Climbing equipment
Encyclopedia
A wide range of equipment
is used during rock climbing
. The most popular types of climbing equipment are briefly described in this article. The article on protecting a climb
describes equipment commonly used to protect a climber against the consequences of a fall.
See also the Glossary of climbing terms
for more equipment descriptions.
construction, consisting of a core (kern) of long twisted fibres and an outer sheath (mantle) of woven coloured fibres. The core provides about 80% of the tensile strength
, while the sheath is a durable layer that protects the core and gives the rope desirable handling characteristics.
Ropes used for climbing can be divided into two classes: dynamic ropes and low elongation ropes (sometimes called "static" ropes). Dynamic ropes are designed to absorb the energy of a falling climber, and are usually used as Belaying ropes. When a climber falls, the rope stretches, reducing the maximum force experienced by the climber, their belayer, and equipment. Low elongation ropes stretch much less, and are usually used in anchoring
systems. They are also used for abseiling (rappeling) and as fixed rope
s climbed with ascenders.
Modern webbing is often made from dyneema, which is usually stronger and lighter than nylon. While 12 mm dyneema slings have a tensile strength of around 22 kN, a one-inch (25-mm) tubular climb-spec nylon webbing has a tensile strength of about 20 kN (4000 pounds
). Some webbing is tubular or hollow core and is advantageous because rope can be placed inside of it, preventing damage to the sheath of a kernmantle rope if it hangs over a sharp edge. Webbing is inexpensive when compared with climbing rope.
When webbing is sewn together at the ends (using reinforced stitching), it becomes known as a sling or runner, and if you clip a carabiner to each end of the sling, you have a quickdraw
. Webbing has many uses such as extending the distance between protection
and a tie-in point, an anchor
extension or equalization, securely anchoring a belayer (typically when the climber is heavier than the belayer), creating makeshift harnesses
, carrying equipment, and as a component of quickdraws.
Webbing is usually tied (using a water knot
or beer knot
).
Carabiners exist in various forms; the shape of the carabiner and the type of gate varies according to the use for which it is intended. There are two major varieties: locking and non-locking carabiners. Locking carabiners offer a method of preventing the gate from opening when in use. Locking carabiners are used for important connections, such as at the anchor point or a belay device. There are several different types of locking carabiners, including a twist-lock and a thread-lock. Non-locking carabiners are commonly found as a component of quickdraws.
Carabiners are made with many different types of gates including wire-gate, bent-gate, and straight-gate. The different gates have different strengths and uses. Most locking carabiners utilize a straight-gate. Bent-gate and wire-gate carabiners are usually found on the rope-end of quickdraws, as they facilitate easier rope clipping than straight-gate carabiners.
Carabiners are also known by many slang names including biner .
Quickdraws (often referred to as "draws") are used by climbers to connect ropes to bolt anchors, or to other traditional protection, allowing the rope to move through the anchoring system with minimal friction. A quickdraw consists of two non-locking carabiners connected together by a short, pre-sewn loop of webbing. Alternatively, and quite regularly, the pre-sewn webbing is replaced by a sling of the above-mentioned dyneema/nylon webbing. This is usually of a 60 cm loop and can be tripled over between the carabiners to form a 20 cm loop. Then when more length is needed the sling can be reverted back into a 60 cm loop offering more versatility than a pre-sewn loop. Carabiners used for clipping into the protection generally has a straight gate, decreasing the possibility of the carabiner accidentally unclipping from the protection. The carabiner into which the rope is clipped often has a bent gate, so that clipping the rope into this carabiner can be done quickly and easily.
Different types of climbing warrant particular features for harnesses. Sport climbers
typically use minimalistic harnesses, some with sewn-on gear loops. Alpine climbers often choose lightweight harnesses, perhaps with detachable leg loops. Big Wall
climbers generally prefer padded waist belts and leg loops. There are also full body harnesses for children, whose pelvises may be too narrow to support a standard harness safely. These harnesses prevent children from falling even when inverted, and are either manufactured for children or constructed out of webbing. Some climbers use full body harnesses when there is a chance of inverting, or when carrying a heavy bag. There are also chest harnesses, which are used only in combination with a sit harness; this combination provides the same advantages as a full body harness. However, test results from UIAA show that chest harnesses can put more impact on the neck than sit harnesses, making them slightly more dangerous to use.
Apart from these harnesses, there are also caving and canyoning harnesses, which all serve different purposes. For example, a caving harness is made of tough waterproof and unpadded material, with dual attachment points. Releasing the maillon
from these attachment points loosens the harness quickly.
Canyoning harnesses are somewhat like climbing harnesses, often without the padding, but with a seat protector, making it more comfortable to rappel. These usually have a single attachment point of Dyneema.
Belay devices are mechanical friction brake devices used when belaying. They allow control of the belay rope while their main purpose is to allow locking off of the rope with minimal effort. Multiple kinds of belay devices exist, and some of which may additionally be used as descenders, for controlled descent on a rope, that is, abseiling or rappeling.
Belay devices include both passive and active belay devices. Passive belay devices rely on the brake hand and a carabiner to lock off the rope. Sticht plates and the Air Traffic Controller ATC are examples of passive belay devices.
Active belay devices have a built-in mechanism that locks off the rope without the help of any other pieces of equipment. A GriGri is an example. The offset cam in the GriGri locks off the rope automatically to catch a falling climber, much like a seatbelt in a car locks off to hold a passenger securely.
However, a GriGri, with its technology, often makes belayers become less vigilant. The GriGri is not a hands-free belay device. One mistake with the GriGri is reverse threading it. Reverse threading means to thread the GriGri the wrong way around, rendering the camming action useless. However, in a fall, with a reverse threaded GriGri, bending the rope sharply under the GriGri provides more than enough friction to hold a falling climber as long as the belay locks off the rope as they would with a tube style device.
An example of traditional belay is the Body Belay or the Hip Belay, where the rope is wrapped around the body to provide enough friction to catch a climber. This is often used in Alpine climbing where efficiency is important.
s can be used as descenders, but there are descenders that are not practical for belaying, since it is too difficult to feed rope through them, or because they do not provide sufficient friction to hold a hard fall.
It is an aluminium (or occasionally steel) "8" shaped device, but comes in several varieties. Its main advantage is efficient heat dissipation. A square eight, used in rescue applications, is better for rappelling than the traditional 8.
Figure eights allow fast but controlled descent on a rope. They are easy to set up and are effective in dissipating the heat caused by friction but have a tendency to put a twist in the rope. Holding the brake hand off to the side twists the rope, whereas holding the brake hand straight down, parallel to the body, allows a controlled descent without twisting the rope. An 8 descender can wear a rope quicker than a tube style belay/rappel device because of the many bends it puts into the rope. Many sport climbers also avoid them because of the extra bulk an 8 puts on the rack. However, many ice climbers prefer to use the 8, because it is much easier to thread with stiff or frozen rope.
Jumars perform the same functionality as friction knots but less effort is needed to use them. A Jumar employs a cam which allows the device to slide freely in one direction but tightly grip the rope when pulled on in the opposite direction. To prevent a jumar from accidentally coming off the rope, a locking carabiner is used. The Jumar is first attached to the climber's harness by a piece of webbing or sling, and then the Jumar is clipped onto the rope and locked. Two ascenders are normally used to climb a fixed rope. For climbing a fixed rope attached to snow anchors on a steep slope, only one Jumar is used as the other hand is used for holding the ice axe
.
Another type of ascender allows rope to feed in either direction, slowly, but locks up when pulled quickly. Such self-locking device
s allow people to protect solo climbs because the amount of rope is automatically adjusted.
consisting of a tied or sewn loop of webbing
that can be wrapped around sections of rock, hitched (tied) to other pieces of equipment or even tied directly to a tensioned line using a prusik knot, for anchor extension (to reduce rope drag
and for other purposes), equalisation, or climbing the rope.
A daisy chain is a strap, several feet long and typically constructed from one-inch tubular nylon webbing of the same type used in lengthening straps between anchor-points and the main rope. The webbing is bar-tacked (sewn) across at roughly two-inch intervals (or, in the past, tied) to create a length of small loops for attachment. Unlike the use of similar devices in backpacking, daisy chains in technical rock climbing are expected to be of sufficient strength to be "load bearing,". Daisy chain pockets however are not rated to full strength, but can only take static loads.
When clipped in, daisy chains should not be shortened by clipping in another pocket to the same karabiner. Failure of the pocket stitching results in the daisy chain disconnecting from the anchor, with potentially fatal consequences. If shortening the daisy chain when clipped in, in order to eliminate dangerous slack, a second karabiner should be used to connect to the anchor.
Though daisy chains are sometimes used by free climbers as a type of sling
(a quick attachment used from harness directly to a belay anchor), and for ad hoc purposes similar to those of the backpacker, the canonic use for a daisy chain is in aid climbing
, wherein the leader will typically attach one end to the harness, and the other to the top-most anchor placement (by carabiner
or fifi hook
), particularly after having ascended in étriers as high as possible. This allows the leader to hang from the daisy chain while preparing the next anchor placement. The closely spaced loops allow fine-tuning the length from harness to anchor, thereby allowing the best possible reach for the next placement.
Daisy chains should not be confused with étriers, also known as aiders, which are short ladders made in the same way, but with larger loops, also used in aid climbing, nor with load-limiting devices often known as screamers (from their first trade name) designed to simulate a dynamic belay.
term, wires.
These consist of three or four cam
s mounted on a common axle or two adjacent axles, in such a way that pulling on the shaft connected to the axle forces the cams to spread further apart. The SLCD is used like a syringe
, by pulling the cams via a "trigger" (a small handle) which forces them closer, inserting it into a crack or pocket in the rock, and then releasing the trigger. The springs make the cams expand and grip the rock face securely. A climbing rope may then be attached to the end of the stem via a sling
and carabiner
. SLCDs are typically designed to maintain a constant camming angle with the rock to ensure that the normal force provided by the cam lobes against the rock face will supply enough friction to hold a cam in equilibrium with the rock.
(webbing). The block is shaped so that pulling on the tape makes it cam against the crack, gripping the rock tighter. Careful placement is necessary so that the
"cam" does not loosen when not loaded. It is generally not as easy to place or remove as a SLCD but is much cheaper and lighter, and often is the only thing that will work in situations like quarry drill-holes and limestone pockets. The smaller sizes can work well in old piton
scars, and can also be used passively as nuts.
Various items of equipment are employed during climbing-specific training.
s can be performed. When used effectively they can facilitate huge gains in forearm strength and lock off strength, mostly in the Flexor digitorum profundus and flexor digitorum superficialis muscles of the fore arms. They are also an apparatus with the capability to injure the user, usually in the A1-4 pulleys
or along sections of flexor carpi sheath linking the different FDS or FDP sections in the forearm.
Fingerboards are usually mounted above a doorway, or anywhere that allows the user's body to hang freely, one of the best available attachment areas is to roof beams. They are also called hangboards.
Climbers may decide whether to wear a helmet based on a number of factors such as the type of climb being attempted, concerns about weight, reductions in agility, added encumbrances, or simple vanity. Additionally, there is less incentive to wear a helmet in artificial climbing environments like indoor climbing walls (where routes and holds
are regularly maintained) than on natural multi-pitch routes or ice climbing routes (where falling rocks and/or ice are likely).
. To increase the grip of the foot
on a climbing wall
or rock face due to friction
, the shoe is covered with a vulcanized rubber layer. Usually, shoes are only a few millimetres thick and fit very snuggly around the foot. Stiffer shoes are used for "edging", more compliant ones for "smearing". Some have foam padding on the heel to make descents and rappels more comfortable. Climbing shoes can be re-soled which decreases the cost and environmental impact of purchasing new shoes.
Belay gloves have been shunned by climbers who claim that gloves reduce grip on and control over the rope. For other climbers, belay gloves are a useful aid for belaying on long climbs. In particular, when lowering a climber they remove the possibility of rope burn and the subsequent involuntary release of the rope.
Belay gloves are constructed from either leather or a synthetic substitute. They typically have heat resistant padding on the palm and fingers.
It is very important to use gloves if using a classic or body belay. They are also very useful for belaying with single lead ropes that are 9.5mm or smaller.
"Tape" can also refer to nylon webbing.
Haul bags are often affectionately known as "pigs" due to their unwieldy nature.
but often with added magnesium sulfate
which acts as a drying agent.
For environmental reasons, the use of chalk is controversial in some areas. In areas where rain is infrequent (or under overhangs on any cliff) bold and unsightly chalk marks can build up on popular routes. In places where rain is more common, the chalk residue can form thick deposits. As a result, chalk coloured to match various rock types and biodegradable alternatives are now becoming available. Chalk was introduced
into rock climbing in the mid 1950s
These are hand-sized fabric bags for holding climbers' chalk. Chalk bags are usually cylinder- or pouch-shaped and have openings that are controlled by drawstring
s. The inner fabric is usually fleece, which traps chalk powder. The outer fabric may be brightly coloured or patterned. Chalk bags are usually attached to the back of a waist belt for easy access by either hand during a climb.
The powdered chalk may be loose in the bag, or, increasingly, a chalk sock, or chalk ball, is filled with the chalk and this is placed into the chalk bag. Chalk socks are pouches made from a porous sock-like material that allows some chalk dust to be excreted when squeezed or rubbed. They allow just enough chalk to be released while keeping the remainder contained.This prevents the unnecessary scattering of dust that loose chalk often causes.
, or a combination of the two. Climbing-specific nylon webbing is generally tubular webbing, that is, it is a tube of nylon pressed flat. It is very strong, generally rated in excess of 9 kN, or about 2,020 pounds of force. Spectra is even stronger, often rated above 20 kN (about 4,500 lbf or 2000KG) and as high as 27 kN (about 6,070 lbf or 2700 KG).
Generally, webbing is made into loops for use as climbing equipment. Such loops, called runners, slings, or quickdraws, have many uses in climbing, including racking gear, building anchors, extending a piece of protection, or even attaching directly to a rock or a tree for an anchor. These loops are made one of two ways—sewn or tied. Both ways of forming runners have advantages and drawbacks, and it is the individual climber that chooses which to use. Generally speaking, most climbers carry a few of both types. It is also important to note that only nylon can be knotted into a runner. Spectra is always sewn because the fibers are too slippery to hold a knot under weight.
Any products sold in Europe must, by law, be certified to the relevant standards. One of the most important aspects (and obligatory) in the European Union, is that the product carries the CE mark
. Also the name of the manufacturer, the product code and the strength (i.e., on carabiners) must be engraved in the material). There is no such requirement in many other countries, although most manufacturers voluntarily follow UIAA and CEN standards as well as the EU legislation.
Sports equipment
Sports equipment is a general term for any object used for sport or exercise. Examples of sports equipment include:-Exercise equipment:Examples for exercise include swiss balls, weights, equipment for the gym...
is used during rock climbing
Rock climbing
Rock climbing also lightly called 'The Gravity Game', is a sport in which participants climb up, down or across natural rock formations or artificial rock walls. The goal is to reach the summit of a formation or the endpoint of a pre-defined route without falling...
. The most popular types of climbing equipment are briefly described in this article. The article on protecting a climb
Protection (climbing)
To make climbing as safe as possible, most climbers use protection, a term used to describe the equipment used to prevent injury to themselves and others.-Types of climbing:...
describes equipment commonly used to protect a climber against the consequences of a fall.
Glossary of climbing terms
This page describes terms and jargon related to climbing and mountaineering.-A:American death triangle : An anchor which is created by connecting a closed loop of cord or webbing between two points of protection, and then suspending the rope from a carabiner clipped to only one strand of said anchor...
for more equipment descriptions.
Rope, cord and webbing
Climbing ropes are typically of kernmantleKernmantle rope
Kernmantle rope is rope constructed with its interior core protected with a woven exterior sheath that is designed to optimize strength, durability, and flexibility. The core fibers provide the tensile strength of the rope, while the sheath protects the core from abrasion during use...
construction, consisting of a core (kern) of long twisted fibres and an outer sheath (mantle) of woven coloured fibres. The core provides about 80% of the tensile strength
Tensile strength
Ultimate tensile strength , often shortened to tensile strength or ultimate strength, is the maximum stress that a material can withstand while being stretched or pulled before necking, which is when the specimen's cross-section starts to significantly contract...
, while the sheath is a durable layer that protects the core and gives the rope desirable handling characteristics.
Ropes used for climbing can be divided into two classes: dynamic ropes and low elongation ropes (sometimes called "static" ropes). Dynamic ropes are designed to absorb the energy of a falling climber, and are usually used as Belaying ropes. When a climber falls, the rope stretches, reducing the maximum force experienced by the climber, their belayer, and equipment. Low elongation ropes stretch much less, and are usually used in anchoring
Anchor (climbing)
In rock climbing, an anchor can be any way of attaching the climber, the rope, or a load to rock, ice, steep dirt, or a building by either permanent or temporary means...
systems. They are also used for abseiling (rappeling) and as fixed rope
Fixed rope
Fixed rope is the practice of fixing in place bolted ropes to assist climbers and walkers in exposed mountain locations. They are used widely on American and European climbing routes but disdained by purist mountaineers. Many guided expeditions to any of the eight-thousanders normally set up fixed...
s climbed with ascenders.
Modern webbing is often made from dyneema, which is usually stronger and lighter than nylon. While 12 mm dyneema slings have a tensile strength of around 22 kN, a one-inch (25-mm) tubular climb-spec nylon webbing has a tensile strength of about 20 kN (4000 pounds
Pound-force
The pound force is a unit of force in some systems of measurement including English engineering units and British gravitational units.- Definitions :...
). Some webbing is tubular or hollow core and is advantageous because rope can be placed inside of it, preventing damage to the sheath of a kernmantle rope if it hangs over a sharp edge. Webbing is inexpensive when compared with climbing rope.
When webbing is sewn together at the ends (using reinforced stitching), it becomes known as a sling or runner, and if you clip a carabiner to each end of the sling, you have a quickdraw
Quickdraw
Quickdraws are used by rock climbers to connect the climbing rope to bolt anchors or other protection, while lead climbing...
. Webbing has many uses such as extending the distance between protection
Protection (climbing)
To make climbing as safe as possible, most climbers use protection, a term used to describe the equipment used to prevent injury to themselves and others.-Types of climbing:...
and a tie-in point, an anchor
Anchor (climbing)
In rock climbing, an anchor can be any way of attaching the climber, the rope, or a load to rock, ice, steep dirt, or a building by either permanent or temporary means...
extension or equalization, securely anchoring a belayer (typically when the climber is heavier than the belayer), creating makeshift harnesses
Climbing harness
A climbing harness is a piece of equipment used in certain types of rock-climbing, abseiling or other activities requiring the use of ropes to provide access or safety...
, carrying equipment, and as a component of quickdraws.
Webbing is usually tied (using a water knot
Water knot
The water knot is a knot frequently used in climbing for joining two ends of webbing together, for instance when making a sling.-Tying the water knot:...
or beer knot
Beer knot
A beer knot is a bend used in tubular webbing. Its most common application is in slings used in rock climbing. Compared to the water knot, it has the advantages of a higher strength...
).
Carabiners
Carabiners are metal loops with spring-loaded gates (openings), used as connectors. Once made primarily from steel, almost all carabiners for recreational climbing are made from a light weight aluminum alloy. Steel carabiners are harder wearing, but much heavier and often used by instructors when working with groups.Carabiners exist in various forms; the shape of the carabiner and the type of gate varies according to the use for which it is intended. There are two major varieties: locking and non-locking carabiners. Locking carabiners offer a method of preventing the gate from opening when in use. Locking carabiners are used for important connections, such as at the anchor point or a belay device. There are several different types of locking carabiners, including a twist-lock and a thread-lock. Non-locking carabiners are commonly found as a component of quickdraws.
Carabiners are made with many different types of gates including wire-gate, bent-gate, and straight-gate. The different gates have different strengths and uses. Most locking carabiners utilize a straight-gate. Bent-gate and wire-gate carabiners are usually found on the rope-end of quickdraws, as they facilitate easier rope clipping than straight-gate carabiners.
Carabiners are also known by many slang names including biner .
Quickdraws
Quickdraws (often referred to as "draws") are used by climbers to connect ropes to bolt anchors, or to other traditional protection, allowing the rope to move through the anchoring system with minimal friction. A quickdraw consists of two non-locking carabiners connected together by a short, pre-sewn loop of webbing. Alternatively, and quite regularly, the pre-sewn webbing is replaced by a sling of the above-mentioned dyneema/nylon webbing. This is usually of a 60 cm loop and can be tripled over between the carabiners to form a 20 cm loop. Then when more length is needed the sling can be reverted back into a 60 cm loop offering more versatility than a pre-sewn loop. Carabiners used for clipping into the protection generally has a straight gate, decreasing the possibility of the carabiner accidentally unclipping from the protection. The carabiner into which the rope is clipped often has a bent gate, so that clipping the rope into this carabiner can be done quickly and easily.
Harnesses
A harness is a system used for connecting the rope to the climber. Most harnesses used in climbing are preconstructed and are worn around the pelvis and hips, although other types are used occasionally.Different types of climbing warrant particular features for harnesses. Sport climbers
Sport climbing
Sport climbing is a form of rock climbing that relies on permanent anchors fixed to the rock, and possibly bolts, for protection,...
typically use minimalistic harnesses, some with sewn-on gear loops. Alpine climbers often choose lightweight harnesses, perhaps with detachable leg loops. Big Wall
Big wall climbing
Big wall climbing is a type of rock climbing in which a long multi-pitch route, so sustained that an ascent normally requires more than a single day, is climbed. Big wall routes require the climbing team to live on the route often using portaledges and hauling equipment...
climbers generally prefer padded waist belts and leg loops. There are also full body harnesses for children, whose pelvises may be too narrow to support a standard harness safely. These harnesses prevent children from falling even when inverted, and are either manufactured for children or constructed out of webbing. Some climbers use full body harnesses when there is a chance of inverting, or when carrying a heavy bag. There are also chest harnesses, which are used only in combination with a sit harness; this combination provides the same advantages as a full body harness. However, test results from UIAA show that chest harnesses can put more impact on the neck than sit harnesses, making them slightly more dangerous to use.
Apart from these harnesses, there are also caving and canyoning harnesses, which all serve different purposes. For example, a caving harness is made of tough waterproof and unpadded material, with dual attachment points. Releasing the maillon
Maillon
A maillon, maillon rapide or quick link is a metal link, similar to a carabiner. Maillons have a threaded sleeve which tightens over a thread, as opposed to a hinged gate like a carabiner, making them stronger, but more difficult to use. Like carabiners, maillons are available in a range of shapes...
from these attachment points loosens the harness quickly.
Canyoning harnesses are somewhat like climbing harnesses, often without the padding, but with a seat protector, making it more comfortable to rappel. These usually have a single attachment point of Dyneema.
Belay devices
Belay devices are mechanical friction brake devices used when belaying. They allow control of the belay rope while their main purpose is to allow locking off of the rope with minimal effort. Multiple kinds of belay devices exist, and some of which may additionally be used as descenders, for controlled descent on a rope, that is, abseiling or rappeling.
Belay devices include both passive and active belay devices. Passive belay devices rely on the brake hand and a carabiner to lock off the rope. Sticht plates and the Air Traffic Controller ATC are examples of passive belay devices.
Active belay devices have a built-in mechanism that locks off the rope without the help of any other pieces of equipment. A GriGri is an example. The offset cam in the GriGri locks off the rope automatically to catch a falling climber, much like a seatbelt in a car locks off to hold a passenger securely.
However, a GriGri, with its technology, often makes belayers become less vigilant. The GriGri is not a hands-free belay device. One mistake with the GriGri is reverse threading it. Reverse threading means to thread the GriGri the wrong way around, rendering the camming action useless. However, in a fall, with a reverse threaded GriGri, bending the rope sharply under the GriGri provides more than enough friction to hold a falling climber as long as the belay locks off the rope as they would with a tube style device.
An example of traditional belay is the Body Belay or the Hip Belay, where the rope is wrapped around the body to provide enough friction to catch a climber. This is often used in Alpine climbing where efficiency is important.
Rappel devices (descenders)
These devices are friction brakes which are designed for descending ropes. Many belay deviceBelay device
Belay devices are mechanical pieces of climbing equipment used to control a rope during belaying. They are designed to improve belay safety for the climber by allowing the belayer to manage their duties with minimal physical effort. With the right belay device, a small, weak climber can easily...
s can be used as descenders, but there are descenders that are not practical for belaying, since it is too difficult to feed rope through them, or because they do not provide sufficient friction to hold a hard fall.
Figure eight
Sometimes just called "eight", this device is most commonly used as a descender, but may also be used as a belay device in the absence of more appropriate equipment, although it does not provide enough holding power for this to be recommended.It is an aluminium (or occasionally steel) "8" shaped device, but comes in several varieties. Its main advantage is efficient heat dissipation. A square eight, used in rescue applications, is better for rappelling than the traditional 8.
Rescue eight
A rescue eight is a variation of a figure eight, with "ears" or "wings" which prevent the rope from "locking up" or creating a larks head or girth hitch, thus stranding the rappeller on the rope. Rescue eights are frequently made of steel, rather than aluminum.Rappel Rack
This consists of a 'U' shaped frame, attached to the rappeller's harness, into which snap multiple bars that pivot from the other side of the frame. The rope is woven through as many of the bars as are required to provide sufficient friction. This arrangement allows for variations in rope diameter and condition, as well as controlled rate of descent. Racks are seldom used in sport climbing. Cavers often use racks on long rappels because friction can be adjusted by adding or removing bars.Ascenders
Ascenders are mechanical devices for ascending on a rope. They are also called Jumars, after a popular brand.Jumars perform the same functionality as friction knots but less effort is needed to use them. A Jumar employs a cam which allows the device to slide freely in one direction but tightly grip the rope when pulled on in the opposite direction. To prevent a jumar from accidentally coming off the rope, a locking carabiner is used. The Jumar is first attached to the climber's harness by a piece of webbing or sling, and then the Jumar is clipped onto the rope and locked. Two ascenders are normally used to climb a fixed rope. For climbing a fixed rope attached to snow anchors on a steep slope, only one Jumar is used as the other hand is used for holding the ice axe
Ice axe
An ice axe, is a multi-purpose ice and snow tool used by mountaineers both in the ascent and descent of routes which involve frozen conditions. It can be held and employed in a number of different ways, depending on the terrain encountered...
.
Another type of ascender allows rope to feed in either direction, slowly, but locks up when pulled quickly. Such self-locking device
Self-locking device
Self-locking devices are devices intended to arrest the fall of solo climbers who climb without partners. This device is used for back rope solo climbing for 'ground-up climbing' or 'top rope self belaying'. To date, several types of such self-locking devices have evolved.-Prusik sling:The earliest...
s allow people to protect solo climbs because the amount of rope is automatically adjusted.
Slings
A sling or runner is an item of climbing equipmentClimbing equipment
A wide range of equipment is used during rock climbing. The most popular types of climbing equipment are briefly described in this article. The article on protecting a climb describes equipment commonly used to protect a climber against the consequences of a fall....
consisting of a tied or sewn loop of webbing
Webbing
Webbing is a strong fabric woven as a flat strip or tube of varying width and fibres often used in place of rope. The name webbing comes from the meshed material frequently used in its construction, which resembles a web...
that can be wrapped around sections of rock, hitched (tied) to other pieces of equipment or even tied directly to a tensioned line using a prusik knot, for anchor extension (to reduce rope drag
Rope drag
In rock climbing, rope drag is the friction of the rope plus its weight that the climber feels when pulling a rope through a number of protection points, or over rock prominences...
and for other purposes), equalisation, or climbing the rope.
Daisy chain
When clipped in, daisy chains should not be shortened by clipping in another pocket to the same karabiner. Failure of the pocket stitching results in the daisy chain disconnecting from the anchor, with potentially fatal consequences. If shortening the daisy chain when clipped in, in order to eliminate dangerous slack, a second karabiner should be used to connect to the anchor.
Though daisy chains are sometimes used by free climbers as a type of sling
Sling
The word sling may refer to:* Sling , a device used to hurl projectiles* Sling is an item of climbing equipment consisting of a sewn loop of webbing that can be wrapped around sections of rock or tied to other pieces of equipment.* Sling * Ski jumping sling is an item of sports training...
(a quick attachment used from harness directly to a belay anchor), and for ad hoc purposes similar to those of the backpacker, the canonic use for a daisy chain is in aid climbing
Aid climbing
Aid climbing is a style of climbing in which standing on or pulling oneself up via devices attached to fixed or placed protection is used to make upward progress....
, wherein the leader will typically attach one end to the harness, and the other to the top-most anchor placement (by carabiner
Carabiner
A carabiner or karabiner is a metal loop with a sprung or screwed gate that is used to quickly and reversibly connect components in safety-critical systems. The word comes from "Karabinerhaken", meaning "hook for a carbine" in German.-Use:...
or fifi hook
Fifi hook
The fifi hook is a piece of equipment used in aid climbing. It is used quickly to connect oneself to gear and so provide a third hand. The fifi can also be useful for technical climbing, alpinism and mixed climbing.-The Fifi:...
), particularly after having ascended in étriers as high as possible. This allows the leader to hang from the daisy chain while preparing the next anchor placement. The closely spaced loops allow fine-tuning the length from harness to anchor, thereby allowing the best possible reach for the next placement.
Daisy chains should not be confused with étriers, also known as aiders, which are short ladders made in the same way, but with larger loops, also used in aid climbing, nor with load-limiting devices often known as screamers (from their first trade name) designed to simulate a dynamic belay.
Protection devices
Protection devices, collectively known as rock protection or pro, provide the means to place temporary anchor points on the rock. These devices may be categorized as passive (e.g., nuts, Hexentrics, etc.) or active (e.g., SLCDs and some uses of tricams). Passive protection acts "merely" as a chock when pulled on, and constrictions in the rock prevent it from pulling out. Active protection transforms a pull on the device into an outward pressure on the rock that helps the device set more firmly. The type of protection that is most appropriate varies depending on the nature of the rock.Nuts
Nuts are manufactured in many different varieties. In their simplest form, they are just a small block of metal attached to a loop of cord or wire. They are used by simply wedging them into narrowing cracks in the rock, then giving them a tug to set them. Nuts are sometimes referred to by the slangSlang
Slang is the use of informal words and expressions that are not considered standard in the speaker's language or dialect but are considered more acceptable when used socially. Slang is often to be found in areas of the lexicon that refer to things considered taboo...
term, wires.
Hexes
Hexes are related to nuts, and consist of a hollow eccentric hexagonal prism with tapered ends, usually threaded with cord or webbing. They are manufactured by several firms, with a range of sizes varying from about 10mm thick to 100mm wide. Sides may be straight or curved.Spring-loaded camming devices
These consist of three or four cam
Cam
A cam is a rotating or sliding piece in a mechanical linkage used especially in transforming rotary motion into linear motion or vice-versa. It is often a part of a rotating wheel or shaft that strikes a lever at one or more points on its circular path...
s mounted on a common axle or two adjacent axles, in such a way that pulling on the shaft connected to the axle forces the cams to spread further apart. The SLCD is used like a syringe
Syringe
A syringe is a simple pump consisting of a plunger that fits tightly in a tube. The plunger can be pulled and pushed along inside a cylindrical tube , allowing the syringe to take in and expel a liquid or gas through an orifice at the open end of the tube...
, by pulling the cams via a "trigger" (a small handle) which forces them closer, inserting it into a crack or pocket in the rock, and then releasing the trigger. The springs make the cams expand and grip the rock face securely. A climbing rope may then be attached to the end of the stem via a sling
Sling (climbing equipment)
A sling or runner is an item of climbing equipment consisting of a tied or sewn loop of webbing that can be wrapped around sections of rock, hitched to other pieces of equipment or tied directly to a tensioned line using a prusik knot; for anchor extension , equalization, or climbing the...
and carabiner
Carabiner
A carabiner or karabiner is a metal loop with a sprung or screwed gate that is used to quickly and reversibly connect components in safety-critical systems. The word comes from "Karabinerhaken", meaning "hook for a carbine" in German.-Use:...
. SLCDs are typically designed to maintain a constant camming angle with the rock to ensure that the normal force provided by the cam lobes against the rock face will supply enough friction to hold a cam in equilibrium with the rock.
Tricams
A Tricam is a device that can be used as either active or passive protection. It consists of a shaped aluminium block attached to a length of tapeSling (climbing equipment)
A sling or runner is an item of climbing equipment consisting of a tied or sewn loop of webbing that can be wrapped around sections of rock, hitched to other pieces of equipment or tied directly to a tensioned line using a prusik knot; for anchor extension , equalization, or climbing the...
(webbing). The block is shaped so that pulling on the tape makes it cam against the crack, gripping the rock tighter. Careful placement is necessary so that the
"cam" does not loosen when not loaded. It is generally not as easy to place or remove as a SLCD but is much cheaper and lighter, and often is the only thing that will work in situations like quarry drill-holes and limestone pockets. The smaller sizes can work well in old piton
Piton
In climbing, a piton is a metal spike that is driven into a crack or seam in the rock with a hammer, and which acts as an anchor to protect the climber against the consequences of a fall, or to assist progress in aid climbing...
scars, and can also be used passively as nuts.
Training equipment
Various items of equipment are employed during climbing-specific training.
Grip savers
A small device that can help in developing the antagonist muscles to those used while gripping with the hand. Use of such a device can prevent the ligament injuries that are frequently experienced by climbers.Fingerboards
A wooden or resin apparatus chiefly used for improving grip strength and practicing grip techniques. They generally consist of a variety of different-sized pockets and ridges that one may hang from, or upon which pull-upPull-up (exercise)
A pull-up is an upper body compound pulling exercise where the body is suspended by the arms, gripping something, and pulled up with muscular effort...
s can be performed. When used effectively they can facilitate huge gains in forearm strength and lock off strength, mostly in the Flexor digitorum profundus and flexor digitorum superficialis muscles of the fore arms. They are also an apparatus with the capability to injure the user, usually in the A1-4 pulleys
Annular ligaments of fingers
In human anatomy, the annular ligaments of the fingers, often referred to as A pulleys and less frequently vaginal ligaments, are the annular part of the fibrous sheathes of the fingers....
or along sections of flexor carpi sheath linking the different FDS or FDP sections in the forearm.
Fingerboards are usually mounted above a doorway, or anywhere that allows the user's body to hang freely, one of the best available attachment areas is to roof beams. They are also called hangboards.
Campus boards
A series of horizontal rungs attached to an overhanging surface that may be climbed up and down without the aid of the feet. When used properly, campus boards can improve finger strength and so-called "contact strength".Bachar ladder
A ladder made by stringing large diameter PVC piping on webbing and climbed without using the feet. Improves overall upper body strength as well as core strength when used well.Specialised clothing
In the early days of climbing, many would have considered specialised clothing to be cheating. In fact, the first climbers considered an untucked shirt or unbuttoned sport jacket a sign of weakness. Several climbers even chose to climb bare foot, an act that modern climbers would find amazing. In the 80s and early 90s, the trend was to wear tight, brightly-colored clothes. The trend, now, is to wear looser fitting clothing.Helmet
The climbing helmet is a piece of safety equipment that primarily protects the skull against falling debris (such as rocks or dropped pieces of protection) and impact forces during a fall. For example, if a lead climber allows the rope to wrap behind an ankle, a fall can flip the climber over and consequently impact the back of the head. Furthermore, any effects of pendulum from a fall that have not been compensated for by the belayer may also result in head injury to the climber. The risk of head injury to a falling climber can be further significantly mitigated by falling correctly.Climbers may decide whether to wear a helmet based on a number of factors such as the type of climb being attempted, concerns about weight, reductions in agility, added encumbrances, or simple vanity. Additionally, there is less incentive to wear a helmet in artificial climbing environments like indoor climbing walls (where routes and holds
Climbing hold
A climbing hold is a shaped grip that is usually attached to a climbing wall so climbers can grab or step on it. On most walls, climbing holds are arranged in paths, called routes, by specially trained route setters. Climbing holds come in a large array of sizes and shapes to provide different...
are regularly maintained) than on natural multi-pitch routes or ice climbing routes (where falling rocks and/or ice are likely).
Climbing shoes
Specifically designed foot wear is usually worn for climbingClimbing
Climbing is the activity of using one's hands and feet to ascend a steep object. It is done both for recreation and professionally, as part of activities such as maintenance of a structure, or military operations.Climbing activities include:* Bouldering: Ascending boulders or small...
. To increase the grip of the foot
Foot
The foot is an anatomical structure found in many vertebrates. It is the terminal portion of a limb which bears weight and allows locomotion. In many animals with feet, the foot is a separate organ at the terminal part of the leg made up of one or more segments or bones, generally including claws...
on a climbing wall
Climbing wall
A climbing wall is an artificially constructed wall with grips for hands and feet, usually used for indoor climbing, but sometimes located outdoors as well. Some are brick or wooden constructions, but on most modern walls, the material most often used is a thick multiplex board with holes drilled...
or rock face due to friction
Friction
Friction is the force resisting the relative motion of solid surfaces, fluid layers, and/or material elements sliding against each other. There are several types of friction:...
, the shoe is covered with a vulcanized rubber layer. Usually, shoes are only a few millimetres thick and fit very snuggly around the foot. Stiffer shoes are used for "edging", more compliant ones for "smearing". Some have foam padding on the heel to make descents and rappels more comfortable. Climbing shoes can be re-soled which decreases the cost and environmental impact of purchasing new shoes.
Belay gloves
Belay gloves are constructed from either leather or a synthetic substitute. They typically have heat resistant padding on the palm and fingers.
It is very important to use gloves if using a classic or body belay. They are also very useful for belaying with single lead ropes that are 9.5mm or smaller.
Tape
Medical tape is useful to both prevent and repair minor injuries. For example, tape is often used to fix flappers. Many climbers use tape to bind fingers or wrists to prevent recurring tendon problems. Tape is also highly desirable for protecting hands on climbing routes that consist mostly of repeated hand jamming."Tape" can also refer to nylon webbing.
Haul bag
A haul bag refers to a large, tough, and often unwieldy bag into which supplies and climbing equipment may be thrown. A rucksack or day pack often has a webbing haul loop on the top edge.Haul bags are often affectionately known as "pigs" due to their unwieldy nature.
Gear sling
A gear sling is usually used by trad (traditional), or big wall climbers when they have too much gear to fit onto the gear loops of their harnesses. The simplest forms are homemade slings of webbing; more elaborate forms have padding and two slings on each side.Bouldering mat
A bouldering mat is a thick mat used to soften landings or to cover objects that would be hazardous in the event of a fall. They typically consist of a 2–6 in (50.8–152.4 mm) foam section covered with a robust fabric covering. Many brands have integral handles and may easily fold into a reasonable dimension for carrying. Bouldering mats are also known by the terms crash pad and sketch pad.Chalk
Gymnastic chalk is a powder that improves grip by absorbing sweat. It is primarily magnesium carbonateMagnesium carbonate
Magnesium carbonate, MgCO3, is a white solid that occurs in nature as a mineral. Several hydrated and basic forms of magnesium carbonate also exist as minerals...
but often with added magnesium sulfate
Magnesium sulfate
Magnesium sulfate is a chemical compound containing magnesium, sulfur and oxygen, with the formula MgSO4. It is often encountered as the heptahydrate epsomite , commonly called Epsom salt, from the town of Epsom in Surrey, England, where the salt was distilled from the springs that arise where the...
which acts as a drying agent.
For environmental reasons, the use of chalk is controversial in some areas. In areas where rain is infrequent (or under overhangs on any cliff) bold and unsightly chalk marks can build up on popular routes. In places where rain is more common, the chalk residue can form thick deposits. As a result, chalk coloured to match various rock types and biodegradable alternatives are now becoming available. Chalk was introduced
John Gill (climber)
John Gill is an American mathematician who has achieved recognition for his rock-climbing. He is considered the Father of Modern Bouldering by many climbers.-Early life and professional career:...
into rock climbing in the mid 1950s
Chalk bag
Drawstring
A drawstring is a string, cord, or rope used to "draw" or tie closed an opening in fabric or other material...
s. The inner fabric is usually fleece, which traps chalk powder. The outer fabric may be brightly coloured or patterned. Chalk bags are usually attached to the back of a waist belt for easy access by either hand during a climb.
The powdered chalk may be loose in the bag, or, increasingly, a chalk sock, or chalk ball, is filled with the chalk and this is placed into the chalk bag. Chalk socks are pouches made from a porous sock-like material that allows some chalk dust to be excreted when squeezed or rubbed. They allow just enough chalk to be released while keeping the remainder contained.This prevents the unnecessary scattering of dust that loose chalk often causes.
Resin
Resin is sometimes used in bouldering. It is principally used to increase friction between the climber's shoes and the rock by providing a slightly stickier surface. It is made of dried tree resin in the form of a powder. The powder is usually bound inside a cloth with a suitable cord, forming a ball at one end and a free cloth at the other. The resin may then be applied by tapping the resin ball on the rock. Excess is removed by wiping the rock with the free cloth. Resin is also extremely damaging to the rock and is considered to be as bad as chipping in many places. Using resin (also known as pofing) will eventually build an unremovable slick surface over the hold, making it unusable.Nut tool
A nut tool (or nut key) is a small piece of equipment used to extract nuts from cracks in rock that cannot be extracted by hand; they are especially useful when a nut becomes tightly lodged in a crack after supporting a climber's weight or arresting a fall. Made from a flat piece of sheet steel about 20 cm long, a nut tool has a hook at one end and a handle at the other. In order to shift a particularly stubborn nut, a nut tool will sometimes have to be hammered into place.Rope bag
The rope bag is designed for storing and protecting climbing rope. The bag, in addition to carrying the rope, also usually unfolds to provide a flat piece of material or tarp to place the rope on during climbs. The tarp protects the rope from dirt and rock that might impair integrity by causing hard-to-see micro-cuts in the rope's sheath or internal core. When conditions are very wet, a large plastic bag, such as a garbage bag, may also be used.Webbing
Webbing or tape is a length of nonelastic nylon or Spectra/DyneemaUltra high molecular weight polyethylene
Ultra-high-molecular-weight polyethylene , also known as high-modulus polyethylene or high-performance polyethylene , is a subset of the thermoplastic polyethylene. It has extremely long chains, with molecular weight numbering in the millions, usually between 2 and 6 million...
, or a combination of the two. Climbing-specific nylon webbing is generally tubular webbing, that is, it is a tube of nylon pressed flat. It is very strong, generally rated in excess of 9 kN, or about 2,020 pounds of force. Spectra is even stronger, often rated above 20 kN (about 4,500 lbf or 2000KG) and as high as 27 kN (about 6,070 lbf or 2700 KG).
Generally, webbing is made into loops for use as climbing equipment. Such loops, called runners, slings, or quickdraws, have many uses in climbing, including racking gear, building anchors, extending a piece of protection, or even attaching directly to a rock or a tree for an anchor. These loops are made one of two ways—sewn or tied. Both ways of forming runners have advantages and drawbacks, and it is the individual climber that chooses which to use. Generally speaking, most climbers carry a few of both types. It is also important to note that only nylon can be knotted into a runner. Spectra is always sewn because the fibers are too slippery to hold a knot under weight.
Standards
There are two major standards bodies for certifying the safety and reliability of climbing equipment:- CENEuropean Committee for StandardizationThe European Committee for Standardization or Comité Européen de Normalisation , is a non-profit organisation whose mission is to foster the European economy in global trading, the welfare of European citizens and the environment by providing an efficient infrastructure to interested parties for...
(European Committee for Standardisation) - UIAA (International Federation of Mountaineering Associations)
Any products sold in Europe must, by law, be certified to the relevant standards. One of the most important aspects (and obligatory) in the European Union, is that the product carries the CE mark
CE mark
CE marking is a mandatory conformity mark for products placed on the market in the European Economic Area . With the CE marking on a product the manufacturer ensures that the product conforms with the essential requirements of the applicable EC directives...
. Also the name of the manufacturer, the product code and the strength (i.e., on carabiners) must be engraved in the material). There is no such requirement in many other countries, although most manufacturers voluntarily follow UIAA and CEN standards as well as the EU legislation.