List of welding codes
Encyclopedia
American Society of Mechanical Engineers (ASME) Codes
The American Society of Mechanical EngineersAmerican Society of Mechanical Engineers
The American Society of Mechanical Engineers is a professional body, specifically an engineering society, focused on mechanical engineering....
(ASME) Boiler and Pressure Vessel Code
ASME Boiler and Pressure Vessel Code (BPVC)
The ASME Boiler and Pressure Vessel Code is an American Society of Mechanical Engineers standard that provides rules for the design, fabrication, and inspection of boilers and pressure vessels...
(BPVC) covers all aspects of design and manufacture of boilers and pressure vessels. All sections contain welding specifications, however most relevant information is contained in the following:
| Code | Description |
|---|---|
| ASME BPVC Section V | Non destructive testing |
| ASME BPVC Section IX | Welding and Brazing Qualifications |
| ASME B16.25 | Buttwelding ends |
American Welding Society (AWS) Standards
The American Welding SocietyAmerican Welding Society
The American Welding Society is a nonprofit organization dedicated to advancing the science, technology, and application of welding and allied joining and cutting processes, including brazing, soldering, and thermal spraying...
(AWS) publishes over 240 AWS-developed codes, recommended practices and guides which are written in accordance with American National Standards Institute (ANSI) practices. The following is a partial list of the more common publications:
| Standard Number† | Title |
|---|---|
| AWS A02.4 | Standard symbols for welding, brazing, and non-destructive examination |
| AWS A03.0 | Standard welding terms and definitions |
| AWS A05.1 | Specification for carbon steel electrodes for shielded metal arc welding |
| AWS A05.18 | Specification for carbon steel electrodes and rots for gas shielded arc welding |
| AWS B01.10 | Guide for the nondestructive examination of welds |
| AWS D01.1 | Structural welding (steel) |
| AWS D01.2 | Structural welding (aluminum) |
| AWS D01.3 | Structural welding (sheet steel) |
| AWS D01.4 | Structural welding (reinforcing steel) |
| AWS D01.5 | Bridge welding |
| AWS D01.6 | Structural welding (stainless steel) |
| AWS D01.7 | Structural welding (strengthening and repair) |
| AWS D01.8 | Structural welding seismic supplement |
| AWS D01.9 | Structural welding (titanium) |
| AWS D08.1 | Automotive spot welding |
| AWS D08.6 | Automotive spot welding electrodes supplement |
| AWS D08.7 | Automotive spot welding recommendations supplement |
| AWS D08.8 | Automotive arc welding (steel) |
| AWS D08.9 | Automotive spot weld testing |
| AWS D08.14 | Automotive arc welding (aluminum) |
| AWS D09.1 | Sheet metal welding |
| AWS D10.10 | Heating practices for pipe and tube |
| AWS D10.11 | Root pass welding for pipe |
| AWS D10.12 | Pipe welding (mild steel) |
| AWS D10.13 | Tube brazing (copper) |
| AWS D10.18 | Pipe welding (stainless steel) |
| AWS D11.2 | Welding (cast iron) |
| AWS D14.1 | Industrial mill crane welding |
| AWS D14.3 | Earthmoving & agricultural equipment welding |
| AWS D14.4 | Machinery joint welding |
| AWS D14.5 | Press welding |
| AWS D14.6 | Industrial mill roll surfacing |
| AWS D15.1 | Railroad welding |
| AWS D15.2 | Railroad welding practice supplement |
| AWS D16.1 | Robotic arc welding safety |
| AWS D16.2 | Robotic arc welding system installation |
| AWS D16.3 | Robotic arc welding risk assessment |
| AWS D16.4 | Robotic arc welder operator qualification |
| AWS D17.1 | Aerospace fusion welding |
| AWS D17.2 | Aerospace resistance welding |
| AWS D18.1 | Hygienic tube welding (stainless steel) |
| AWS D18.2 | Stainless steel tube discoloration guide |
| AWS D18.3 | Hygienic equipment welding |
| †The zero after the first letter is only placed there so the table can be sorted. i.e. D01.1 is actually D1.1). | |
(Note: The zero after the first letter is only placed there so the table can be sorted. i.e. D01.1 is actually D1.1)
American Petroleum Institute (API) Standards
The American Petroleum InstituteAmerican Petroleum Institute
The American Petroleum Institute, commonly referred to as API, is the largest U.S trade association for the oil and natural gas industry...
(API) oldest and most successful programs is in the development of API standards which started with its first standard in 1924. API maintains over 500 standards covering the oil and gas field. The following is a partial list specific to welding:
| Standard Number | Description |
|---|---|
| API RP 577 | Welding Inspection and Metallurgy |
| API 1104 | Welding of piplelines and related facilities |
Australian / New Zealand (AS/NZS) Standards
Standards AustraliaStandards Australia
Standards Australia was established in 1922 and is recognised through a Memorandum of Understanding with the Australian government as the peak non-government standards development body in Australia. It is a company limited by guarantee, with 72 members representing groups interested in the...
is the body responsible for the development, maintenance and publication of Australian Standards. The following is a partial list specific to welding:
| Standard Number | Description |
|---|---|
| AS/NZS 1554.1 | Structural steel welding - Welding of steel structures |
| AS/NZS 1554.2 | Structural steel welding - Stud welding (steel studs to steel) |
| AS/NZS 1554.3 | Structural steel welding - Welding of reinforcing steel |
| AS/NZS 1554.4 | Structural steel welding - Welding of high strength quenched and tempered steels |
| AS/NZS 1554.5 | Structural steel welding - Welding of steel structures subject to high levels of fatigue loading |
| AS/NZS 1554.6 | Structural steel welding - Welding stainless steels for structural purposes |
| AS/NZS 1554.7 | Structural steel welding - Welding of sheet steel structures |
| AS/NZS 3992 AS/NZS 1200 The AS/NZS 1200 standard is a joint Australian/New Zealand Standard, for the requirements of pressure equipment which promote safety and uniformity throughout Australia and New Zealand.-History:... |
Pressure equipment - Welding and brazing qualification |
Canadian Standards Association (CSA) Standards
The Canadian Standards AssociationCanadian Standards Association
The Canadian Standards Association, also known as the CSA, is a not-for-profit Standards organization with the stated aim of developing standards for use in 57 different areas of specialisation...
(CSA) is responsible for the development, maintenance and publication of CSA standards. The following is a partial list specific to welding:
| Standard Number | Description |
|---|---|
| CSA W47.1 | Certification of Companies for Fusion Welding of Steel |
| CSA W59 | Welded Steel Construction (Metal Arc Welding) |
| CSA W59.2 | Welded Aluminum Construction |
British Standards (BS)
British StandardsBritish Standards
British Standards are the standards produced by BSI Group which is incorporated under a Royal Charter...
are developed, maintained and published by BSI Standards which is UK's National Standards Body. The following is a partial list of standards specific to welding:
| Standard Number | Description |
|---|---|
| BS 0499-1 | Welding terms and symbols. Glossary for welding, brazing and thermal cutting |
| BS 0499-2C | Welding terms and symbols. European arc welding symbols in chart form |
| BS 2633 | Specification for Class I arc welding of ferritic steel pipework for carrying fluids |
| BS 2971 | Specification for class II arc welding of carbon steel pipework for carrying fluids |
| BS 4515-1 | Specification for welding of steel pipelines on land and offshore - Part 1: Carbon and carbon manganese steel pipelines |
| BS 4515-2 | Specification for welding of steel pipelines on land and offshore. Duplex stainless steel pipelines |
| PD 6705-2 | Structural use of steel and aluminium. Recommendations for the execution of steel bridges to BS EN 1090-2 |
| PD 6705-3 | Structural use of steel and aluminium. Recommendations for the execution of aluminium structures to BS EN 1090-3 |
International Organization for Standardization (ISO) Standards
International Organization for StandardizationInternational Organization for Standardization
The International Organization for Standardization , widely known as ISO, is an international standard-setting body composed of representatives from various national standards organizations. Founded on February 23, 1947, the organization promulgates worldwide proprietary, industrial and commercial...
(ISO) has devloped over 18500 standards and over 1100 new standards are published every year. The following is a partial list of the standards specific to welding:
| Standard Number | Description |
|---|---|
| ISO 2560 | Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification |
| ISO 3580 | Covered electrodes for manual arc welding of creep-resisting steels - Code of symbols for identification |
| ISO 3581 | Covered electrodes for manual arc welding of stainless and other similar high alloy steels - Code of symbols for identification |
| ISO 3834 | Quality requirements for fusion welding of metallic materials, five parts. |
| ISO 4063 | Welding and allied processes - Nomenclature of processes and reference numbers |
| ISO 5817 | Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections |
| ISO 6520-1 | Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding |
| ISO 6520-2 | Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 2: Welding with pressure |
| ISO 6947 | Welds. Working positions. Definitions of angles of slope and rotation |
| ISO 9606 | Qualification test of welders — Fusion welding, parts 1 to 5 |
| ISO 9692-1 | Welding and allied processes. Recommendations for joint preparation. Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels |
| ISO 9692-2 | Welding and allied processes. Joint preparation. Submerged arc welding of steels |
| ISO 9692-3 | Welding and allied processes. Joint preparation. Part 3: TIG and MIG welding of aluminium and its alloys |
| ISO 13847 | Petroleum and natural gas industries - Pipeline transportation systems Pipeline transport Pipeline transport is the transportation of goods through a pipe. Most commonly, liquids and gases are sent, but pneumatic tubes that transport solid capsules using compressed air are also used.... - Welding of pipelines |
| ISO 13916 | Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat mainteanance temperature |
| ISO 13918 | Welding - Studs and ceramic ferrules for arc stud welding Stud welding Stud welding is a form of spot welding where a bolt or specially formed nut is welded onto another metal part. The bolts may be automatically fed into the spot welder. Weld nuts generally have a flange with small nubs that melt to form the weld. Studs have a necked down, un-threaded area for the... |
| ISO 13919-1 | Welding - Electron and laser-beam welded joints - Guidance on quality level for imperfections - Part 1: Steel |
| ISO 13919-2 | Welding - Electron and laser-beam welded joints - Guidance on quality level for imperfections - Part 2: Aluminium and its weldable alloys |
| ISO 13920 | Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position |
| ISO 14112 | Gas welding equipment - Small kits for gas brazing and welding |
| ISO 14175 | Welding consumables — Gases and gas mixtures for fusion welding and allied processes. Replaced EN 439:1994 in Europe. |
| ISO 14341 | Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification |
| ISO 14554 | Resistance welding |
| ISO 14744 | Electron beam welding, six parts |
| ISO 15607 | Specification and qualification of welding procedures for metallic materials - General rules |
| ISO/TR 15608 | Welding - Guidelines for a metallic material grouping system |
| ISO 15609 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification, five parts. |
| ISO 15610 | Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
| ISO 15611 | Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
| ISO 15612 | Specification and qualification of welding procedures for metallic materials — Qualification by adoption of a standard welding procedure |
| ISO 15613 | Specification and qualification of welding procedures for metallic materials — Qualification based on pre-production welding test |
| ISO 15614 | Specification and qualification of welding procedures for metallic materials - Welding procedure test, 13 parts. |
| ISO 17635 | Non-destructive testing of welds. General rules for metallic materials |
| ISO/TR 20172 | Welding — Grouping systems for materials — European materials |
| ISO/TR 20173 | Welding — Grouping systems for materials — American materials |
| ISO/TR 20174 | Welding — Grouping systems for materials — Japanese materials |
European Union (CENEuropean Committee for StandardizationThe European Committee for Standardization or Comité Européen de Normalisation , is a non-profit organisation whose mission is to foster the European economy in global trading, the welfare of European citizens and the environment by providing an efficient infrastructure to interested parties for...
) Standards
The European Committee for StandardizationEuropean Committee for Standardization
The European Committee for Standardization or Comité Européen de Normalisation , is a non-profit organisation whose mission is to foster the European economy in global trading, the welfare of European citizens and the environment by providing an efficient infrastructure to interested parties for...
had issued numerous standards covering welding processes, which replaced former national standrds. Of the former national standards, those issued by BSI
British Standards
British Standards are the standards produced by BSI Group which is incorporated under a Royal Charter...
and DIN
Din
DIN or Din or din can have several meanings:* A din is a loud noise.* Dīn, an Arabic term meaning "religion" or "way of life".* Din is one of the ten aspects of the Ein Sof in Kabbalah ....
were widely used outside their countries of origin. After the Vienna Agreement with ISO, CEN has replaced most of them with equivalent ISO standards (EN ISO series).
| Standard Number | Description |
|---|---|
| EN 287-1 | Qualification test of welders — Fusion welding — Part 1: Steels |
| EN 1090-1 | Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components |
| EN 1090-2 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| EN 1090-3 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| EN 1011-1 | Welding — Recommendations for welding of metallic materials — Part 1: General guidance for arc welding |
| EN 1011-2 | Welding — Recommendations for welding of metallic materials — Part 2: Arc welding of ferritic steels |
| EN 1011-3 | Welding — Recommendations for welding of metallic materials — Part 3: Arc welding of stainless steels |
| EN 1011-4 | Welding — Recommendations for welding of metallic materials — Part 4: Arc welding of aluminium and aluminium alloys |
| EN 1011-5 | Welding. Recommendations for welding of metallic materials. Welding of clad steel |
| EN 1011-6 | Welding. Recommendations for welding of metallic materials. Laser beam welding |
| EN 1011-7 | Welding — Recommendations for welding of metallic materials — Part 7: Electron beam welding |
| EN 1011-8 | Welding. Recommendations for welding of metallic materials. Welding of cast irons |
| EN 1993-1-8 | Eurocode Eurocode Eurocodes are a set of harmonized technical rules developed by the European Committee for Standardisation for the structural design of construction works in the European Union.The purposes of the Eurocodes are:... 3: Design of steel structures – Part 1-8: General – Design of joints |
| EN 13133 | Brazing - Brazer approval |
| EN 22553 | Welded, brazed and soldered joints – Symbolic representation on drawings |
Additional requirements for welding exist in CEN codes and standards for specific products, like EN 12952, EN 12953, EN 13445
EN 13445
EN 13445 - Unfired Pressure Vessels is a standard that provides rules for the design, fabrication, and inspection of pressure vesselsEN 13445 consists of 7 parts:* EN 13445-1 : Unfired pressure vessels - Part 1: General...
, EN 13480, etc.
German Standards (DINDinDIN or Din or din can have several meanings:* A din is a loud noise.* Dīn, an Arabic term meaning "religion" or "way of life".* Din is one of the ten aspects of the Ein Sof in Kabbalah ....
and others)
NA 092 is the Standards Committee for welding and allied processes (NAS) at DIN Deutsches Institut für Normung e. V. The following is a partial list of DIN welding standards:| Code | Description |
|---|---|
| DIN 1910-100 | Welding; terms dependent on materials for metal welding |
| DIN 18800-7 | Steel structures - Part 7: Execution and constructor's qualification |
| SEW 088 | Schweißgeeignete Feinkornbaustähle - Richtlinien für die Verarbeitung besonders für das Schmelzschweißen, Stahlinstitut VDEh |
| Merkblatt DVS 0916 | Metall-Schutzgasschwißen von Feinkornbaustählen", Deutsche Verband für Schweißtechnik e.V. |
See also
- WeldingWeldingWelding is a fabrication or sculptural process that joins materials, usually metals or thermoplastics, by causing coalescence. This is often done by melting the workpieces and adding a filler material to form a pool of molten material that cools to become a strong joint, with pressure sometimes...
- List of welding processes
- Welder certificationWelder certificationWelder certification, is a process which examines and documents a welders capability to create welds of acceptable quality following a well defined welding procedure.-Method:...
- Welding Procedure SpecificationWelding Procedure SpecificationA Welding Procedure Specification is a formal document describing welding procedures. The purpose of the document is to guide welders to the accepted procedures so that repeatable and trusted welding techniques are used. A WPS is developed for each material alloy and for each welding type used...
- WelderWelderA welder is a tradesman who specializes in welding materials together. The materials to be joined can be metals or varieties of plastic or polymer...