.gif)
Volga (automobile)
Encyclopedia
Volga is an automobile brand that originated in the Soviet Union
to replace the venerated GAZ-M20 Pobeda
in 1956. Modern in design, it became a symbol of higher status in the Soviet nomenklatura
. Volga cars were also traditionally used as taxi cabs, road police interceptors, and ambulances (based on the estate
versions).
Four generations of Volga cars have been produced, each undergoing several updates during the production run.
mid-size car which was produced since 1946. However despite its design in form of chassis and body styling, the rapid evolution of the latter in the 1950s already caused Soviet designers in 1951 to put forward a project for its eventual replacement. In 1952 two parallel projects were set up by GAZ: Zvezda ("Star"), which was a futuristic fastback
with panoramic windows and large tailfin
s, and Volga with more conventional styling, which was more realistically suited for the production realities of the 1950s.
By the spring of 1954 the Volga prototypes were being actively tested. The new car introduced a range of additions and advantages over the Pobeda; in addition to being bigger, it had single panoramic forward and rear windscreens, a larger four-cylinder overhead-valve engine, central lubrication of the main chassis elements, hypoidal rear axle and automatic hydromechanical gearbox.
The car's external design was made by Lev Yeremeev and largely influenced by Western vehicles of the same period, American in particular. Internal design, however, was mostly independent, with an exception for the automatic transmission that was developed from the 3-speed Ford-O-Matic.
After thorough testings of the car, which lasted for a further two years, in which several changes were accommodated for, GAZ finally launched the first pre-production batch left GAZ on 10 October 1956. These were used in much publicised promotion drives across the whole Soviet Union where they notched up to 29 thousand kilometres. In 1957 more larger batches were produced and the conveyor came operational in late 1957.
There were three different models of this generation:
'56 Volga - now usually referred to as the "first series" - came into serial production in 1957 and initially had modified Pobeda's flathead 65 hp engine, as the planned overhead-valve 70 hp ZMZ-21 was prepared for serial production only in summer of 1957. The first series of the M-21 Volga was produced right up to November 1958 during which across 30 thousand such cars were assembled. Today they remain the rarest version of the car, and are highly desirable for car collectors.
'58 Volga - the so called "second series" - was introduced in the fall of 1958, the most visible change was the front grille where horizontal chromed bars with a star were replaced by a 16-slit vertical grille, thus earning it the nickname akula ("shark"). Front styling of the "second series" almost mimicked 1954 and 1955 prototypes. Other changes included the shape of the front fenders with raised wheel arches, parking and tail lights. In 1959-1960 minor changes were made to the car's underbody and equipment.
'62 Volga - the so called "third series" - was introduced in 1962 and incorporated many external changes, as well as interior and technical improvements. This model was produced with minor modernizations up to July 15, 1970. After 1965 the model was officially named GAZ-21, instead of GAZ-M-21.
The estate / station wagon
version was designated GAZ-22 (from model year 1962).
A V8
powered version was designated GAZ-23 (from model year 1962).
was demonstrated on foreign and domestic Auto show
. The first batch of 24 vehicles were assembled in 1968, 215 more followed in 1969 and the main conveyor in Gorky
was launched in 1970.
The car can be broken down into three generations. The first years (1970—1975) saw changes to many early design faults, bonnet-mounted mirrors were removed, changes to leaf spring
suspension, and new ignition and boot locks. One unique feature that the early series featured was a belt-speedometer, which proved too complicated and was removed. In 1977 the car saw the first serious modernization, this introduced "teeth" on the bumpers, retractable seat belts, front fog lights and new dashboard. The interior of the car saw the front bench seat replaced by two individual adjustable seats. The third generation was introduced in 1985 (see below).
Like its predecessor the car had several modifications. GAZ-24-01, introduced in 1971 was built to serve as a Taxi
changes included an artificial leather
interior as well as slightly modified engine as the usual taxi equipment. Following the 1977 modernisation, the 24-01 was replaced by GAZ-24-07, which likewise contained taxi equipment. GAZ-24-02 introduced in 1972 was the estate version, production of which lasted right up to 1987, when it was replaced by the GAZ-24-12. An ambulance version with GAZ-24-03 was also built on the estate's version.
The most serious modification however was the GAZ-24-24 which was powered by a 5.53 litre, 195 hp V8 engine borrowed from GAZ-13 Chaika. On top of that it featured a three-gear automatic gearbox, power-assisted steering and reinforced chassis and suspension. This car was never available for private ownership and was used by the KGB services. (This fact may have contributed to the development of the urban legend
of the Black Volga
that was popular in the People's Republic of Poland
in the 1970s.)
Externally the changes affected the new model losing nearly all of its chromed detail via a new plastic grill, new "sunken" door handles. The front door windows no longer had corner leafs, whilst new plastic wing mirrors were now featured on both driver and passenger sides. Inside the old ZMZ-24 was replaced with a derived ZMZ-402 engine, which introduced a new carburator and cooling mechanism allowing a 98 hp output (from 85 hp on the -24). The 24-10 received a new suspension which allowed for larger wheels, with a new rim as standard and also had a new set of vacuum amplified brakes. Some of the cars were fitted with disk brakes from the -3102. Inside the car received a completely new interior, based on the foreign models of the 1980s, including dashboard controls and headrests on seats. Like the base -24 the car had several modifications including an estate GAZ-24-12 introduced in 1987, and a low-production V8 powered GAZ-24-34.
The most significant impact of the car was that unlike the -3102 which was sold primarily for state institutions and corporations, the GAZ-24-10 was exactly opposite, which meant that many private owners wishing for a mid-size car could now acquire one with relative ease. However on the whole, even at its introduction the car was very out of date compared with its western rivals and production ceased in 1992. According to GAZ 1,481,561 cars of the -24 series were produced from 1970 until 1992 making it the highest in history of the plant.
. Loosely based on its predecessor, the new Volga, in addition to receiving a new model number
, had much of the Chaika's innovations incorporated in the design.
Initially the model was planned to have a 3-litre V6 engine as standard, but for economical reasons GAZ instead opted for a new stratified charge
ZMZ-4022 I4 with 105 hp (somewhat similar to Honda CVCC
design); GAZ started development of stratified charge, or, in original terms, "fore-chambered", petrol engines as early as in the early 1950-s, but designs ready for serial production appeared only in late 1970s.
It had 8 conventional inlet and exhaust valves, and 4 supplementary inlet valves that charged combustion fore-chambers, where spark plugs were located, with rich air-fuel mixture. Lean fuel-air mixture in main combustion chambers was ignited not directly by spark plugs, but by cones of heated gases from the fore-chambers.
It also had very unusual 3-barrel carburetor (primary, secondary and fore-chamber barrels), K-156 model.
Power output of this overall outdated OHV engine was somewhat improved if compared to the previous model (ZMZ-24D, 95 hp), fuel economy was largely improved, too. However, torque compared to the ZMZ-24D dropped. Also this power plant suffered from heating issues and was quite sensible to quality of maintenance. Still lacking balance shafts, being out of tune it vibrated violently.
All these issues made it a somewhat bad reputation, and by the 1990s it was replaced by more primitive, but also more reliable and cheap ZMZ-402.10 (98 hp), which was previously used in cheaper GAZ-24-10 Volga.
GAZ-3102 featured front disk brakes and 3.9:1 rear en, as well as many other improvements.
Initially GAZ had ambitious plans for the Volga model line, and 3102 was intended to be just a temporary substitute for completely new 3103, 3104 and 3105 models. These however would never see light, and despite introductions of -3102 based models (-31029, -3110, -31105 - see below), GAZ-3102 is currently still in small-scale production.
Following the introduction of the GAZ-3110, the model received a major mid-life upgrade in 1997. A new 5-step gearbox, single axle, power steering, new front ventilated disc-brakes, 15-inch wheels and modernised interior based on the -3110. Also from the -3110 came the 2.3 litre ZMZ-4062 130 hp fuel-injected engine. Small series production also included Steyr
and Chrysler
engines as well as ZMZ-4064 with 200 hp. In 2005, following the introduction of the GAZ-31105, the -3102 incorporates its interior, and in 2008 its engine standard becomes the 2.5 litre ZMZ-205 which answers to EuroIII standards.
Like its two Volga predecessors, there was limited version for police and KGB, with the Chaika V8 and automatic gearbox, produced up to 1996. Since the early 1990s, 3102 is positioned by GAZ as a more luxurious and classic breed of the Volga, and costs slightly more than a standard Volga, its reputation for quality of 3102 lives up to the price.
Initially the car enjoyed popularity, given the archaic age of the GAZ-24-10 it replaced, but the economic hardships of the 1990s meant that soon its reputation would be broken by the poor quality of assembly and corrosion problems, and the older 3102, still produced on the special conveyor was soon given preference after it was made available to the public following the collapse of the Soviet Union. Despite this and its short production run, GAZ set a record of more than 115 thousand per annum with the 31029.
A major new feature of the 3110 was that in addition to the standard engine selection of the 31029, was the introduction of two diesel engines ZMZ-560 and ZMZ-561. Moreover beginning in 2001, following the upgrade at GAZ factory itself, the -3110 now received modern acrylic paintwork, which drastically reduced the corrosion problems that plagued the Volgas.
In 2003 the -3110 received ball-joint front suspension, also Steyr
turbo diesel engines became available. The estate version of the 3110, the Volga 310221, along with the 310223 ambulance, remains in production as of 2008 along with the GAZ-3102 on its separate conveyor line.
to handle the upper class. However the resulting GAZ-3105, which was never to be part of the Volga family, as it would be produced on the Chaika's conveyor (presently still used for the -3102) due to the economic hardships never reached production.
During the early 1990s GAZ managed to survive the crises by having the Volga do a generation jump from the GAZ-24-10 to the GAZ-3110 in 1997. Simultaneously it never abandoned its quest to develop its eventual replacement, and continued designing a new car, which would feature ABS
, power steering, climate control, automatic gearbox and most of all V6 and even V8 engines as standard, along with leather interiors. The external design was completely new and featured many GAZ-21 influenced retro styling cues developed in collaboration with a US-based company.
However problems began mounting in production costs, as some details had to be borrowed from the older models, at least initially such as the Chaika's axle. The pre-production models lacked the automatic gearbox, and the engine was the same ZMZ-4062.10 that went into GAZ-3110. First shown in 1998, production was scheduled to begin in 2000 with 53 cars delivered. GAZ thought of the -3111 as a replacement for the -3102 and envisioned a rate of 25 thousand per annum. But only 342 were delieved in 2001, and 20 in 2002, with further nine of 2004 before all production ceased.
GAZ-3111 was a failure in terms of marketing and demand. Its high base price and poor reputation that the Volga brand carried in the 1990s meant that those who could afford it, would opt for a foreign car such as the Mercedes E-class or the BMW 5 series
with whom GAZ-3111 thought to compete.
market with the GAZ-3111, GAZ learning from its mistakes, opted to continue with modernising its Volga series. Introduced in 2004, the GAZ-31105 replaced the -3110. Many features of the -3111 such as the front headlights and grille were incorporated into the new Volga. Inside most of the car's transmission and suspension received necessary upgrades, as did the interior. In 2006 the standard engine selection was added with a Chrysler
DOHC 2.4 litre engine.
In 2005 GAZ introduced a long-wheelbase 311055 luxury model, with a new interior that included a wooden trim. The latter feature became standard on models produced from 2007 onwards when GAZ gave the car a minor facelift. Among changes were completely new taillights and a conversion to Euro III standard with the introduction of its new 2.4 litre 123 hp ZMZ-40525 engine, complementing the Chrysler engine, with which the archaic ZMZ-4021 and 4062.10 were phased out. The 31105 is available only as a saloon, with the estate continuing with the old 3110 styling.
Following the introduction of the Volga Siber in 2008 GAZ hopes to fully finish production on both the -3102 and the -31105 by 2010 the base design of both cars still traces its roots to the GAZ-24, thus ending a successful production run of 40 years.
to acquire the tooling and intellectual property rights for the Chrysler Sebring mid-size car design. GAZ stated that the new car would not carry the Volga brand.
was the result.
The convertible model has also been seen again in very limited production, mostly aimed at official procession cars; the roof is replaced with a soft top and the rear doors deleted; front doors are the same size as on the four-door model.
Soviet Union
The Soviet Union , officially the Union of Soviet Socialist Republics , was a constitutionally socialist state that existed in Eurasia between 1922 and 1991....
to replace the venerated GAZ-M20 Pobeda
GAZ-M20 Pobeda
The GAZ-M20 "Pobeda" was a passenger car produced in the Soviet Union by GAZ from 1946 until 1958. It was also licensed to Polish Fabryka Samochodów Osobowych.The first Pobeda was developed in the Soviet Union under chief engineer Andrei A. Liphart...
in 1956. Modern in design, it became a symbol of higher status in the Soviet nomenklatura
Nomenklatura
The nomenklatura were a category of people within the Soviet Union and other Eastern Bloc countries who held various key administrative positions in all spheres of those countries' activity: government, industry, agriculture, education, etc., whose positions were granted only with approval by the...
. Volga cars were also traditionally used as taxi cabs, road police interceptors, and ambulances (based on the estate
Station wagon
A station wagon is a body style variant of a sedan/saloon with its roof extended rearward over a shared passenger/cargo volume with access at the back via a third or fifth door , instead of a trunk lid...
versions).
Four generations of Volga cars have been produced, each undergoing several updates during the production run.
GAZ-M-21, GAZ-21
The first Volga model was originally developed as a replacement for the very successful GAZ-M20 PobedaGAZ-M20 Pobeda
The GAZ-M20 "Pobeda" was a passenger car produced in the Soviet Union by GAZ from 1946 until 1958. It was also licensed to Polish Fabryka Samochodów Osobowych.The first Pobeda was developed in the Soviet Union under chief engineer Andrei A. Liphart...
mid-size car which was produced since 1946. However despite its design in form of chassis and body styling, the rapid evolution of the latter in the 1950s already caused Soviet designers in 1951 to put forward a project for its eventual replacement. In 1952 two parallel projects were set up by GAZ: Zvezda ("Star"), which was a futuristic fastback
Fastback
A fastback is a car body style whose roofline slopes continuously down at the back. The word can also designate the car itself. The style is seen on two-door coupés as well as four-door sedans.-History:...
with panoramic windows and large tailfin
Tailfin
The tailfin era of automobile styling encompassed the 1950s and 1960s, peaking between 1957 and 1960. It was a style that spread worldwide, as car designers picked up styling trends from the US automobile industry where it was the golden epoch of American autodesign.General Motors design chief...
s, and Volga with more conventional styling, which was more realistically suited for the production realities of the 1950s.
By the spring of 1954 the Volga prototypes were being actively tested. The new car introduced a range of additions and advantages over the Pobeda; in addition to being bigger, it had single panoramic forward and rear windscreens, a larger four-cylinder overhead-valve engine, central lubrication of the main chassis elements, hypoidal rear axle and automatic hydromechanical gearbox.
The car's external design was made by Lev Yeremeev and largely influenced by Western vehicles of the same period, American in particular. Internal design, however, was mostly independent, with an exception for the automatic transmission that was developed from the 3-speed Ford-O-Matic.
After thorough testings of the car, which lasted for a further two years, in which several changes were accommodated for, GAZ finally launched the first pre-production batch left GAZ on 10 October 1956. These were used in much publicised promotion drives across the whole Soviet Union where they notched up to 29 thousand kilometres. In 1957 more larger batches were produced and the conveyor came operational in late 1957.
There were three different models of this generation:
'56 Volga - now usually referred to as the "first series" - came into serial production in 1957 and initially had modified Pobeda's flathead 65 hp engine, as the planned overhead-valve 70 hp ZMZ-21 was prepared for serial production only in summer of 1957. The first series of the M-21 Volga was produced right up to November 1958 during which across 30 thousand such cars were assembled. Today they remain the rarest version of the car, and are highly desirable for car collectors.
'58 Volga - the so called "second series" - was introduced in the fall of 1958, the most visible change was the front grille where horizontal chromed bars with a star were replaced by a 16-slit vertical grille, thus earning it the nickname akula ("shark"). Front styling of the "second series" almost mimicked 1954 and 1955 prototypes. Other changes included the shape of the front fenders with raised wheel arches, parking and tail lights. In 1959-1960 minor changes were made to the car's underbody and equipment.
'62 Volga - the so called "third series" - was introduced in 1962 and incorporated many external changes, as well as interior and technical improvements. This model was produced with minor modernizations up to July 15, 1970. After 1965 the model was officially named GAZ-21, instead of GAZ-M-21.
The estate / station wagon
Station wagon
A station wagon is a body style variant of a sedan/saloon with its roof extended rearward over a shared passenger/cargo volume with access at the back via a third or fifth door , instead of a trunk lid...
version was designated GAZ-22 (from model year 1962).
A V8
V8 engine
A V8 engine is a V engine with eight cylinders mounted on the crankcase in two banks of four cylinders, in most cases set at a right angle to each other but sometimes at a narrower angle, with all eight pistons driving a common crankshaft....
powered version was designated GAZ-23 (from model year 1962).
GAZ-24
Development of the replacement for GAZ-21 began as early as 1961, the new car would have to include a modernised 4-cylinder engine of the old Volga along with a six-cylinder, and an automatic transmission. The latter two plans were canceled and by 1965 GAZ finalised the design with a standard 2.5 litre I4 and a 5.5 litre V8 for the government authorities. In 1966 the first prototypes were demonstrated, and in 1967 the concept carConcept car
A concept vehicle or show vehicle is a car made to showcase new styling and or new technology. They are often shown at motor shows to gauge customer reaction to new and radical designs which may or may not have a chance of being produced....
was demonstrated on foreign and domestic Auto show
Auto show
An auto show, or motor show, is a public exhibition of current automobile models, debuts, concept cars, or out-of-production classics. It is commonly attended by automobile manufacturers. Most auto shows occur once or twice a year...
. The first batch of 24 vehicles were assembled in 1968, 215 more followed in 1969 and the main conveyor in Gorky
Nizhny Novgorod
Nizhny Novgorod , colloquially shortened to Nizhny, is, with the population of 1,250,615, the fifth largest city in Russia, ranking after Moscow, St. Petersburg, Novosibirsk, and Yekaterinburg...
was launched in 1970.
The car can be broken down into three generations. The first years (1970—1975) saw changes to many early design faults, bonnet-mounted mirrors were removed, changes to leaf spring
Leaf spring
Originally called laminated or carriage spring, a leaf spring is a simple form of spring, commonly used for the suspension in wheeled vehicles...
suspension, and new ignition and boot locks. One unique feature that the early series featured was a belt-speedometer, which proved too complicated and was removed. In 1977 the car saw the first serious modernization, this introduced "teeth" on the bumpers, retractable seat belts, front fog lights and new dashboard. The interior of the car saw the front bench seat replaced by two individual adjustable seats. The third generation was introduced in 1985 (see below).
Like its predecessor the car had several modifications. GAZ-24-01, introduced in 1971 was built to serve as a Taxi
Taxicab
A taxicab, also taxi or cab, is a type of vehicle for hire with a driver, used by a single passenger or small group of passengers, often for a non-shared ride. A taxicab conveys passengers between locations of their choice...
changes included an artificial leather
Artificial leather
Artificial leather is a fabric or finish intended to substitute for leather in fields such as upholstery, clothing and fabrics, and other uses where a leather-like finish is required but the actual material is cost-prohibitive or unsuitable....
interior as well as slightly modified engine as the usual taxi equipment. Following the 1977 modernisation, the 24-01 was replaced by GAZ-24-07, which likewise contained taxi equipment. GAZ-24-02 introduced in 1972 was the estate version, production of which lasted right up to 1987, when it was replaced by the GAZ-24-12. An ambulance version with GAZ-24-03 was also built on the estate's version.
The most serious modification however was the GAZ-24-24 which was powered by a 5.53 litre, 195 hp V8 engine borrowed from GAZ-13 Chaika. On top of that it featured a three-gear automatic gearbox, power-assisted steering and reinforced chassis and suspension. This car was never available for private ownership and was used by the KGB services. (This fact may have contributed to the development of the urban legend
Urban legend
An urban legend, urban myth, urban tale, or contemporary legend, is a form of modern folklore consisting of stories that may or may not have been believed by their tellers to be true...
of the Black Volga
Black volga
Black Volga refers to an urban legend widespread in Poland, Russia, Belarus, Ukraine, and Mongolia, mainly in the 1960s and 1970s. It was about a black Volga limousine that was allegedly used to abduct people, especially children...
that was popular in the People's Republic of Poland
People's Republic of Poland
The People's Republic of Poland was the official name of Poland from 1952 to 1990. Although the Soviet Union took control of the country immediately after the liberation from Nazi Germany in 1944, the name of the state was not changed until eight years later...
in the 1970s.)
GAZ-24-10
In 1982 GAZ introduced the third generation of the Volga the GAZ-3102. However this car was limited to the public and production of the old series continued, lacking a suitable replacement GAZ undertook a deep upgrade of the -24, utilising many of the -3102 features. This resulted in an entirely new car, which was produced right up to the early 1990s.Externally the changes affected the new model losing nearly all of its chromed detail via a new plastic grill, new "sunken" door handles. The front door windows no longer had corner leafs, whilst new plastic wing mirrors were now featured on both driver and passenger sides. Inside the old ZMZ-24 was replaced with a derived ZMZ-402 engine, which introduced a new carburator and cooling mechanism allowing a 98 hp output (from 85 hp on the -24). The 24-10 received a new suspension which allowed for larger wheels, with a new rim as standard and also had a new set of vacuum amplified brakes. Some of the cars were fitted with disk brakes from the -3102. Inside the car received a completely new interior, based on the foreign models of the 1980s, including dashboard controls and headrests on seats. Like the base -24 the car had several modifications including an estate GAZ-24-12 introduced in 1987, and a low-production V8 powered GAZ-24-34.
The most significant impact of the car was that unlike the -3102 which was sold primarily for state institutions and corporations, the GAZ-24-10 was exactly opposite, which meant that many private owners wishing for a mid-size car could now acquire one with relative ease. However on the whole, even at its introduction the car was very out of date compared with its western rivals and production ceased in 1992. According to GAZ 1,481,561 cars of the -24 series were produced from 1970 until 1992 making it the highest in history of the plant.
GAZ-3102
In late 1976, a review of the GAZ-24 was tasked with finding out the main drawbacks that would need to be fixed in its replacement, the design of which was scheduled to begin. However funds were never allocated for the project. Simultaneously GAZ launched the second generation of the Chaika limousine. The GAZ-14 in its size and interior jumped the class from its predecessor. Thus instead of replacing the Volga, GAZ was tasked with creating a new vehicle that would be suitable for the mid-class of the Soviet nomenklaturaNomenklatura
The nomenklatura were a category of people within the Soviet Union and other Eastern Bloc countries who held various key administrative positions in all spheres of those countries' activity: government, industry, agriculture, education, etc., whose positions were granted only with approval by the...
. Loosely based on its predecessor, the new Volga, in addition to receiving a new model number
Automobile model numbering system in USSR and Russia
A standardized automobile model numbering system has been used in the USSR and Russia. Using the modern version of the system it is possible to determine a vehicle's type and engine capacity. The modern version of the numbering system was introduced in the mid-1970s...
, had much of the Chaika's innovations incorporated in the design.
Initially the model was planned to have a 3-litre V6 engine as standard, but for economical reasons GAZ instead opted for a new stratified charge
Stratified charge engine
In a stratified charge engine, the fuel is injected into the cylinder just before ignition. This allows for higher compression ratios without "knock," and leaner air/fuel mixtures than in conventional internal combustion engines....
ZMZ-4022 I4 with 105 hp (somewhat similar to Honda CVCC
CVCC
CVCC is a trademark by the Honda Motor Company for an engine with reduced automotive emissions, which stood for "Compound Vortex Controlled Combustion". This technology allowed Honda's cars to meet United States emission standards in the 1970s without a catalytic converter...
design); GAZ started development of stratified charge, or, in original terms, "fore-chambered", petrol engines as early as in the early 1950-s, but designs ready for serial production appeared only in late 1970s.
It had 8 conventional inlet and exhaust valves, and 4 supplementary inlet valves that charged combustion fore-chambers, where spark plugs were located, with rich air-fuel mixture. Lean fuel-air mixture in main combustion chambers was ignited not directly by spark plugs, but by cones of heated gases from the fore-chambers.
It also had very unusual 3-barrel carburetor (primary, secondary and fore-chamber barrels), K-156 model.
Power output of this overall outdated OHV engine was somewhat improved if compared to the previous model (ZMZ-24D, 95 hp), fuel economy was largely improved, too. However, torque compared to the ZMZ-24D dropped. Also this power plant suffered from heating issues and was quite sensible to quality of maintenance. Still lacking balance shafts, being out of tune it vibrated violently.
All these issues made it a somewhat bad reputation, and by the 1990s it was replaced by more primitive, but also more reliable and cheap ZMZ-402.10 (98 hp), which was previously used in cheaper GAZ-24-10 Volga.
GAZ-3102 featured front disk brakes and 3.9:1 rear en, as well as many other improvements.
Initially GAZ had ambitious plans for the Volga model line, and 3102 was intended to be just a temporary substitute for completely new 3103, 3104 and 3105 models. These however would never see light, and despite introductions of -3102 based models (-31029, -3110, -31105 - see below), GAZ-3102 is currently still in small-scale production.
Following the introduction of the GAZ-3110, the model received a major mid-life upgrade in 1997. A new 5-step gearbox, single axle, power steering, new front ventilated disc-brakes, 15-inch wheels and modernised interior based on the -3110. Also from the -3110 came the 2.3 litre ZMZ-4062 130 hp fuel-injected engine. Small series production also included Steyr
Steyr
Steyr is a town, located in the Austrian federal state of Upper Austria. The town is situated at the confluence of the rivers Steyr and Enns. Steyr is Austria's 12th most populated town and simultaneously the 3rd largest town in Upper Austria....
and Chrysler
Chrysler
Chrysler Group LLC is a multinational automaker headquartered in Auburn Hills, Michigan, USA. Chrysler was first organized as the Chrysler Corporation in 1925....
engines as well as ZMZ-4064 with 200 hp. In 2005, following the introduction of the GAZ-31105, the -3102 incorporates its interior, and in 2008 its engine standard becomes the 2.5 litre ZMZ-205 which answers to EuroIII standards.
Like its two Volga predecessors, there was limited version for police and KGB, with the Chaika V8 and automatic gearbox, produced up to 1996. Since the early 1990s, 3102 is positioned by GAZ as a more luxurious and classic breed of the Volga, and costs slightly more than a standard Volga, its reputation for quality of 3102 lives up to the price.
GAZ-31029
By the start of the 1990s, GAZ was in a crises state, with the exception of the -3102, its models were more than a decade old and funds that it hoped to acquire for its future developments such as the -3105 never arrived. GAZ-31029 became a cross-breed of the GAZ-3102 and GAZ-24-10, production of which ceased in 1992. The new model had a more aerodynamic front bodywork. The model was also the first in the series to introduce injector engine ZMZ-4062.10 with four valves per cylinder, although carburetor engines were also available. Also unlike the 3102, the 31029 featured a station wagon. The latter, unlike the sedan, still retained most of the rear styling of the -24 series.Initially the car enjoyed popularity, given the archaic age of the GAZ-24-10 it replaced, but the economic hardships of the 1990s meant that soon its reputation would be broken by the poor quality of assembly and corrosion problems, and the older 3102, still produced on the special conveyor was soon given preference after it was made available to the public following the collapse of the Soviet Union. Despite this and its short production run, GAZ set a record of more than 115 thousand per annum with the 31029.
GAZ-3110
GAZ never intended the 31029 to be a permanent model, but with no replacement available, the company opted to continuously modernise the existing vehicle. In 1996, the GAZ-3110 arrived, in the new model, GAZ tried to upgrade the car to a new standard inline with the 1990s trends. Externally all except the door panels were re-styled and replaced. The car received new front and rear designs which saw the return of chrome finishes. Power-assisted steering became standard, along with new 15-inch wheels and Lucas brakes.A major new feature of the 3110 was that in addition to the standard engine selection of the 31029, was the introduction of two diesel engines ZMZ-560 and ZMZ-561. Moreover beginning in 2001, following the upgrade at GAZ factory itself, the -3110 now received modern acrylic paintwork, which drastically reduced the corrosion problems that plagued the Volgas.
In 2003 the -3110 received ball-joint front suspension, also Steyr
Steyr
Steyr is a town, located in the Austrian federal state of Upper Austria. The town is situated at the confluence of the rivers Steyr and Enns. Steyr is Austria's 12th most populated town and simultaneously the 3rd largest town in Upper Austria....
turbo diesel engines became available. The estate version of the 3110, the Volga 310221, along with the 310223 ambulance, remains in production as of 2008 along with the GAZ-3102 on its separate conveyor line.
GAZ-3111
During the late 1980s GAZ developed a concept car for a future replacement for both the business -3102 Volga and the luxury limousine GAZ-14 Chaika. As stated above, the -3102 itself was envisioned as interim project that would fill the void created by the exclusiveness of the -14 Chaika. The new car would leave ZiLZIL
ZIL and similar may refer to:*Zil, a village in the Tabasaran rayon of Dagestan, Russia*Zil stands for Zulfikar Industries Pvt. Ltd. Pakistan, a Chemical factory in Pakistan producting soaps and related chemical products since 1976...
to handle the upper class. However the resulting GAZ-3105, which was never to be part of the Volga family, as it would be produced on the Chaika's conveyor (presently still used for the -3102) due to the economic hardships never reached production.
During the early 1990s GAZ managed to survive the crises by having the Volga do a generation jump from the GAZ-24-10 to the GAZ-3110 in 1997. Simultaneously it never abandoned its quest to develop its eventual replacement, and continued designing a new car, which would feature ABS
Anti-lock braking system
An anti-lock braking system is a safety system that allows the wheels on a motor vehicle to continue interacting tractively with the road surface as directed by driver steering inputs while braking, preventing the wheels from locking up and therefore avoiding skidding.An ABS generally offers...
, power steering, climate control, automatic gearbox and most of all V6 and even V8 engines as standard, along with leather interiors. The external design was completely new and featured many GAZ-21 influenced retro styling cues developed in collaboration with a US-based company.
However problems began mounting in production costs, as some details had to be borrowed from the older models, at least initially such as the Chaika's axle. The pre-production models lacked the automatic gearbox, and the engine was the same ZMZ-4062.10 that went into GAZ-3110. First shown in 1998, production was scheduled to begin in 2000 with 53 cars delivered. GAZ thought of the -3111 as a replacement for the -3102 and envisioned a rate of 25 thousand per annum. But only 342 were delieved in 2001, and 20 in 2002, with further nine of 2004 before all production ceased.
GAZ-3111 was a failure in terms of marketing and demand. Its high base price and poor reputation that the Volga brand carried in the 1990s meant that those who could afford it, would opt for a foreign car such as the Mercedes E-class or the BMW 5 series
BMW 5 Series
The BMW 5 Series is a mid-size / executive car manufactured by BMW since 1972. The car, now in its sixth generation, is sold in sedan and touring body styles....
with whom GAZ-3111 thought to compete.
GAZ-31105
Faced with the failure to enter the foreign-dominated Executive carExecutive car
Executive car is a British term that refers to a car's size and is used to describe an automobile larger than a large family car. In official use, the term is adopted by EuroNCAP, a European organisation founded to test car safety.- History :...
market with the GAZ-3111, GAZ learning from its mistakes, opted to continue with modernising its Volga series. Introduced in 2004, the GAZ-31105 replaced the -3110. Many features of the -3111 such as the front headlights and grille were incorporated into the new Volga. Inside most of the car's transmission and suspension received necessary upgrades, as did the interior. In 2006 the standard engine selection was added with a Chrysler
Chrysler
Chrysler Group LLC is a multinational automaker headquartered in Auburn Hills, Michigan, USA. Chrysler was first organized as the Chrysler Corporation in 1925....
DOHC 2.4 litre engine.
In 2005 GAZ introduced a long-wheelbase 311055 luxury model, with a new interior that included a wooden trim. The latter feature became standard on models produced from 2007 onwards when GAZ gave the car a minor facelift. Among changes were completely new taillights and a conversion to Euro III standard with the introduction of its new 2.4 litre 123 hp ZMZ-40525 engine, complementing the Chrysler engine, with which the archaic ZMZ-4021 and 4062.10 were phased out. The 31105 is available only as a saloon, with the estate continuing with the old 3110 styling.
The end of Volgas?
Although GAZ was developing a "spiritual successor" to the 3111, the front-wheel drive Volga 3115, in December 2005 RusPromAvto, the parent company of GAZ, announced that production of Volga passenger cars would be phased out over a 2-year period, with production to end in 2007. GAZ stated that they would instead concentrate on their more profitable truck, bus, and commercial vehicle businesses. At the same time the announcement was made, GAZ also introduced the Volga 311055, a long wheelbase derivative of the 31105. However, in the summer of 2006, GAZ reversed its earlier decision, announcing that further investments would be made in upgrading the styling and technology of the Volga saloons, keeping them in production as "retro" or "historical" vehicles. In early 2006, GAZ signed a deal with DaimlerChryslerDaimlerChrysler
Daimler AG is a German car corporation. By unit sales, it is the thirteenth-largest car manufacturer and second-largest truck manufacturer in the world. In addition to automobiles, Daimler manufactures buses and provides financial services through its Daimler Financial Services arm...
to acquire the tooling and intellectual property rights for the Chrysler Sebring mid-size car design. GAZ stated that the new car would not carry the Volga brand.
GAZ Volga Siber
When GAZ acquired the Chrysler Sebring license, it decided to further modify the car, and the Volga SiberVolga Siber
The Volga Siber was a saloon automobile, introduced by the Russian firm "GAZ Group" at the "Интеравто-2007" show in Moscow on 29 August 2007. It is built on a platform licensed from an already prior generation of Chrysler Sebring / Dodge Stratus...
was the result.
Current status
The current four-model Volga range, based on the 1967 GAZ M24, consists of the top-range 3102 (since 1982), the 310221 Universal estate (since 1997), the most modern, yet lowest-priced 31105 (since 2004), and the long wheelbase 311055 (since 2005). The Volga Siber is the newest to join the group.The convertible model has also been seen again in very limited production, mostly aimed at official procession cars; the roof is replaced with a soft top and the rear doors deleted; front doors are the same size as on the four-door model.