0-6-2
Encyclopedia
Under the Whyte notation
Whyte notation
The Whyte notation for classifying steam locomotives by wheel arrangement was devised by Frederick Methvan Whyte and came into use in the early twentieth century encouraged by an editorial in American Engineer and Railroad Journal...

 for the classification of steam locomotive
Steam locomotive
A steam locomotive is a railway locomotive that produces its power through a steam engine. These locomotives are fueled by burning some combustible material, usually coal, wood or oil, to produce steam in a boiler, which drives the steam engine...

s, 0-6-2 represents the wheel arrangement
Wheel arrangement
In rail transport, a wheel arrangement is a system of classifying the way in which wheels are distributed beneath a locomotive.. Several notations exist to describe the wheel assemblies of a locomotive by type, position, and connections, with the adopted notations varying by country...

 of no leading wheel
Leading wheel
The leading wheel or leading axle of a steam locomotive is an unpowered wheel or axle located in front of the driving wheels. The axle or axles of the leading wheels are normally located in a truck...

s, six powered and coupled driving wheel
Driving wheel
On a steam locomotive, a driving wheel is a powered wheel which is driven by the locomotive's pistons...

s on three axles, and two trailing wheel
Trailing wheel
On a steam locomotive, a trailing wheel or trailing axle is generally an unpowered wheel or axle located behind the driving wheels. The axle of the trailing wheels was usually located on a trailing truck...

s on one axle. Some locomotives of this arrangement had tenders while others carried their own coal and water tanks and were designated 0-6-2T.

Equivalent classifications

Other equivalent classifications are:
  • UIC classification
    UIC classification
    The UIC classification of locomotive axle arrangements describes the wheel arrangement of locomotives, multiple units and trams. It is set out in the International Union of Railways "Leaflet 650 - Standard designation of axle arrangement on locomotives and multiple-unit sets". It is used in much...

     (also known as German classification and Italian classification): C1
  • French
    France
    The French Republic , The French Republic , The French Republic , (commonly known as France , is a unitary semi-presidential republic in Western Europe with several overseas territories and islands located on other continents and in the Indian, Pacific, and Atlantic oceans. Metropolitan France...

     classification: 031
  • Turkish
    Turkey
    Turkey , known officially as the Republic of Turkey , is a Eurasian country located in Western Asia and in East Thrace in Southeastern Europe...

     classification: 34
  • Swiss
    Switzerland
    Switzerland name of one of the Swiss cantons. ; ; ; or ), in its full name the Swiss Confederation , is a federal republic consisting of 26 cantons, with Bern as the seat of the federal authorities. The country is situated in Western Europe,Or Central Europe depending on the definition....

     classification: 3/4

United Kingdom

In the United Kingdom
United Kingdom
The United Kingdom of Great Britain and Northern IrelandIn the United Kingdom and Dependencies, other languages have been officially recognised as legitimate autochthonous languages under the European Charter for Regional or Minority Languages...

, the type was only ever used for tank engines, and was first used by William Barton Wright
William Barton Wright
William Barton Wright was a British mechanical engineer and Locomotive Superintendent of the Lancashire and Yorkshire Railway.-Family:His son Edward William Barton-Wright was a promoter of martial arts: see Bartitsu....

 of the Lancashire and Yorkshire Railway
Lancashire and Yorkshire Railway
The Lancashire and Yorkshire Railway was a major British railway company before the 1923 Grouping. It was incorporated in 1847 from an amalgamation of several existing railways...

 in 1880. The arrangement was soon afterwards used by F.W. Webb
Francis Webb (engineer)
Francis William Webb was a British engineer responsible for the design and manufacture of locomotives for the London and North Western Railway .- Biography :...

 of the London and North Western Railway
London and North Western Railway
The London and North Western Railway was a British railway company between 1846 and 1922. It was created by the merger of three companies – the Grand Junction Railway, the London and Birmingham Railway and the Manchester and Birmingham Railway...

 on his famous 'Coal Tanks'
LNWR Webb Coal Tank
The London and North Western Railway Webb Coal Tank is a class of 0-6-2T steam locomotive. They were called "Coal Tanks" because they were a side tank version of Webb's standard 17 in Coal Engine, an 0-6-0 tender engine for slow freight trains....

 of 1881-1897. Many locomotives of this type were also used to haul coal in the South Wales Valleys
Welsh 0-6-2T locomotives
This article summarizes Welsh 0-6-2T locomotives and, where possible, give links to main articles.The 0-6-2T tank locomotive could well be described as the standard steam locomotive of the railways of South Wales. Many of the independent railways used them and, at the grouping of 1923, the...

 by the Great Western Railway
Great Western Railway
The Great Western Railway was a British railway company that linked London with the south-west and west of England and most of Wales. It was founded in 1833, received its enabling Act of Parliament in 1835 and ran its first trains in 1838...

 and its predecessors.

Several railways around London later used the type for heavy suburban passenger trains, notably the London Brighton and South Coast Railway, with the E3
LB&SCR E3 Class
The London, Brighton and South Coast Railway E3 Class were 0-6-2Tside tank steam locomotives. Seventeen were built and they were designed by R. J. Billinton as a development of an earlier design by William Stroudley....

, E4
LB&SCR E4 Class
The London, Brighton and South Coast Railway E4 Class is a class of 0-6-2Tside tank steam locomotive designed by Robert Billinton. They were introduced in 1897 and were essentially a larger version of the E3 Class...

, E5
LB&SCR E5 class
The London, Brighton and South Coast Railway E5 Class is a class of 0-6-2Tside tank steam locomotive designed by Robert Billinton. They were introduced in 1902 and were a larger version of the E4 Class intended for semi-fast secondary passenger work....

 and E6
LB&SCR E3 Class
The London, Brighton and South Coast Railway E3 Class were 0-6-2Tside tank steam locomotives. Seventeen were built and they were designed by R. J. Billinton as a development of an earlier design by William Stroudley....

 classes designed by R. J. Billinton
R. J. Billinton
Robert John Billinton was the Locomotive, Carriage, Wagon and Marine Superintendent of the London, Brighton and South Coast Railway from 1890 until his death.-Early career:...

(1894–1904); by the Great Eastern Railway
Great Eastern Railway
The Great Eastern Railway was a pre-grouping British railway company, whose main line linked London Liverpool Street to Norwich and which had other lines through East Anglia...

 GER Class L77
GER Class L77
The GER Class L77, LNER Class N7, is a class of 0-6-2T steam locomotives. They were designed by Alfred John Hill of the Great Eastern Railway and introduced in 1915. The design was perpetuated by Nigel Gresley of the LNER after the 1923 grouping. 134 were built; only one of them is...

 (1914) designed by Alfred John Hill
Alfred John Hill
Alfred John Hill was Chief Mechanical Engineer at the Stratford Works of the Great Eastern Railway from 1912-1922.His best-known design is probably the GER Class L77 0-6-2 tank locomotive which was perpetuated by Nigel Gresley of the London and North Eastern Railway after the 1923...

; and the Great Northern Railway
Great Northern Railway (Great Britain)
The Great Northern Railway was a British railway company established by the Great Northern Railway Act of 1846. On 1 January 1923 the company lost its identity as a constituent of the newly formed London and North Eastern Railway....

 N1 and N2 Classes
GNR Class N2
The Great Northern Railway Class N2 is an 0-6-2T side tank steam locomotive designed by Nigel Gresley and introduced in 1920. Further batches were built by the London and North Eastern Railway from 1925...

, designed by Nigel Gresley
Nigel Gresley
Sir Herbert Nigel Gresley was one of Britain's most famous steam locomotive engineers, who rose to become Chief Mechanical Engineer of the London and North Eastern Railway . He was the designer of some of the most famous steam locomotives in Britain, including the LNER Class A1 and LNER Class A4...

 (1906–1921). Gresley later improved up the GER class with various versions of his London and North Eastern Railway
London and North Eastern Railway
The London and North Eastern Railway was the second-largest of the "Big Four" railway companies created by the Railways Act 1921 in Britain...

 N7 class built between 1925 and 1928.

South Africa

Three classes of narrow gauge
Narrow gauge
A narrow gauge railway is a railway that has a track gauge narrower than the of standard gauge railways. Most existing narrow gauge railways have gauges of between and .- Overview :...

 2-6-2T locomotives were supplied to German South-West Africa
German South-West Africa
German South West Africa was a colony of Germany from 1884 until 1915, when it was taken over by South Africa and administered as South West Africa, finally becoming Namibia in 1990...

 between 1904 and 1908. Fifteen locomotives were built by the Arnold Jung Lokomotivfabrik
Arnold Jung Lokomotivfabrik
The Arnold Jung Lokomotivfabrik was a locomotive manufacturer, in particular of Feldbahn locomotives, in Kirchen, Rheinland-Pfalz, Germany....

 in 1904, two of which were later converted into 2-6-0 tender engines by south African Railways (SAR). Ten locomotives were supplied by Henschel & Son
Henschel & Son
Henschel & Son was a German company, situated in Kassel, best known during the 20th century as a maker of transportation equipment, including locomotives, trucks, buses and trolleybuses, and armoured fighting vehicles and weapons....

 in 1904 and one survivor became SAR Class Ha. A further fifteen locomotives supplied by Henschel 1905-1908 became SAR Class Hb.

United States

In the United States
United States
The United States of America is a federal constitutional republic comprising fifty states and a federal district...

 however, 0-6-2 locomotives were largely 2-6-0
2-6-0
Under the Whyte notation for the classification of steam locomotives, 2-6-0 represents the wheel arrangement of two leading wheels on one axle, usually in a leading truck, six powered and coupled driving wheels on three axles, and no trailing wheels. This arrangement is commonly called a Mogul...

 type locomotives that had been rebuilt with a larger firebox and therefore required greater weight distribution near their backs hence the leading wheel
Leading wheel
The leading wheel or leading axle of a steam locomotive is an unpowered wheel or axle located in front of the driving wheels. The axle or axles of the leading wheels are normally located in a truck...

s were moved in the position of trailing wheel
Trailing wheel
On a steam locomotive, a trailing wheel or trailing axle is generally an unpowered wheel or axle located behind the driving wheels. The axle of the trailing wheels was usually located on a trailing truck...

s. Nearly all of these units were sent to labor as switch locomotives
Switcher
A switcher or shunter is a small railroad locomotive intended not for moving trains over long distances but rather for assembling trains ready for a road locomotive to take over, disassembling a train that has been...

 or sent on branch line
Branch line
A branch line is a secondary railway line which branches off a more important through route, usually a main line. A very short branch line may be called a spur line...

s.[
The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK