Winchester Model 52
Encyclopedia
The Winchester Model 52 was a bolt-action
Bolt-action
Bolt action is a type of firearm action in which the weapon's bolt is operated manually by the opening and closing of the breech with a small handle, most commonly placed on the right-hand side of the weapon...

 .22-caliber
.22 Long Rifle
The .22 Long Rifle rimfire cartridge is a long established variety of ammunition, and in terms of units sold is still by far the most common in the world today. The cartridge is often referred to simply as .22 LR and various rifles, pistols, revolvers, and even some smoothbore shotguns have...

 target rifle introduced by the Winchester Repeating Arms Company
Winchester Repeating Arms Company
The Winchester Repeating Arms Company was a prominent American maker of repeating firearms, located in New Haven, Connecticut. The Winchester brand is today used under license by two subsidiaries of the Herstal Group, Fabrique Nationale of Belgium and the Browning Arms Company of Morgan, Utah.-...

 in 1920. For many years it was the premier smallbore match rifle in the United States, if not the world. Known as the "King of the .22's," the Model 52 has been called by Winchester historian Herbert Houze "perfection in design." However, by the 1970s the World War I-era design was showing its age and had given way in top-level competition to newer match rifles from Walther and Anschütz; and the costly-to-produce Model 52, which had been a loss-leader prestige product for some time, was finally discontinued when US Repeating Arms took over Winchester in 1980.

Origins

During World War I Winchester's management determined that production of the Model 1885 Single Shot would not be resumed in centerfire chamberings after the war, nor in .22 rimfire (the "Winder musket
Winder musket
The Winder musket was a .22-caliber training rifle used by the US Army in the early 20th century.-History:The Winder musket was the brainchild of Colonel C. B. Winder, who advocated marksmanship training with a rifle of similar size and weight to a service rifle but chambered in .22 rimfire, which...

") after existing Army training rifle contracts were fulfilled or cancelled. This meant that a new .22 would be needed for the then very popular sport of target shooting; and Winchester reasoned that returning soldiers would be drawn to the bolt action with which they had become familiar. Moreover, it was hoped that the Army could be persuaded to buy a bolt-action smallbore training rifle in addition to or in place of its existing contracts for Model 1885's. However, despite the outward appearance of its early versions, the Model 52 was never a military rifle (the Army did not in the event buy any). It was designed from the ground up as an "accuracy rifle" —- in fact the world's first production .22 so conceived from the outset.

Development

In February 1918 the company assigned designers Thomas Crosley Johnson and Frank Burton to begin work on the new match rifle. Johnson had more experience with bolt actions than most at Winchester (which was then primarily a maker of lever- and pump-action firearms), having superintended production of the P-14/M1917 Enfield, as well as designing a series of prototype military rifles known as Models A through D. Johnson quickly obtained approval for a receiver
Receiver (firearms)
In firearms terminology, the receiver is the part of a firearm that houses the operating parts. The receiver usually contains the bolt carrier group, trigger group, and magazine port. In most handguns, the receiver, or frame, holds the magazine well or rotary magazine as well as the trigger mechanism...

 based closely on that of the Model D, together with a barrel
Gun barrel
A gun barrel is the tube, usually metal, through which a controlled explosion or rapid expansion of gases are released in order to propel a projectile out of the end at a high velocity....

 adapted from the .22 target version of the Model 1885. The stock
Stock (firearm)
A stock, also known as a buttstock or shoulder stock, is a part of a rifle or other firearm, to which the barrel and firing mechanism are attached, that is held against one's shoulder when firing the gun. Stocks are also found on crossbows though a crossbow stock is more properly referred to as a...

 from the receiver back was modeled on that of the Model D, which in turn had been derived from the Model 1895 Winchester-Lee
M1895 Lee Navy
The Lee Model 1895 was a straight-pull, cam-action magazine rifle adopted in limited numbers by the U.S. Navy and Marine Corps in 1895 as a first-line infantry rifle...

; but incorporated a forearm
Forearm (firearm component)
In firearms, the forearm is a section of the weapon between the receiver and the muzzle. It is used to hold the firearm steady and is usually made out of wood or composite material...

 based on a custom Single Shot target stock designed in 1908 by Winchester's house marksman, Capt. Albert F. Laudensack.
With the externals settled, Johnson and Burton turned to developing the action for what was now "Experimental Design No. 111." Each built a prototype of his own design in Winchester's Model Shop, both at this stage still single-shot. In the fall of 1918 the project's requirements were changed to include a detachable 5-round box magazine: neither Johnson's nor Burton's original bolts would work with a magazine feed, but a combination incorporating elements of both proved highly satisfactory. A finalized repeater prototype was made in April 1919 and taken to Washington where it was evaluated by Lt. Col. Townsend Whelen
Townsend Whelen
Townsend Whelen , called "Townie" by his friends, was an American hunter, soldier, writer, outdoorsman and rifleman....

 of the General Staff, Director of Civilian Marksmanship
Civilian Marksmanship Program
The Civilian Marksmanship Program is a U.S. government-chartered program that promotes firearms safety training and rifle practice for all qualified U.S. citizens with special emphasis on youth. Any U.S. citizen who is not legally prohibited from owning a firearm may purchase a military surplus...

 Maj. Richard LaGarde, and Gen. Fred Phillips of the National Rifle Association
National Rifle Association
The National Rifle Association of America is an American non-profit 501 civil rights organization which advocates for the protection of the Second Amendment of the United States Bill of Rights and the promotion of firearm ownership rights as well as marksmanship, firearm safety, and the protection...

, who were enthusiastic–—- although guarded about the prospects of a Government contract.

Whelen further recommended that pre-production samples be rushed out in time for the National Matches http://www.shootersjournal.com/Features/Haps/1919SmallboreAtCaldwell.pdf at Caldwell, New Jersey that August. Six "G22R" prototypes were readied, and equipped five individual event winners and the victorious U.S. Dewar Cup team: the new Winchester was the talk of the tournament. Accordingly, full production as Model 52 was authorized on 11 September 1919 and commenced in April 1920 (using the lines and machinery originally installed to produce the P-14/M1917 Enfield).

Design

The Model 52 was a non-rotating, rear-locked, cock-on-closing bolt-action design. The Model D-derived receiver was cylindrical, bored and machined from a forged billet, and of substantial thickness. The bolt's dual locking lugs were part of the rotating bolt-handle collar, which provided a camming action to seal the breech on closing and extract the spent case on opening. The bolt itself was undercut for the forward third of its length and rode on polished flats; a projecting lug at the front edge caught the top cartridge in the magazine. The bolt face was rebated so as to surround the case rim, and was chamfered to fit the recessed receiver ring. Dual-opposed sprung claw extractors were inlet into the sides of the bolt, providing controlled cartridge feed. A fixed blade-type ejector was located at the rear of the loading platform.

The original Johnson trigger mechanism, a two-stage or compound-motion military type derived, again, from his Model D, made use of a horizontal sear pivoted from the front; the trigger fit vertically through a pinned mortise in the sear and was shaped at the top so as to cam against the underside of the bolt and depress the assembly, releasing the firing pin. The one-piece striker terminated in a Springfield-like knurled cocking-piece. The wing safety was mounted on the left side of the receiver; when engaged it physically blocked the cocking-piece and cammed it slightly rearward, disengaging the trigger linkage.

Production history

The Model 52 went through many alterations over its sixty years. These changes were not systematic: improvements to the action, stock and so on were made on an ad hoc basis, and it is clearer to treat these alterations so separated rather than as "models."

Note on serial numbers and sub-model or "Style" letter designators: It was Winchester's practice to stamp each receiver with its serial number after milling and preliminary polishing, often weeks or months before the rifle was actually assembled. Accordingly, the alphabetic SN suffixes A, B, C, D and (prefixed) E were applied specifically to changes to the receiver forging itself, originally as an aid to factory workers: not to new designs of stock, furniture or even trigger mechanism if no change to the receiver was required. Other design changes might coincide in time with a receiver 'submodel,' or first appear in the same catalog: many commentators have been confused by this, talking about such things as the "Model 52B stock" which, strictly speaking, did not exist. Winchester catalogs and advertising literature did not mention letter designators until the 1950's.

Notwithstanding the foregoing, the Model 52D represented a comprehensive upgrade of the entire rifle.


Action

  • Speed Lock (1930): Frank Burton replaced Johnson's military-style compound-motion trigger, hung from the sear, with a new trigger with a low pivot and rear sear notch, reducing trigger travel by 75% and providing for set-screw pull-weight adjustment. In addition, Burton redesigned the firing pin so as to reduce its travel from approximately .5" (12mm) to .125" (3mm): all of which resulted in a much faster lock time and greater accuracy. At this time the original model's knurled cocking-piece disappeared, replaced by a short trapezoidal boss. Burton carefully designed the Speed Lock to fit the existing receiver and bolt body without modification.

  • Model 52A (1935, not so marked until 1936): It had been observed that the safety pivot stem was prone to bending, and so it was shortened by .08 inches. This very minor change to the safety necessitated a slight alteration to the left rear receiver wall, and in order to address the confusion which resulted on the assembly line these receivers were stamped with xxxxxA serial numbers beginning in June 1936 . There was otherwise no difference from the "pre-A" Speed Locks.

  • Single-shot Adapter (1935): Not a design change so much as an accessory, the Adapter was effectively a dummy magazine with a shaped top, to facilitate manual loading.

  • Model 52B, "Improved" Speed Lock (1937): Laudensack replaced the original left-mounted wing safety with a more convenient sliding-plate safety on the right side of the receiver. The 52B design also raised the left receiver wall abreast the magazine higher than the right, whereas on earlier versions both sides were flush with the loading platform. Laudensack also modified the Speed Lock mechanism, including the addition of an adjustable trigger-return spring and a sprung sear-disengagement plunger. Unfortunately this revised Speed Lock proved immediately unpopular, most shooters considering it to have excessive vibration and creep compared to the original—-- as well as to the "Miracle Trigger" of the new Remington 37, the 52's first serious American competitor.

  • "Round-top" receiver (1937): The original Model 52 had a flat milled in the top of the receiver bridge with a dovetail machined into it for sight mounting. The 1934 Sporting Model had the receiver left round; in 1937 this became an option on target models as well. The "flat-top" was discontinued in 1946 (none had actually been made since 1941) and all postwar 52's had the round-top form.

  • Model 52C (1951): During the wartime hiatus the Post-War Production Recommendation Committee proposed that when Model 52 manufacture resumed, the poorly-received Style B trigger should be replaced with a completely new design. In the event, Winchester returned to the 52B when the war ended, but in the meantime an extensive (and time-consuming) scientific study of lock mechanisms was undertaken. The result was Harry Sefried's two-lever Micro-Motion trigger, introduced in 1951. Adjustable for pull-weight between 2.5 and 6 lbs, and travel between .030 and an almost imperceptible .003 inches, the Micro-Motion was an instant success, and considered the new state of the art in match rifle trigger locks.

  • Model 52D (1961): In 1956 the US Olympic rifle team commissioned ten custom Model 52C's for the upcoming Melbourne Games. These became the prototypes for the Style D when Winchester elected to redesign the entire rifle literally lock, stock, and barrel. The 52D action differed from its predecessors in being a single-shot: eliminating the magazine aperture in the receiver base rendered the entire assembly stiffer and (theoretically) more accurate. There was also a new Micro-Motion trigger lock based on the Style C but with different geometry, and adjustable to as little as one pound. On the International Match version (1969), a trigger assembly by master gunsmith Karl Kenyon or an ISU set-trigger were offered as alternatives to the Winchester trigger.

  • Model 52E (1975): The Model 52E was a D-model with the receiver milled to accept an aluminum bedding block/recoil lug (not always installed). Shortly afterwards the loading geometry was slightly tweaked.

Stock

  • Laudensack modification (1924–30): Pull lengthened by .5" and the comb raised so as to reduce drop by the same amount, with a thumb-flute (later omitted); the semi-pistol grip was thickened at the wrist and given a fuller profile, deeper curve and square end. The butt pitch was changed from perpendicular to the comb to perpendicular to the barrel axis.

  • "Semi-beavertail" stock (1930–48): Forearm widened to a flat-bottomed, trapezoidal profile; finger grooves omitted; drop reduced again. Oil finish replaced varnish. With slight modifications was renamed the Standard Target Stock in 1934.

  • Special Target Stock (Optional 1934-36): Similar to Standard Target Stock, but with a taller, wider buttstock.

  • Sporting Model (1934–53) See below.

  • Adjustable front sling swivel (1935), which necessitated lengthening the forearm by 1.25".

  • Marksman Stock (Optional from 1936, standard 1948-61): This heavy Laudensack-designed match stock with high comb and full beavertail forearm outsold the Standard Target Stock, which it eventually replaced. Instead of the standard stock's external barrel band, the Marksman used a light band fixed inside the squared-off fore-end; this would be replaced by a pillar mount after the war (Marksman 1A). There were two slightly different versions: the Marksman 1 for telescopic or high scope-level sights, and the Marksman 2 (1938) for standard-height sights. Soft-bedded by 1948. Discontinued 1961.

  • Monte Carlo stock (1953–59) : A modified stock for the Sporting Model with revised buttstock and greatly enlarged, rollover cheekpiece.

  • Model D Marksman stock (1961–80): This very heavy stock with full pistol grip, large zero-drop buttstock, and the forearm flare extended back to the bolt handle introduced the free-floating barrel
    Free-floating barrel
    A free-floating barrel is a specific design technology used in highly accurate rifles, particularly match grade rifles, to increase the accuracy of the weapon.With normal rifles, the barrel rests in contact with the stock...

     to the Model 52 line; it also featured a rail under the forearm for mounting offhand grips and other accessories. (This stock owed little to the 1956 Olympic rifles, which had custom Dick Morgan freestyle stocks).

  • International Match stock (optional from 1969): An Al Freeland freestyle thumbhole stock with adjustable Schützen buttplate; fewer than 750 made. Renamed International 3-Position in 1975.

  • International Prone stock (optional from 1975): A variant of the International Match intended for prone shooting.

Barrel

  • Standard Target: 28", 1" at the receiver tapering to .75"

  • Heavy Target (optional from 1927): 28", 1" at the receiver tapering to .875"

  • Bull Barrel (optional 1939-1960): 28", 1.125" at the receiver tapering to .875". Model 52 Bull-guns came exclusively with the Marksman stock.

  • Sporting (1934–1959): 24", .830" at the receiver tapering to .555"

  • International Match (from 1969, with International Match stock): Heavy Target pattern, precision-rifled and lead-lapped, with a rebated muzzle (omitted in late examples). The chamber was hand-cut to such tolerances that a cartridge could not be fully seated by finger pressure.

  • Stainless steel and nickel steel barrels were offered briefly in 1930-31

Iron

All Model 52's with iron sights
Iron sights
Iron sights are a system of shaped alignment markers used as a sighting device to assist in the aiming of a device such as a firearm, crossbow, or telescope, and exclude the use of optics as in telescopic sights or reflector sights...

 were equipped with receiver-mounted aperture sights, never barrel mounts or open sights.
Because at the time the Model 52 was developed many Army- and National Rifle Association-sponsored matches were restricted to "military-style" sights, and because Winchester had hopes of selling the 52 to the War Department as a marksmanship training rifle, Burton and Laudensack designed a folding-leaf ladder sight for the new target rifle. Designated 82A, it bore some resemblance to the sight on the M1903 Springfield, especially in its pivoting-base windage adjustment (albeit controlled by dual-opposed thumbscrews rather than the Springfield rack-and-worm). However, elevation adjustment was governed by a micrometer click-wheel for precision, not free-sliding like genuine military sights. The Burton-Laudensack helped Model 52 shooters sweep matches and set records throughout the 1920s, but more precise aftermarket sights took over the field and the increasingly obsolescent 82A was not offered after World War II.

Winchester catalogs from the beginning listed 52's with sights by other makers; indeed, the buyer could specify any compatible peep on a special-order basis. The most common of these was the Lyman 48 series: the 48-J and -JH for flat-top dovetail-mount receivers, and the 48-F and -FH for round-top side-mount rifles (standard on the 52 Sporting Model). Other popular sights were the Wittek-Vaver 35 Mielt, the Marble Goss 52, and the Redfield 90 and 100. Late 52's frequently were fitted with Redfield "Olympic" or "International" match sights.

The stock Winchester front sight was an undercut post type; aftermarket rear sights were typically paired with a compatible globe sight
Globe sight
A globe sight is a front sight component used to assist the aiming of a gun/device, usually those intended to launch projectiles, such as firearms, airguns, and crossbows...

 such as the Lyman 17A (except for the Sporter, on which a hooded Lyman or Redfield Gold Bead front sight was standard).

Telescopic

Barrel-mounted scope blocks were optional on early-production 52's; they were made standard in 1924. These blocks were mounted 6.2" apart, giving 1.2" per minute-of-angle graduation at 100 yards. Originally the Winchester A3 and A5 as well as Lyman scopes were offered. In 1933 new bases with Fecker notches were introduced, using standard 7.2" (1"/MOA) spacing; these were compatible with any normal telescopic sight. Long-barrel Fecker, Unertl and Lyman Targetspot were popular telescopes for prewar Model 52 target rifles, with Redfield and Bausch & Lomb becoming ascendant in the 1950s. The late-70's 52E had additional mounting holes drilled in the forward receiver ring.

Sporting Models were not factory fitted for telescopic sights (except by special order) until 1953, when 52C Sporter receivers (not barrels) were provided with tapped and plugged screw holes. However, many earlier examples were so equipped by private gunsmiths: nearly all the popular hunting scopes have been mounted at one time or another. A period-correct scope is not considered by collectors to detract significantly from the 'originality' of a vintage Sporter.

The Sporting Model

Around 1931 Major John W. Hessian, a friend of new Winchester president John M. Olin
John M. Olin
John Merrill Olin was an American businessman. He was the son of Franklin W. Olin.-Early life:Born in Alton, Illinois, Olin graduated from Cornell University with a B.Sc. degree in chemistry and as a brother of the Kappa Sigma Fraternity...

, had a private gunsmith remount his Model 52 in a custom lightweight "sporting" stock. Olin was so impressed that he ordered the development of a 52 Sporter as a production model, which made its debut in 1934.

The Sporting Model had a lightweight 24-inch barrel and an elegant gloss-finished stock of figured walnut with a slender, tapering capped forearm, pronounced pistol grip, high comb and cheekpiece, and fancy checkering. The action was identical with contemporary target models, except that the receiver top was left round rather than milled flat. Weighing only 7-1/4 pounds, it came with Lyman 48-F aperture sights standard, and retailed for the substantial sum of $88.50 (the equivalent of nearly $1400 in 2008).

The Sporter was in all respects a deluxe rifle. While Winchester already had a reputation as the Cadillac of American arms manufacturers, the 52 Sporter was produced with a degree of fit and finish appropriate to a custom gunsmith's shop. Esquire magazine called it "the piece de resistance of all sporting rifles. It's a diamond in a field of chipped glass-- the rifle for the connoisseur." Field & Stream named the 52 Sporter one of the "50 Best Guns Ever Made," calling it "unrivalled in beauty and accuracy."

Understandably the Sporter represented only a small percentage of Model 52's produced between 1934 and its discontinuation in 1959: it is today the most collectible of all 52 variants and a good Sporter will generally bring double or more the price of a comparable Target. (This market reality has unfortunately attracted forgers, and fake "Sporters" converted from target models have fooled the unwary).

See also

  • Winchester Repeating Arms Company
    Winchester Repeating Arms Company
    The Winchester Repeating Arms Company was a prominent American maker of repeating firearms, located in New Haven, Connecticut. The Winchester brand is today used under license by two subsidiaries of the Herstal Group, Fabrique Nationale of Belgium and the Browning Arms Company of Morgan, Utah.-...

  • Winchester Rifle
    Winchester rifle
    In common usage, Winchester rifle usually means any of the lever-action rifles manufactured by the Winchester Repeating Arms Company, though the company has also manufactured many rifles of other action types...

  • List of Winchester models

External links

The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK