R and W Hawthorn
Encyclopedia
R and W Hawthorn Ltd was a locomotive
Locomotive
A locomotive is a railway vehicle that provides the motive power for a train. The word originates from the Latin loco – "from a place", ablative of locus, "place" + Medieval Latin motivus, "causing motion", and is a shortened form of the term locomotive engine, first used in the early 19th...

 manufacturer in Newcastle upon Tyne
Newcastle upon Tyne
Newcastle upon Tyne is a city and metropolitan borough of Tyne and Wear, in North East England. Historically a part of Northumberland, it is situated on the north bank of the River Tyne...

, England
England
England is a country that is part of the United Kingdom. It shares land borders with Scotland to the north and Wales to the west; the Irish Sea is to the north west, the Celtic Sea to the south west, with the North Sea to the east and the English Channel to the south separating it from continental...

 from 1817 until 1880.

Locomotive building

Robert Hawthorne first began business at Forth Bank Works in 1817, building marine and stationary steam engines. In 1820, his brother joined him and the firm became R and W Hawthorn. Possibly after having attended the Rainhill Trials
Rainhill Trials
The Rainhill Trials were an important competition in the early days of steam locomotive railways, run in October 1829 in Rainhill, Lancashire for the nearly completed Liverpool and Manchester Railway....

 in 1829, they became interested in locomotives, and sold their first engine, a 2-2-2
2-2-2
Under the Whyte notation for the classification of steam locomotives, 2-2-2 represents the wheel arrangement of two leading wheels on one axle two powered driving wheels on one axle, and two trailing wheels on one axle. The wheel arrangement both provided more stability and enabled a larger firebox...

 named Modling, to a railway in Vienna
Vienna
Vienna is the capital and largest city of the Republic of Austria and one of the nine states of Austria. Vienna is Austria's primary city, with a population of about 1.723 million , and is by far the largest city in Austria, as well as its cultural, economic, and political centre...

.

There followed a number of orders for the Stockton and Darlington Railway
Stockton and Darlington Railway
The Stockton and Darlington Railway , which opened in 1825, was the world's first publicly subscribed passenger railway. It was 26 miles long, and was built in north-eastern England between Witton Park and Stockton-on-Tees via Darlington, and connected to several collieries near Shildon...

. They were great innovators - not always successfully - and their locos had many original features.

In 1838 two were built for the broad gauge Great Western Railway
Great Western Railway
The Great Western Railway was a British railway company that linked London with the south-west and west of England and most of Wales. It was founded in 1833, received its enabling Act of Parliament in 1835 and ran its first trains in 1838...

 to the patent of T.E. Harrison, who later became the chief engineer for the North Eastern Railway
North Eastern Railway (UK)
The North Eastern Railway , was an English railway company. It was incorporated in 1854, when four existing companies were combined, and was absorbed into the London and North Eastern Railway at the Grouping in 1923...

. These could be viewed as the forerunners of the Garratt
Garratt
A Garratt is a type of steam locomotive that is articulated in three parts. Its boiler is mounted on the centre frame, and two steam engines are mounted on separate frames, one on each end of the boiler. Articulation permits larger locomotives to negotiate curves and lighter rails that might...

, with the boiler carried on a separate carriage to the cylinders and valvegear. This allowed the boiler to be large and low down, being carried on smaller wheels, while the driving wheels could be up to ten feet in diameter. With little weight on the drivers, adhesion was poor, but they ran very smoothly up to sixty miles per hour. However, the flexible steam coupling gave a great deal of trouble and they were withdrawn.

They continued to build more conventional engines, possibly under sub-contract, among them, three for the Birmingham and Derby Junction Railway
Birmingham and Derby Junction Railway
The Birmingham and Derby Junction Railway was a British railway company. From Birmingham it connected at Derby with the North Midland Railway and the Midland Counties Railway at what became known as the Tri Junct Station...

. In 1846 they bought the Leith Engine Works, in Leith
Leith
-South Leith v. North Leith:Up until the late 16th century Leith , comprised two separate towns on either side of the river....

, Scotland
Scotland
Scotland is a country that is part of the United Kingdom. Occupying the northern third of the island of Great Britain, it shares a border with England to the south and is bounded by the North Sea to the east, the Atlantic Ocean to the north and west, and the North Channel and Irish Sea to the...

, for the assembly of locomotives prepared in Newcastle. These works were sold to another company also called Hawthorns and Company, which produced some four hundred locomotives on its own account until 1872.

In 1850 the company built their first tank locomotive
Tank locomotive
A tank locomotive or tank engine is a steam locomotive that carries its water in one or more on-board water tanks, instead of pulling it behind it in a tender. It will most likely also have some kind of bunker to hold the fuel. There are several different types of tank locomotive dependent upon...

 which was supplied to the York, Newcastle and Berwick Railway In the 1850s, they also built six 4-4-0
4-4-0
Under the Whyte notation for the classification of steam locomotives, 4-4-0 represents the wheel arrangement of four leading wheels on two axles , four powered and coupled driving wheels on two axles, and no trailing wheels...

ST, Crampton locomotive
Crampton locomotive
A Crampton locomotive is a type of steam locomotive designed by Thomas Russell Crampton and built by various firms from 1846. The main British builders were Tulk and Ley and Robert Stephenson and Company....

s of the Sondes class for the East Kent Railway
East Kent Railway
The East Kent Railway was an early railway operating between Strood and the town of Faversham in Kent England, during 1858 and 1859. In the latter year it changed its name to the London, Chatham and Dover Railway to reflect its ambitions to build a rival line from London to Dover via Chatham and...

. Also, in the quest for a low centre of gravity, four 0-4-0
0-4-0
Under the Whyte notation for the classification of steam locomotives, 0-4-0 represents one of the simplest possible types, that with two axles and four coupled wheels, all of which are driven...

s with the drivers spaced at twelve feet apart connected to the cylinders by a dummy crankshaft. These were soon withdrawn, and the Cramptons rebuilt into traditional 2-4-0
2-4-0
Under the Whyte notation for the classification of steam locomotives, 2-4-0 represents the wheel arrangement of two leading wheels on one axle, four powered and coupled driving wheels on two axles, and no trailing wheels....

 tanks.

In 1859 they built an 0-4-2T well-tank locomotive for Messrs E. & J. Pickering, contractors for the construction of the Cape Town-Wellington Railway in the Cape Colony
Cape Colony
The Cape Colony, part of modern South Africa, was established by the Dutch East India Company in 1652, with the founding of Cape Town. It was subsequently occupied by the British in 1795 when the Netherlands were occupied by revolutionary France, so that the French revolutionaries could not take...

. This locomotive was the first steam locomotive to run in South Africa
South Africa
The Republic of South Africa is a country in southern Africa. Located at the southern tip of Africa, it is divided into nine provinces, with of coastline on the Atlantic and Indian oceans...

. In 1861 the Cape Town-Wellington Railway Company took over all construction, and the locomotive, from Pickerings and the locomotive became the Cape Town-Wellington Railway's no 9, later to become known as "Blackie". In 1936 it was proclaimed a national monument and has since been plinthed in the concourse at Cape Town station
Cape Town Railway Station
Cape Town railway station is the main railway station of the city of Cape Town, South Africa. It is located along Adderley and Strand Streets in the city's central business district....

.

In 1870 they built St. Peter's Works adjoining that of Robert Stephenson and Company
Robert Stephenson and Company
Robert Stephenson and Company was a locomotive manufacturing company founded in 1823. It was the first company set up specifically to build railway engines.- Foundation and early success :...

 and in 1880 amalgamated with the shipbuilder A. Leslie and Company
A. Leslie and Company
A. Leslie and Company was a shipbuilding company that was started in around 1853, based North-East England. The company later merged with the locomotive manufacturer R and W Hawthorn to create Hawthorn Leslie and Company in 1886, when the founder Andrew Leslie retired.Between 1854 and 1885 the...

, to become Hawthorn Leslie and Company
Hawthorn Leslie and Company
R. & W. Hawthorn Leslie and Company, Limited, usually referred to as Hawthorn Leslie, was a shipbuilding and locomotive manufacturer. The Company was founded on Tyneside in 1886 and ceased building ships in 1982.-History:...

.
The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK