American National Standard in 2001....
:2001 Design, construction and start-up - ISO 14644-5ISO 14644-5ISO 14644-5, Cleanrooms and associate controlled environments - Part 5: Operations, was published as an International Standard in 2004 and is available from IEST...
:2004 Operations - ISO 14644-6ISO 14644-6ISO 14644-6: Vocabulary as an important document for any contamination control professional. This document describes all the terms and definitions in all the ISO 14644 Standards and ISO 14698 Standards...
:2007 Vocabulary - ISO 14644-7ISO 14644-7ISO 14644-7, Cleanrooms and associate controlled environments - Part 7: Separative devices was published as an International Standard in 2004...
:2004 Separative devices (clean air hoods, gloveboxes, isolators and mini-environments) - ISO 14644-8ISO 14644-8ISO 14644-8, Cleanrooms and associate controlled environments - Part 8: Classification of airborne molecular contamination became a Standard in 2006...
:2006 Classification of airborne molecular contamination
- ISO 14644-1
- ISO/IEC 14651 Information technology — International string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering
- ISO 14698ISO 14698The ISO 14698 Standards features two International Standards on Biocontamination control. IEST, the Secretariat and Administrator of ISO Technical Committee 209, helped develop this series of ISO 14698 Standards....
Cleanrooms and associated controlled environments — Biocontamination control- ISO 14698-1 General principles and methods
- ISO 14698-2 Evaluation and interpretation of biocontamination data
- ISO/IEC 14750 Information technology — Open Distributed Processing — Interface Definition Language
- ISO/IEC 14755 Information technology — Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
- ISO 14855-1 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide
- ISO 14855-1:2005 General method
- ISO 14855-2:2007 Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
- ISO/IEC 14882 Programming Languages — C++C++C++ is a statically typed, free-form, multi-paradigm, compiled, general-purpose programming language. It is regarded as an intermediate-level language, as it comprises a combination of both high-level and low-level language features. It was developed by Bjarne Stroustrup starting in 1979 at Bell...
- ISO 14915 Software ergonomics for multimedia user interfaces
- ISO 14915-1:2002 Design principles and framework
- ISO 14915-2:2003 Multimedia navigation and control
- ISO 14915-3:2002 Media selection and combination
- ISO 14971ISO 14971ISO 14971 is an ISO standard, of which the latest revision was published in 2007, that represents the requirements for a risk management system for medical devices....
:2007 Medical devices — Application of risk management to medical devices - ISO/IEC 14977 Information technology — Syntactic metalanguage — Extended BNF
- ISO/TS 15000 Electronic business eXtensible Markup Language ebXML
- ISO/TS 15000-1:2004 Collaboration-protocol profile and agreement specification (ebCPP)
- ISO/TS 15000-2:2004 Message service specification (ebMS)
- ISO/TS 15000-3:2004 Registry information model specification (ebRIM)
- ISO/TS 15000-4:2004 Registry services specification (ebRS)
- ISO/TS 15000-5:2005 ebXML. Core Components Technical Specification, Version 2.01(ebCCTS)
- ISO 15022ISO 15022ISO 15022 is an ISO standard for messaging used in securities trading. Participants in the financial industry need a common representation of the financial transactions they perform and this standard defines general message schema, which in turn are used by organizations to define messages in a...
Securities — Scheme for messages (Data Field Dictionary) - ISO 15082 Road vehicles — Tests for rigid plastic safety glazing materialsWindshieldThe windshield or windscreen of an aircraft, car, bus, motorbike or tram is the front window. Modern windshields are generally made of laminated safety glass, a type of treated glass, which consists of two curved sheets of glass with a plastic layer laminated between them for safety, and are glued...
- ISO 15099 Thermal performance of windows, doors and shading devices — Detailed calculations
- ISO 15112 Natural gas — Energy determination
- ISO 15189ISO 15189ISO 15189 Medical laboratories — Particular requirements for quality and competence specifies the quality management system requirements particular to medical laboratories. The standard was developed by the International Organisation for Standardisations's Technical Committee 212...
Medical laboratories — Particular requirements for quality and competence - ISO 15223 Medical devices – Symbols to be used with medical device labels, labelling, and information to be supplied
- ISO/IEC 15288 Systems and software engineering — System life cycle processes
- ISO/IEC 15289 Systems and software engineering — Content of systems and software life cycle process information products (Documentation)
- ISO/IEC 15291 Information technology — Programming languages — Ada Semantic Interface SpecificationAda Semantic Interface SpecificationThe Ada Semantic Interface Specification is a layered, open architecture providing vendor-independent access to the Ada Library Environment. It allows for the static analysis of Ada programs and libraries.- References :...
(ASIS) - ISO 15403 Natural gas — Natural gas for use as a compressed fuel for vehicles
- ISO 15403-1 Designation of the quality
- ISO/IEC 15408 Information technology — Security techniques — Evaluation criteria for IT security
- ISO/IEC 15434 Information technology — Automatic identification and data capture techniques — Syntax for high-capacity ADC media
- ISO/IEC 15444 Information technology — JPEG 2000JPEG 2000JPEG 2000 is an image compression standard and coding system. It was created by the Joint Photographic Experts Group committee in 2000 with the intention of superseding their original discrete cosine transform-based JPEG standard with a newly designed, wavelet-based method...
image coding system - ISO/IEC 15445:2000 Information technology — Document description and processing languages — HyperText Markup Language (HTMLHTMLHyperText Markup Language is the predominant markup language for web pages. HTML elements are the basic building-blocks of webpages....
) - ISO 15489-1:2001 Information and documentation — Records management — Part 1: General
- ISO/TR 15489-2:2001 Information and documentation — Records management — Part 2: Guidelines
- ISO/IEC 15504 Information technology — Process assessment
- ISO 15614 Specification and qualification of welding procedures for metallic materials — Welding procedure test
- ISO 15686ISO 15686ISO 15686 is the in development ISO standard dealing with service life planning. It is a decision process which addresses the development of the service life of a building component, building or other constructed work like a bridge or tunnel...
Buildings and constructed assets — Service life planning - ISO/IEC 15693 Identification cards — Contactless integrated circuit cards — Vicinity cards
- ISO 15706 Information and documentation — International Standard Audiovisual Number (ISAN)
- ISO 15707 Information and documentation — International Standard Musical Work Code (ISWC)
- ISO 15836 Information and documentation — The Dublin CoreDublin CoreThe Dublin Core metadata terms are a set of vocabulary terms which can be used to describe resources for the purposes of discovery. The terms can be used to describe a full range of web resources: video, images, web pages etc and physical resources such as books and objects like artworks...
metadata element set - ISO/IEC 15897 Information technology — Procedures for registration of cultural elements
- ISO 15924ISO 15924ISO 15924, Codes for the representation of names of scripts, defines two sets of codes for a number of writing systems . Each script is given both a four-letter code and a numeric one....
Information and documentation — Codes for the representation of names of scripts - ISO 15930 Graphic technology — Prepress digital data exchange using PDF
- ISO/IEC 15948 Information technology — Computer graphics and image processing — Portable Network Graphics (PNG): Functional specification
- ISO 15970 Natural gas — Measurement of properties — Volumetric properties: density, pressure, temperature and compression factor
- ISO 15971ISO 15971ISO 15971 is an ISO standard for calorific value measurement of natural gas and its substitutes. The methods it covered does not involve gas composition determination and the related calculations....
:2008 Natural gas — Measurement of properties — Calorific value and Wobbe indexWobbe indexThe Wobbe Index or Wobbe number is an indicator of the interchangeability of fuel gases such as natural gas, liquified petroleum gas , and town gas and is frequently defined in the specifications of gas supply and transport utilities... - ISO 16134 Earthquake- and subsidence-resistant design of ductile iron pipelines
- ISO 16232 Road vehicles — Cleanliness of components of fluid circuits
- ISO 16232-8 Particle nature determination by microscopic analysis
- ISO 16232-9 Particle sizing and counting by automatic light extinction particle counter
- ISO 16232-10 Expression of results
- ISO/IEC 16262 Information technology — Programming languages, their environments and system software interfaces — ECMAScriptECMAScriptECMAScript is the scripting language standardized by Ecma International in the ECMA-262 specification and ISO/IEC 16262. The language is widely used for client-side scripting on the web, in the form of several well-known dialects such as JavaScript, JScript, and ActionScript.- History :JavaScript...
language specification - ISO/IEC 16500 Information technology — Generic digital audio-visual systems
- ISO 16549 Textiles — Unevenness of textile strands — Capacitance method
- ISO 16750ISO 16750ISO 16750, Road vehicles—Environmental conditions and electrical testing for electrical and electronic equipment, is an ISO standard which provides guidance regarding environmental conditions commonly encountered by electrical and electronic systems installed in automobiles...
Road vehicles — Environmental conditions and testing for electrical and electronic equipment - ISO/TS 16949 Quality management systems — Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
- ISO/TR 16982:2002 Ergonomics of human-system interaction — Usability methods supporting human-centred design
- ISO/IEC 17020:1998 General criteria for the operation of various types of bodies performing inspection
- ISO/IEC 17024ISO/IEC 17024ISO/IEC 17024:2003 is an International Standard which sets out criteria for an organization's certification program for individual persons.-ISO/IEC 17024:2003:...
:2003 Conformity assessment — General requirements for bodies operating certification of persons - ISO/IEC 17025ISO/IEC 17025ISO/IEC 17025 is the main standard used by testing and calibration laboratories. Originally known as ISO/IEC Guide 25, ISO/IEC 17025 was initially issued by the International Organization for Standardization in 1999. There are many commonalities with the ISO 9000 standard, but ISO/IEC 17025 adds in...
General requirements for the competence of testing and calibration laboratories - ISO 17202 Textiles — Determination of twist in single spun yarns — Untwist/retwist method
- ISO 17776 Petroleum and natural gas industries — Offshore production installations — Guidelines on tools and techniques for hazard identification and risk assessment
- ISO 17894 Ships and marine technology — Computer applications — General principles for the development and use of programmable electronic systems in marine applications
- ISO/IEC 18000ISO/IEC 18000ISO/IEC 18000 is an international standard that describes a series of diverse RFID technologies, each utilizing a unique frequency range.ISO/IEC 18000 consists of the following parts, under the general title Information technology — Radio frequency identification for item management:* Part 1:...
Information technology — Radio frequency identification for item management- ISO/IEC 18000-1 Reference architecture and definition of parameters to be standardized
- ISO/IEC 18000-2 Parameters for air interface communications below 135 kHz
- ISO/IEC 18000-3 Parameters for air interface communications at 13,56 MHz
- ISO/IEC 18000-4 Parameters for air interface communications at 2,45 GHz
- ISO/IEC 18000-6 Parameters for air interface communications at 860 MHz to 960 MHz
- ISO/IEC 18000-7 Parameters for active air interface communications at 433 MHz
- ISO/IEC 18004 Information technology — Automatic identification and data capture techniques — QR CodeQR CodeA QR code is a type of matrix barcode first designed for the automotive industry. More recently, the system has become popular outside of the industry due to its fast readability and comparatively large storage capacity. The code consists of black modules arranged in a square pattern on a white...
2005 bar code symbology specification - ISO/IEC 18009 Information technology — Programming languages — Ada: Conformity assessmentAda Conformity Assessment Test SuiteThe Ada Conformity Assessment Test Suite is the test suite used for Ada processor conformity testing.The preface to the test report includes the following:The second paragraph of the background of the current says:...
of a language processor - ISO/IEC 18013 Information technology — Personal identification — ISO-compliant driving license
- ISO/IEC 18013-1:2005 Physical characteristics and basic data set
- ISO/IEC 18013-2:2008 Machine-readable technologies
- ISO/IEC 18013-3:2009 Access control, authentication and integrity validation
- ISO/IEC 18014 Information technology — Security techniques — Time-stamping services
- ISO/IEC 18023 Information technology — SEDRISSedrisNote: SEDRIS used to be an acronym for Synthetic Environment Data Representation and Interchange Specification but it is currently used as a noun....
- ISO/IEC 18023-1:2006 Functional specification
- ISO/IEC 18023-2:2006 Abstract transmittal format
- ISO/IEC 18023-3:2006 Transmittal format binary encoding
- ISO/IEC 18024-4:2006 Information technology — SEDRIS language bindings — Part 4: C
- ISO/IEC 18025:2005 Information technology — Environmental Data Coding Specification (EDCS)
- ISO/IEC 18026 Information technology — Spatial Reference Model (SRM)
- ISO/IEC 18033 Information technology — Security techniques — Encryption algorithms
- ISO/IEC 18033-1 General
- ISO/IEC 18033-2 Asymmetric ciphers
- ISO/IEC 18033-3 Block ciphers
- ISO/IEC 18033-4 Stream ciphers
- ISO/IEC 18041-4 Information technology — Computer graphics, image processing and environmental data representation — Environmental Data Coding Specification (EDCS) language bindings — Part 4: C
- ISO/IEC 18042-4:2006 Information technology — Computer graphics and image processing — Spatial Reference Model (SRM) language bindings — Part 4: C
- ISO/IEC 18092 Information technology — Telecommunications and information exchange between systems — Near Field Communication — Interface and Protocol (NFCIP-1)
- ISO/TS 18152 Ergonomics of human-system interaction — Specification for the process assessment of human-system issues
- ISO 18185 Freight containers — Electronic seals
- ISO 18245ISO 18245ISO 18245 is an ISO standard concerning the assignment of Merchant Category Codes in retail financial services.These are used to control usage of corporate credit cards. MCCs are assigned by merchant type , with each merchant being assigned an MCC by the bank...
Retail financial services — Merchant category codeMerchant Category CodeA Merchant category code is a four-digit number assigned to a business by MasterCard or VISA when the business first starts accepting one of these cards as a form of payment. The MCC is used to classify the business by the type of goods or services it provides. In the US it can be used to...
s - ISO/TR 18529:2000 Ergonomics — Ergonomics of human-system interaction — Human-centred lifecycle process descriptions
- ISO 18629 Industrial automation systems and integration — Process specification language
- ISO 19005 Document management — Electronic document file format for long-term preservation
- ISO 19011ISO 19011ISO 19011 is an international standard that sets forth guidelines for:*quality management systems auditing*environmental management systems auditingIt is developed by the International Organization for Standardization....
Guidelines for quality and/or environmental management systemEnvironmental Management SystemEnvironmental management system refers to the management of an organization's environmental programs in a comprehensive, systematic, planned and documented manner....
s auditing - ISO 19092 Financial services — Biometrics — Security framework
- ISO 19101 Geographic information — Reference model
- ISO/TS 19103 Geographic information — Conceptual schema language
- ISO/TS 19104 Geographic information — Terminology
- ISO 19105 Geographic information — Conformance and testing
- ISO 19106 Geographic information — Profiles
- ISO 19107 Geographic information — Spatial schema
- ISO 19108 Geographic information — Temporal schema
- ISO 19109 Geographic information — Rules for application schema
- ISO 19110 Geographic information — Methodology for feature cataloguing
- ISO 19111 Geographic information — Spatial referencing by coordinates
- ISO 19112 Geographic information — Spatial referencing by geographic identifiers
- ISO 19113 Geographic information — Quality principles
- ISO 19114ISO 19114ISO 19114 Geographic information - Quality evaluation procedures provides a procedural framework for evaluating the quality of digital geographic datasets, consistent with the data quality principles defined in ISO 19113. It consists of three classes of conformance: one for quality evaluation, one...
Geographic information — Quality evaluation procedures - ISO 19115ISO 19115ISO 19115 "Geographic Information - Metadata" is a standard of the International Organization for Standardization . It is a component of the series of ISO 191xx standards for Geospatial metadata. ISO 19115 defines how to describe geographical information and associated services, including...
Geographic information — Metadata - ISO 19116 Geographic information — Positioning services
- ISO 19117 Geographic information — Portrayal
- ISO 19118 Geographic information — Encoding
- ISO 19119 Geographic information — Services
- ISO/TR 19120 Geographic information — Functional standards
- ISO/TR 19121 Geographic information — Imagery and gridded data
- ISO/TR 19122 Geographic information / Geomatics — Qualification and certification of personnel
- ISO 19123 Geographic information — Schema for coverage geometry and functions
- ISO 19125 Geographic information — Simple feature access
- ISO 19126 Geographic information — Feature concept dictionaries and registers
- ISO/TS 19127 Geographic information — Geodetic codes and parameters
- ISO 19128 Geographic information — Web map server interface
- ISO/TS 19129 Geographic information — Imagery, gridded and coverage data framework
- ISO/TS 19130 Geographic information — Imagery sensor models for geopositioning
- ISO 19131 Geographic information — Data product specifications
- ISO 19132 Geographic information — Location-based services — Reference model
- ISO 19133 Geographic information — Location-based services — Tracking and navigation
- ISO 19134 Geographic information — Location-based services — Multimodal routing and navigation
- ISO 19135 Geographic information — Procedures for item registration
- ISO 19136ISO 19136ISO 19136 Geographic information – Geography Markup Language, is a standard from the family ISO - of the standards for geographic information . It resulted from unification of the Open Geospatial Consortia definitions and Geography Markup Language with the ISO-191xx-Normen.Earlier versions of...
Geographic information — Geography Markup Language (GML) - ISO 19137 Geographic information — Core profile of the spatial schema
- ISO/TS 19138 Geographic information — Data quality measures
- ISO/TS 19139 Geographic information — Metadata — XML schema implementation
- ISO 19141 Geographic information — Schema for moving features
- ISO 19142 Geographic information — Web Feature Service
- ISO 19143 Geographic information — Filter encoding
- ISO 19144 Geographic information — Classification systems
- ISO 19146 Geographic information — Cross-domain vocabularies
- ISO 19439ISO 19439ISO 19439:2006 Enterprise integration -- Framework for enterprise modelling, is an international standard for enterprise modelling and enterprise integration developed by the International Organization for Standardization, based on CIMOSA and GERAM....
Enterprise integration — Framework for enterprise modelling - ISO 19440 Enterprise integration — Constructs for enterprise modelling
- ISO/IEC 19501 Information technology — Open Distributed Processing — Unified Modeling LanguageUnified Modeling LanguageUnified Modeling Language is a standardized general-purpose modeling language in the field of object-oriented software engineering. The standard is managed, and was created, by the Object Management Group...
(UML) Version 1.4.2 - ISO/IEC 19502 Information technology — Meta Object Facility (MOF)
- ISO/IEC 19503 Information technology — XML Metadata InterchangeXML Metadata InterchangeThe XML Metadata Interchange is an Object Management Group standard for exchanging metadata information via Extensible Markup Language .It can be used for any metadata whose metamodel can be expressed in Meta-Object Facility ....
(XMI) - ISO/IEC 19757 Information technology — Document Schema Definition LanguagesDocument Schema Definition LanguagesDocument Schema Definition Languages is a framework within which multiple validation tasks of different types can be applied to an XML document in order to achieve more complete validation results than just the application of a single technology....
(DSDL)- ISO/IEC 19757-2 Regular-grammar-based validation — RELAX NGRELAX NGIn computing, RELAX NG is a schema language for XML, based on Murata Makoto's RELAX and James Clark's TREX. A RELAX NG schema specifies a pattern for the structure and content of an XML document...
- ISO/IEC 19757-3 Rule-based validation — SchematronSchematronIn markup languages, Schematron is a rule-based validation language for making assertions about the presence or absence of patterns in XML trees...
- ISO/IEC 19757-4 Namespace-based Validation Dispatching LanguageNamespace-based Validation Dispatching LanguageNamespace-based Validation Dispatching Language is an XML schema language for validating XML documents that integrate with multiple namespaces. It is an ISO/IEC standard, and it is Part 4 of the DSDL schema specification. Much of the work on NVDL is based on the older Namespace Routing Language.-...
(NVDL)
- ISO/IEC 19757-2 Regular-grammar-based validation — RELAX NG
- ISO/IEC 19770 Information technology — Software asset management
- ISO/IEC 19785 Information technology — Common Biometric Exchange Formats Framework
- ISO/IEC 19790 Information technology — Security techniques — Security requirements for cryptographicCryptographyCryptography is the practice and study of techniques for secure communication in the presence of third parties...
modules - ISO/IEC 19794 Information technology — Biometric data interchange formats
- ISO/IEC 19794-1:2011 Framework
- ISO/IEC 19794-2:2005 Finger minutiae data
- ISO/IEC 19794-3:2006 Finger pattern spectral data
- ISO/IEC 19794-4:2005 Finger image data
- ISO/IEC 19794-5ISO/IEC 19794-5ISO/IEC 19794 Information technology — Biometric data interchange formats — Part 5: Face image data, or ISO/IEC 19794-5 for short, is the fifth of 8 parts of the ISO standard ISO/IEC 19794, published in 2005, which describes interchange formats for several types of biometric data...
:2005 Face image data - ISO/IEC 19794-6:2005 Iris image data
- ISO/IEC 19794-7:2007 Signature/sign time series data
- ISO/IEC 19794-8:2006 Finger pattern skeletal data
- ISO/IEC 19794-9:2007 Vascular image data
- ISO/IEC 19794-10:2007 Hand geometry silhouette data
ISO 20000–ISO 29999
- ISO/IEC 20000 Information technology — Service management
- ISO 20022ISO 20022ISO 20022 or UNIFI is the ISO Standard for Financial Services Messaging. It describes a Metadata Repository containing descriptions of messages and business processes, and a maintenance process for the Repository Content....
Financial services — UNIversal Financial Industry message scheme - ISO/IEC TR 20943 Information technology — Procedures for achieving metadata registry content consistency
- ISO/IEC TR 20943-1:2003 Data elements
- ISO/IEC TR 20943-3:2004 Value domains
- ISO/IEC 21000 Information technology — Multimedia framework (MPEG-21)
- ISO/IEC 21481 Information technology — Telecommunications and information exchange between systems — Near Field Communication Interface and Protocol -2 (NFCIP-2)
- ISO 21482 Ionizing-radiation warning — Supplementary symbol
- ISO 22000ISO 22000ISO 22000 is a standard developed by the International Organization for Standardization dealing with food safety. This is a general derivative of ISO 9000.-Food safety:...
Food safety management systems — Requirements for any organization in the food chain - ISO/TS 22003 Food safety management systems — Requirements for bodies providing audit and certification of food safety management systems
- ISO 22093 Industrial automation systems and integration — Physical device control — Dimensional Measuring Interface Standard (DMIS)
- ISO 22241 Diesel engines — NOx reduction agent AUS 32
- ISO 22241-1 Quality requirements
- ISO 22241-2 Test methods
- ISO 22241-3 Handling, transportation and storing
- ISO/IEC TR 22250 Information technology — Document description and processing languages — Regular Language Description for XMLRegular Language description for XMLREgular LAnguage description for XML is a specification for describing XML-based languages.A description written in RELAX is called a RELAX grammar....
(RELAX)- ISO/IEC TR 22250-1:2002 RELAXRelaxRelax may refer to:In music:Albums*Relax , a 2003 album by Blank & Jones*Relax , a 2011 album by Das RacistSongs* "Relax" by Frankie Goes to Hollywood...
Core
- ISO/IEC TR 22250-1:2002 RELAX
- ISO/PAS 22399:2007 Societal security — Guideline for incident preparedness and operational continuity management
- ISO 22716:2007 Cosmetics — Good Manufacturing Practices (GMP) — Guidelines on Good Manufacturing Practices
- ISO/IEC 23003 Information technology — MPEG audio technologies
- ISO/IEC 23003-1 MPEG SurroundMPEG SurroundMPEG Surround , also known as Spatial Audio Coding is a lossy compression format for surround sound that provides a method for extending mono or stereo audio services to multi-channel audio in a backwards compatible fashion...
- ISO/IEC 23003-2 Spatial Audio Object Coding (SAOC)
- ISO/IEC 23003-1 MPEG Surround
- ISO/IEC 23270 Information technology — Programming languages — C#
- ISO/IEC 23360 Linux Standard BaseLinux Standard BaseThe Linux Standard Base is a joint project by several Linux distributions under the organizational structure of the Linux Foundation to standardize the software system structure, including the filesystem hierarchy, used with Linux operating system...
(LSB) core specification 3.1- ISO/IEC 23360-1 Generic specification
- ISO/IEC 23360-2 Specification for IA32 architecture
- ISO/IEC 23360-3 Specification for IA64 architecture
- ISO/IEC 23360-4 Specification for AMD64 architecture
- ISO/IEC 23360-5 Specification for PPC32 architecture
- ISO/IEC 23360-6 Specification for PPC64 architecture
- ISO/IEC 23360-7 Specification for S390 architecture
- ISO/IEC 23360-8 Specification for S390X architecture
- ISO 23733 Textiles — Chenille yarns — Test method for the determination of linear density
- ISO 23950 Information and documentation — Information retrieval (Z39.50) — Application service definition and protocol specification
- ISO/IEC 24707:2007 Information technology — Common LogicCommon logicCommon logic is a framework for a family of logic languages, based on first-order logic, intended to facilitate the exchange and transmission of knowledge in computer-based systems....
(CL): a framework for a family of logic-based languages - ISO/IEC 24727ISO/IEC 24727ISO/IEC 24727 is the first international standard to address the need for creation of a layered framework to support interoperability of smart cards providing identification, authentication, and signature services....
Identification cards — Integrated circuit card programming interfaces- ISO/IEC 24727-1 Architecture
- ISO/IEC 24727-2 Generic card interface
- ISO/IEC 24727-3 Application interface
- ISO/IEC 24727-4 Application programming interface (API) administration
- ISO/IEC 24727-5 Testing procedures
- ISO/IEC 24727-6 Registration authority procedures for the authentication protocols for interoperability
- ISO/IEC 24744ISO/IEC 24744ISO/IEC 24744 Software Engineering — Metamodel for Development Methodologies is an ISO standard for software engineering metamodelling for development methodologies...
:2007 Software Engineering — Metamodel for Development Methodologies - ISO/IEC 24762:2008 Information technology — Security techniques — Guidelines for information and communications technology disaster recovery services
- ISO 26000ISO 26000ISO, the International Organization for Standardization, has launched an International Standard providing guidelines for social responsibility named ISO 26000 or simply ISO SR and was released on 1 November 2010.-Guidance without certification:...
Guidance on social responsibility - ISO/IEC 26300 Information technology — Open Document Format for Office Applications (OpenDocumentOpenDocumentThe Open Document Format for Office Applications is an XML-based file format for representing electronic documents such as spreadsheets, charts, presentations and word processing documents....
) v1.0 - ISO/IEC 27000ISO/IEC 27000ISO/IEC 27000 is part of a growing family of ISO/IEC Information Security Management Systems standards, the 'ISO/IEC 27000 series'. ISO/IEC 27000 is an international standard entitled: Information technology — Security techniques — Information security management systems —...
Information technology — Security techniques — Information security management systems — Overview and vocabulary - ISO/IEC 27001ISO/IEC 27001ISO/IEC 27001, part of the growing ISO/IEC 27000 family of standards, is an Information Security Management System standard published in October 2005 by the International Organization for Standardization and the International Electrotechnical Commission...
Information technology — Security techniques — Information security management systems — Requirements - ISO/IEC 27002ISO/IEC 27002ISO/IEC 27002 is an information security standard published by the International Organization for Standardization and by the International Electrotechnical Commission , entitled Information technology - Security techniques - Code of practice for information security management.ISO/IEC 27002:2005...
Information technology — Security techniques — Code of practice for information security management - ISO/IEC 27003ISO/IEC 27003ISO/IEC 27003, part of a growing family of ISO/IEC ISMS standards, the 'ISO/IEC 27000 series', is an information security standard published by the International Organization for Standardization and the International Electrotechnical Commission...
Information technology — Security techniques — Information security management system implementation guidance - ISO/IEC 27004ISO/IEC 27004ISO/IEC 27004:2009, part of a growing family of ISO/IEC ISMS standards, the 'ISO/IEC 27000 series', is an information security standard developed by the International Organization for Standardization and the International Electrotechnical Commission...
Information technology — Security techniques — Information security management — Measurement - ISO/IEC 27005ISO/IEC 27005ISO/IEC 27005, part of a growing family of ISO/IEC ISMS standards, the 'ISO/IEC 27000 series', is an information security standard published by the International Organization for Standardization and the International Electrotechnical Commission...
Information technology — Security techniques — Information security risk management - ISO/IEC 27006ISO/IEC 27006ISO/IEC 27006, part of a growing family of ISO/IEC Information Security Management System standards, the 'ISO/IEC 27000 series', is an information security standard published by the International Organization for Standardization and the International Electrotechnical Commission...
Information technology — Security techniques — Requirements for bodies providing audit and certification of information security management systems - ISO/IEC 27011 Information technology — Security techniques — Information security management guidelines for telecommunications organizations based on ISO/IEC 27002
- ISO/TS 27687:2008 Nanotechnologies — Terminology and definitions for nano-objects — Nanoparticle, nanofibre and nanoplate
- ISO 28000 Specification for security management systems for the supply chain
- ISO 28003 Security management systems for the supply chain — Requirements for bodies providing audit and certification of supply chain security management systems
- ISO 28004 Security management systems for the supply chain — Guidelines for the implementation of ISO 28000
- ISO/IEC 29500 Information technology — Document description and processing languages — Office Open XML File Formats
- ISO/IEC 29500-1 Fundamentals and Markup Language Reference
- ISO/IEC 29500-2 Open Packaging ConventionOpen Packaging ConventionThe Open Packaging Conventions is a container-file technology initially created by Microsoft to store a combination of XML and non-XML files that together form a single entity such as an Open XML Paper Specification document...
s - ISO/IEC 29500-3 Markup Compatibility and Extensibility
- ISO/IEC 29500-4 Transitional Migration Features
ISO 30000–ISO 39999
- ISO 30000:2009 Ships and marine technology — Ship recycling management systems — Specifications for management systems for safe and environmentally sound ship recycling facilities
- ISO 31000ISO 31000ISO 31000 is intended to be a family of standards relating to risk management codified by the International Organization for Standardization. The purpose of ISO 31000:2009 is to provide principles and generic guidelines on risk management...
Risk managementRisk managementRisk management is the identification, assessment, and prioritization of risks followed by coordinated and economical application of resources to minimize, monitor, and control the probability and/or impact of unfortunate events or to maximize the realization of opportunities...
— Principles and guidelines - ISO 32000 Document management — Portable document formatPortable Document FormatPortable Document Format is an open standard for document exchange. This file format, created by Adobe Systems in 1993, is used for representing documents in a manner independent of application software, hardware, and operating systems....
- ISO/IEC 38500ISO/IEC 38500The ISO/IEC 38500 Corporate governance of information technology standard, provides a framework for effective governance of IT to assist those at the highest level of organizations to understand and fulfill their legal, regulatory, and ethical obligations in respect of their organizations’ use of...
Corporate governance of information technology
ISO 80000
- ISO/IEC 80000ISO/IEC 80000International standard ISO 80000 or IEC 80000—depending on which of the two international standards bodies International Organization for Standardization and International Electrotechnical Commission is in charge of each respective part—is a style guide for the use of physical quantities and units...
Quantities and units - ISO/TS 80004ISO/TS 80004The ISO/TS 80004 series of standards, from the International Standards Organization, describe vocabulary for nanotechnology and its applications. These were largely motivated by health, safety and environment concerns, many of them originally elaborated by Eric Drexler in his 1985 Engines of...
Nanotechnologies — Vocabulary- ISO/TS 8004-1 Core terms
- ISO/TS 8004-3 Carbon nano-objects
- ISO/TS 8004-4 Nanostructured materials
- ISO/TS 8004-5 Nano/bio interface
- ISO/TS 8004-7 Diagnostics and therapeutics for healthcare
See also
- International Classification for StandardsInternational Classification for StandardsInternational Classification for Standards is an international classification system for technical standards. It is designed to cover every economic sector and virtually every activity of the humankind where technical standards may be used....
- List of ASTM International standards
- List of DIN standards
- List of EN standards
- List of IEC standards