Submarine Escape Immersion Equipment
Encyclopedia
Submarine Escape Immersion Equipment (SEIE) MK-10, also known as Submarine Escape and Immersion Equipment is whole-body suit and one-man life raft, designed by British company RFD Beaufort Limited, that allows submariners to escape from a sunken submarine
. The suit provides protection against hypothermia
and is rapidly replacing the Steinke hood
rescue device. The suit allows survivors to escape a disabled submarine at depths down to 600 feet (183 m), at a rate of eight or more men per hour.
RFD Beaufort has pioneered the development of Submarine Escape Technology from the 1950’s and has set the global standard for submarine escape. The latest generation RFD Beaufort SEIE MK11 enables free ascent from a stricken submarine and provides extensive protection for the submariner on reaching the surface until rescued. Since 1994 over 25,000 SEIE suits have been supplied to over 20 navies.
A typical assembly comprises a submarine escape and immersion suit, an inner thermal liner, and a gas-inflated single-seat life raft, all contained in an outer protective stowage compartment.
The suit not only keeps the escapee dry and protected from cold shock during escape, but also acts as a thermally efficient immersion suit on reaching the surface. Full protection is therefore provided while deploying and boarding the life raft. The suit provides sufficient lifting force to take the escapee from the submarine to the surface at a safe speed of approximately two to three meters per second.
The British SEIE Mk-10 has been used in Royal Navy Submarines for a number of years.
The British designed SEIE MK-10 is scheduled to replace all Steinke hoods aboard U.S. Navy
submarines. The reconfiguration of escape trunk
s and training of the crews are requirements prior to installing the new system and several submarines have already installed the new system.
The Steinke hood was designed for the same circumstances, but did not include a full-body, thermally insulated suit or life raft. It was at best a last-ditch survival device but would not protect submariners from hypothermia or provide shelter or visibility at the surface, as the SEIE is designed to do.
In the event of an emergency, the SEIE might save submariners from death. However, the device is designed to be a last resort in the event of a submarine emergency at sea. The goal in the event of a submarine mishap is survival. The second is rescue with a submarine rescue vehicle
. Lastly, if a rescue vehicle is not available or cannot connect to a stricken submarine, the crew can escape using the SEIE.
Optimally, a rescue vehicle is preferred as it allows crewmembers to survive with essentially no injuries since they are protected from the great amount of pressure at ocean depths. A rescue vehicle connects directly to the escape hatch of a submarine, eliminating the threat of exposure to cold water and extreme pressure.
In addition, the primary benefit of rescue before resorting to escape with the SEIE is that there would be resources available, including a recompression chamber, should it be needed by the rescued crewmembers.
However, unlike the Steinke Hood, the suit provides good protection from decompression sickness, hypothermia, and climatic exposure.
Submarine
A submarine is a watercraft capable of independent operation below the surface of the water. It differs from a submersible, which has more limited underwater capability...
. The suit provides protection against hypothermia
Hypothermia
Hypothermia is a condition in which core temperature drops below the required temperature for normal metabolism and body functions which is defined as . Body temperature is usually maintained near a constant level of through biologic homeostasis or thermoregulation...
and is rapidly replacing the Steinke hood
Steinke hood
A Steinke hood, named for its inventor, Lieutenant Harris Steinke, is a device designed to aid escape from a sunken submarine,essentially an inflatable life jacket with a hood that completely encloses the wearer's head, trapping a bubble of breathing air...
rescue device. The suit allows survivors to escape a disabled submarine at depths down to 600 feet (183 m), at a rate of eight or more men per hour.
RFD Beaufort has pioneered the development of Submarine Escape Technology from the 1950’s and has set the global standard for submarine escape. The latest generation RFD Beaufort SEIE MK11 enables free ascent from a stricken submarine and provides extensive protection for the submariner on reaching the surface until rescued. Since 1994 over 25,000 SEIE suits have been supplied to over 20 navies.
A typical assembly comprises a submarine escape and immersion suit, an inner thermal liner, and a gas-inflated single-seat life raft, all contained in an outer protective stowage compartment.
The suit not only keeps the escapee dry and protected from cold shock during escape, but also acts as a thermally efficient immersion suit on reaching the surface. Full protection is therefore provided while deploying and boarding the life raft. The suit provides sufficient lifting force to take the escapee from the submarine to the surface at a safe speed of approximately two to three meters per second.
The British SEIE Mk-10 has been used in Royal Navy Submarines for a number of years.
The British designed SEIE MK-10 is scheduled to replace all Steinke hoods aboard U.S. Navy
United States Navy
The United States Navy is the naval warfare service branch of the United States Armed Forces and one of the seven uniformed services of the United States. The U.S. Navy is the largest in the world; its battle fleet tonnage is greater than that of the next 13 largest navies combined. The U.S...
submarines. The reconfiguration of escape trunk
Escape trunk
An escape trunk is a small compartment on a submarine which provides a means for crew to escape from a downed submarine; it operates on a principle similar to an airlock, in that it allows the transfer of persons or objects between two areas of different pressure.-Principle of operation:The water...
s and training of the crews are requirements prior to installing the new system and several submarines have already installed the new system.
The Steinke hood was designed for the same circumstances, but did not include a full-body, thermally insulated suit or life raft. It was at best a last-ditch survival device but would not protect submariners from hypothermia or provide shelter or visibility at the surface, as the SEIE is designed to do.
In the event of an emergency, the SEIE might save submariners from death. However, the device is designed to be a last resort in the event of a submarine emergency at sea. The goal in the event of a submarine mishap is survival. The second is rescue with a submarine rescue vehicle
Deep Submergence Rescue Vehicle
A Deep Submergence Rescue Vehicle is a type of Deep Submergence Vehicle used for rescue of downed submarines and clandestine missions. While DSRV is the term most often used by the United States Navy other nations have different designations for their vehicles.- Chinese models :The People's...
. Lastly, if a rescue vehicle is not available or cannot connect to a stricken submarine, the crew can escape using the SEIE.
Optimally, a rescue vehicle is preferred as it allows crewmembers to survive with essentially no injuries since they are protected from the great amount of pressure at ocean depths. A rescue vehicle connects directly to the escape hatch of a submarine, eliminating the threat of exposure to cold water and extreme pressure.
In addition, the primary benefit of rescue before resorting to escape with the SEIE is that there would be resources available, including a recompression chamber, should it be needed by the rescued crewmembers.
However, unlike the Steinke Hood, the suit provides good protection from decompression sickness, hypothermia, and climatic exposure.