Flash (photography)
Encyclopedia
A flash is a device used in photography
Photography
Photography is the art, science and practice of creating durable images by recording light or other electromagnetic radiation, either electronically by means of an image sensor or chemically by means of a light-sensitive material such as photographic film...

 producing a flash of artificial light
Lighting
Lighting or illumination is the deliberate application of light to achieve some practical or aesthetic effect. Lighting includes the use of both artificial light sources such as lamps and light fixtures, as well as natural illumination by capturing daylight...

 (typically 1/1000 to 1/200 of a second) at a color temperature
Color temperature
Color temperature is a characteristic of visible light that has important applications in lighting, photography, videography, publishing, manufacturing, astrophysics, and other fields. The color temperature of a light source is the temperature of an ideal black-body radiator that radiates light of...

 of about 5500 K to help illuminate a scene. A major purpose of a flash is to illuminate a dark scene. Other uses are capturing quickly moving objects or changing the quality of light. Flash refers either to the flash of light itself or to the electronic flash unit discharging the light. Most current flash units are electronic, having evolved from single-use flashbulbs and flammable powders. Modern cameras often activate flash units automatically.

Flash units are commonly built directly into a camera. Some cameras allow separate flash units to be mounted via a standardized "accessory mount" bracket (hot shoe
Hot shoe
A hot shoe is a mounting point on the top of a camera to attach a flash unit.- Design :The hot shoe is shaped somewhat like an inverted, squared-off "U" of metal. The matching adapter on the bottom of the flash unit slides in from the back of the camera and is sometimes secured by a clamping screw...

). In professional studio equipment, flashes may be large, standalone units, or studio strobes, powered by special battery packs or connected to mains power. They are either synchronized with the camera using a flash synchronization
Flash synchronization
In a camera, flash synchronization is defined as the firing of a photographic flash coinciding with the shutter admitting light to photographic film or electronic image sensor. It is often shortened to flash sync or flash synch....

 cable or radio signal, or are light-triggered, meaning that only one flash unit needs to be synchronized with the camera, and in turn triggers the other units.

Flashbulbs

The earliest flashes had of a quantity of flash powder
Flash powder
Flash powder is a pyrotechnic composition, a mixture of oxidizer and metallic fuel, which burns quickly and if confined produces a loud report. It is widely used in theatrical pyrotechnics and fireworks and was once used for flashes in photography.Different varieties of flash powder are made from...

 consisting of a mechanical mixture of magnesium
Magnesium
Magnesium is a chemical element with the symbol Mg, atomic number 12, and common oxidation number +2. It is an alkaline earth metal and the eighth most abundant element in the Earth's crust and ninth in the known universe as a whole...

 powder and potassium chlorate
Potassium chlorate
Potassium chlorate is a compound containing potassium, chlorine and oxygen atoms, with the molecular formula KClO3. In its pure form, it is a white crystalline substance. It is the most common chlorate in industrial use...

 that was ignited by hand. Later, magnesium filaments were contained in flash bulbs filled with oxygen
Oxygen
Oxygen is the element with atomic number 8 and represented by the symbol O. Its name derives from the Greek roots ὀξύς and -γενής , because at the time of naming, it was mistakenly thought that all acids required oxygen in their composition...

 gas, and electrically ignited by a contact in the camera
Camera
A camera is a device that records and stores images. These images may be still photographs or moving images such as videos or movies. The term camera comes from the camera obscura , an early mechanism for projecting images...

 shutter
Shutter (photography)
In photography, a shutter is a device that allows light to pass for a determined period of time, for the purpose of exposing photographic film or a light-sensitive electronic sensor to light to capture a permanent image of a scene...

; such a bulb could only be used once, and was too hot to handle immediately after use, but the confinement of what would otherwise have amounted to a small explosion was an important advance. An innovation was coating flashbulbs with a blue plastic coating to match the spectral quality to daylight balanced colour film and to make it look more moderate, as well as providing shielding for the bulb in the unlikely event of it shattering during the flash. Later bulbs substituted zirconium
Zirconium
Zirconium is a chemical element with the symbol Zr and atomic number 40. The name of zirconium is taken from the mineral zircon. Its atomic mass is 91.224. It is a lustrous, grey-white, strong transition metal that resembles titanium...

 for the magnesium, which produced a brighter flash and tended to temporarily blind people.

Flashbulbs took longer to reach full brightness and burned for longer than electronic flashes. Slower shutter speeds (typically from 1/10 to 1/50 of a second) were used on cameras to ensure proper synchronization. Some shutters triggered the flashbulb a fraction of a second prior to opening, permitting use of faster shutter speeds. A widely used flashbulb through the 1960s was the number 25. This is the large (approximately 1 inch (25 mm) in diameter) flashbulb often shown used by newspapermen in period movies, usually attached to a press camera
Press camera
A press camera is a medium or large format camera suitable for use by press photographers.Press cameras were widely used from the 1900s through the early 1960s and commonly had the following features:* collapsibility into strong, compact boxes...

 or a twin-lens reflex camera
Twin-lens reflex camera
A twin-lens reflex camera is a type of camera with two objective lenses of the same focal length. One of the lenses is the photographic objective or "taking lens" , while the other is used for the viewfinder system, which is usually viewed from above at waist level...

.

Flashcubes, Magicubes and Flipflash


In the late 1960s, Kodak improved their Instamatic
Instamatic
The Instamatic was a series of inexpensive, easy-to-load 126 and 110 cameras made by Kodak beginning in 1963. The Instamatic was immensely successful, introducing a generation to low-cost photography and spawning numerous imitators....

 camera line by replacing the individual flashbulb technology (used on early Instamatics) with the Flashcube. Flashcubes consisted of four electrically fired flashbulbs with an integral reflector in a cube-shaped arrangement that allowed taking four images in a row. A mechanism in the camera automatically rotated the flashcube 90 degrees to a fresh bulb upon advancing the film to the next exposure.

The later Magicube (or X-Cube) retained the four-bulb format, and was superficially similar to the original Flashcube. However, the Magicube did not require electrical power- each bulb was set off by a plastic pin in the cube mount that released a cocked spring wire within the cube. This wire, in turn, struck a primer tube, at the base of the bulb, which contained a fulminate
Fulminate
Fulminates are chemical compounds which include the fulminate ion. The fulminate ion, is a pseudohalic ion, acting like a halogen with its charge and reactivity. Due to the instability of the ion, fulminate salts are friction-sensitive explosives. The best known is mercury fulminate, which has...

. The fulminate ignited shredded Zirconium
Zirconium
Zirconium is a chemical element with the symbol Zr and atomic number 40. The name of zirconium is taken from the mineral zircon. Its atomic mass is 91.224. It is a lustrous, grey-white, strong transition metal that resembles titanium...

 foil in the flash and, thus, a battery
Battery (electricity)
An electrical battery is one or more electrochemical cells that convert stored chemical energy into electrical energy. Since the invention of the first battery in 1800 by Alessandro Volta and especially since the technically improved Daniell cell in 1836, batteries have become a common power...

 was not required. Magicubes could also be fired by inserting a thin object, such as a key or paper clip, into one of the slots in the bottom of the cube.

Flashcubes and Magicubes are superficially similar but not interchangeable. Cameras requiring flashcubes have a round socket and a round hole for the flashcube's pin, while those requiring Magicubes have a round shape with protruding studs and a square socket hole for the Magicube's square pin. The Magicube socket can also be seen as an X, which accounts for its alternate name, X-Cube.

Another common flashbulb-based device was the Flipflash which included ten or so bulbs in a single unit. The name derived from the fact that once half the flashes had been used up, the unit had to be flipped and re-inserted to use the remainder.

Modern flash technology

's flash units often incorporate electronic
Electronics
Electronics is the branch of science, engineering and technology that deals with electrical circuits involving active electrical components such as vacuum tubes, transistors, diodes and integrated circuits, and associated passive interconnection technologies...

 flashtube
Flashtube
A flashtube, also called a flashlamp, is an electric arc lamp designed to produce extremely intense, incoherent, full-spectrum white light for very short durations. Flashtubes are made of a length of glass tubing with electrodes at either end and are filled with a gas that, when triggered, ionizes...

s, and are sometimes called speedlights or (erroneously) strobes. An electronic flash contains a tube filled with xenon
Xenon
Xenon is a chemical element with the symbol Xe and atomic number 54. The element name is pronounced or . A colorless, heavy, odorless noble gas, xenon occurs in the Earth's atmosphere in trace amounts...

 gas, where electricity of high voltage is discharged to generate an electrical arc
Electric arc
An electric arc is an electrical breakdown of a gas which produces an ongoing plasma discharge, resulting from a current flowing through normally nonconductive media such as air. A synonym is arc discharge. An arc discharge is characterized by a lower voltage than a glow discharge, and relies on...

 that emits a short flash of light. (A typical duration of the light impulse is 1/1000 second.) As of 2003, the majority of camera
Camera
A camera is a device that records and stores images. These images may be still photographs or moving images such as videos or movies. The term camera comes from the camera obscura , an early mechanism for projecting images...

s targeted for consumer use have an electronic flash unit built in.
Another type of flash unit are microflashes, which are high-voltage flash units discharging a flash of light with an exceptionally quick, sub-microsecond
Microsecond
A microsecond is an SI unit of time equal to one millionth of a second. Its symbol is µs.A microsecond is equal to 1000 nanoseconds or 1/1000 millisecond...

 duration. These are commonly used by scientists or engineers for examining extremely fast moving objects or reactions, famous for producing images of bullet
Bullet
A bullet is a projectile propelled by a firearm, sling, or air gun. Bullets do not normally contain explosives, but damage the intended target by impact and penetration...

s tearing through objects like lightbulbs or balloons (see Harold Eugene Edgerton
Harold Eugene Edgerton
Harold Eugene "Doc" Edgerton was a professor of electrical engineering at the Massachusetts Institute of Technology...

).

Studio flashes usually contain a modeling light, an incandescent lightbulb close to the flash tube. The continuous illumination of a modeling light helps in visualizing the effect of the flash.

The strength of a flash device is often indicated in terms of a guide number
Guide number
The guide number for an electronic flash measures its ability to illuminate the subject to be photographed at a specific film or sensor sensitivity and angle of view...

, despite the fact that the published guide numbers of different units can not necessarily be directly compared. The strength of larger studio flash units, such as monolight
Monolight
A monolight is a self-contained photographic flash lighting unit usually found in a studio. Each monolight has its own independent power source. It does not depend on a centralized power supply as a "pack and head" system does. Monolights are also independently controlled: each has its own power...

s are indicated in watt-seconds.

Flash intensity

Unlike flashbulbs, the intensity of an electronic flash can be adjusted on some units. Small flash units typically vary the length of time of the discharge, larger (studio) units typically charge the capacitor less. The disadvantage of charging the capacitor less is that the color temperature may change, necessitating corrections. With advances in semiconductor technology, there are some monolight (studio) units which can vary the time of the discharge.

The flash duration is typically described with two numbers: t.5 is the length of time for which the flash impulse is above 0.5 (50%) of the peak intensity, while t.1 is the length of time for which the impulse is above 0.1 (10%) of the peak (t.3 of course, would be above 30%). For instance, t.5 can be 1/1200 sec whereas t.1 can be 1/450 sec for the same flash at the same intensity. For a small flash controlling intensity by time, the t.5 and t.1 numbers decrease as the intensity decreases. On flash units controlling intensity by capacitor charge, the t.5 and t.1 numbers increase as the intensity decreases (i.e. takes longer for the capacitor to discharge to that point). These times become important if a person wants to freeze action with the flash (as in sports).

Flash intensity is typically measured in stops or in fractions (1, 1/2, 1/4, 1/8 etc.). Some monolights display an "EU Number", so that a photographer can know the difference in brightness between different flash units with different watt-second ratings. EU10.0 is defined as 6400 Watt-seconds, and EU9.0 is one stop lower, i.e. 3200 watt-seconds.

Flash LED illumination

Although they are not yet at the power levels to replace xenon flash devices in still cameras, high-current flash LEDs have recently been used as flash sources in camera phones. The major advantages of LEDs over xenon include low voltage operation, higher efficiency, and extreme miniaturization.

Focal-plane-shutter synchronization

Electronic flash units have compatibility issues with focal-plane shutter
Focal-plane shutter
In camera design, a focal-plane shutter is a type of photographic shutter that is positioned immediately in front of the focal plane of the camera, that is, right in front of the photographic film or image sensor.-Two-curtain shutters:...

s. Focal-plane shutters expose using two curtains that cross the sensor. The first one opens and the second curtain follows it after a delay equal to the nominal shutter speed. A typical modern focal-plane shutter takes about 1/200s to cross the sensor, so at exposure times shorter than this only part of the sensor is uncovered at any one time. Electronic flash can have durations as short as 50 µs, so at such short exposure times only part of the sensor is exposed. This limits the shutter speed to about 1/200s when using flash. In the past, slow-burning single-use flash bulbs allowed the use of focal-plane shutters at maximum speed because they produced continuous light for the time taken for the exposing slit to cross the film gate. If these are found they cannot be used on modern cameras because the bulb must be fired *before* the first shutter curtain begins to move (M-sync); the X-sync used for electronic flash normally fires only when the first shutter curtain reaches the end of its travel.

High-end flash units address this problem by offering a mode, typically called FP sync
Flash synchronization
In a camera, flash synchronization is defined as the firing of a photographic flash coinciding with the shutter admitting light to photographic film or electronic image sensor. It is often shortened to flash sync or flash synch....

 or HSS (High Speed Sync
Flash synchronization
In a camera, flash synchronization is defined as the firing of a photographic flash coinciding with the shutter admitting light to photographic film or electronic image sensor. It is often shortened to flash sync or flash synch....

), which fires the flash tube multiple times during the time the slit traverses the sensor. Such units require communication with the camera and are thus dedicated to a particular camera make. The multiple flashes result in a significant decrease in guide number, since each is only a part of the total flash power, but it's all that illuminates any particular part of the sensor. In general, if s is the shutter speed, and t is the shutter traverse time, the guide number reduces by . For example, if the guide number is 100, and the shutter traverse time is 5 ms (a shutter speed of 1/200s), and the shutter speed is set to 1/2000s (0.5 ms), the guide number reduces by a factor of , or about 3.16, so the resultant guide number at this speed would be about 32.

Current (2010) flash units frequently have much lower guide numbers in HSS mode than in normal modes, even at speeds below the shutter traverse time. For example, the Mecablitz 58 AF-1 digital flash unit has a guide number of 58 in normal operation, but only 20 in HSS mode, even at low speeds.

Technique

As well as dedicated studio use, flash may be used as the main light source where ambient light is inadequate, or as a supplementary source in more complex lighting situations. Basic flash lighting produces a hard, frontal light unless modified in some way. Umbrellas and softboxes are commonly used for this purpose (even with small hand-held flash units).

Fill flash
Fill flash
Fill flash is a photographic technique used to brighten deep shadow areas, typically outdoors on sunny days, though the technique is useful any time the background is significantly brighter than the subject of the photograph, particularly in backlit subjects...

 or "fill-in flash" describes flash used to supplement ambient light in order to illuminate a subject close to the camera that would otherwise be in shade relative to the rest of the scene. The flash unit is set to expose the subject correctly at a given aperture, while shutter speed is calculated to correctly expose for the background or ambient light at that aperture setting.

Bounce flash is a related technique in which flash is directed onto a reflective surface, for example a white ceiling or a flash umbrella
Reflector (photography)
In photography and cinematography, a reflector is an improvised or specialised reflective surface used to redirect light towards a given subject or scene.- Types :...

, which then reflects light onto the subject. It can be used as fill-flash or, if used indoors, as ambient lighting for the whole scene. Bouncing creates softer, less artificial-looking illumination than direct flash, often reducing overall contrast and expanding shadow and highlight detail, and typically requires more flash power than direct lighting.

Part of the bounced light can be also aimed directly on the subject by "bounce cards" attached to the flash unit which increase the efficiency of the flash and illuminate shadows cast by light coming from the ceiling. It's also possible to use one's own palm for that purpose, resulting in warmer tones on the picture, as well as eliminating the need to carry additional accessories.

Also, slave flash units exist that are set up away from the subject and camera, that are triggered by the light from the master flash. This slave flash provides fill or bounce light. Many small flashes and studio monolights have optical slaves built in. Wireless radio transmitters, such as PocketWizards
PocketWizard
The PocketWizard is a wireless radio triggering system for off-camera lighting developed in the late 1990s, by LPA Design. It requires a transmitter electrically connected to the camera, usually mounted on the camera's hot shoe to trigger a remote receiver connected to a remote flash unit via a PC...

 are also popular for remote synchronization since the receiver unit can be around a corner, or well over 100 meters away (which would be far too difficult to trigger using an optical sync).

Another method that can be used is strobe. Some high end units can be set to flash a specified number of times at a specified frequency. This allows action to be frozen multiple times in a single exposure.

Colored gels can also be used to change the color of the flash. Correction gels are commonly used, so that the light of the flash would be the same as the tungsten lights (using a CTO gel) or the fluorescent lights.

Drawbacks

  • Using on-camera flash will give a very harsh light, which results in a loss of shadows in the image, because the only lightsource is in practically the same place as the camera. Balancing the flash power and ambient lighting or using off-camera flash can help overcome these issues. Using an umbrella or softbox (the flash will have to be off-camera for this) makes softer shadows.
  • A typical problem with cameras using built-in flash units is the low intensity of the flash; the level of light produced will often not suffice for good pictures at distances of over 3 meters (10 ft) or so. Dark, murky pictures with excessive image noise
    Image noise
    Image noise is random variation of brightness or color information in images, and is usually an aspect of electronic noise. It can be produced by the sensor and circuitry of a scanner or digital camera...

     or "grain" will result. In order to get good flash pictures with simple cameras, it is important not to exceed the recommended distance for flash pictures. Larger flashes, especially studio units and monoblocks, have sufficient power for larger distances, even through an umbrella, and can even be used against sunlight, at short distances.
  • The "Red-eye effect
    Red-eye effect
    The red-eye effect in photography is the common appearance of red pupils in color photographs of eyes. It occurs when using a photographic flash very close to the camera lens , in ambient low light. The effect appears in the eyes of humans and animals that have no tapetum lucidum, hence no...

    " is another problem with on camera and ring flash units. Since the retina
    Retina
    The vertebrate retina is a light-sensitive tissue lining the inner surface of the eye. The optics of the eye create an image of the visual world on the retina, which serves much the same function as the film in a camera. Light striking the retina initiates a cascade of chemical and electrical...

     of the human eye
    Human eye
    The human eye is an organ which reacts to light for several purposes. As a conscious sense organ, the eye allows vision. Rod and cone cells in the retina allow conscious light perception and vision including color differentiation and the perception of depth...

     reflects red light straight back in the direction it came from, pictures taken from straight in front of a face often exhibit this effect. It can be somewhat reduced by using the "red eye reduction" found on many cameras (a pre-flash that makes the subject's iris
    Iris (anatomy)
    The iris is a thin, circular structure in the eye, responsible for controlling the diameter and size of the pupils and thus the amount of light reaching the retina. "Eye color" is the color of the iris, which can be green, blue, or brown. In some cases it can be hazel , grey, violet, or even pink...

    es contract). However, very good results can be obtained only with a flash unit that is separated from the camera, sufficiently far from the optical axis
    Optical axis
    An optical axis is a line along which there is some degree of rotational symmetry in an optical system such as a camera lens or microscope.The optical axis is an imaginary line that defines the path along which light propagates through the system...

    , or by using bounce flash, where the flash head is angled to bounce light off a wall, ceiling or reflector.
  • On some cameras the flash exposure measuring logic fires a pre-flash very quickly before the real flash. In some camera/people combinations this will lead to shut eyes in every picture taken. The blink response time seems to be around 1/10 of a second. If the exposure flash is fired at approximately this interval after the TTL measuring flash, people will be squinting or have their eyes shut. One solution may be the FEL (flash exposure lock) offered on some more expensive cameras, which allows the photographer to fire the measuring flash at some earlier time, long (many seconds) before taking the real picture. Unfortunately many camera manufacturers do not make the TTL pre-flash interval configurable.
  • Flash distracts people, limiting the number of pictures that can be taken without irritating them.
  • Photographing with flash may not be permitted in some museums even after purchasing a permit for taking pictures.
  • Flash equipment may take some time to setup, and like any grip
    Grip (job)
    In the U.S. and Canada, grips are lighting and rigging technicians in the filmmaking and video production industries. They constitute their own department on a film set and are directed by a key grip. Grips have two main functions...

     equipment, may need to be carefully secured, especially if hanging overhead so it does not fall on anyone. A small breeze can easily topple a flash with an umbrella on a lightstand if it is not tied down or sandbagged. Larger equipment (e.g. monoblocks) will need a supply of A.C. power.

See also

  • BC Flash
    BC Flash
    BC Flash was a flash photography system used with flashbulbs. Instead of relying directly on the current pulse ability of a battery to directly fire a flashbulb, a battery was used to charge a capacitor that would then discharge through the flashbulb...

  • Guide number
    Guide number
    The guide number for an electronic flash measures its ability to illuminate the subject to be photographed at a specific film or sensor sensitivity and angle of view...

  • Flash synchronization
    Flash synchronization
    In a camera, flash synchronization is defined as the firing of a photographic flash coinciding with the shutter admitting light to photographic film or electronic image sensor. It is often shortened to flash sync or flash synch....

  • Inverse-square law
    Inverse-square law
    In physics, an inverse-square law is any physical law stating that a specified physical quantity or strength is inversely proportional to the square of the distance from the source of that physical quantity....

  • List of photographic equipment makers
  • Ring flash
    Ring flash
    A ring flash, invented by Lester A. Dine in 1952, originally for use in dental photography, is a circular photographic flash that fits around the lens, especially for use in macro photography...

  • Flash Comparison
    Flash Comparison
    A list of flash guns, for easy comparison of strobes, from different manufactures. The list is intended to supplement the list of photographic equipment makers.-List of current models:-List of discontinued models:...

  • Flash-lamp
    Flash-lamp
    The electric flash-lamp is a device that uses an electrical circuit to trigger a fuse to ignite explosive powder for a brief sudden burst of bright light from a chemical reaction of flash powder burning...

  • Through-the-lens metering
    Through-the-lens metering
    Through-the-lens metering is a photographic term describing a feature of cameras capable of measuring light levels in a scene through their taking lenses, as opposed to a separate metering window...


External links

The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK