Chain drive
Encyclopedia
Chain drive is a way of transmitting mechanical power from one place to another. It is often used to convey power to the wheels of a vehicle, particularly bicycle
Bicycle
A bicycle, also known as a bike, pushbike or cycle, is a human-powered, pedal-driven, single-track vehicle, having two wheels attached to a frame, one behind the other. A person who rides a bicycle is called a cyclist, or bicyclist....

s and motorcycle
Motorcycle
A motorcycle is a single-track, two-wheeled motor vehicle. Motorcycles vary considerably depending on the task for which they are designed, such as long distance travel, navigating congested urban traffic, cruising, sport and racing, or off-road conditions.Motorcycles are one of the most...

s. It is also used in a wide variety of machines besides vehicles.

Most often, the power is conveyed by a roller chain
Roller chain
Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire and tube drawing machines, printing presses, cars, motorcycles, and simple machines like...

, known as the drive chain or transmission chain, passing over a sprocket
Sprocket
A sprocket or sprocket-wheel is a profiled wheel with teeth, cogs, or even sprockets that mesh with a chain, track or other perforated or indented material. The name 'sprocket' applies generally to any wheel upon which are radial projections that engage a chain passing over it...

 gear, with the teeth of the gear meshing with the holes in the links of the chain. The gear is turned, and this pulls the chain putting mechanical force into the system. Another type of drive chain is the Morse chain, invented by the Morse Chain Company of Ithaca, New York
Ithaca, New York
The city of Ithaca, is a city in upstate New York and the county seat of Tompkins County, as well as the largest community in the Ithaca-Tompkins County metropolitan area...

, USA. This has inverted teeth.

Sometimes the power is output by simply rotating the chain, which can be used to lift or drag objects. In other situations, a second gear is placed and the power is recovered by attaching shafts or hubs to this gear. Though drive chains are often simple oval loops, they can also go around corners by placing more than two gears along the chain; gears that do not put power into the system or transmit it out are generally known as idler-wheel
Idler-wheel
An idler-wheel drive is a system used to transmit the rotation of the main shaft of a motor to another rotating device. For example the platter of a record-reproducing turntable or the crankshaft-to-camshaft gear train of an automobile....

s. By varying the diameter of the input and output gears with respect to each other, the gear ratio
Gear ratio
The gear ratio of a gear train is the ratio of the angular velocity of the input gear to the angular velocity of the output gear, also known as the speed ratio of the gear train. The gear ratio can be computed directly from the numbers of teeth of the various gears that engage to form the gear...

 can be altered, so that, for example, the pedals of a bicycle can spin all the way around more than once for every rotation of the gear that drives the wheels.

History

The oldest known application of a chain drive appears in the Polybolos
Polybolos
Polybolos was an ancient Greek repeating ballista reputedly invented by Dionysius of Alexandria, a 3rd century BC Greek engineer at the Rhodes arsenal and used in antiquity. Philo of Byzantium encountered and described the polybolos, a catapult that like a modern machine gun could fire again and...

, a repeating crossbow
Repeating crossbow
A repeating crossbow is a crossbow where the separate actions of stringing the bow, placing the bolt and shooting it can be accomplished with a simple one-handed movement while keeping the crossbow stationary. This allows a higher rate of fire than a normal crossbow...

 described by the Greek
History of Greece
The history of Greece encompasses the history of the territory of the modern state of Greece, as well as that of the Greek people and the areas they ruled historically. The scope of Greek habitation and rule has varied much through the ages, and, as a result, the history of Greece is similarly...

 engineer Philon of Byzantium (3rd century BC). Two flat-linked chains were connected to a windlass
Windlass
The windlass is an apparatus for moving heavy weights. Typically, a windlass consists of a horizontal cylinder , which is rotated by the turn of a crank or belt...

, which by winding back and forth would automatically fire the machine's arrows until its magazine was empty. Although the device did not transmit power continuously since the chains "did not transmit power from shaft to shaft", the Greek design marks the beginning of the history of the chain drive since "no earlier instance of such a cam is known, and none as complex is known until the 16th century. It is here that the flat-link chain, often attributed to Leonardo da Vinci
Leonardo da Vinci
Leonardo di ser Piero da Vinci was an Italian Renaissance polymath: painter, sculptor, architect, musician, scientist, mathematician, engineer, inventor, anatomist, geologist, cartographer, botanist and writer whose genius, perhaps more than that of any other figure, epitomized the Renaissance...

, actually made its first appearance."

The first continuous power-transmitting chain drive was depicted in the written horological
Horology
Horology is the art or science of measuring time. Clocks, watches, clockwork, sundials, clepsydras, timers, time recorders and marine chronometers are all examples of instruments used to measure time.People interested in horology are called horologists...

 treatise of the Song Dynasty
Song Dynasty
The Song Dynasty was a ruling dynasty in China between 960 and 1279; it succeeded the Five Dynasties and Ten Kingdoms Period, and was followed by the Yuan Dynasty. It was the first government in world history to issue banknotes or paper money, and the first Chinese government to establish a...

 (960–1279) Chinese
History of China
Chinese civilization originated in various regional centers along both the Yellow River and the Yangtze River valleys in the Neolithic era, but the Yellow River is said to be the Cradle of Chinese Civilization. With thousands of years of continuous history, China is one of the world's oldest...

 engineer Su Song
Su Song
Su Song was a renowned Chinese polymath who specialized himself as a statesman, astronomer, cartographer, horologist, pharmacologist, mineralogist, zoologist, botanist, mechanical and architectural engineer, poet, antiquarian, and ambassador of the Song Dynasty .Su Song was the engineer of a...

 (1020-1101 AD), who used it to operate the armillary sphere
Armillary sphere
An armillary sphere is a model of objects in the sky , consisting of a spherical framework of rings, centred on Earth, that represent lines of celestial longitude and latitude and other astronomically important features such as the ecliptic...

 of his astronomical
Astronomical clock
An astronomical clock is a clock with special mechanisms and dials to display astronomical information, such as the relative positions of the sun, moon, zodiacal constellations, and sometimes major planets.-Definition:...

 clock tower
Clock tower
A clock tower is a tower specifically built with one or more clock faces. Clock towers can be either freestanding or part of a church or municipal building such as a town hall. Some clock towers are not true clock towers having had their clock faces added to an already existing building...

 as well as the clock jack figurines presenting the time of day by mechanically banging gongs and drums. The chain drive itself was given power via the hydraulic works of Su's water clock tank and waterwheel, the latter which acted as a large gear
Escapement
In mechanical watches and clocks, an escapement is a device that transfers energy to the timekeeping element and enables counting the number of oscillations of the timekeeping element...

.

The endless power-transmitting chain drive was invented separately in Europe by Jacques de Vaucanson in 1770 for a silk
Silk
Silk is a natural protein fiber, some forms of which can be woven into textiles. The best-known type of silk is obtained from the cocoons of the larvae of the mulberry silkworm Bombyx mori reared in captivity...

 reeling and throwing mill. J. F. Tretz was the first to apply the chain drive to the bicycle
Bicycle
A bicycle, also known as a bike, pushbike or cycle, is a human-powered, pedal-driven, single-track vehicle, having two wheels attached to a frame, one behind the other. A person who rides a bicycle is called a cyclist, or bicyclist....

 in 1869.

Chains versus belts

Drive chains are most often made of metal, while belts are often rubber, plastic, or other substances. Although well-made chains may prove stronger than belts, their greater mass increases drive train inertia
Inertia
Inertia is the resistance of any physical object to a change in its state of motion or rest, or the tendency of an object to resist any change in its motion. It is proportional to an object's mass. The principle of inertia is one of the fundamental principles of classical physics which are used to...

.

Drive belts can often slip (unless they have teeth) which means that the output side may not rotate at a precise speed, and some work gets lost to the friction
Friction
Friction is the force resisting the relative motion of solid surfaces, fluid layers, and/or material elements sliding against each other. There are several types of friction:...

 of the belt against its rollers. Teeth on toothed drive belts generally wear faster than links on chains, but wear on rubber or plastic belts and their teeth is often easier to observe; you can often tell a belt is wearing out and about to break more easily than a chain.

Conventional roller chain drives suffer the potential for vibration, as the effective radius of action in a chain and sprocket combination constantly changes during revolution. If the chain moves at constant speed, then the shafts must accelerate and decellerate constantly. If a drive sprocket rotates at constant RPM, then the chain (and probably the driven sprocket) must accelerate and decellerate constantly. This is usually not an issue with many drive systems, however most motorcycles are fitted with a rubber bushed rear wheel hub to virtually eliminate this vibration issue. Toothed belt drives are designed to avoid this issue by operating at a constant pitch radius.

Chains are often narrower than belts, and this can make it easier to shift them to larger or smaller gears in order to vary the gear ratio. Multi-speed bicycles with derailleurs
Derailleur gears
Derailleur gears are a variable-ratio transmission system commonly used on bicycles, consisting of a chain, multiple sprockets of different sizes, and a mechanism to move the chain from one sprocket to another...

 make use of this. Also, the more positive meshing of a chain can make it easier to build gears that can increase or shrink in diameter, again altering the gear ratio.

Both can be used to move objects by attaching pockets, buckets, or frames to them; chains are often used to move things vertically by holding them in frames, as in industrial toasters, while belts are good at moving things horizontally in the form of conveyor belt
Conveyor belt
A conveyor belt consists of two or more pulleys, with a continuous loop of material - the conveyor belt - that rotates about them. One or both of the pulleys are powered, moving the belt and the material on the belt forward. The powered pulley is called the drive pulley while the unpowered pulley...

s. It is not unusual for the systems to be used in combination; for example the rollers that drive conveyor belts are themselves often driven by drive chains.

Drive shafts are another common method used to move mechanical power around that is sometimes evaluated in comparison to chain drive; in particular shaft drive versus chain drive is a key design decision for most motorcycles. Drive shafts tend to be even tougher and more reliable than chain drive, but weigh even more (robbing more power), and impart rotational torque
Torque
Torque, moment or moment of force , is the tendency of a force to rotate an object about an axis, fulcrum, or pivot. Just as a force is a push or a pull, a torque can be thought of as a twist....

. Virtually all high performance motorcycles use chain drive, with shaft driven arrangements generally used for many non-sporting machines. Toothed belt drives are used for many lower power motorcycles.

Bicycles

Chain drive was the main feature which differentiated the safety bicycle
Safety bicycle
A safety bicycle is a type of bicycle that became very popular beginning in the late 1880s as an alternative to the penny-farthing or ordinary and is now the most common type of bicycle. Early bicycles of this style were known as safety bicycles because they were noted for, and marketed as, being...

 introduced in 1885, with its two equal-sized wheels, from the direct-drive
Direct drive mechanism
A Direct drive mechanism is one that takes the power coming from a motor without any reductions .-Advantages:* Increased efficiency: The power is not wasted in friction...

 penny-farthing
Penny-farthing
Penny-farthing, high wheel, high wheeler, and ordinary are all terms used to describe a type of bicycle with a large front wheel and a much smaller rear wheel that was popular after the boneshaker, until the development of the safety bicycle, in the 1880s...

 or "high wheeler" type of bicycle. The popularity of the chain-driven safety bicycle brought about the demise of the penny-farthing, and is still a basic feature of bicycle design today.

Transmitting power to the wheels

Chain drive was a popular power transmission system from the earliest days of the automobile
Automobile
An automobile, autocar, motor car or car is a wheeled motor vehicle used for transporting passengers, which also carries its own engine or motor...

. It gained prominence as an alternative to the Système Panhard with its rigid Hotchkiss
Hotchkiss drive
The Hotchkiss drive is a system of power transmission. It was the dominant form of power transmission for front-engine, rear-wheel drive layout cars in the 20th century...

driveshaft
Driveshaft
A drive shaft, driveshaft, driving shaft, propeller shaft, or Cardan shaft is a mechanical component for transmitting torque and rotation, usually used to connect other components of a drive train that cannot be connected directly because of distance or the need to allow for relative movement...

 and universal joint
Universal joint
A universal joint, universal coupling, U joint, Cardan joint, Hardy-Spicer joint, or Hooke's joint is a joint or coupling in a rigid rod that allows the rod to 'bend' in any direction, and is commonly used in shafts that transmit rotary motion...

s.

A chain-drive system uses one or more roller chain
Roller chain
Roller chain or bush roller chain is the type of chain drive most commonly used for transmission of mechanical power on many kinds of domestic, industrial and agricultural machinery, including conveyors, wire and tube drawing machines, printing presses, cars, motorcycles, and simple machines like...

s to transmit power from a differential
Differential (mechanics)
A differential is a device, usually, but not necessarily, employing gears, capable of transmitting torque and rotation through three shafts, almost always used in one of two ways: in one way, it receives one input and provides two outputs—this is found in most automobiles—and in the other way, it...

 to the rear axle
Axle
An axle is a central shaft for a rotating wheel or gear. On wheeled vehicles, the axle may be fixed to the wheels, rotating with them, or fixed to its surroundings, with the wheels rotating around the axle. In the former case, bearings or bushings are provided at the mounting points where the axle...

. This system allowed for a great deal of vertical axle movement (for example, over bumps), and was simpler to design and build than a rigid driveshaft in a workable suspension. Also, it had less unsprung weight at the rear wheels than the Hotchkiss drive, which would have had the weight of the driveshaft to carry as well, which in turn meant that the tires would last longer.

Frazer Nash
Frazer Nash
Frazer Nash was a British sports car manufacturer and engineering company founded by Archibald Frazer-Nash in 1922. It produced sports cars incorporating a unique multi-chain transmission before World War II and also imported BMW cars to the UK. After the war it continued producing sports cars with...

 were strong proponents of this system using one chain per gear selected by dog clutches. The Frazer Nash chain drive system, (designed for the GN Cyclecar Company
GN (car)
thumb|right|200px|Richard Scaldwell's JAP-engined GN Grand Prix special at the VSCC SeeRed race meeting, Donington Park, September 2007. The GN has a 5.1 litre V8 aero-engine shoehorned into its lightweight cyclecar frame....

 by Archibald Frazer-Nash
Archibald Frazer-Nash
Archibald Goodman Frazer Nash , was an early English motor car designer and engineer, who specialised in manufacturer of light and sports cars in England....

 and Henry Ronald Godfrey
Henry Ronald Godfrey
Henry Ronald Godfrey , was an early English motor car design engineer.Born near London, he met Archibald Frazer-Nash at technical college, to produce the GN cycle car...

) was very effective, allowing extremely fast gear selections. The Frazer Nash (or GN) transmission system provided the basis for many "special" racing cars of the 1920s and 1930s, the most famous being Basil Davenport's Spider which held the outright record at the Shelsley Walsh Speed Hill Climb
Shelsley Walsh Speed Hill Climb
The Shelsley Walsh Speed Hill Climb is a hillclimb in Worcestershire, England, organised by the Midland Automobile Club . It is one of the oldest motorsport events in the world, and is in fact the oldest to have been staged continuously on its original course, first having been run in 1905...

 in the 1920s.

Parry-Thomas was killed during a land speed record
Land speed record
The land speed record is the highest speed achieved by a wheeled vehicle on land. There is no single body for validation and regulation; in practice the Category C flying start regulations are used, officiated by regional or national organizations under the auspices of the Fédération...

 attempt in his car 'Babs
Babs (Land speed record car)
Babs was the land speed record car built and driven by John Parry-Thomas. It was powered by a 27-litre Liberty aero-engine.Babs began as 'Chitty 4', one of Count Louis Zborowski's series of aero-engined cars named 'Chitty Bang Bang'. As it was built at Zborowski's estate of Higham Park near...

' when the chain final-drive broke, decapitating him.

The last popular chain drive automobile was the Honda S600
Honda S600
The Honda S600 is an automobile manufactured by Honda. It was launched in March 1964. It was the first Honda car to be offered in two versions: as a roadster – bearing strong resemblance to the Honda S500 – and as a fastback coupé , introduced in March 1965...

 of the 1960s.

Inside motors

Internal combustion engine
Internal combustion engine
The internal combustion engine is an engine in which the combustion of a fuel occurs with an oxidizer in a combustion chamber. In an internal combustion engine, the expansion of the high-temperature and high -pressure gases produced by combustion apply direct force to some component of the engine...

s often use chain drive to power the timing chain used to drive overhead camshaft
Overhead camshaft
Overhead cam valvetrain configurations place the engine camshaft within the cylinder heads, above the combustion chambers, and drive the valves or lifters in a more direct manner compared to overhead valves and pushrods...

 valvetrain
Valvetrain
Valvetrain is an all-encompassing term used to describe the mechanisms and parts which control the operation of the valves. A traditional reciprocating internal combustion engine uses valves to control air and fuel flow into and out of the cylinders, facilitating combustion.-Layout:Valvetrain: The...

s. This is an area in which chain drives frequently compete directly with belt drive systems, and an excellent example of some of the differences and similarities between the two approaches. For this application, chains last longer, but are often harder to replace. Being heavier, the chain robs more power, but is also less likely to fail. The camshaft of a four stroke engine must rotate at half crankshaft speed, so some form of reduction gearing is needed and a direct drive from the crankshaft isn't possible. Alternatives to chain drives include gear trains, bevel gear and shaft drives, or toothed flexible belt drives.

Transfer cases

Today, inverted tooth drive chains are commonly used in passenger car
Automobile
An automobile, autocar, motor car or car is a wheeled motor vehicle used for transporting passengers, which also carries its own engine or motor...

 and light truck
Light truck
Light truck or light duty truck is a U.S. classification for trucks or truck-based vehicles with a payload capacity of less than 4,000 pounds...

 transfer case
Transfer case
A transfer case is a part of a four-wheel-drive system found in four-wheel-drive and all-wheel-drive vehicles. The transfer case is connected to the transmission and also to the front and rear axles by means of drive shafts...

s.
Transfer case
Transfer case
A transfer case is a part of a four-wheel-drive system found in four-wheel-drive and all-wheel-drive vehicles. The transfer case is connected to the transmission and also to the front and rear axles by means of drive shafts...


Motorcycles

Chain drive versus belt drive or use of a driveshaft
Driveshaft
A drive shaft, driveshaft, driving shaft, propeller shaft, or Cardan shaft is a mechanical component for transmitting torque and rotation, usually used to connect other components of a drive train that cannot be connected directly because of distance or the need to allow for relative movement...

 is a fundamental design decision in motorcycle design; nearly all motorcycles use one of these three designs. See Motorcycle construction
Motorcycle construction
Motorcycle components and systems for a motorcycle are engineered, manufactured, and assembled in order to produce motorcycle models with the desired performance, aesthetics, and cost...

for more details.

External links

The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK