Plectrum
Encyclopedia
String instrument
A string instrument is a musical instrument that produces sound by means of vibrating strings. In the Hornbostel-Sachs scheme of musical instrument classification, used in organology, they are called chordophones...
. For hand-held instruments such as guitar
Guitar
The guitar is a plucked string instrument, usually played with fingers or a pick. The guitar consists of a body with a rigid neck to which the strings, generally six in number, are attached. Guitars are traditionally constructed of various woods and strung with animal gut or, more recently, with...
s and mandolins, the plectrum is often called a pick, and is a separate tool held in the player's hand. In harpsichord
Harpsichord
A harpsichord is a musical instrument played by means of a keyboard. It produces sound by plucking a string when a key is pressed.In the narrow sense, "harpsichord" designates only the large wing-shaped instruments in which the strings are perpendicular to the keyboard...
s, the plectra are attached to the jack mechanism.
Guitars and similar instruments
A plectrum (pick) for electric guitarElectric guitar
An electric guitar is a guitar that uses the principle of direct electromagnetic induction to convert vibrations of its metal strings into electric audio signals. The signal generated by an electric guitar is too weak to drive a loudspeaker, so it is amplified before sending it to a loudspeaker...
s, acoustic guitar
Acoustic guitar
An acoustic guitar is a guitar that uses only an acoustic sound board. The air in this cavity resonates with the vibrational modes of the string and at low frequencies, which depend on the size of the box, the chamber acts like a Helmholtz resonator, increasing or decreasing the volume of the sound...
s, bass guitar
Bass guitar
The bass guitar is a stringed instrument played primarily with the fingers or thumb , or by using a pick....
s and mandolin
Mandolin
A mandolin is a musical instrument in the lute family . It descends from the mandore, a soprano member of the lute family. The mandolin soundboard comes in many shapes—but generally round or teardrop-shaped, sometimes with scrolls or other projections. A mandolin may have f-holes, or a single...
s is typically a thin piece of plastic or other material shaped like a pointed teardrop or triangle. The size, shape and width may vary considerably. Thin items such as small coins, bread clip
Bread clip
A bread clip is a device used to hold plastic bags closed. They are also commonly called bread tags, bread tabs, bread ties, bread crimps, bread-bag clips, or bread climps...
s or broken compact disc
Compact Disc
The Compact Disc is an optical disc used to store digital data. It was originally developed to store and playback sound recordings exclusively, but later expanded to encompass data storage , write-once audio and data storage , rewritable media , Video Compact Discs , Super Video Compact Discs ,...
s and credit cards can be used as substitute plectra. Banjo and guitar players may wear a metal or plastic thumb pick mounted on a ring, and bluegrass banjo players often wear metal or plastic fingerpick
Fingerpick
A fingerpick is a type of plectrum used most commonly for playing bluegrass style banjo music. Most fingerpicks are composed of metal or plastic. Unlike flat guitar picks, which are held between the thumb and finger and used one at a time, fingerpicks clip onto or wrap around the end of the fingers...
s on their fingertips. Guitarists also use fingerpicks.
Guitar picks are made of a variety of materials, including celluloid
Celluloid
Celluloid is the name of a class of compounds created from nitrocellulose and camphor, plus dyes and other agents. Generally regarded to be the first thermoplastic, it was first created as Parkesine in 1862 and as Xylonite in 1869, before being registered as Celluloid in 1870. Celluloid is...
, metal, and rarely other exotic materials such as turtle shell, but today delrin is the most common . For other instruments in the modern day most players use plastic plectra but a variety of other materials, including wood and felt
Felt
Felt is a non-woven cloth that is produced by matting, condensing and pressing woollen fibres. While some types of felt are very soft, some are tough enough to form construction materials. Felt can be of any colour, and made into any shape or size....
(for use with the ukulele
Ukulele
The ukulele, ; from ; it is a subset of the guitar family of instruments, generally with four nylon or gut strings or four courses of strings....
) are common. Guitarists in the rock
Rock and roll
Rock and roll is a genre of popular music that originated and evolved in the United States during the late 1940s and early 1950s, primarily from a combination of African American blues, country, jazz, and gospel music...
, blues
Blues
Blues is the name given to both a musical form and a music genre that originated in African-American communities of primarily the "Deep South" of the United States at the end of the 19th century from spirituals, work songs, field hollers, shouts and chants, and rhymed simple narrative ballads...
, jazz
Jazz
Jazz is a musical style that originated at the beginning of the 20th century in African American communities in the Southern United States. It was born out of a mix of African and European music traditions. From its early development until the present, jazz has incorporated music from 19th and 20th...
and bluegrass
Bluegrass music
Bluegrass music is a form of American roots music, and a sub-genre of country music. It has mixed roots in Scottish, English, Welsh and Irish traditional music...
genres tend to use a plectrum, partly because the use of steel strings tends to wear out the fingernails quickly, and also because a plectrum provides a more 'focused' and 'aggressive' sound. Many guitarists also use the pick and the remaining right-hand fingers simultaneously to combine some advantages of flat picking and finger picking. This technique is called hybrid picking
Hybrid picking
Hybrid picking is a guitar-playing technique that involves picking with a pick and one or more fingers alternately or simultaneously. Hybrid picking allows guitar players who use a pick to perform music which would normally require fingerstyle playing. It also facilitates wide string leaps Hybrid...
.
A plectrum of the guitar type is often called a pick (or a flatpick to distinguish it from fingerpicks).
Non-Western instruments
The plectra for the JapanJapan
Japan is an island nation in East Asia. Located in the Pacific Ocean, it lies to the east of the Sea of Japan, China, North Korea, South Korea and Russia, stretching from the Sea of Okhotsk in the north to the East China Sea and Taiwan in the south...
ese biwa
Biwa
The is a Japanese short-necked fretted lute, often used in narrative storytelling. The biwa is the chosen instrument of Benten, goddess of music, eloquence, poetry, and education in Japanese Shinto....
and shamisen
Shamisen
The , also called is a three-stringed, Japanese musical instrument played with a plectrum called a bachi. The Japanese pronunciation is usually "shamisen" but sometimes "jamisen" when used as a suffix . -Construction:The shamisen is a plucked stringed instrument...
can be quite large, and those used for the Arabic oud
Oud
The oud is a pear-shaped stringed instrument commonly used in North African and Middle Eastern music. The modern oud and the European lute both descend from a common ancestor via diverging paths...
are longer and narrower, replacing the formerly used eagle feather. Plectra used for Chinese instruments such as the sanxian
Sanxian
The sanxian is a Chinese lute — a three-stringed fretless plucked musical instrument. It has a long fingerboard, and the body is traditionally made from snakeskin stretched over a rounded rectangular resonator. It is made in several sizes for different purposes and in the late 20th century a...
were formerly made of animal horn, though many players today use plastic plectra.
Plectra in harpsichords
Harpsichord
A harpsichord is a musical instrument played by means of a keyboard. It produces sound by plucking a string when a key is pressed.In the narrow sense, "harpsichord" designates only the large wing-shaped instruments in which the strings are perpendicular to the keyboard...
, there is a separate plectrum for each string. These plectra are very small, often only about a centimeter long, about 1.5 millimeters wide, and half a millimeter thick. The plectrum is gently tapered, being narrowest at the plucking end. The top surface of the plectrum is flat and horizontal, and is held in the tongue of the jack, which permits it to pluck moving upward and pass almost silently past the string moving downward.
In the historical period of harpsichord construction (up to about 1800) plectra were made of sturdy feather quills, usually from crow
Crow
Crows form the genus Corvus in the family Corvidae. Ranging in size from the relatively small pigeon-size jackdaws to the Common Raven of the Holarctic region and Thick-billed Raven of the highlands of Ethiopia, the 40 or so members of this genus occur on all temperate continents and several...
s or raven
Raven
Raven is the common name given to several larger-bodied members of the genus Corvus—but in Europe and North America the Common Raven is normally implied...
s. In Italy, some makers (including Bartolomeo Cristofori
Bartolomeo Cristofori
Bartolomeo Cristofori di Francesco was an Italian maker of musical instruments, generally regarded as the inventor of the piano.-Life:...
) used vulture
Vulture
Vulture is the name given to two groups of convergently evolved scavenging birds, the New World Vultures including the well-known Californian and Andean Condors, and the Old World Vultures including the birds which are seen scavenging on carcasses of dead animals on African plains...
quills. Other Italian harpsichords employed plectra of leather
Leather
Leather is a durable and flexible material created via the tanning of putrescible animal rawhide and skin, primarily cattlehide. It can be produced through different manufacturing processes, ranging from cottage industry to heavy industry.-Forms:...
. In late French harpsichords by the great builder Pascal Taskin
Pascal Taskin
----Pascal Joseph Taskin was a French harpsichord and piano maker. Born in Theux, near Liège, he lived most of his life in Paris.- Biography :...
, peau de buffle, a chamois
Chamois
The chamois, Rupicapra rupicapra, is a goat-antelope species native to mountains in Europe, including the Carpathian Mountains of Romania, the European Alps, the Tatra Mountains, the Balkans, parts of Turkey, and the Caucasus. The chamois has also been introduced to the South Island of New Zealand...
-like material from the hide of the European bison, was used for plectra to produce a delicate pianissimo
Dynamics (music)
In music, dynamics normally refers to the volume of a sound or note, but can also refer to every aspect of the execution of a given piece, either stylistic or functional . The term is also applied to the written or printed musical notation used to indicate dynamics...
.
Modern harpsichords frequently employ plectra made with plastic, specifically the plastic known as acetal
Polyoxymethylene
Polyoxymethylene , also known as acetal, polyacetal, and polyformaldehyde, is an engineering thermoplastic used in precision parts that require high stiffness, low friction and excellent dimensional stability....
. Some plectra are of the homopolymer variety of acetal, sold by DuPont
DuPont
E. I. du Pont de Nemours and Company , commonly referred to as DuPont, is an American chemical company that was founded in July 1802 as a gunpowder mill by Eleuthère Irénée du Pont. DuPont was the world's third largest chemical company based on market capitalization and ninth based on revenue in 2009...
under the name "Delrin", while others are of the copolymer variety, sold by Ticona
Ticona
Ticona is an international manufacturer of engineering polymers. The company's head office is located at the Ticona/Celanese-Plant in Florence, Kentucky, USA, since 2005.-Company history:...
as "Celcon". Harpsichord technicians and builders generally use the trade names to refer to these materials. In either of its varieties, acetal is far more durable than quill, which cuts down substantially on the time that must be spent in voicing (see below).
A number of contemporary builders and players have reasserted the superiority of bird quill for high-level harpsichords. While the difference in sound between acetal and quill is usually acknowledged to be small, what difference there held to be to the advantage of quill. In addition, quill plectra are observed to fail gradually, giving warning by the diminishing volume; whereas acetal plectra fail suddenly and completely, sometime in the middle of a performance.
Voicing harpsichord plectra
The plectra of a harpsichord must be cut precisely, in a process called "voicing". A properly voiced plectrum will pluck the string in a way that produces good musical tone and matches well in loudness with all of the other strings. The underside of the plectrum must be appropriately slanted and entirely smooth, so that the jack will not "hang" (get caught on the string) when, after sounding a note, it is moved back down below the level of the string.Normally, voicing is carried out by inserting the plectrum into the jack, then placing the jack on a small wooden voicing block, so that the top of the plectrum sits flush with the block. The plectrum is then cut and thinned on the underside with a small, very sharp knife, often an X-Acto knife. As the plectrum is progressively trimmed, its jack is replaced in the instrument at intervals to test the result for loudness, tone quality, and the possibility of hanging.
Voicing is a refined skill, carried out fluently by professional builders, but one that usually must also be learned (at least to some degree) by harpsichord owners.
Etymology and usage
First attested in English 15th century, the word "plectrum" comes from Latin plectrum, itself derived from GreekGreek language
Greek is an independent branch of the Indo-European family of languages. Native to the southern Balkans, it has the longest documented history of any Indo-European language, spanning 34 centuries of written records. Its writing system has been the Greek alphabet for the majority of its history;...
"πλῆκτρον" (plēktron), "anything to strike with, an instrument for striking the lyre, a spear point".
"Plectrum" has both a Latin-based plural, plectra and a native English plural, plectrums. Plectra is used in formal writing, particularly in discussing the harpsichord as an instrument of classical music. However, plectrums is more common in ordinary speech. In vernacular speech the abbreviation pleck or plec is sometimes used.
See also
- Guitar pickGuitar pickA guitar pick is a plectrum used for guitars. A pick is generally made of one uniform material; examples include plastic, nylon, rubber, felt, tortoiseshell, wood, metal, glass, and stone...
- Hybrid pickingHybrid pickingHybrid picking is a guitar-playing technique that involves picking with a pick and one or more fingers alternately or simultaneously. Hybrid picking allows guitar players who use a pick to perform music which would normally require fingerstyle playing. It also facilitates wide string leaps Hybrid...
- FingerpickFingerpickA fingerpick is a type of plectrum used most commonly for playing bluegrass style banjo music. Most fingerpicks are composed of metal or plastic. Unlike flat guitar picks, which are held between the thumb and finger and used one at a time, fingerpicks clip onto or wrap around the end of the fingers...
- MezrabMezrabA Mezrāb or zakhmeh is a plectrum which is used for several Iranian and Indian string instruments.For Sitar, a mezrab is worn on the finger of a Sitar player. It is a plectrum made by hand from a continuous strand of iron used to strike the strings of the sitar. Although it is generally worn on...
- FlatpickingFlatpickingFlatpicking is a technique for playing a guitar using a guitar pick held between two or three fingers to strike the strings...
- CrosspickingCrosspickingCrosspicking is a technique for playing the mandolin or guitar using a plectrum or flatpick in a rolling, syncopated style across three strings. This style is probably best known as one element of the flatpicking style in bluegrass music, and it closely resembles a banjo roll, the main difference...
- String instrumentString instrumentA string instrument is a musical instrument that produces sound by means of vibrating strings. In the Hornbostel-Sachs scheme of musical instrument classification, used in organology, they are called chordophones...