Messerschmitt Bf 109 variants
Encyclopedia
Due to the Messerschmitt Bf 109
's versatility and time in service with both the Luftwaffe and other foreign air forces, numerous variants were produced over the eight years of service with the Luftwaffe
and even more were produced by its foreign users.
The Bf 109A was the first version of the Bf 109. Armament was initially planned to be only two cowl-mounted 7.92 mm (.312 in) MG 17 machine gun
s. However, possibly due to the introduction of the Hurricane and Spitfire, each with eight 7.7 mm (.303 in) machine guns, experiments were carried out with a third machine gun firing through the propeller shaft. V4 and some A-0 were powered by a 640 PS (631 hp, 471 kW) Junkers Jumo Jumo 210B
engine driving a two-blade fixed-pitch
propeller, but production was changed to the 670 PS (661 hp, 493 kW) Jumo 210D as soon as it became available. The A-0 were not of a uniform type but saw several changes in their appearance. Visible changes included engine, cockpit and machine gun ventilation holes/slats, and the location of the oil
cooler was changed several times to prevent overheating. Many of these Bf 109 A-0 served with the Legion Condor
and were often misidentified as B-series aircraft, and probably served in Spain with the tactical markings 6-1 to 6-16. One A-0, marked as 6-15, ran out of fuel and was forced to land behind enemy lines. It was captured by Republican
troops on 11 November 1937 and later transferred to the Soviet Union for a closer inspection. 6-15 incorporated several improvements from the Bf 109B production program and had been prepared to use a variable-pitch propeller
although it had not been installed.
According to RLM documentation 22 aircraft were ordered and delivered with V4 as the A-series prototype.
The first Bf 109 in serial production, the Bf 109B , was fitted with the 670 PS (661 hp, 493 kW) Jumo 210D engine driving a two-bladed fixed-pitch propeller. During the B-1 production run a variable pitch propeller was introduced and often retrofitted to older aircraft; these were then unofficially known as B-2s. Both versions saw combat with the Legion Condor during the Spanish Civil War
, although it was apparent that the armament was still inadequate. Several aircraft were produced with an engine-mounted machine gun but it was very unreliable, most likely because of engine vibrations and overheating. Thus the Bf 109 V8 was constructed to test the fitting of two more machine guns in the wings; however, results showed that the wing needed strengthening. In the following V9 prototype both wing guns were replaced by 20 mm MG FF cannons.
A total of 341 Bf 109B of all versions were built by Messerschmitt, Fieseler
, and Erla.
The short-lived Bf 109C was powered by a 700 PS (690 hp, 515 kW) Jumo 210G engine with direct fuel injection. Another important change was a strengthened wing, now carrying two more machine guns giving four 7.92 mm (.312 in) MG 17s in total. The C-0 were pre-production aircraft, the C-1 was the production version, and the C-2 was an experimental version with an engine-mounted machine gun. The C-3 was planned with 20 mm MG FF cannon
s replacing the two MG 17s in the wings, but it is not known how many C-3 (if any) were built or converted. The C-4 was planned to have an engine-mounted Motorkanone MG FF, but the variant was not produced.
A total of 58 Bf 109C of all versions were built by Messerschmitt.
The next model, the V10 prototype, was identical to the V8, except for its Jumo 210G engine. The V10, V11, V12 and V13 prototypes were built using Bf 109B airframes, and tested the DB600A engine with the hope of increasing the performance of the aircraft. The DB600A was dropped as the improved DB601A
with direct fuel injection was soon to become available.
Developed from the V10 and V13 prototypes, the Bf 109D was the standard version of the Bf 109 in service with the Luftwaffe during the period just before World War II. Despite this, the type saw only limited service during the war, as all of the 235 Bf 109D still in service at the beginning of the Poland Campaign
were rapidly taken out of service and replaced by the Bf 109E, except in some night fighter
units where some examples were used into early-1940. Variants included D-0 and D-1 models, both having a Junkers Jumo 210D engine and armed with two wing-mounted and two nose-mounted 7.92 mm (.312 in) MG 17s.> The D-2 was an experimental version with an engine-mounted machine gun, but as previously tried, this installation failed. The D-3 was similar to the C-3 but with two 20 mm MG FFs in the wings.
A total of 647 Bf 109D of all versions were built by Focke-Wulf, Erla, Fieseler, Arado and AGO. Messerschmitt is listed as having produced only four Bf 109D, probably the D-0 preproduction series with the serial production transferred to licensed manufacturers. Several Bf 109D were sold to Hungary and Switzerland.
A engine was used, yielding an extra 223 kW (300 hp) at the cost of an additional 181 kg (400 lb). To test the new 1,100 PS (1,085 hp, 809 kW) DB601A
engine, two more prototypes (V14 and V15) were built, each differing in their armament. While the V14 was armed with two 7.92 mm (.312 in) MG 17s above the engine and one 20 mm MG FF in each wing, the V15 was fitted with the two MG 17s mounted above the engine only. After test fights the V14 was considered more promising and a pre-production batch of 10 E-0 was ordered. Batches of both E-1 and E-3 variants were shipped to Spain for evaluation, and received their baptism of fire in the final phases of the Spanish Civil War.
) which was different in some small details, most notably by using the modified 20 mm MG-FF/M wing cannon and having improved head armor for the pilot. With the MG FF/M it was possible to fire a new and improved type of explosive shell, called Minengeschoß (or 'mine-shell') which was made using drawn steel (the same way brass cartridges
are made) instead of being cast as was the usual practice. This resulted in a shell with a thin but strong wall, which had a larger cavity in which to pack a much larger explosive charge than was otherwise possible. The new shell required modifications to the MG FF's mechanism due to the different recoil characteristics, hence the MG FF/M designation.
The cockpit canopy was also revised to an easier-to-produce, "squared-off" design, which also helped improve the pilot's field of view. This canopy, which was also retrofitted to many E-1s and E-3s, was largely unchanged until the introduction of a welded, heavy-framed canopy on the G series in the autumn of 1942. The E-4 would be the basis for all further Bf 109E developments. Some E-4 and later models received a further improved 1,175 PS (1,159 hp, 864 kW) DB601N
high-altitude engine; known as the E-4/N this first appeared in July 1940. The E-4 was also available as a fighter-bomber with equipment very similar to the previous E-1/B. It was known as E-4/B (DB 601Aa engine) and E-4/BN (DB 601N engine). A total of 561 of all E-4 versions were built, including 250 E-4, 20 E-4/N, 211 E-4/B and 15 E-4/BN.
, usually a 300 L (80 US gal) capacity unit mounted on a rack under the fuselage, which increased their range to 1,325 km (820 mi). Alternatively, a bomb could be fitted and the E-7 could be used as a Jabo fighter-bomber. Previous Emil subtypes were progressively retrofitted with the necessary fittings for carrying a drop tank from October 1940. Early E-7s were fitted with the 1,100 PS DB 601A or 1,175 PS DB 601Aa engine, while late-production ones received 1,175 PS DB 601N engines with improved altitude performance – the latter was designated as E-7/N. A total of 438 E-7s of all variants were built.
Bf 109E variants and sub-variants
Prior to the war the German Navy
had become fascinated with the idea of the aircraft carrier
. Borrowing ideas from the British
and Japan
ese (mainly ), they started the construction of as part of the rebuilding of the navy. The air group for the carrier was settled on Messerschmitt Bf 109T fighters and Ju 87C
dive bombers. The suffix 'T' denotes carrier, 'Träger', in German use.
Despite references to a Bf 109 T-0 version. this version never existed. Seven earlier versions (Bf 109 B, Bf 109 C, Bf 109 E) were converted to test carrier equipment. This included, adding a tail-hook, catapult fittings and increasing the wingspan to 11.08 m (36.35 ft). The ailerons were increased in span, as were the slats, and flap travel was increased. The wings were not modified to be folding since the ship Graf Zeppelin was designed around the intended aircraft, so the lifts could accommodate the Bf 109T with its 11 m (36 ft) wingspan. The wings could, however, be detached from the fuselage for transport purposes, as in every version of the Bf 109.
Following flight tests, especially the catapult tests, 70 T-1 with DB601Ns were to be produced at Fieseler
in Kassel, but after seven T-1s were built, the carrier project was canceled. The remaining 63 of 70 T-1s were built as T-2s without carrier equipment and some of the T-1s may have been "upgraded" to T-2 standard. It was found that the performance of the T-2 was closely comparable to the E-4/N and, because of its ability to take off and land in shorter distances, these fighters were assigned to I/JG.77
, deployed in Norway on landing strips which were both short and subject to frequent, powerful cross-winds. At the end of 1941 the unit was ordered to return their aircraft to Germany and received E-3s as replacements. The armament of the Bf 109T consisted of two 7.92 mm (.312 in) MG 17s above the engine and one 20 mm MG FF/M cannon in each wing.
Interest in Graf Zeppelin revived when the value of aircraft carriers became obvious, and in 1942 the ship was back in the yards for completion. By this time the Bf 109T was hopelessly outdated and a new fighter would be needed. Messerschmitt responded with the updated Me 155A series, but work on the ship was again canceled and the Me 155 was later re-purposed as a high-altitude interceptor. Design work was transferred to Blohm & Voss and the aircraft was then known as the BV 155.
The Bf 109Ts were issued to several training units in 1943. Then, in April 1943 the Jagdstaffel Helgoland was formed and operated from Düne until late 1943 when the unit transferred to Lister in south Norway. The unit was re-named as 11./JG 11 as of 30 November 1943 and the Bf 109Ts remained in operations until the summer of 1944, after which some were used in training units in Germany.
, was developed for use with the Bf 109. The engineers at the Messerschmitt facilities took two Bf 109 E-1 airframes and installed this new powerplant. The first two prototypes, V21 (Werksnummer (Works number) or W.Nr 5602) and V22 (W.Nr 1800) kept the trapeziform
wing shape from the E-1, but the span was reduced by 61 cm (2 ft) by "clipping" the tips. Otherwise the wings incorporated the cooling system modifications described below. V22 also became the testbed for the pre-production DB 601E. The smaller wings had a detrimental effect on the handling so V23, Stammkennzeichen (factory CodeThese factory codes were used by all second line aircraft such as trainers, communication, some Air Service aircraft and others not engaged in operational use.Stammkennzeichen) CE+BP, W.Nr 5603, was fitted with new, semi-elliptical wing
tips. The fourth prototype, V24 VK+AB, W.Nr 5604, flew with the clipped wings but featured a modified, "elbow"-shaped supercharger
air-intake which was eventually adopted for production, and a deeper oil cooler bath beneath the cowling. On all of these prototypes the fuselage was cleaned up and the engine cowling modified to improve aerodynamics.
, now blended smoothly into the new engine cowling. Underneath the cowling was a revised, more streamlined oil cooler radiator and fairing. A new ejector exhaust arrangement was incorporated, and on later aircraft a metal shield was fitted over the left hand banks to deflect exhaust fumes away from the supercharger air-intake. The supercharger air-intake was, from the F-1 -series onwards, a rounded, "elbow"-shaped design that protruded further out into the airstream. A new three-blade, light-alloy VDM propeller unit with a reduced diameter of 3 m (9 ft 8.5 in) was used. Propeller pitch was changed electrically, and was regulated by a constant-speed unit, though a manual override was still provided. Thanks to the improved aerodynamics, more fuel-efficient engines and the introduction of light-alloy drop tanks, the Bf 109F offered a much increased maximum range of 1,700 km (1,060 mi) compared to the Bf 109E's maximum range of 660 km (410 mi).
The canopy stayed essentially the same as that of the E-4 although the handbook for the 'F' stipulated that the forward, lower triangular panel to starboard was to be replaced by a metal panel with a port for firing signal flares. Many F-1s and F-2s kept this section glazed. A two-piece, all-metal armour plate head shield was added, as on the E-4, to the hinged portion of the canopy, although some lacked the curved top section. A bullet-resistant windscreen could be fitted as an option. The fuel tank was self-sealing, and around 1942 Bf 109Fs were retrofitted with additional armour made from layered light-alloy plate just aft of the pilot and fuel tank. The fuselage aft of the canopy remained essentially unchanged in its externals.
The tail section of the aircraft was redesigned as well. The rudder was slightly reduced in area and the symmetrical fin section changed to an airfoil
shape, producing a sideways lift force that swung the tail slightly to the left. This helped increase the effectiveness of the rudder, and reduced the need for application of right rudder on takeoff to counteract torque effects from the engine and propeller. The conspicuous bracing struts were removed from the horizontal tailplane
s which were relocated to slightly below and forward of their original positions. A semi-retractable tailwheel was fitted and the main undercarriage legs were raked forward by six degrees to improve the ground handling. An unexpected structural flaw of the wing and tail section was revealed as the first Bf 109Fs were rushed into service; some aircraft crashed or nearly crashed, with either the wing surface wrinkling or fracturing, or by the tail structure failing. In one such accident, the commander of JG 2 "Richthofen", Wilhelm Balthasar
lost his life when he was attacked by a Spitfire during a test flight. While making an evasive manoeuvre, the wings broke away and Balthasar was killed when his aircraft hit the ground. Slightly thicker wing skins and reinforced spars dealt with the wing problems. Tests were also carried out to find out why the tails had failed, and it was found that at certain engine settings a high-frequency oscillation
in the tailplane spar was overlapped by harmonic
vibrations from the engine; the combined effect being enough to cause structural failure at the rear fuselage/fin attachment point. Initially two external stiffening plates were screwed onto the outer fuselage on each side, and later the entire structure was reinforced.
The entire wing was redesigned, the most obvious change being the new quasi-elliptical wingtips, and the slight reduction of the aerodynamic area to 16.05 m² (172.76 ft²). Other features of the redesigned wings included new leading edge slats
, which were slightly shorter but had a slightly increased chord
; and new rounded, removable wingtips which changed the planview of the wings and increased the span slightly over that of the E-series. Frise-type ailerons replaced the plain ailerons of the previous models. The 2R1 profile was used with a thickness-to-chord ratio of 14.2% at the root reducing to 11.35% at the last rib. As before, dihedral was 6° 32'.
The wing radiators were shallower and set farther back on the wing. A new cooling system was introduced which was automatically regulated by a thermostat with interconnected variable position inlet and outlet flaps that would balance the lowest drag possible with the most efficient cooling. A new radiator, shallower but wider than that fitted to the E was developed. A boundary layer
duct allowed continual airflow to pass through the airfoil above the radiator ducting and exit from the trailing edge of the upper split flap. The lower split flap was mechanically linked to the central "main" flap, while the upper split flap and forward bath lip position were regulated via a thermostatic valve which automatically positioned the flaps for maximum cooling effectiveness. In 1941 "cutoff" valves were introduced which allowed the pilot to shut down either wing radiator in the event of one being damaged; this allowed the remaining coolant to be preserved and the damaged aircraft returned to base. However, these valves were delivered to frontline units as kits, the number of which, for unknown reasons, was limited. These cutoff valves were later factory standard fitting for Bf 109G and K series.
criticised the light armament as inadequate for the average pilot, while Major Walter Oesau
preferred to fly a Bf 109E, and Oberst Werner Mölders
saw the single centreline gun as an improvement.
With the early tail unit problems out of the way, pilots generally agreed that the F series was the best-handling of all the Bf 109 series. Mölders flew one of the first operational Bf 109F-1s over England from early October 1940; he may well have been credited with shooting down eight Hurricanes and four Spitfires while flying W.No 5628, Stammkennzeichen SG+GW between 11 October and 29 October 1940.
in October 1940 with JG 51. The most experienced fighter aces like Werner Mölders
were the first ones to fly the first Bf 109 F-1s in combat in October 1940. A total of 208 F-1s were built between August 1940 and February 1941 by Messerschmitt Regensburg and the Wiener Neustädter Flugzeugwerke.
The F-2 introduced the 15 mm Mauser MG 151 cannon
with 200 rounds. The Motorkanone was supplemented by two synchronized 7.92 mm (.312 in) MG 17 machine guns mounted under the engine cowl, with 500 rpg. As the harder-hitting 20 mm version of the same gun become available, a number of F-2s were retrofitted with it in the field. About 1,380 F-2s were built between October 1940 and August 1941 by AGO, Arado, Erla, Messerschmitt Regensburg and WNF. No tropicalized version was built, although individual F-2s were retrofitted with sand filters in the field. The maximum speed of the F-1 and F-2 was 615 km/h (382 mph) at rated altitude.
The 1,350 PS (1,332 hp, 993 kW) DB 601E was used in the F-3 and F-4 model together with a VDM 9-12010 propeller with broader blades for improved altitude performance. The DB 601 E was initially restricted to 1,200 PS (1,184 hp, 883 kW) at 2,500 rpm; however, the full rating of 1,350 PS at 2,500 rpm was cleared for service use by February 1942. The DB 601 E was able to use 87 octane "B-4" aviation fuel, despite its increased performance; while the earlier DB 601N ran on 100 octane designated as "C-3" by the Luftwaffe.
Only 15 examples of the F-3 are believed to have been produced by Messerschmitt Regesnburg between October 1940 and January 1941. Like the F-1, the F-3 was armed with the 20 mm MG-FF/M and two 7.92 mm (.312 in) MG 17s.
From the F-4 onward, the new 20 mm Mauser MG 151/20 with 200 rounds was used as the motorkanone. The first F-4s reached frontline units in June 1941. Production lasted exactly a year between May 1941 and May 1942, with 1,841 of all F-4 variants produced. Some of the later models were capable of mounting two 20 mm MG 151/20 cannons under the wing in faired gondolas with 135 rpg. These were designated F-4/R1 and 240 of them were produced by W.N.F. in the first quarter of 1942. This optional additional armament was standardized as field kit for later G and K series. A special high-altitude variant, the F-4/Z featuring GM-1
boost, was also built with a production run of 544 in the first quarter of 1942 and saw extensive use. Finally, the Erla factory produced 576 tropicalized F-4 trop in the first half of 1942.
With its initial engine rating of 1,200 PS, the maximum speed of the F-4 (and F-3) was 635 km/h (394 mph) at rated altitude; and with the clearance of the full rating of 1,350 PS, maximum speed increased to 670 km/h (420 mph).
bypass outlets, which had been a feature of the F-series, on the upper radiator flaps.
Like most German aircraft produced in World War II, the Bf 109 G-series was designed to adapt to different operational tasks with greater versatility; larger modifications to fulfil a specific mission task like long-range recon or long-range fighter-bomber were with "Rüststand" and given a "/R" suffix, smaller modifications on the production line or during overhaul like equipment changes were made with kits of pre-packaged parts known as Umrüst-Bausätze, usually contracted to Umbau and given a "/U" suffix. Field kits known as Rüstsätze were also available but those did not change the aircraft designation. Special high-altitude interceptors with GM-1
nitrous oxide injection high-altitude boost and pressurized
cockpits were also produced.
The newly fitted Daimler-Benz DB 605
A engine was a development of the DB 601E engine utilised by the preceding Bf 109F-4; displacement
and compression ratio
were increased as well as other detail improvements. Takeoff and emergency power of 1,475 PS (1,455 hp, 1,085 kW) was achieved with 1.42 atm
of boost at 2,800 rpm. The DB605 suffered from reliability problems during the first year of operation, and this output was initially banned by VT-Anw.Nr.2206, forcing Luftwaffe units to limit maximum power output to 1,310 PS (1,292 hp, 964 kW) at 2,600 rpm and 1.3 atm manifold pressure. The full output was not reinstated until 8 June 1943 when Daimler-Benz issued a technical directive. Up to 1944, the G-series was powered by the 1,475 PS Daimler-Benz DB 605 driving a three-blade VDM 9-12087A variable-pitch propeller with a diameter of 3 m (9.8 ft) with even broader blades than used on the F-series. Pitch control, as on the 109F, was either "electro-mechanical"" (automatic) or "manual-electric" using a thumb-switch on the throttle lever. From 1944 a new high-altitude propeller with broader blades was introduced, designated VDM 9-12159, and was fitted to high-altitude variants with the DB 605AS or D-series engines.
The early versions of the Bf 109G closely resembled the Bf 109 F-4 and carried the same basic armament; however, as the basic airframe was modified to keep pace with different operational requirements, the basically clean design began to change. From the spring of 1943, the G-series saw the appearance of bulges in the cowling when the 7.92 mm (.312 in) MG 17 were replaced with 13 mm (.51 in) MG 131 machine gun
s (G-5 onwards) due to the latter's much larger breechblock
, and on the wings (due to larger tyres), leading to the Bf 109 G-6's nickname "Die Beule" ("The Bulge"). The Bf 109G continued to be improved: new clear-view cockpits, greater firepower in the form of the 30 mm (1.18 in) MK 108 cannon were introduced in late 1943; and a new, enlarged supercharger for the DB605, a larger vertical stabilizer (G-5 onwards), and MW 50
power boost in 1944.
Erich Hartmann
, the World's top scoring fighter ace, claiming 352 victories, flew only the Bf 109G, of which he said:
From the Bf 109 G-5 on an enlarged wooden tail unit (identifiable by a taller vertical stabilizer and rudder with a morticed
balance tab, rather than the angled shape) was often fitted. This tail unit was standardised on G-10s and K-4s. Although the enlarged tail unit improved handling, especially on the ground, it weighed more than the standard metal tail unit and required that a counterweight was fitted in the nose, increasing the variant's overall weight.
With the Bf 109G, a number of special versions were introduced to cope with special mission profiles. Here, long-range fighter-reconnaissance and high-altitude interceptors can be mentioned. The former were capable of carrying two 300 L (80 US gal) drop tanks, one under each wing; and the latter received pressurized cockpits for pilot comfort and GM-1
nitrous oxide "boost" for high altitudes. The latter system, when engaged, was capable of increasing engine output by 223 kW above the rated altitude to increase high-altitude performance.
capsules were placed in each pane of the windscreen and opening canopy to absorb any moisture which may have been trapped in the double glazing
. The last 80 G-1s built were lightweight G-1/R2. In these GM-1 nitrous oxide 'boost' was used, and the pilot's back armour was removed, as were all fittings for the long-range drop tank. A few G-1 flown by I./JG 1 are known to have carried the underwing 20 mm MG 151/20 cannon gondolas.
The G-2, which started production in May 1942, lacked the cabin pressurization and GM-1 installation. Performance-wise it was identical to the G-1. The canopy reverted to one layer of glazing
and incorporated the angled head armour used on the F-4, although several G-2 had the vertical type as fitted to the G-1. Several Rüstsätze could be fitted, although installing these did not change the designation of the aircraft. Instead the "/R" suffix referred to the G-2's Rüstzustand or equipment condition of the airframe, which was assigned at the factory rather than in the field. There were two Rüstzustand planned for G-2s:
The rack and internal fuel lines for carrying a 300 L (80 US gal) drop-tank were widely used on G-2s, as were the underwing 20 mm MG 151/20 cannon gondolas. Several G-2s were fitted with the ETC 500 bomb rack, capable of carrying one 250 kg (550 lb) bomb. The final G-2 production batches built by Erla and Messerschmitt Regensburg
were equipped as tropical aircraft (often referred to as G-2 trop), equipped with a sand-filter on the front of the supercharger intake and two small, teardrop-shaped metal brackets on the left side of the fuselage, below the cockpit sill. These were used as mounts for specially designed sun umbrellas (called Sonderwerkzeug or Special tool), which were used to shade the cockpit.
A total of 167 G-1s were built between February and June 1942, 1,586 G-2s between May 1942 and February 1943, and one further G-2 was built in Győr, Hungary, in 1943. Maximum speed of the G-2 was 537 km/h (334 mph) at sea level and 660 km/h (410 mph) at 7,000 m (22,970 ft) rated altitude with the initial reduced 1.3 atm rating. Performance of the G-1 was similar, but above rated altitude the GM-1 system it was equipped with could be used to provide an additional 350 horsepower. With his G-1/R2, pilot R. Klein achieved 660 km/h (420 mph) at 12,000 m (39,370 ft), and a ceiling of 13,800 m (45,275 ft).
The following variants of the G-1 and G-2 were produced:
VHF
radio set, which provided much clearer radio transmissions and had three-times the range of the earlier HF
sets. Externally this could be recognised by the position of the fuselage antenna lead-in which was moved further aft to between frames seven and eight on the fuselage spine. Due to the steady weight increases of the 109, from the spring of 1943 larger 660 x 160 mm (26 x 6.3 in) mainwheels were introduced, replacing the previously used 650 x 150 mm (25.6 x 6 in) type. The undercarriage legs were altered so that the wheel's vertical axis was nearly upright rather than being parallel with the oleo
leg. These changes resulted in the fitting of teardrop-shaped fairings to the upper wing surface above the wheel-wells to accommodate the upper part of the mainwheels. The larger wheels and fairings were often retrofitted to G-2s.The last production G-2s were fitted with the enlarged mainwheels and tailwheel while the first of the G-4s used the smaller wheels. In addition, a larger 350 x 135 mm (14 x 5 in) tailwheel replaced the original 290 x 110 mm (11 x 4 in) one; the larger tailwheel no longer fitted the recess, so the retraction mechanism was disconnected and the tailwheel fixed down. Up to July 1943, 1,242 G-4s were produced, with an additional four in Győr and WNF factories in the second half of 1943. Between January and February 1943, 50 examples of a pressurized version, the G-3 were also produced; similar to the G-1 although it was equipped with the same FuG 16 VHF radio set as the G-4.
The following variants of the G-3 and G-4 were produced:
The G-6/U4 variant was armed with a 30 mm (1.18 in) MK 108 cannon mounted as a Motorkanone firing through the propeller hub instead of the 20 mm MG 151/20. The G-6 was very often seen during 1943 fitted with assembly sets, used to carry bombs or a drop tank, for use as a night fighter, or to increase firepower by adding rockets or extra gondola guns.
The following variants of the G-5 and G-6 were produced:
One offensive weapons upgrade in 1943 for the Bf 109G was one that mounted the Army`s Werfer-Granate 21 rocket weapon system with one launching tube under each wing panel. The rockets, fitted with a massive 40,8 kg (90 lbs) warhead, were aimed via the standard Revi reflector sight
s, and were spin-stabilized in flight. In emergency, the tubes could be jettisoned via a small explosive charge. Intended as a "stand-off" weapon, fired from a distance of 1,200 meters and outside the effective range of the formations defensive guns, it was employed against Allied bomber formations, the Wfr. Gr. 21 rocket was unofficially known as the BR 21 (Bordrakete 21 cm) for the Bf 109G-5, G-6 and G-14. The weapons system received the designation of Rüstsatz VII on the G-10.
The Bf 109 G-10, AS-engined G-5s, G-6s and G-14s as well as the K-4 saw a refinement of the engine cowlings. The blisters which had formerly covered the spent shell-casing chutes of the MG 131s became more streamlined and were lengthened and enlarged to cover both the weapons and the engine bearers. Initial prototype versions were symmetrical, but as larger superchargers were fitted, the engines required modified upper engine bearers to clear the supercharger housing, and as a result the final shape of the new cowling was asymmetrical, being enlarged on the port side where the supercharger was mounted on the DB engine. There were also special streamlined panels fitted to the forward fuselage. These so-called agglomerations could be seen in several different patterns. Because of their aerodynamically more efficient form in a side-view of DB 605AS and D -powered Bf 109 Gs and Ks, the agglomerations were barely discernible compared with the conspicuous fairings they replaced.
Flettner tabs
to decrease stick forces at high speeds. A radio-navigational method, the Y-Verführung (Y-Guidance) was introduced with the FuG 16ZY.
Subsequent Bf 109G versions were essentially modified versions of the basic G-6 airframe. Early in 1944, new engines with larger superchargers for improved high-altitude performance (DB 605AS), or with MW-50 water injection
for improved low/medium-altitude performance (DB 605AM), or these two features combined (DB 605ASM) were introduced into the Bf 109 G-6. Maximum speed of the G-5/G-6 was 530 km/h (320 mph) at sea level, 640 km/h (391 mph) at 6,600 m (21,650 ft)-rated altitude at 1.42 atm boost.
The G-14 arrived in July 1944 at the invasion front over France. It represented an attempt to create a standard type, incorporating many changes which had been introduced during production of the G-6, and which led to a plethora of variants, plaguing decentralized mass production. The standardization attempt proved to be a failure, but overall the type offered improved combat performance, as MW 50
power boosting water injection
(increasing output to 1,800 PS (1,775 hp, 1,324 kW), the clear-view Erla Haube was now standard installation. Top speed was 568 km/h (353 mph) at sea level, and 665 km/h (413 mph) at 5 km (16,400 ft) altitude. A high-altitude fighter, designated G-14/AS was also produced with the DB 605ASM high-altitude engine. The ASM engine was built with a larger capacity supercharger, and had a higher rated altitude, and correspondingly the top speed of the G-14/AS was 560 km/h (348 mph) at sea level, and 680 km/h (422 mph) at 7,5 km (24,600 ft) altitude.
There was increasing tendency to use plywood on some less vital parts e.g. on a taller tailfin/rudder unit, pilot seat or instrument panel. A caution estimate based on the available records suggest that about 5,500 G-14s and G-14/AS were built.
The following variants of the G-14 were produced:
Referred to as the "bastard aircraft of the Erla factory" in the Luftwaffes Aircraft Variants Book of December 1944, the G-10 was a Bf 109 G airframe combined with the new DB 605 D-2 engine, created to maintain production levels with minimal disruption of the assembly lines until production of K-series airframes would reach sufficient levels. Despite what the designation would suggest, it appeared in service after the G-14 in November 1944, largely replacing previous G-series aircraft on the production lines of Erla, WNF and Messerschmitt Regensburg factories. Evidence suggests that G-10s were rebuilt from older airframes, supplementing production of the new K-4s with aircraft of almost equal value in the cheapest possible manner. One apparent indication was two aircraft identification plates on the port forward fuselage, below the windscreen rather than one.
The most recognizable external change was the use of the "Erla-Haube" clear-view canopy. Internal changes included inheriting the new 2,000 W generator and the DB 605 D-2 engine of the 109K. Apart from the standardised streamlined engine cowlings, G-10s with the DB605 D-2 were equipped as standard with the MW-50 booster system (DB 605DM) and had a larger Fo 987 oil cooler housed in a deeper fairing. Also, because of the engine's enlarged crankcase and the oil return lines which ran in front of it, these G-10s had small blister fairings incorporated into the lower engine cowlings, forward of and below the exhaust stacks.
The following variants of the G-10 were produced:
Approximately 2,600 G-10s were produced from October 1944 until the war's end.
The Bf 109 G-12 was a two-seat trainer version of the Bf 109. This was a conversion of "war-weary" or rebuilt G-4 and G-6 airframes; the space needed for the second cockpit was gained by reducing the internal fuel capacity to only 240 L (60 US gal) meaning that the 300 L (80 US gal) drop tank was employed as standard equipment. This version was rarely armed with anything more than one or two cowling machine guns. The rear cockpit canopy was bowed out to give the instructor, who sat behind the student pilot in an armoured seat, a clearer view. The rear cockpit was also equipped with a basic instrument panel and all flight controls.
The Rüstsatz kits were designated by the letter "R" and a Roman numeral. Rüstsatz kits did not alter the aircraft's designation, so a Bf 109 G-6 with Rüstsatz II (50 kg/110 lb bombs) remained designated as 'Bf 109 G-6', and not 'G-6/R2' – the G-6/R2 was a reconnaissance fighter with MW 50, as suggested by most publications. The Umrüst-Bausatz, Umbau, or Rüstzustand were identified with either an "/R" or "/U" suffix and an Arabic number, e.g. Bf 109 G-10/U4.
Common Rüstsatz kits: Bf 109G:
Common Umrüst-Bausatz (Umbau) numbers:
The Bf 109H was intended to be a high-altitude fighter, developed from the F-series. The wingspan
was increased through the addition of new, constant-chord inner wing panels to 11.92 m (39.11 ft), and the widened stabilizer again received a supporting strut leading from the fuselage. Maximum speed was 750 km/h (470 mph) at 10,100 m (33,140 ft). A small number of Bf 109 H-1s were built, flying several sorties over Britain and France. Bf 109 H-2 and H-5 developments were also planned, but the entire H-series was scrapped because of wing flutter problems.
A record exists of one particular Bf 109H-1, Werknummer 110073, was recorded as having been converted to a photo-recon aircraft by a Luftwaffe long-range reconnaissance group, Fernaufklärungsgruppe 123, in May of 1944, and flown on dates immediately following the Invasion of Normandy
with one mission meant to scan the entire French coastline from Cherbourg to Ouistreham
, from an altitude of some 15 km (49,200 ft), which proved to be just beyond the achievable ceiling of the selected aircraft.
Externally the K series could be identified by changes in the locations of the radio equipment hatch,The shape of the hatch was changed in that the lower edge sloped up slightly to the front. which was moved forward and to a higher position between frames four and five, and the filler point for the fuselage fuel tank, which was moved forward to a location between frames two and three. In addition, the D/F loop was moved aft to sit between frames three and four on the top fuselage spine and a small circular plate above the footstep on the port side of the fuselage was deleted. The rudder was fitted as standard with a Flettner tab
and two fixed tabs although some rare examples were not fitted with the fixed tabs. All K-4s were to be fitted with a long retractable tailwheel (350 x 135 mm/14 x 5 in) with two small clamshell doors covering the recess when the tail-wheel was retracted.
The wings featured the large rectangular fairings for the large 660 x 190 mm (26 x 7 in) main wheels. Small wheel well doors, originally planned for the G series, were fitted to the outer ends of the wheel bays, covering the outer wheels when retracted. These doors were often removed by front-line units. The ailerons were fitted with small, adjustable trim tabs. The radio equipment was the FuG 16ZY
with an antenna mast fitted under the port outer wing and FuG 25a IFF as well as the FuG 125 Hermine D/F equipment. Internally, the oxygen bottles were relocated from the rear fuselage to the right wing. Flettner tabs
for the ailerons were also to be fitted to serial production aircraft to reduce control forces, but are only seen on photos of later production aircraft.
Armament of the K-4 consisted of a 30 mm (1.18 in) MK 108 engine-mounted cannon (Motorkanone) with 65 rounds, and two 13 mm (.51 in) MG 131s in the nose with 300 rpg although some K-4s were fitted with the MG 151/20 as the Motorkanone. Additional Rüstsätze, or equipment kits, such as a 300 L (80 US gal) drop tank (R III), bombs up to the size of 500 kg/1,100 lb (R I), underwing 20 mm Mauser MG 151/20 cannon gondola pods (R IV) or 21 cm (8 in) Wfr.Gr. 21 rockets (as on the Gustav models) could be carried after minimal preparations; the latter two however were rarely used by Bf 109 units at this stage of the war, but there is evidence that III./JG 26 were almost completely equipped with K-4s which were fitted with R IV. In addition there were problems with the 30 mm (1.18 in) MK 108 Motorkanone:
Power was provided by a Daimler-Benz DB 605DM (early models) of 1,800 PS output and later the DB 605DB/DC powerplant with 1,850/2,000 PS output. A wide-chord, three bladed VDM 9-12159 propeller of 3 m diameter was used, as on the G-6/AS, G-14/AS and G-10.
Deliveries began in mid-October 1944. 534 examples had been delivered by the Messerschmitt A.G., Regensburg by the end of November 1944, and 856 by the end of the year. Regensburg delivered a total of 1593 by the end of March 1945, after which production figures are missing. With such a high rate of production, despite continuous heavy fighting, by the end of January 1945 314 K-4s - about every fourth 109 - were listed on hand with the 1st line Luftwaffe units. Ultimately it was intended to equip all Bf 109 units with the 109K, which marked the final stage of 109 development before the jet age.
The Bf 109 K-4 was the fastest 109 of World War II, reaching 715 km/h (445 mph) at 7,500 m (24,610 ft) altitude; improved propellers were being developed when the war ended which would boost the speed to 727 km/h (452 mph), and 741 km/h (460 mph) was expected with a swept-back propeller design. Rate of climb was outstanding
4820 ft (1,469.1 m)/min at 1.98 atm
. The standard Revi 16C reflector sight
was fitted, which was to be replaced later by the EZ 42 Gyro gunsight
. With such improvements in performance, the Bf 109 remained comparable to opposing fighters until the end of the war. However, the deteriorating ability of the thousands of novice Luftwaffe pilots by this stage of the war meant the 109's strengths were of little value against the numerous and well-trained Allied fighter pilots.
Project drawings of the K-8 show an K-series airframe powered by the two-stage DB 605L high altitude engine, a high-velocity 30 mm (1.18 in) MK 103mot Motorkanone, and two 30 mm (1.18 in) MK 108 cannons in the wings; the cowl 13 mm (.51 in) MG 131s were dispensed with.
Some sources point to limited use of the K-14, intended as high-altitude heavy fighter. Two airframes are listed as delivered to II./JG52 under Major Wilhelm Batz in late spring of 1945, these being armed with only one 30 mm (1.18 in) cannon, but the type's existence cannot be positively confirmed. The K-14 was to be powered by the two-stage supercharged DB 605L engine, the use of a four-bladed propeller 460 mi/h, and an operational altitude of 38000 ft (11,582.4 m) was projected. Armour and armament were otherwise similar to the K-6.
Common Rüstsatz kits, Bf 109K
Known variants
radial engine
became available, a Bf 109F, Werknummer 5608, callsign D-ITXP was converted with a BMW 801 A-0. This aircraft became a prototype for the Bf 109X. The fuselage had a wider cross-section, and a new canopy was fitted. The wing tips were akin to that of the Bf 109E. The prototype was first flown by Flugkapitän Fritz Wendel
on 2 September 1940, and the test flights continued despite troubles with the BMW 801A powerplant. Development was stopped in early 1942.
This experimental aircraft was essentially two Bf 109F airframes (together with outer wing panels) joined together by means of a new wing, and new tail section, in a manner paralleled by the F-82 Twin Mustang
. In the preproduction model, the right fuselage cockpit was faired over and the pilot flew the aircraft from the left side fuselage. Four variants of this aircraft were proposed, one an interceptor armed with five 30 mm (1.18 in) cannons, and up to a 1,000 kg (2,200 lb) bomb load, the second a fighter bomber version, armed with two MK 108 cannons and up to two 2,200 lb. bombs. Both airframes were to be powered by the DB605 engine. A third and fourth were designed on paper and would be similar to the first two airframes but powered by Jumo 213 engines. Only one Bf 109Z was built, and it was never flown, having been damaged in an Allied bombing raid while in hangar and the project was permanently abandoned in 1944.
After the war, some Bf 109s were produced in Czechoslovakia
as the Avia S-99 and Avia S-199
. These were modified Bf 109G-14s, the latter with the inferior Junkers Jumo 211
F engine, which resulted in an aircraft with remarkably poor handling characteristics and a tendency to crash during landings. As noted above, Czech pilots who had previously flown Spitfires for the RAF nicknamed the aircraft Mezek ("Mule"). They were replaced in frontline service by Soviet jets in 1952, but flew on as trainers for another five years.
Several of the S-199s were sold to Israel
, forming the basis of the fledgeling Israeli Air Force
.
In Spain
, two versions of the Bf 109G-2, the Hispano Aviación HA-1112 "Tripala" and "Buchon", were built under license, the former with the Hispano-Suiza
engine, and the latter with the same Rolls-Royce Merlin
engines that had powered Spitfires. Many of these aircraft have been used for theatrical purposes, posing (rather unconvincingly, given their very distinctive undernose air intakes, mandated by the R-R Merlin engines they used) as "Emils" and "Gustavs" in Battle of Britain
and Tuskegee Airmen
, respectively. These modifications were carried out in the Hispano Aviación
factory in Seville
. Germany had agreed to let Spain have 25 un-assembled Bf 109G-2s to help familiarize the Spanish with the Messerschmitt plane. The wings and airframes arrived but not the engines, so the Spanish installed the French Hispano-Suiza engine, and then fitted Rolls-Royce Merlins as late as 1956. A few were still in active service until the late 1960s. The Ha 1112 was produced until 1958.
Messerschmitt Bf 109
The Messerschmitt Bf 109, often called Me 109, was a German World War II fighter aircraft designed by Willy Messerschmitt and Robert Lusser during the early to mid 1930s...
's versatility and time in service with both the Luftwaffe and other foreign air forces, numerous variants were produced over the eight years of service with the Luftwaffe
Luftwaffe
Luftwaffe is a generic German term for an air force. It is also the official name for two of the four historic German air forces, the Wehrmacht air arm founded in 1935 and disbanded in 1946; and the current Bundeswehr air arm founded in 1956....
and even more were produced by its foreign users.
Bf 109 A/B/C/D
The Bf 109A was the first version of the Bf 109. Armament was initially planned to be only two cowl-mounted 7.92 mm (.312 in) MG 17 machine gun
MG 17 machine gun
The MG 17 was a 7.92 mm machine gun produced by Rheinmetall-Borsig for use at fixed mountings in many World War II Luftwaffe aircraft.- History :...
s. However, possibly due to the introduction of the Hurricane and Spitfire, each with eight 7.7 mm (.303 in) machine guns, experiments were carried out with a third machine gun firing through the propeller shaft. V4 and some A-0 were powered by a 640 PS (631 hp, 471 kW) Junkers Jumo Jumo 210B
Junkers Jumo 210
The Jumo 210 was Junkers Motoren's first production inverted V12 gasoline aircraft engine, produced just before the start of World War II. Depending on version it produced between 610 and 700 PS and can be considered a counterpart of the Rolls-Royce Kestrel in many ways...
engine driving a two-blade fixed-pitch
Blade pitch
Blade pitch or simply pitch refers to turning the angle of attack of the blades of a propeller or helicopter rotor into or out of the wind to control the production or absorption of power. Wind turbines use this to adjust the rotation speed and the generated power...
propeller, but production was changed to the 670 PS (661 hp, 493 kW) Jumo 210D as soon as it became available. The A-0 were not of a uniform type but saw several changes in their appearance. Visible changes included engine, cockpit and machine gun ventilation holes/slats, and the location of the oil
Motor oil
Motor oil or engine oil is an oil used for lubrication of various internal combustion engines. The main function is to lubricate moving parts; it also cleans, inhibits corrosion, improves sealing, and cools the engine by carrying heat away from moving parts.Motor oils are derived from...
cooler was changed several times to prevent overheating. Many of these Bf 109 A-0 served with the Legion Condor
Condor Legion
The Condor Legion was a unit composed of volunteers from the German Air Force and from the German Army which served with the Nationalists during the Spanish Civil War of July 1936 to March 1939. The Condor Legion developed methods of terror bombing which were used widely in the Second World War...
and were often misidentified as B-series aircraft, and probably served in Spain with the tactical markings 6-1 to 6-16. One A-0, marked as 6-15, ran out of fuel and was forced to land behind enemy lines. It was captured by Republican
Second Spanish Republic
The Second Spanish Republic was the government of Spain between April 14 1931, and its destruction by a military rebellion, led by General Francisco Franco....
troops on 11 November 1937 and later transferred to the Soviet Union for a closer inspection. 6-15 incorporated several improvements from the Bf 109B production program and had been prepared to use a variable-pitch propeller
Controllable pitch propeller
A controllable pitch propeller or variable pitch propeller is a type of propeller with blades that can be rotated around their long axis to change their pitch...
although it had not been installed.
According to RLM documentation 22 aircraft were ordered and delivered with V4 as the A-series prototype.
The first Bf 109 in serial production, the Bf 109B , was fitted with the 670 PS (661 hp, 493 kW) Jumo 210D engine driving a two-bladed fixed-pitch propeller. During the B-1 production run a variable pitch propeller was introduced and often retrofitted to older aircraft; these were then unofficially known as B-2s. Both versions saw combat with the Legion Condor during the Spanish Civil War
Spanish Civil War
The Spanish Civil WarAlso known as The Crusade among Nationalists, the Fourth Carlist War among Carlists, and The Rebellion or Uprising among Republicans. was a major conflict fought in Spain from 17 July 1936 to 1 April 1939...
, although it was apparent that the armament was still inadequate. Several aircraft were produced with an engine-mounted machine gun but it was very unreliable, most likely because of engine vibrations and overheating. Thus the Bf 109 V8 was constructed to test the fitting of two more machine guns in the wings; however, results showed that the wing needed strengthening. In the following V9 prototype both wing guns were replaced by 20 mm MG FF cannons.
A total of 341 Bf 109B of all versions were built by Messerschmitt, Fieseler
Fieseler
The Gerhard Fieseler Werke was a German aircraft manufacturer of the 1930s and 40s. The company is remembered mostly for its military aircraft built for the Luftwaffe during the Second World War.-History:...
, and Erla.
The short-lived Bf 109C was powered by a 700 PS (690 hp, 515 kW) Jumo 210G engine with direct fuel injection. Another important change was a strengthened wing, now carrying two more machine guns giving four 7.92 mm (.312 in) MG 17s in total. The C-0 were pre-production aircraft, the C-1 was the production version, and the C-2 was an experimental version with an engine-mounted machine gun. The C-3 was planned with 20 mm MG FF cannon
MG FF cannon
The MG FF was a drum-fed, 20 mm aircraft autocannon, developed in 1936 by Ikaria Werke Berlin of Germany. It was a derivative of the Swiss Oerlikon FF F cannon, itself a development of the German World War I Becker 20 mm cannon, and was designed to be used in fixed or flexible mountings, as...
s replacing the two MG 17s in the wings, but it is not known how many C-3 (if any) were built or converted. The C-4 was planned to have an engine-mounted Motorkanone MG FF, but the variant was not produced.
A total of 58 Bf 109C of all versions were built by Messerschmitt.
The next model, the V10 prototype, was identical to the V8, except for its Jumo 210G engine. The V10, V11, V12 and V13 prototypes were built using Bf 109B airframes, and tested the DB600A engine with the hope of increasing the performance of the aircraft. The DB600A was dropped as the improved DB601A
Daimler-Benz DB 601
|-See also:-Bibliography:* Mankau, Heinz and Peter Petrick. Messerschmitt Bf 110, Me 210, Me 410. Raumfahrt, Germany: Aviatic Verlag, 2001. ISBN 3-92550-562-8.* Neil Gregor Daimler-Benz in the Third Reich. Yale University Press, 1998-External links:...
with direct fuel injection was soon to become available.
Invasion of Poland (1939)
The Invasion of Poland, also known as the September Campaign or 1939 Defensive War in Poland and the Poland Campaign in Germany, was an invasion of Poland by Germany, the Soviet Union, and a small Slovak contingent that marked the start of World War II in Europe...
were rapidly taken out of service and replaced by the Bf 109E, except in some night fighter
Night fighter
A night fighter is a fighter aircraft adapted for use at night or in other times of bad visibility...
units where some examples were used into early-1940. Variants included D-0 and D-1 models, both having a Junkers Jumo 210D engine and armed with two wing-mounted and two nose-mounted 7.92 mm (.312 in) MG 17s.> The D-2 was an experimental version with an engine-mounted machine gun, but as previously tried, this installation failed. The D-3 was similar to the C-3 but with two 20 mm MG FFs in the wings.
A total of 647 Bf 109D of all versions were built by Focke-Wulf, Erla, Fieseler, Arado and AGO. Messerschmitt is listed as having produced only four Bf 109D, probably the D-0 preproduction series with the serial production transferred to licensed manufacturers. Several Bf 109D were sold to Hungary and Switzerland.
Bf 109E "Emil"
In late 1938, the "Emil" entered production. To improve on the performance afforded by the rather small 447-522 kW (600-700 hp) Jumo, the larger Daimler-Benz DB 601Daimler-Benz DB 601
|-See also:-Bibliography:* Mankau, Heinz and Peter Petrick. Messerschmitt Bf 110, Me 210, Me 410. Raumfahrt, Germany: Aviatic Verlag, 2001. ISBN 3-92550-562-8.* Neil Gregor Daimler-Benz in the Third Reich. Yale University Press, 1998-External links:...
A engine was used, yielding an extra 223 kW (300 hp) at the cost of an additional 181 kg (400 lb). To test the new 1,100 PS (1,085 hp, 809 kW) DB601A
Daimler-Benz DB 601
|-See also:-Bibliography:* Mankau, Heinz and Peter Petrick. Messerschmitt Bf 110, Me 210, Me 410. Raumfahrt, Germany: Aviatic Verlag, 2001. ISBN 3-92550-562-8.* Neil Gregor Daimler-Benz in the Third Reich. Yale University Press, 1998-External links:...
engine, two more prototypes (V14 and V15) were built, each differing in their armament. While the V14 was armed with two 7.92 mm (.312 in) MG 17s above the engine and one 20 mm MG FF in each wing, the V15 was fitted with the two MG 17s mounted above the engine only. After test fights the V14 was considered more promising and a pre-production batch of 10 E-0 was ordered. Batches of both E-1 and E-3 variants were shipped to Spain for evaluation, and received their baptism of fire in the final phases of the Spanish Civil War.
E-1
The production version E-1 kept two 7.92 mm (.312 in) MG 17s above the engine and two more in the wings. Later, many were modified to the E-3 armament standard. The E-1B was a small batch of E-1s becoming the first operational Bf 109 fighter bomber, or Jagdbomber (usually abbreviated to Jabo). These were fitted with either an ETC 250 bomb rack, carrying one 250 kg (550 lb) bomb, or two ETC 50 bomb racks, each carrying a 50 kg (110 lb) bomb under both wings. The E-1 was also fitted with the Reflexvisier "Revi" gunsight. Communications equipment was the FuG 7 Funkgerät 7 (radio set) short-range radio apparatus, effective to ranges of 48–56 km (30–35 mi). A total of 1,183 E-1 were built, 110 of them were E-1/B.E-2
Only very limited numbers of the E-2 variant were built, for which the V20 prototype served as basis. It was armed with two wing mounted, and one engine mounted MG FF cannon, which gave considerable trouble in service, as well as two MG 17s cowl machineguns. In August 1940, II./JG 27 was operating this type.E-3
To improve the performance of the Bf 109E, the last two real prototypes, V16 and V17 were constructed. These received some structural improvements and more powerful armament. Both were the basis of the Bf 109 E-3 version. The E-3 was armed with the two MG 17s above the engine and one MG FF cannon in each wing. A total of 1,276 E-3 were built, including 83 E-3a export versions.E-4
The E-3 was replaced by the E-4 (with many airframes being upgraded to E-4 standards starting at the beginning of the Battle of BritainBattle of Britain
The Battle of Britain is the name given to the World War II air campaign waged by the German Air Force against the United Kingdom during the summer and autumn of 1940...
) which was different in some small details, most notably by using the modified 20 mm MG-FF/M wing cannon and having improved head armor for the pilot. With the MG FF/M it was possible to fire a new and improved type of explosive shell, called Minengeschoß (or 'mine-shell') which was made using drawn steel (the same way brass cartridges
Cartridge (firearms)
A cartridge, also called a round, packages the bullet, gunpowder and primer into a single metallic case precisely made to fit the firing chamber of a firearm. The primer is a small charge of impact-sensitive chemical that may be located at the center of the case head or at its rim . Electrically...
are made) instead of being cast as was the usual practice. This resulted in a shell with a thin but strong wall, which had a larger cavity in which to pack a much larger explosive charge than was otherwise possible. The new shell required modifications to the MG FF's mechanism due to the different recoil characteristics, hence the MG FF/M designation.
The cockpit canopy was also revised to an easier-to-produce, "squared-off" design, which also helped improve the pilot's field of view. This canopy, which was also retrofitted to many E-1s and E-3s, was largely unchanged until the introduction of a welded, heavy-framed canopy on the G series in the autumn of 1942. The E-4 would be the basis for all further Bf 109E developments. Some E-4 and later models received a further improved 1,175 PS (1,159 hp, 864 kW) DB601N
Daimler-Benz DB 601
|-See also:-Bibliography:* Mankau, Heinz and Peter Petrick. Messerschmitt Bf 110, Me 210, Me 410. Raumfahrt, Germany: Aviatic Verlag, 2001. ISBN 3-92550-562-8.* Neil Gregor Daimler-Benz in the Third Reich. Yale University Press, 1998-External links:...
high-altitude engine; known as the E-4/N this first appeared in July 1940. The E-4 was also available as a fighter-bomber with equipment very similar to the previous E-1/B. It was known as E-4/B (DB 601Aa engine) and E-4/BN (DB 601N engine). A total of 561 of all E-4 versions were built, including 250 E-4, 20 E-4/N, 211 E-4/B and 15 E-4/BN.
E-5, E-6
The E-5 and E-6 were both reconnaissance variants with a camera installation behind the cockpit. The E-5 was a reconnaissance variant of the E-3, the E-6 was a reconnaissance variant of the E-4/N. Twenty-nine E-5s were built and nine E-6 were ordered.E-7
The E-7 was the next major production variant, entering service and seeing combat at the end of August 1940. One of the limitations of the earlier Bf 109E was their short range of 660 km (410 mi) and limited endurance, as the design was originally conceived as a short-range interceptor. The E-7 rectified this problem as it was the first subtype to be able to carry a drop tankDrop tank
In aeronautics, a drop tank is used to describe auxiliary fuel tanks externally carried by aircraft. A drop tank is expendable and often jettisonable...
, usually a 300 L (80 US gal) capacity unit mounted on a rack under the fuselage, which increased their range to 1,325 km (820 mi). Alternatively, a bomb could be fitted and the E-7 could be used as a Jabo fighter-bomber. Previous Emil subtypes were progressively retrofitted with the necessary fittings for carrying a drop tank from October 1940. Early E-7s were fitted with the 1,100 PS DB 601A or 1,175 PS DB 601Aa engine, while late-production ones received 1,175 PS DB 601N engines with improved altitude performance – the latter was designated as E-7/N. A total of 438 E-7s of all variants were built.
Bf 109E variants and sub-variants
- E-0 (Pre-production aircraft with 4 × 7.92 mm/.312 in MG 17 machine guns)
- E-1 (Similar to E-0)
- E-1/B (Fighter-bomber version of E-1, usually with DB 601Aa)
- E-2 (Limited production, additional engine mounted MG FF cannon, otherwise as E-3)
- E-3 (Similar to E-1 but 2 × 20 mm MG FFs in the wings instead of the MG 17)
- E-4 (Armor and structural improvements, change of MG FF cannons to MG FF/M. "Square" canopy)
- E-4/B (Fighter-bomber version of E-4, 1 × 250 kg/550 lb bomb, usually with DB 601Aa)
- E-4 trop (Version of E-4 modified to serve in tropical regions)
- E-4/N (E-4 with DB601N engine)
- E-4/BN (Fighter-bomber version of E-4/N, 1 × 250 kg/550 lb bomb)
- E-5 (Recon version of E-3, camera equipment, 2 × 7.92 mm/.312 in MG 17)
- E-6 (Recon version of E-4/N, camera equipment, 2 × 7.92 mm/.312 in MG 17)
- E-7 (Similar to E-4 but with optional 300 L drop tank)
- E-7/N (Similar to E-4/N but with optional 300 L tank)
- E-7/NZ (also known as E-7/Z, an E-7/N with additional GM-1GM-1GM-1 , colloquially known as Haha-Gerät was a system for injecting nitrous oxide into aircraft engines that was used by the Luftwaffe in World War II. This increased the amount of oxygen in the fuel mixture, and thereby improve high-altitude performance...
nitrous oxide injection system) - E-7/U2 (Ground attack variant of E-7 with additional armor)
- E-8 (Long-range version of E-1 using drop tank installation of E-7, 4 × 7.92 mm/.312 in MG 17)
- E-9 (Recon version of E-7/N, drop tank, camera equipment, 2 × 7.92 mm/.312 in MG 17)
Bf 109T "Trägerflugzeug" (carrier aircraft)
German Navy
The German Navy is the navy of Germany and is part of the unified Bundeswehr .The German Navy traces its roots back to the Imperial Fleet of the revolutionary era of 1848 – 52 and more directly to the Prussian Navy, which later evolved into the Northern German Federal Navy...
had become fascinated with the idea of the aircraft carrier
Aircraft carrier
An aircraft carrier is a warship designed with a primary mission of deploying and recovering aircraft, acting as a seagoing airbase. Aircraft carriers thus allow a naval force to project air power worldwide without having to depend on local bases for staging aircraft operations...
. Borrowing ideas from the British
United Kingdom
The United Kingdom of Great Britain and Northern IrelandIn the United Kingdom and Dependencies, other languages have been officially recognised as legitimate autochthonous languages under the European Charter for Regional or Minority Languages...
and Japan
Japan
Japan is an island nation in East Asia. Located in the Pacific Ocean, it lies to the east of the Sea of Japan, China, North Korea, South Korea and Russia, stretching from the Sea of Okhotsk in the north to the East China Sea and Taiwan in the south...
ese (mainly ), they started the construction of as part of the rebuilding of the navy. The air group for the carrier was settled on Messerschmitt Bf 109T fighters and Ju 87C
Junkers Ju 87
The Junkers Ju 87 or Stuka was a two-man German ground-attack aircraft...
dive bombers. The suffix 'T' denotes carrier, 'Träger', in German use.
Despite references to a Bf 109 T-0 version. this version never existed. Seven earlier versions (Bf 109 B, Bf 109 C, Bf 109 E) were converted to test carrier equipment. This included, adding a tail-hook, catapult fittings and increasing the wingspan to 11.08 m (36.35 ft). The ailerons were increased in span, as were the slats, and flap travel was increased. The wings were not modified to be folding since the ship Graf Zeppelin was designed around the intended aircraft, so the lifts could accommodate the Bf 109T with its 11 m (36 ft) wingspan. The wings could, however, be detached from the fuselage for transport purposes, as in every version of the Bf 109.
Following flight tests, especially the catapult tests, 70 T-1 with DB601Ns were to be produced at Fieseler
Fieseler
The Gerhard Fieseler Werke was a German aircraft manufacturer of the 1930s and 40s. The company is remembered mostly for its military aircraft built for the Luftwaffe during the Second World War.-History:...
in Kassel, but after seven T-1s were built, the carrier project was canceled. The remaining 63 of 70 T-1s were built as T-2s without carrier equipment and some of the T-1s may have been "upgraded" to T-2 standard. It was found that the performance of the T-2 was closely comparable to the E-4/N and, because of its ability to take off and land in shorter distances, these fighters were assigned to I/JG.77
Jagdgeschwader 77
Jagdgeschwader 77 Herz As was a Luftwaffe fighter Geschwader during World War II. It served in all the German theaters of war, from Western Europe to the Eastern Front, and from the high north in Norway to the Mediterranean.All three gruppen within the Geschwader operated variants of the...
, deployed in Norway on landing strips which were both short and subject to frequent, powerful cross-winds. At the end of 1941 the unit was ordered to return their aircraft to Germany and received E-3s as replacements. The armament of the Bf 109T consisted of two 7.92 mm (.312 in) MG 17s above the engine and one 20 mm MG FF/M cannon in each wing.
Interest in Graf Zeppelin revived when the value of aircraft carriers became obvious, and in 1942 the ship was back in the yards for completion. By this time the Bf 109T was hopelessly outdated and a new fighter would be needed. Messerschmitt responded with the updated Me 155A series, but work on the ship was again canceled and the Me 155 was later re-purposed as a high-altitude interceptor. Design work was transferred to Blohm & Voss and the aircraft was then known as the BV 155.
The Bf 109Ts were issued to several training units in 1943. Then, in April 1943 the Jagdstaffel Helgoland was formed and operated from Düne until late 1943 when the unit transferred to Lister in south Norway. The unit was re-named as 11./JG 11 as of 30 November 1943 and the Bf 109Ts remained in operations until the summer of 1944, after which some were used in training units in Germany.
Prototypes
Development of the new Bf 109F airframe had begun in 1939. After February 1940 an improved engine, the Daimler-Benz DB 601EDaimler-Benz DB 601
|-See also:-Bibliography:* Mankau, Heinz and Peter Petrick. Messerschmitt Bf 110, Me 210, Me 410. Raumfahrt, Germany: Aviatic Verlag, 2001. ISBN 3-92550-562-8.* Neil Gregor Daimler-Benz in the Third Reich. Yale University Press, 1998-External links:...
, was developed for use with the Bf 109. The engineers at the Messerschmitt facilities took two Bf 109 E-1 airframes and installed this new powerplant. The first two prototypes, V21 (Werksnummer (Works number) or W.Nr 5602) and V22 (W.Nr 1800) kept the trapeziform
Trapezoid
In Euclidean geometry, a convex quadrilateral with one pair of parallel sides is referred to as a trapezoid in American English and as a trapezium in English outside North America. A trapezoid with vertices ABCD is denoted...
wing shape from the E-1, but the span was reduced by 61 cm (2 ft) by "clipping" the tips. Otherwise the wings incorporated the cooling system modifications described below. V22 also became the testbed for the pre-production DB 601E. The smaller wings had a detrimental effect on the handling so V23, Stammkennzeichen (factory CodeThese factory codes were used by all second line aircraft such as trainers, communication, some Air Service aircraft and others not engaged in operational use.Stammkennzeichen) CE+BP, W.Nr 5603, was fitted with new, semi-elliptical wing
Elliptical wing
An elliptical wing is a wing planform shape that minimizes induced drag. Elliptical taper shortens the chord near the wingtips in such a way that all parts of the wing experience equivalent downwash, and lift at the wing tips is essentially zero, improving aerodynamic efficiency due to a greater...
tips. The fourth prototype, V24 VK+AB, W.Nr 5604, flew with the clipped wings but featured a modified, "elbow"-shaped supercharger
Supercharger
A supercharger is an air compressor used for forced induction of an internal combustion engine.The greater mass flow-rate provides more oxygen to support combustion than would be available in a naturally aspirated engine, which allows more fuel to be burned and more work to be done per cycle,...
air-intake which was eventually adopted for production, and a deeper oil cooler bath beneath the cowling. On all of these prototypes the fuselage was cleaned up and the engine cowling modified to improve aerodynamics.
Aerodynamic improvements
Compared to the earlier Bf 109E, the Bf 109F was much improved aerodynamically. The engine cowling was redesigned to be smoother and more rounded. The enlarged propeller spinner, adapted from that of the new Messerschmitt Me 210Messerschmitt Me 210
The Messerschmitt Me 210 was a German heavy fighter and ground-attack aircraft of World War II. The Me 210 was designed to replace the Bf 110 in heavy fighter role; design started before the opening of World War II. The first examples of the Me 210 were ready in 1939, but they proved to have poor...
, now blended smoothly into the new engine cowling. Underneath the cowling was a revised, more streamlined oil cooler radiator and fairing. A new ejector exhaust arrangement was incorporated, and on later aircraft a metal shield was fitted over the left hand banks to deflect exhaust fumes away from the supercharger air-intake. The supercharger air-intake was, from the F-1 -series onwards, a rounded, "elbow"-shaped design that protruded further out into the airstream. A new three-blade, light-alloy VDM propeller unit with a reduced diameter of 3 m (9 ft 8.5 in) was used. Propeller pitch was changed electrically, and was regulated by a constant-speed unit, though a manual override was still provided. Thanks to the improved aerodynamics, more fuel-efficient engines and the introduction of light-alloy drop tanks, the Bf 109F offered a much increased maximum range of 1,700 km (1,060 mi) compared to the Bf 109E's maximum range of 660 km (410 mi).
The canopy stayed essentially the same as that of the E-4 although the handbook for the 'F' stipulated that the forward, lower triangular panel to starboard was to be replaced by a metal panel with a port for firing signal flares. Many F-1s and F-2s kept this section glazed. A two-piece, all-metal armour plate head shield was added, as on the E-4, to the hinged portion of the canopy, although some lacked the curved top section. A bullet-resistant windscreen could be fitted as an option. The fuel tank was self-sealing, and around 1942 Bf 109Fs were retrofitted with additional armour made from layered light-alloy plate just aft of the pilot and fuel tank. The fuselage aft of the canopy remained essentially unchanged in its externals.
The tail section of the aircraft was redesigned as well. The rudder was slightly reduced in area and the symmetrical fin section changed to an airfoil
Airfoil
An airfoil or aerofoil is the shape of a wing or blade or sail as seen in cross-section....
shape, producing a sideways lift force that swung the tail slightly to the left. This helped increase the effectiveness of the rudder, and reduced the need for application of right rudder on takeoff to counteract torque effects from the engine and propeller. The conspicuous bracing struts were removed from the horizontal tailplane
Tailplane
A tailplane, also known as horizontal stabilizer , is a small lifting surface located on the tail behind the main lifting surfaces of a fixed-wing aircraft as well as other non-fixed wing aircraft such as helicopters and gyroplanes...
s which were relocated to slightly below and forward of their original positions. A semi-retractable tailwheel was fitted and the main undercarriage legs were raked forward by six degrees to improve the ground handling. An unexpected structural flaw of the wing and tail section was revealed as the first Bf 109Fs were rushed into service; some aircraft crashed or nearly crashed, with either the wing surface wrinkling or fracturing, or by the tail structure failing. In one such accident, the commander of JG 2 "Richthofen", Wilhelm Balthasar
Wilhelm Balthasar
Major Wilhelm Balthasar was a German World War II Luftwaffe flying ace, commander of Jagdgeschwader 2 and a winner of the Knight's Cross of the Iron Cross with Oak Leaves . The Knight's Cross of the Iron Cross and its higher grade Oak Leaves was awarded to recognise extreme battlefield bravery...
lost his life when he was attacked by a Spitfire during a test flight. While making an evasive manoeuvre, the wings broke away and Balthasar was killed when his aircraft hit the ground. Slightly thicker wing skins and reinforced spars dealt with the wing problems. Tests were also carried out to find out why the tails had failed, and it was found that at certain engine settings a high-frequency oscillation
Vibration
Vibration refers to mechanical oscillations about an equilibrium point. The oscillations may be periodic such as the motion of a pendulum or random such as the movement of a tire on a gravel road.Vibration is occasionally "desirable"...
in the tailplane spar was overlapped by harmonic
Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc. The harmonics have the property that they are all periodic at the fundamental...
vibrations from the engine; the combined effect being enough to cause structural failure at the rear fuselage/fin attachment point. Initially two external stiffening plates were screwed onto the outer fuselage on each side, and later the entire structure was reinforced.
The entire wing was redesigned, the most obvious change being the new quasi-elliptical wingtips, and the slight reduction of the aerodynamic area to 16.05 m² (172.76 ft²). Other features of the redesigned wings included new leading edge slats
Leading edge slats
Slats are aerodynamic surfaces on the leading edge of the wings of fixed-wing aircraft which, when deployed, allow the wing to operate at a higher angle of attack. A higher coefficient of lift is produced as a result of angle of attack and speed, so by deploying slats an aircraft can fly at slower...
, which were slightly shorter but had a slightly increased chord
Chord (aircraft)
In aeronautics, chord refers to the imaginary straight line joining the trailing edge and the center of curvature of the leading edge of the cross-section of an airfoil...
; and new rounded, removable wingtips which changed the planview of the wings and increased the span slightly over that of the E-series. Frise-type ailerons replaced the plain ailerons of the previous models. The 2R1 profile was used with a thickness-to-chord ratio of 14.2% at the root reducing to 11.35% at the last rib. As before, dihedral was 6° 32'.
The wing radiators were shallower and set farther back on the wing. A new cooling system was introduced which was automatically regulated by a thermostat with interconnected variable position inlet and outlet flaps that would balance the lowest drag possible with the most efficient cooling. A new radiator, shallower but wider than that fitted to the E was developed. A boundary layer
Boundary layer
In physics and fluid mechanics, a boundary layer is that layer of fluid in the immediate vicinity of a bounding surface where effects of viscosity of the fluid are considered in detail. In the Earth's atmosphere, the planetary boundary layer is the air layer near the ground affected by diurnal...
duct allowed continual airflow to pass through the airfoil above the radiator ducting and exit from the trailing edge of the upper split flap. The lower split flap was mechanically linked to the central "main" flap, while the upper split flap and forward bath lip position were regulated via a thermostatic valve which automatically positioned the flaps for maximum cooling effectiveness. In 1941 "cutoff" valves were introduced which allowed the pilot to shut down either wing radiator in the event of one being damaged; this allowed the remaining coolant to be preserved and the damaged aircraft returned to base. However, these valves were delivered to frontline units as kits, the number of which, for unknown reasons, was limited. These cutoff valves were later factory standard fitting for Bf 109G and K series.
Armament
The armament of the Bf 109F was revised and now consisted of the two synchronized 7.92 mm (.312 in) MG 17s with 500 rpg above the engine plus a Motorkanone cannon firing through the propeller hub. The pilot's opinion on the new armament was mixed: Oberst Adolf GallandAdolf Galland
Adolf "Dolfo" Joseph Ferdinand Galland was a German Luftwaffe General and flying ace who served throughout World War II in Europe. He flew 705 combat missions, and fought on the Western and the Defence of the Reich fronts...
criticised the light armament as inadequate for the average pilot, while Major Walter Oesau
Walter Oesau
Walter "Gulle" Oesau was a German World War II fighter ace who served in the Luftwaffe from 1934 until his death in 1944...
preferred to fly a Bf 109E, and Oberst Werner Mölders
Werner Mölders
Werner Mölders was a World War II German Luftwaffe pilot and the leading German fighter ace in the Spanish Civil War. Mölders became the first pilot in aviation history to claim 100 aerial victories—that is, 100 aerial combat encounters resulting in the destruction of the enemy aircraft, and was...
saw the single centreline gun as an improvement.
With the early tail unit problems out of the way, pilots generally agreed that the F series was the best-handling of all the Bf 109 series. Mölders flew one of the first operational Bf 109F-1s over England from early October 1940; he may well have been credited with shooting down eight Hurricanes and four Spitfires while flying W.No 5628, Stammkennzeichen SG+GW between 11 October and 29 October 1940.
F-0, F-1, F-2
As the DB601E was not yet available in numbers, the pre-production F-0 (the only F variant to have a rectangular supercharger intake) and the first production series F-1/F-2 received the 1,175 PS (1,159 hp, 864 kW) DB 601N engine driving a VDM 9-11207 propeller. The F-0/F-1 and F-2 only differed in their armament; the F-1 being fitted with one 20 mm MG FF/M Motorkanone firing through the engine hub, with 60 rounds. The F-1 first saw action in the Battle of BritainBattle of Britain
The Battle of Britain is the name given to the World War II air campaign waged by the German Air Force against the United Kingdom during the summer and autumn of 1940...
in October 1940 with JG 51. The most experienced fighter aces like Werner Mölders
Werner Mölders
Werner Mölders was a World War II German Luftwaffe pilot and the leading German fighter ace in the Spanish Civil War. Mölders became the first pilot in aviation history to claim 100 aerial victories—that is, 100 aerial combat encounters resulting in the destruction of the enemy aircraft, and was...
were the first ones to fly the first Bf 109 F-1s in combat in October 1940. A total of 208 F-1s were built between August 1940 and February 1941 by Messerschmitt Regensburg and the Wiener Neustädter Flugzeugwerke.
The F-2 introduced the 15 mm Mauser MG 151 cannon
MG 151 cannon
The MG 151 was a 15 mm autocannon produced by Waffenfabrik Mauser starting in 1940. It was in 1941 developed into the 20 mm MG 151/20 cannon which was widely used on many types of German Luftwaffe fighters, fighter bombers, night fighters, ground attack and even bombers as part of or as...
with 200 rounds. The Motorkanone was supplemented by two synchronized 7.92 mm (.312 in) MG 17 machine guns mounted under the engine cowl, with 500 rpg. As the harder-hitting 20 mm version of the same gun become available, a number of F-2s were retrofitted with it in the field. About 1,380 F-2s were built between October 1940 and August 1941 by AGO, Arado, Erla, Messerschmitt Regensburg and WNF. No tropicalized version was built, although individual F-2s were retrofitted with sand filters in the field. The maximum speed of the F-1 and F-2 was 615 km/h (382 mph) at rated altitude.
- F-0 (Pre-production aircraft built from E series airframes, Adolf Galland was one of the few to fly one operationally)
- F-1 (Armed with 1 × 20 mm MG FF/M Motorkanone cannon and 2 × 7.92 mm/.312 in MG 17 machine guns)
- F-2 (Armed with 1 × 15 mm (.59 in) MG 151 cannonMG 151 cannonThe MG 151 was a 15 mm autocannon produced by Waffenfabrik Mauser starting in 1940. It was in 1941 developed into the 20 mm MG 151/20 cannon which was widely used on many types of German Luftwaffe fighters, fighter bombers, night fighters, ground attack and even bombers as part of or as...
and 2 × 7.92 mm/.312 in MG 17)- F-2 trop (tropicalized version, only as field conversion)
F-3, F-4, F-5, F-6
Only 15 examples of the F-3 are believed to have been produced by Messerschmitt Regesnburg between October 1940 and January 1941. Like the F-1, the F-3 was armed with the 20 mm MG-FF/M and two 7.92 mm (.312 in) MG 17s.
From the F-4 onward, the new 20 mm Mauser MG 151/20 with 200 rounds was used as the motorkanone. The first F-4s reached frontline units in June 1941. Production lasted exactly a year between May 1941 and May 1942, with 1,841 of all F-4 variants produced. Some of the later models were capable of mounting two 20 mm MG 151/20 cannons under the wing in faired gondolas with 135 rpg. These were designated F-4/R1 and 240 of them were produced by W.N.F. in the first quarter of 1942. This optional additional armament was standardized as field kit for later G and K series. A special high-altitude variant, the F-4/Z featuring GM-1
GM-1
GM-1 , colloquially known as Haha-Gerät was a system for injecting nitrous oxide into aircraft engines that was used by the Luftwaffe in World War II. This increased the amount of oxygen in the fuel mixture, and thereby improve high-altitude performance...
boost, was also built with a production run of 544 in the first quarter of 1942 and saw extensive use. Finally, the Erla factory produced 576 tropicalized F-4 trop in the first half of 1942.
With its initial engine rating of 1,200 PS, the maximum speed of the F-4 (and F-3) was 635 km/h (394 mph) at rated altitude; and with the clearance of the full rating of 1,350 PS, maximum speed increased to 670 km/h (420 mph).
- F-3 (As F-1 but with 1350 PS DB 601E engine, produced in limited numbers)
- F-4 (As F-2 but with DB 601E engine, 20 mm MG 151/20 "Motorkanone" cannon replacing the 15 mm MG 151)
- F-4/R1 (As F-4, but capable of mounting two 20 mm MG 151/20 cannons in underwing gondolas)
- F-4/Z (As F-4, high-altitude fighter with GM-1 boost)
- F-5 (Recon version of F-4, only two 7.92 mm/.312 in MG 17)
- F-6 (Recon version of F-4, improved camera equipment)
Bf 109G "Gustav"
Introduction
The Bf 109 G-series was developed from the largely identical F-series airframe, although there were detail differences. Modifications included a reinforced wing structure, an internal bullet-proof windscreen, the use of heavier, welded framing for the cockpit transparencies, and additional light-alloy armour for the fuel tank. It was originally intended that the wheel wells would incorporate small doors to cover the outer portion of the wheels when retracted. To incorporate these the outer wheel bays were squared off. Two small inlet scoops for additional cooling of the spark plugs were added on both sides of the forward engine cowlings. A less obvious difference was the omission of the boundary layerBoundary layer
In physics and fluid mechanics, a boundary layer is that layer of fluid in the immediate vicinity of a bounding surface where effects of viscosity of the fluid are considered in detail. In the Earth's atmosphere, the planetary boundary layer is the air layer near the ground affected by diurnal...
bypass outlets, which had been a feature of the F-series, on the upper radiator flaps.
Like most German aircraft produced in World War II, the Bf 109 G-series was designed to adapt to different operational tasks with greater versatility; larger modifications to fulfil a specific mission task like long-range recon or long-range fighter-bomber were with "Rüststand" and given a "/R" suffix, smaller modifications on the production line or during overhaul like equipment changes were made with kits of pre-packaged parts known as Umrüst-Bausätze, usually contracted to Umbau and given a "/U" suffix. Field kits known as Rüstsätze were also available but those did not change the aircraft designation. Special high-altitude interceptors with GM-1
GM-1
GM-1 , colloquially known as Haha-Gerät was a system for injecting nitrous oxide into aircraft engines that was used by the Luftwaffe in World War II. This increased the amount of oxygen in the fuel mixture, and thereby improve high-altitude performance...
nitrous oxide injection high-altitude boost and pressurized
Cabin pressurization
Cabin pressurization is the pumping of compressed air into an aircraft cabin to maintain a safe and comfortable environment for crew and passengers when flying at altitude.-Need for cabin pressurization:...
cockpits were also produced.
The newly fitted Daimler-Benz DB 605
Daimler-Benz DB 605
|-See also:-Bibliography:* Gunston, Bill. World Encyclopedia of Aero Engines. Cambridge, England. Patrick Stephens Limited, 1989. ISBN 1-85260-163-9* Jane's Fighting Aircraft of World War II. London. Studio Editions Ltd, 1989. ISBN 0-517-67964-7...
A engine was a development of the DB 601E engine utilised by the preceding Bf 109F-4; displacement
Engine displacement
Engine displacement is the volume swept by all the pistons inside the cylinders of an internal combustion engine in a single movement from top dead centre to bottom dead centre . It is commonly specified in cubic centimeters , litres , or cubic inches...
and compression ratio
Compression ratio
The 'compression ratio' of an internal-combustion engine or external combustion engine is a value that represents the ratio of the volume of its combustion chamber from its largest capacity to its smallest capacity...
were increased as well as other detail improvements. Takeoff and emergency power of 1,475 PS (1,455 hp, 1,085 kW) was achieved with 1.42 atm
Atmosphere (unit)
The standard atmosphere is an international reference pressure defined as 101325 Pa and formerly used as unit of pressure. For practical purposes it has been replaced by the bar which is 105 Pa...
of boost at 2,800 rpm. The DB605 suffered from reliability problems during the first year of operation, and this output was initially banned by VT-Anw.Nr.2206, forcing Luftwaffe units to limit maximum power output to 1,310 PS (1,292 hp, 964 kW) at 2,600 rpm and 1.3 atm manifold pressure. The full output was not reinstated until 8 June 1943 when Daimler-Benz issued a technical directive. Up to 1944, the G-series was powered by the 1,475 PS Daimler-Benz DB 605 driving a three-blade VDM 9-12087A variable-pitch propeller with a diameter of 3 m (9.8 ft) with even broader blades than used on the F-series. Pitch control, as on the 109F, was either "electro-mechanical"" (automatic) or "manual-electric" using a thumb-switch on the throttle lever. From 1944 a new high-altitude propeller with broader blades was introduced, designated VDM 9-12159, and was fitted to high-altitude variants with the DB 605AS or D-series engines.
The early versions of the Bf 109G closely resembled the Bf 109 F-4 and carried the same basic armament; however, as the basic airframe was modified to keep pace with different operational requirements, the basically clean design began to change. From the spring of 1943, the G-series saw the appearance of bulges in the cowling when the 7.92 mm (.312 in) MG 17 were replaced with 13 mm (.51 in) MG 131 machine gun
MG 131 machine gun
The MG 131 was a German 13 mm caliber machine gun developed in 1938 by Rheinmetall-Borsig and produced from 1940 to 1945...
s (G-5 onwards) due to the latter's much larger breechblock
Breechblock
A breechblock is the part of the firearm action that closes the breech of a weapon at the moment of firing....
, and on the wings (due to larger tyres), leading to the Bf 109 G-6's nickname "Die Beule" ("The Bulge"). The Bf 109G continued to be improved: new clear-view cockpits, greater firepower in the form of the 30 mm (1.18 in) MK 108 cannon were introduced in late 1943; and a new, enlarged supercharger for the DB605, a larger vertical stabilizer (G-5 onwards), and MW 50
MW 50
MW 50 was a 50-50 mixture of methanol and water that was often sprayed into the supercharger of World War II aircraft engines primarily for its anti-detonant effect, allowing the use of increased boost pressures.Secondary effects were cooling of the engine and charge cooling...
power boost in 1944.
Erich Hartmann
Erich Hartmann
Erich Alfred Hartmann , nicknamed "Bubi" by his comrades and "The Black Devil" by his Soviet enemies, was a German World War II fighter pilot and is the highest-scoring fighter ace in the history of aerial warfare...
, the World's top scoring fighter ace, claiming 352 victories, flew only the Bf 109G, of which he said:
From the Bf 109 G-5 on an enlarged wooden tail unit (identifiable by a taller vertical stabilizer and rudder with a morticed
Mortise and tenon
The mortise and tenon joint has been used for thousands of years by woodworkers around the world to join pieces of wood, mainly when the adjoining pieces connect at an angle of 90°. In its basic form it is both simple and strong. Although there are many joint variations, the basic mortise and tenon...
balance tab, rather than the angled shape) was often fitted. This tail unit was standardised on G-10s and K-4s. Although the enlarged tail unit improved handling, especially on the ground, it weighed more than the standard metal tail unit and required that a counterweight was fitted in the nose, increasing the variant's overall weight.
With the Bf 109G, a number of special versions were introduced to cope with special mission profiles. Here, long-range fighter-reconnaissance and high-altitude interceptors can be mentioned. The former were capable of carrying two 300 L (80 US gal) drop tanks, one under each wing; and the latter received pressurized cockpits for pilot comfort and GM-1
GM-1
GM-1 , colloquially known as Haha-Gerät was a system for injecting nitrous oxide into aircraft engines that was used by the Luftwaffe in World War II. This increased the amount of oxygen in the fuel mixture, and thereby improve high-altitude performance...
nitrous oxide "boost" for high altitudes. The latter system, when engaged, was capable of increasing engine output by 223 kW above the rated altitude to increase high-altitude performance.
Early Bf 109G models
G-1, G-2
The G-1, produced from February 1942, was the first of the G-series. This was the first production Bf 109 with a pressurized cockpit and could be identified by the small, horn-shaped air intake for the cockpit compressor just above the supercharger intake, on the left upper cowling. In addition, the angled armour plate for the pilot's head was replaced by a vertical piece which sealed-off the rear of the side-hinged cockpit canopy. Small, triangular armour-glass panels were fitted into the upper corners of this armour, although there were aircraft in which the plate was solid steel. Silica gelSilica gel
Silica gel is a granular, vitreous, porous form of silica made synthetically from sodium silicate. Despite its name, silica gel is a solid. It is a naturally occurring mineral that is purified and processed into either granular or beaded form...
capsules were placed in each pane of the windscreen and opening canopy to absorb any moisture which may have been trapped in the double glazing
Insulated glazing
Insulated glazing also known as double glazing are double or triple glass window panes separated by an air or other gas filled space to reduce heat transfer across a part of the building envelope....
. The last 80 G-1s built were lightweight G-1/R2. In these GM-1 nitrous oxide 'boost' was used, and the pilot's back armour was removed, as were all fittings for the long-range drop tank. A few G-1 flown by I./JG 1 are known to have carried the underwing 20 mm MG 151/20 cannon gondolas.
The G-2, which started production in May 1942, lacked the cabin pressurization and GM-1 installation. Performance-wise it was identical to the G-1. The canopy reverted to one layer of glazing
Acrylic glass
Poly is a transparent thermoplastic, often used as a light or shatter-resistant alternative to glass. It is sometimes called acrylic glass. Chemically, it is the synthetic polymer of methyl methacrylate...
and incorporated the angled head armour used on the F-4, although several G-2 had the vertical type as fitted to the G-1. Several Rüstsätze could be fitted, although installing these did not change the designation of the aircraft. Instead the "/R" suffix referred to the G-2's Rüstzustand or equipment condition of the airframe, which was assigned at the factory rather than in the field. There were two Rüstzustand planned for G-2s:
- G-2/R1: had one 300 L (80 US gal) drop tank beneath each wing, plus an ETC bomb rack under the fuselage, capable of carrying a 500 kg (1,100 lb) bomb and an auxiliary undercarriage unit beneath the fuselage. Also could carry a large jettisonable tail wheel, just aft of the cockpit.
- G-2/R2: a reconnaissance aircraft with GM-1 and camera equipment.
The rack and internal fuel lines for carrying a 300 L (80 US gal) drop-tank were widely used on G-2s, as were the underwing 20 mm MG 151/20 cannon gondolas. Several G-2s were fitted with the ETC 500 bomb rack, capable of carrying one 250 kg (550 lb) bomb. The final G-2 production batches built by Erla and Messerschmitt Regensburg
Regensburg
Regensburg is a city in Bavaria, Germany, located at the confluence of the Danube and Regen rivers, at the northernmost bend in the Danube. To the east lies the Bavarian Forest. Regensburg is the capital of the Bavarian administrative region Upper Palatinate...
were equipped as tropical aircraft (often referred to as G-2 trop), equipped with a sand-filter on the front of the supercharger intake and two small, teardrop-shaped metal brackets on the left side of the fuselage, below the cockpit sill. These were used as mounts for specially designed sun umbrellas (called Sonderwerkzeug or Special tool), which were used to shade the cockpit.
A total of 167 G-1s were built between February and June 1942, 1,586 G-2s between May 1942 and February 1943, and one further G-2 was built in Győr, Hungary, in 1943. Maximum speed of the G-2 was 537 km/h (334 mph) at sea level and 660 km/h (410 mph) at 7,000 m (22,970 ft) rated altitude with the initial reduced 1.3 atm rating. Performance of the G-1 was similar, but above rated altitude the GM-1 system it was equipped with could be used to provide an additional 350 horsepower. With his G-1/R2, pilot R. Klein achieved 660 km/h (420 mph) at 12,000 m (39,370 ft), and a ceiling of 13,800 m (45,275 ft).
The following variants of the G-1 and G-2 were produced:
- G-0 (Pre-production aircraft, powered by a DB 601E engine)
- G-1 (Pressurized fighter, powered by a Db 605A engine)
- G-1/R2 (Reconnaissance fighter)
- G-1/U2 (High-altitude fighter with GM-1)
- G-2 (Light fighter)
- G-2/R1 (Long-range Fighter-bomber or JaboRei, with 2 × 300 L/80 US gal underwing drop tanks, one 500 kg/1,100 lb bomb under fuselage, extended second tail wheel for large bombs, only prototype)
- G-2/R2 (Reconnaissance fighter)
- G-2 trop (Tropicalized fighter)
G-3, G-4
In September 1942, the G-4 appeared; this version was identical to the G-2 in all respects, including performance, except for being fitted with the FuG 16Luftwaffe radio equipment (Funkgerät) of WW II
During World War II, the German Luftwaffe relied on an increasingly diverse array of communications , IFF and RDF equipment for use in their aircraft and on the ground. Most of this equipment received the generic prefix FuG for FunkGerät or Radio Equipment. Most of the aircraft-mounted Radar...
VHF
Very high frequency
Very high frequency is the radio frequency range from 30 MHz to 300 MHz. Frequencies immediately below VHF are denoted High frequency , and the next higher frequencies are known as Ultra high frequency...
radio set, which provided much clearer radio transmissions and had three-times the range of the earlier HF
High frequency
High frequency radio frequencies are between 3 and 30 MHz. Also known as the decameter band or decameter wave as the wavelengths range from one to ten decameters . Frequencies immediately below HF are denoted Medium-frequency , and the next higher frequencies are known as Very high frequency...
sets. Externally this could be recognised by the position of the fuselage antenna lead-in which was moved further aft to between frames seven and eight on the fuselage spine. Due to the steady weight increases of the 109, from the spring of 1943 larger 660 x 160 mm (26 x 6.3 in) mainwheels were introduced, replacing the previously used 650 x 150 mm (25.6 x 6 in) type. The undercarriage legs were altered so that the wheel's vertical axis was nearly upright rather than being parallel with the oleo
Shock absorber
A shock absorber is a mechanical device designed to smooth out or damp shock impulse, and dissipate kinetic energy. It is a type of dashpot.-Nomenclature:...
leg. These changes resulted in the fitting of teardrop-shaped fairings to the upper wing surface above the wheel-wells to accommodate the upper part of the mainwheels. The larger wheels and fairings were often retrofitted to G-2s.The last production G-2s were fitted with the enlarged mainwheels and tailwheel while the first of the G-4s used the smaller wheels. In addition, a larger 350 x 135 mm (14 x 5 in) tailwheel replaced the original 290 x 110 mm (11 x 4 in) one; the larger tailwheel no longer fitted the recess, so the retraction mechanism was disconnected and the tailwheel fixed down. Up to July 1943, 1,242 G-4s were produced, with an additional four in Győr and WNF factories in the second half of 1943. Between January and February 1943, 50 examples of a pressurized version, the G-3 were also produced; similar to the G-1 although it was equipped with the same FuG 16 VHF radio set as the G-4.
The following variants of the G-3 and G-4 were produced:
- G-3 (Pressurized fighter, as G-1 with FuG 16 VHF radio; 50 built)
- G-4 (Fighter)
- G-4/R2 (Reconnaissance fighter)
- G-4/R3 (Long-range reconnaissance fighter, with 2 × 300 L/80 US gal underwing droptanks)
- G-4 trop (Tropicalized fighter)
- G-4/U3 (Reconnaissance fighter)
- G-4y (Command fighter)
G-5, G-6
In February 1943, the G-6 was introduced with the 13 mm (.51 in) MG 131s, replacing the smaller 7.92 mm (.312 in) MG 17 – externally this resulted in two sizeable Beule blisters over the gun breeches, reducing speed by 9 km/h (6 mph). Over 12,000 examples were built well into 1944 although contradictory factory and RLM records do not allow an exact tally. The G-5 with a pressurized cockpit was identical to the G-6. A total of 475 examples were built between May 1943 and August 1944. The G-5/AS was equipped with a DB 605AS engine for high-altitude missions. GM-1-boosted G-5 and G-6 variants received the additional designation of "/U2". and were clearly identifyable as they use a modified, aerodynamically cleaner, engine cowl without the usual blisters.The following variants of the G-5 and G-6 were produced:
- G-5 (Pressurized fighter)
- G-5/U2 (High-altitude fighter with GM-1 boost)
- G-5/U2/R2 (High-altitude reconnaissance fighter with GM-1 boost)
- G-5/AS (High-altitude fighter with DB 605AS engine)
- G-5y (Command fighter)
- G-6 (Light fighter)
- G-6/R2 (Reconnaissance fighter, with MW 50MW 50MW 50 was a 50-50 mixture of methanol and water that was often sprayed into the supercharger of World War II aircraft engines primarily for its anti-detonant effect, allowing the use of increased boost pressures.Secondary effects were cooling of the engine and charge cooling...
) - G-6/R3 (Long-range reconnaissance fighter, with 2 × 300 L/80 US gal underwing droptanks)
- G-6 trop (Tropicalized fighter)
- G-6/U2 (Fitted with GM-1)
- G-6/U3 (Reconnaissance fighter)
- G-6/U4 (As G-6 but with 30 mm/1.18 in MK 108 Motorkanone engine cannon)
- G-6y (Command fighter)
- G-6/AS (High-altitude fighter with DB 605AS engine)
- G-6/ASy (High-altitude command fighter)
- G-6N (Night fighter, usually with Rüstsatz VI (two underwing MG 151/20 cannons) and sometimes with FuG 350Z NaxosNaxos radar detectorThe FuG 350 Naxos radar warning receiver was a World War II German countermeasure to SHF band centimetric wavelength radar produced by a cavity magnetron...
) - G-6/U4 N (as G-6N but with 30 mm/1.18 in MK 108 Motorkanone engine cannon)
- G-6/R2 (Reconnaissance fighter, with MW 50
One offensive weapons upgrade in 1943 for the Bf 109G was one that mounted the Army`s Werfer-Granate 21 rocket weapon system with one launching tube under each wing panel. The rockets, fitted with a massive 40,8 kg (90 lbs) warhead, were aimed via the standard Revi reflector sight
Reflector sight
A reflector or reflex sight is a generally non-magnifying optical device that allows the user to look through a partially reflecting glass element and see an illuminated projection of an aiming point or some other image superimposed on the field of view...
s, and were spin-stabilized in flight. In emergency, the tubes could be jettisoned via a small explosive charge. Intended as a "stand-off" weapon, fired from a distance of 1,200 meters and outside the effective range of the formations defensive guns, it was employed against Allied bomber formations, the Wfr. Gr. 21 rocket was unofficially known as the BR 21 (Bordrakete 21 cm) for the Bf 109G-5, G-6 and G-14. The weapons system received the designation of Rüstsatz VII on the G-10.
Improvements to the design
During the course of 1943, a number of improvements were gradually introduced. In an attempt to increase the pilot's field of view an armoured glass head-rest, the so-called Galland Panzer was developed, and subsequently began replacing the bulky armour plate in the spring of 1943. Towards the end of the year the clear-view Erla Haube canopy appeared, named after one of the sub-contractors involved in building the Bf 109. Often mis-named the "Galland Hood" in postwar Western aviation books and periodicals, it eventually replaced the older heavily framed two-piece canopy on the Bf 109G. The canopy structure was completely redesigned to incorporate a greater area of clear perspex; the welded framing was reduced to a minimum and there was no longer a fixed rear portion, with the entire structure aft of the windscreen being hinged to swing to starboard when opened.The Bf 109 G-10, AS-engined G-5s, G-6s and G-14s as well as the K-4 saw a refinement of the engine cowlings. The blisters which had formerly covered the spent shell-casing chutes of the MG 131s became more streamlined and were lengthened and enlarged to cover both the weapons and the engine bearers. Initial prototype versions were symmetrical, but as larger superchargers were fitted, the engines required modified upper engine bearers to clear the supercharger housing, and as a result the final shape of the new cowling was asymmetrical, being enlarged on the port side where the supercharger was mounted on the DB engine. There were also special streamlined panels fitted to the forward fuselage. These so-called agglomerations could be seen in several different patterns. Because of their aerodynamically more efficient form in a side-view of DB 605AS and D -powered Bf 109 Gs and Ks, the agglomerations were barely discernible compared with the conspicuous fairings they replaced.
Late-production G-6, G-14, G-14/AS
Some versions of the G-6 and later Gs had a taller, wood-structure tail unit and redesigned rudder which improved stability at high speeds. The introduction of the WGr. 21 cm (8 in) under-wing mortar/rockets and the 30 mm (1.18 in) MK 108 cannon increased firepower. Certain production batches of the Bf 109G were fitted with aileronAileron
Ailerons are hinged flight control surfaces attached to the trailing edge of the wing of a fixed-wing aircraft. The ailerons are used to control the aircraft in roll, which results in a change in heading due to the tilting of the lift vector...
Flettner tabs
Servo tab
A servo tab is a small hinged device installed on an aircraft control surface to assist the movement of the control surface.-Servo tabs:...
to decrease stick forces at high speeds. A radio-navigational method, the Y-Verführung (Y-Guidance) was introduced with the FuG 16ZY.
Subsequent Bf 109G versions were essentially modified versions of the basic G-6 airframe. Early in 1944, new engines with larger superchargers for improved high-altitude performance (DB 605AS), or with MW-50 water injection
Water injection (engines)
In internal combustion engines, water injection, also known as anti-detonant injection, is spraying water into the cylinder or incoming fuel-air mixture to cool the combustion chambers of the engine, allowing for greater compression ratios and largely eliminating the problem of engine knocking...
for improved low/medium-altitude performance (DB 605AM), or these two features combined (DB 605ASM) were introduced into the Bf 109 G-6. Maximum speed of the G-5/G-6 was 530 km/h (320 mph) at sea level, 640 km/h (391 mph) at 6,600 m (21,650 ft)-rated altitude at 1.42 atm boost.
The G-14 arrived in July 1944 at the invasion front over France. It represented an attempt to create a standard type, incorporating many changes which had been introduced during production of the G-6, and which led to a plethora of variants, plaguing decentralized mass production. The standardization attempt proved to be a failure, but overall the type offered improved combat performance, as MW 50
MW 50
MW 50 was a 50-50 mixture of methanol and water that was often sprayed into the supercharger of World War II aircraft engines primarily for its anti-detonant effect, allowing the use of increased boost pressures.Secondary effects were cooling of the engine and charge cooling...
power boosting water injection
Water injection
The term water injection may refer to:*Water injection , for increasing efficiency or power of internal combustion engines*Water injection , for increasing the amount of petroleum extracted from oil wells...
(increasing output to 1,800 PS (1,775 hp, 1,324 kW), the clear-view Erla Haube was now standard installation. Top speed was 568 km/h (353 mph) at sea level, and 665 km/h (413 mph) at 5 km (16,400 ft) altitude. A high-altitude fighter, designated G-14/AS was also produced with the DB 605ASM high-altitude engine. The ASM engine was built with a larger capacity supercharger, and had a higher rated altitude, and correspondingly the top speed of the G-14/AS was 560 km/h (348 mph) at sea level, and 680 km/h (422 mph) at 7,5 km (24,600 ft) altitude.
There was increasing tendency to use plywood on some less vital parts e.g. on a taller tailfin/rudder unit, pilot seat or instrument panel. A caution estimate based on the available records suggest that about 5,500 G-14s and G-14/AS were built.
The following variants of the G-14 were produced:
- G-14 (Fighter; standardized late-production G-6; DB 605AM engine, MW 50 boost)
- G-14/AS (High-altitude fighter with DB 605ASM engine, MW 50 boost)
- G-14/ASy (High-altitude command fighter)
- G-14y (command fighter)
- G-14/U4 (As G-14, but with 30 mm/1.18 in MK 108 Motorkanone engine cannon)
G-10
The most recognizable external change was the use of the "Erla-Haube" clear-view canopy. Internal changes included inheriting the new 2,000 W generator and the DB 605 D-2 engine of the 109K. Apart from the standardised streamlined engine cowlings, G-10s with the DB605 D-2 were equipped as standard with the MW-50 booster system (DB 605DM) and had a larger Fo 987 oil cooler housed in a deeper fairing. Also, because of the engine's enlarged crankcase and the oil return lines which ran in front of it, these G-10s had small blister fairings incorporated into the lower engine cowlings, forward of and below the exhaust stacks.
The following variants of the G-10 were produced:
- G-10 (Light fighter with DB605DM or DB/DC engine)
- G-10/R2 (Bad-weather fighter with PKS 12 autopilot)
- G-10/R5 (Reconnaissance fighter)
- G-10/R6 (Bad-weather fighter)
- G-10/U4 (As G-10 but with 30 mm/1.18 in MK 108 Motorkanone engine cannon)
Approximately 2,600 G-10s were produced from October 1944 until the war's end.
Miscellaneous variants: G-8, G-12
The G-8 was a dedicated reconnaissance version based on the G-6. The G-8 often had only the Motorkanone engine cannon or the cowling machine guns installed, and there were several subversions for short- or long-range reconnaissance missions with a wide variety of cameras and radios available for use.The Bf 109 G-12 was a two-seat trainer version of the Bf 109. This was a conversion of "war-weary" or rebuilt G-4 and G-6 airframes; the space needed for the second cockpit was gained by reducing the internal fuel capacity to only 240 L (60 US gal) meaning that the 300 L (80 US gal) drop tank was employed as standard equipment. This version was rarely armed with anything more than one or two cowling machine guns. The rear cockpit canopy was bowed out to give the instructor, who sat behind the student pilot in an armoured seat, a clearer view. The rear cockpit was also equipped with a basic instrument panel and all flight controls.
Bf 109G subtypes and variants
The base subtypes could be equipped with Rüstsatz add-on standard field kits; in practice this meant hanging on some sort of additional equipment like droptanks, bombs or cannons to standard attachment points, present on all production aircraft. Aircraft could be modified in the factory with Umrüst-bausatz (Umbau) conversion kits or by adding extra equipment, designated as Rüstzustand, to convert standard airframes for special roles – a reconnaissance- or bad-weather fighter, for example. Unlike the Rüstsatz field-kits, these modifications were permanent.The Rüstsatz kits were designated by the letter "R" and a Roman numeral. Rüstsatz kits did not alter the aircraft's designation, so a Bf 109 G-6 with Rüstsatz II (50 kg/110 lb bombs) remained designated as 'Bf 109 G-6', and not 'G-6/R2' – the G-6/R2 was a reconnaissance fighter with MW 50, as suggested by most publications. The Umrüst-Bausatz, Umbau, or Rüstzustand were identified with either an "/R" or "/U" suffix and an Arabic number, e.g. Bf 109 G-10/U4.
Common Rüstsatz kits: Bf 109G:
- R I (ETC 501/IX b bomb rack under the fuselage, fusing equipment for an SC 250 or SD 250 type 250 kg (550 lb) bomb)
- R II (ETC 50/VIII d bomb rack under the fuselage, fusing equipment, for four SC 50 type 50 kg (110 lb) bombs)
- R III (Schloß 503A-1 rack for one fuselage drop tank (300 L/80 US gal))
- R IV (two 30 mm (1.18 in) Rheinmetall-Borsig MK 108 underwing gunpods)
- R VI (two 20 mm Mauser MG 151/20 underwing gunpods with 135 rpg)
- R VII (Peilrufanlage)
Common Umrüst-Bausatz (Umbau) numbers:
- U1 (Messerschmitt P6 reversible-pitch propeller to be used as air brake, only prototypes)
- U2 (GM-1 boost, during 1944 several hundred converted to MW-50 boost)
- U3 (Reconnaissance conversion, in autumn 1943 G-6/U3 adopted as G-8 production variant)
- U4 (30 mm (1.18 in) MK 108 Motorkanone engine-mounted cannon)
Bf 109H
Wingspan
The wingspan of an airplane or a bird, is the distance from one wingtip to the other wingtip. For example, the Boeing 777 has a wingspan of about ; and a Wandering Albatross caught in 1965 had a wingspan of , the official record for a living bird.The term wingspan, more technically extent, is...
was increased through the addition of new, constant-chord inner wing panels to 11.92 m (39.11 ft), and the widened stabilizer again received a supporting strut leading from the fuselage. Maximum speed was 750 km/h (470 mph) at 10,100 m (33,140 ft). A small number of Bf 109 H-1s were built, flying several sorties over Britain and France. Bf 109 H-2 and H-5 developments were also planned, but the entire H-series was scrapped because of wing flutter problems.
- H-0 (Pre-production aircraft, rebuilt from F-4/Z, powered by a DB 601E engine with GM-1 boost)
- H-1 (Production version, based on G-5 airframes, powered by a DB 605A engine with GM-1 boost)
A record exists of one particular Bf 109H-1, Werknummer 110073, was recorded as having been converted to a photo-recon aircraft by a Luftwaffe long-range reconnaissance group, Fernaufklärungsgruppe 123, in May of 1944, and flown on dates immediately following the Invasion of Normandy
Operation Overlord
Operation Overlord was the code name for the Battle of Normandy, the operation that launched the invasion of German-occupied western Europe during World War II by Allied forces. The operation commenced on 6 June 1944 with the Normandy landings...
with one mission meant to scan the entire French coastline from Cherbourg to Ouistreham
Ouistreham
Ouistreham is a commune in the Calvados department' in the Basse-Normandie region in northwestern France.Ouistreham is a small port with fishing boats, leisure craft and a ferry-harbour. It serves as the port of the city of Caen. The town is about the mouth of the Canal de Caen à la...
, from an altitude of some 15 km (49,200 ft), which proved to be just beyond the achievable ceiling of the selected aircraft.
K-4
The Bf 109K was the last of the series to see operational duty and the last in the Bf 109 evolutionary line. The K series was a response to the bewildering array of series, models, modification kits and factory conversions for the Bf 109, which made production and maintenance complicated and costly — something Germany could ill-afford late in the war. The RLM ordered Messerschmitt to rationalise production of the Bf 109, consolidating parts, types, and so on, to produce a uniform, standard model with better interchangeability of parts and equipment. At the same time, the existing flaws of the design were to be remedied. Work on the new version began in the spring of 1943, and the prototype was ready by the autumn of that year. Series production started in August 1944 with the K-4 model, due to changes in the design and delays with the new DB 605D powerplant. The K-4 was the only version to be mass produced.Externally the K series could be identified by changes in the locations of the radio equipment hatch,The shape of the hatch was changed in that the lower edge sloped up slightly to the front. which was moved forward and to a higher position between frames four and five, and the filler point for the fuselage fuel tank, which was moved forward to a location between frames two and three. In addition, the D/F loop was moved aft to sit between frames three and four on the top fuselage spine and a small circular plate above the footstep on the port side of the fuselage was deleted. The rudder was fitted as standard with a Flettner tab
Servo tab
A servo tab is a small hinged device installed on an aircraft control surface to assist the movement of the control surface.-Servo tabs:...
and two fixed tabs although some rare examples were not fitted with the fixed tabs. All K-4s were to be fitted with a long retractable tailwheel (350 x 135 mm/14 x 5 in) with two small clamshell doors covering the recess when the tail-wheel was retracted.
The wings featured the large rectangular fairings for the large 660 x 190 mm (26 x 7 in) main wheels. Small wheel well doors, originally planned for the G series, were fitted to the outer ends of the wheel bays, covering the outer wheels when retracted. These doors were often removed by front-line units. The ailerons were fitted with small, adjustable trim tabs. The radio equipment was the FuG 16ZY
Luftwaffe radio equipment (Funkgerät) of WW II
During World War II, the German Luftwaffe relied on an increasingly diverse array of communications , IFF and RDF equipment for use in their aircraft and on the ground. Most of this equipment received the generic prefix FuG for FunkGerät or Radio Equipment. Most of the aircraft-mounted Radar...
with an antenna mast fitted under the port outer wing and FuG 25a IFF as well as the FuG 125 Hermine D/F equipment. Internally, the oxygen bottles were relocated from the rear fuselage to the right wing. Flettner tabs
Servo tab
A servo tab is a small hinged device installed on an aircraft control surface to assist the movement of the control surface.-Servo tabs:...
for the ailerons were also to be fitted to serial production aircraft to reduce control forces, but are only seen on photos of later production aircraft.
Armament of the K-4 consisted of a 30 mm (1.18 in) MK 108 engine-mounted cannon (Motorkanone) with 65 rounds, and two 13 mm (.51 in) MG 131s in the nose with 300 rpg although some K-4s were fitted with the MG 151/20 as the Motorkanone. Additional Rüstsätze, or equipment kits, such as a 300 L (80 US gal) drop tank (R III), bombs up to the size of 500 kg/1,100 lb (R I), underwing 20 mm Mauser MG 151/20 cannon gondola pods (R IV) or 21 cm (8 in) Wfr.Gr. 21 rockets (as on the Gustav models) could be carried after minimal preparations; the latter two however were rarely used by Bf 109 units at this stage of the war, but there is evidence that III./JG 26 were almost completely equipped with K-4s which were fitted with R IV. In addition there were problems with the 30 mm (1.18 in) MK 108 Motorkanone:
Power was provided by a Daimler-Benz DB 605DM (early models) of 1,800 PS output and later the DB 605DB/DC powerplant with 1,850/2,000 PS output. A wide-chord, three bladed VDM 9-12159 propeller of 3 m diameter was used, as on the G-6/AS, G-14/AS and G-10.
Deliveries began in mid-October 1944. 534 examples had been delivered by the Messerschmitt A.G., Regensburg by the end of November 1944, and 856 by the end of the year. Regensburg delivered a total of 1593 by the end of March 1945, after which production figures are missing. With such a high rate of production, despite continuous heavy fighting, by the end of January 1945 314 K-4s - about every fourth 109 - were listed on hand with the 1st line Luftwaffe units. Ultimately it was intended to equip all Bf 109 units with the 109K, which marked the final stage of 109 development before the jet age.
The Bf 109 K-4 was the fastest 109 of World War II, reaching 715 km/h (445 mph) at 7,500 m (24,610 ft) altitude; improved propellers were being developed when the war ended which would boost the speed to 727 km/h (452 mph), and 741 km/h (460 mph) was expected with a swept-back propeller design. Rate of climb was outstanding
4820 ft (1,469.1 m)/min at 1.98 atm
Atmosphere (unit)
The standard atmosphere is an international reference pressure defined as 101325 Pa and formerly used as unit of pressure. For practical purposes it has been replaced by the bar which is 105 Pa...
. The standard Revi 16C reflector sight
Reflector sight
A reflector or reflex sight is a generally non-magnifying optical device that allows the user to look through a partially reflecting glass element and see an illuminated projection of an aiming point or some other image superimposed on the field of view...
was fitted, which was to be replaced later by the EZ 42 Gyro gunsight
Gyro gunsight
A gyro gunsight is a modification of the non-magnifying reflector sight in which target lead and bullet drop are allowed for automatically, the sight incorporating a gyroscopic mechanism that computes the necessary deflections required to ensure a hit on the target...
. With such improvements in performance, the Bf 109 remained comparable to opposing fighters until the end of the war. However, the deteriorating ability of the thousands of novice Luftwaffe pilots by this stage of the war meant the 109's strengths were of little value against the numerous and well-trained Allied fighter pilots.
Other Bf 109K projects and prototypes
Several other versions were projected based on the 109K airframe - K-6, K-8, K-10 and K-14. In the proposed K-6 the armament would have been two 13 mm (.51 in) MG 131 above the engine, along with a 30 mm (1.18 in) MK 108 Motorkanone and an internally-mounted MK 108 in each wing, with 45 rpg. Alternatively, the wing MK 108s could be substituted by 20 mm MG 151/20s, with 100 rpg. Armour weight was increased to 200 lb (90.7 kg). Takeoff weight was 7986 lb (3,622.4 kg). Some K-6 prototypes were built and tested at the Tarnewitz weapons-testing centre.Project drawings of the K-8 show an K-series airframe powered by the two-stage DB 605L high altitude engine, a high-velocity 30 mm (1.18 in) MK 103mot Motorkanone, and two 30 mm (1.18 in) MK 108 cannons in the wings; the cowl 13 mm (.51 in) MG 131s were dispensed with.
Some sources point to limited use of the K-14, intended as high-altitude heavy fighter. Two airframes are listed as delivered to II./JG52 under Major Wilhelm Batz in late spring of 1945, these being armed with only one 30 mm (1.18 in) cannon, but the type's existence cannot be positively confirmed. The K-14 was to be powered by the two-stage supercharged DB 605L engine, the use of a four-bladed propeller 460 mi/h, and an operational altitude of 38000 ft (11,582.4 m) was projected. Armour and armament were otherwise similar to the K-6.
Common Rüstsatz kits, Bf 109K
- R I ETC 501/IX b or Schloß 503belly bomb rack, fusing equipment for fitting a 250 kg (550 lb) or 500 kg (1,100 lb) bomb
- R III Schloß 503A-1 rack for one fuselage drop tank (300 L/80 US gal).
- R IV BSK 16 gun-camera in the left wing between nose ribs 3 and 4.
- R VI two 20 mm Mauser MG 151/20 underwing gunpods with 135 rpg.
Known variants
- K-0 Pre-production aircraft, powered by a DB 605DM engine
- K-2 proposed version without pressurized cockpit
- K-4 only serial production version without pressurized cockpit, powered by a DB 605DM, DB or DC engine
- K-6 proposed heavy fighter version, as K-4 with reinforced wings holding two additional 30 mm MK 108 cannons and additional armour
- K-8 proposed reconnaissance version, equipment similar to G-8
- K-10 proposed version, similar to K-6, MK 103M engine cannon instead of MK 108
- K-12 proposed version, dual-seat trainer similar to G-12
- K-14 proposed version, similar to K-6, powered by a DB 605L engine
Bf 109X
As the BMW 801BMW 801
The BMW 801 was a powerful German air-cooled radial aircraft engine built by BMW and used in a number of German military aircraft of World War II. The engine's cylinders were in two rows of seven cylinders each, the bore and stroke were both 156 mm , giving a total capacity of 41.8 litres...
radial engine
Radial engine
The radial engine is a reciprocating type internal combustion engine configuration in which the cylinders point outward from a central crankshaft like the spokes on a wheel...
became available, a Bf 109F, Werknummer 5608, callsign D-ITXP was converted with a BMW 801 A-0. This aircraft became a prototype for the Bf 109X. The fuselage had a wider cross-section, and a new canopy was fitted. The wing tips were akin to that of the Bf 109E. The prototype was first flown by Flugkapitän Fritz Wendel
Fritz Wendel
Fritz Wendel was a German test pilot during the 1930s and 1940s.-Achievements:On 26 April 1939 Fritz Wendel set the world air speed record of 469.22 mph, flying the Messerschmitt Me 209 V1...
on 2 September 1940, and the test flights continued despite troubles with the BMW 801A powerplant. Development was stopped in early 1942.
Bf 109Z "Zwilling"
F-82 Twin Mustang
The North American F-82 Twin Mustang was the last American piston-engine fighter ordered into production by the United States Air Force. Based on the P-51 Mustang, the F-82 was originally designed as a long-range escort fighter in World War II; however, the war ended well before the first...
. In the preproduction model, the right fuselage cockpit was faired over and the pilot flew the aircraft from the left side fuselage. Four variants of this aircraft were proposed, one an interceptor armed with five 30 mm (1.18 in) cannons, and up to a 1,000 kg (2,200 lb) bomb load, the second a fighter bomber version, armed with two MK 108 cannons and up to two 2,200 lb. bombs. Both airframes were to be powered by the DB605 engine. A third and fourth were designed on paper and would be similar to the first two airframes but powered by Jumo 213 engines. Only one Bf 109Z was built, and it was never flown, having been damaged in an Allied bombing raid while in hangar and the project was permanently abandoned in 1944.
Czechoslovak production
Czechoslovakia
Czechoslovakia or Czecho-Slovakia was a sovereign state in Central Europe which existed from October 1918, when it declared its independence from the Austro-Hungarian Empire, until 1992...
as the Avia S-99 and Avia S-199
Avia S-199
|-See also:-External links: *** with more pictures and further information...
. These were modified Bf 109G-14s, the latter with the inferior Junkers Jumo 211
Junkers Jumo 211
|-See also:-References:* Jane's Fighting Aircraft of World War II. London. Studio Editions Ltd, 1989. ISBN 0-517-67964-7-External links:*...
F engine, which resulted in an aircraft with remarkably poor handling characteristics and a tendency to crash during landings. As noted above, Czech pilots who had previously flown Spitfires for the RAF nicknamed the aircraft Mezek ("Mule"). They were replaced in frontline service by Soviet jets in 1952, but flew on as trainers for another five years.
Several of the S-199s were sold to Israel
Israel
The State of Israel is a parliamentary republic located in the Middle East, along the eastern shore of the Mediterranean Sea...
, forming the basis of the fledgeling Israeli Air Force
Israeli Air Force
The Israeli Air Force is the air force of the State of Israel and the aerial arm of the Israel Defense Forces. It was founded on May 28, 1948, shortly after the Israeli Declaration of Independence...
.
Spanish production
Spain
Spain , officially the Kingdom of Spain languages]] under the European Charter for Regional or Minority Languages. In each of these, Spain's official name is as follows:;;;;;;), is a country and member state of the European Union located in southwestern Europe on the Iberian Peninsula...
, two versions of the Bf 109G-2, the Hispano Aviación HA-1112 "Tripala" and "Buchon", were built under license, the former with the Hispano-Suiza
Hispano-Suiza
Hispano-Suiza was a Spanish automotive and engineering firm, best known for its luxury cars and aviation engines in the pre-World War II period of the twentieth century. In 1923, its French subsidiary became a semi-autonomous partnership with the parent company and is now part of the French SAFRAN...
engine, and the latter with the same Rolls-Royce Merlin
Rolls-Royce Merlin
The Rolls-Royce Merlin is a British liquid-cooled, V-12, piston aero engine, of 27-litre capacity. Rolls-Royce Limited designed and built the engine which was initially known as the PV-12: the PV-12 became known as the Merlin following the company convention of naming its piston aero engines after...
engines that had powered Spitfires. Many of these aircraft have been used for theatrical purposes, posing (rather unconvincingly, given their very distinctive undernose air intakes, mandated by the R-R Merlin engines they used) as "Emils" and "Gustavs" in Battle of Britain
Battle of Britain (film)
Battle of Britain is a 1969 Technicolor film directed by Guy Hamilton, and produced by Harry Saltzman and S. Benjamin Fisz. The film broadly relates the events of the Battle of Britain...
and Tuskegee Airmen
Tuskegee Airmen
The Tuskegee Airmen is the popular name of a group of African American pilots who fought in World War II. Formally, they were the 332nd Fighter Group and the 477th Bombardment Group of the U.S. Army Air Corps....
, respectively. These modifications were carried out in the Hispano Aviación
Hispano Aviacion
Hispano Aviación was a Spanish aircraft factory which began production in 1939, after a section of the Hispano-Suiza factory was isolated into a "Nationalist" area during the Spanish Civil War....
factory in Seville
Seville
Seville is the artistic, historic, cultural, and financial capital of southern Spain. It is the capital of the autonomous community of Andalusia and of the province of Seville. It is situated on the plain of the River Guadalquivir, with an average elevation of above sea level...
. Germany had agreed to let Spain have 25 un-assembled Bf 109G-2s to help familiarize the Spanish with the Messerschmitt plane. The wings and airframes arrived but not the engines, so the Spanish installed the French Hispano-Suiza engine, and then fitted Rolls-Royce Merlins as late as 1956. A few were still in active service until the late 1960s. The Ha 1112 was produced until 1958.
External links
- Bf 109 Restoration
- Bf 109 Aircraft Variations
- Luftwaffe Archive
- The 109 Lair
- 109F-4 documents
- Photo gallery of Messerschmitt Bf 109G-5
- Resource on Messerschmitt Bf 109 performance.
- Translated German pilot accounts and material on the Reich's defence Geschwader JG 300
- Messerschmitt 109 - myths versus facts. Reviews from the pilots who flew the Bf 109.
- Japanese Army tests of Messerschmitt Bf 109 E in Japan.
- BF-109 Markings 1939-1940 {Reference only}