International Harvester R-Series
Encyclopedia
The International R series replaced the L-Series
International Harvester L-Series
The International Harvester L Series Trucks were introduced by International Harvester in 1949 as the replacement for the KB-Series and ran the gamut from light pickup trucks and delivery vehicles to full size tractor trailers...

 in 1953. It was mostly a facelift of the light and medium models, but also a remarkable set of changes. The busy front style seen on L series was cleanly and easily redesigned to become the R line. In place of the ornate grille of the L line was a simple retangular opening with a tapered bar running across the center, and the IH "man on a tractor" logo planted firmly and obviously in the center. The heavy duty models (R-185 and higher) were changed only slightly in appearance, in that four of the seven vertical bars in the upper grille were removed.
There were actually few changes in the R line, other than facelifts. Of course, there was a wide range of engines, 29 to be precise, which were available. Both Cummins
Cummins
Cummins Inc. is a Fortune 500 corporation that designs, manufactures, distributes and services engines and related technologies, including fuel systems, controls, air handling, filtration, emission control and electrical power generation systems...

 and Buda
Buda Engine Co.
Buda Engine was founded in 1881. Based in Harvey, Illinois, Buda manufactured engines for industrial, truck, and marine applications. Early Buda engines were gasoline fueled. Later, diesel engines were introduced, utilizing proprietary Lanova cylinder head designs, injection pumps and nozzles....

 Diesels were now offered in the RD-190 and RD-200 Series, whereas only Cummins had been available, and even then only in models larger than the 190/200 Series.

Gasoline engines

A new Black Diamond 282 engine became the standard powerplant for the R-180, RC-180 and RF-170 models, and was optional in the R-175 Roadliner tractor. The new engine had a shorter stroke, a chrome alloy cylinder block
Cylinder block
A cylinder block is an integrated structure comprising the cylinder of a reciprocating engine and often some or all of their associated surrounding structures...

, and a higher lift camshaft. It also featured slow rotating Stellite-faced exhaust valves and chromed top piston rings. A new "visible flow" carburetor had a fast idle cam that speeded engine warm up.

The three sizes of Super Red Diamond engines (372, 406, and 450 cid) had improved combustion chambers, redesigned valve ports, rotating exhaust valves with more durable seats and improved rings. The Super Blue Diamond (269 cid) had a new cylinder head
Cylinder head
In an internal combustion engine, the cylinder head sits above the cylinders on top of the cylinder block. It closes in the top of the cylinder, forming the combustion chamber. This joint is sealed by a head gasket...

 with improved valve ports and coolant passages, altered ignition timing for the new 6.5:1 compression ratio
Compression ratio
The 'compression ratio' of an internal-combustion engine or external combustion engine is a value that represents the ratio of the volume of its combustion chamber from its largest capacity to its smallest capacity...

, aluminum-alloy pistons, and "visible flow" carburetor.

The little Silver Diamonds (220 and 240 cid) engines featured rotating valves and improved carburetor, plus a ceramic fuel filter
Fuel filter
A fuel filter is a filter in the fuel line that screens out dirt and rust particles from the fuel, normally made into cartridges containing a filter paper. They are found in most internal combustion engines....

 and hotter spark plug
Spark plug
A spark plug is an electrical device that fits into the cylinder head of some internal combustion engines and ignites compressed fuels such as aerosol, gasoline, ethanol, and liquefied petroleum gas by means of an electric spark.Spark plugs have an insulated central electrode which is connected by...

s. LPG engines, which had previously been offered only in L-185 and larger models, were available in trucks as light as the R-150 in the new line.

New models

There were also totally new trucks available at the IHC dealers in 1953. One was the Tilto Cab R-195 and R-205 with cab-over-engine design. However, only a few units were ever built by Hendrickson. The R-195 had a 24,000 lbs GVW, used a Red Diamond 406 engine, 14 inch clutch, overdrive or direct drive (in top gear) five speed transmission, and Eaton single reduction rear axle. The R-205 was similar, but featured the Red Diamond 450 engine, heavier transmission and axles, and larger brakes. The standard tire size for both models was 10.00x20 14 ply.

Another vehicle which was not only new to the lineup but practically a new concept was the Fageol van. Known earlier as the "Manhattan Express", it was a marriage of a semi-trailer
Semi-trailer
A semi-trailer is a trailer without a front axle. A large proportion of its weight is supported by a road tractor, a detachable front axle assembly known as a dolly, or the tail of another trailer...

 and a truck chassis, with the driver's compartment in the front part of the trailer cavity.

4x4 Models debut

All wheel drive
Four-wheel drive
Four-wheel drive, 4WD, or 4×4 is a four-wheeled vehicle with a drivetrain that allows all four wheels to receive torque from the engine simultaneously...

 trucks were offered in International's line as a factory option for the first time in 1953. Previously any such modification would have been made by third parties, or perhaps IHC's own truck modification centers at Fort Wayne, Indiana
Fort Wayne, Indiana
Fort Wayne is a city in the US state of Indiana and the county seat of Allen County. The population was 253,691 at the 2010 Census making it the 74th largest city in the United States and the second largest in Indiana...

 or Springfield, Ohio
Springfield, Ohio
Springfield is a city in the U.S. state of Ohio and the county seat of Clark County. The municipality is located in southwestern Ohio and is situated on the Mad River, Buck Creek and Beaver Creek, approximately west of Columbus and northeast of Dayton. Springfield is home to Wittenberg...

. It was a small beginning: only the R-140 4x4 and the R-160 4x4 were offered initially, but there were more to come.

Pickup trucks

In the light pickup truck
Pickup truck
A pickup truck is a light motor vehicle with an open-top rear cargo area .-Definition:...

 arena, the new R-110 pickup was a handsome little rig. The clean lines of the grille, hood and front fenders were simple, but pleasing. Exterior chrome plating
Chrome plating
Chrome plating, often referred to simply as chrome, is a technique of electroplating a thin layer of chromium onto a metal object. The chromed layer can be decorative, provide corrosion resistance, ease cleaning procedures, or increase surface hardness.-Process:A component to be chrome plated will...

 was used only sparsely, on the identifying logos and on the door handles, but the design did not need chrome to look good. The 115 in wheelbase model featured a 6.5 foot pickup box, and cost $ 1,384.00.

For 1954, IHC introduced the new R-100, which looked exactly as the R-110, but cost US$ 60 less, and carried some improvements. including a bit more horsepower, improved gear ratios, larger brakes, more flexible springs. With a 4,200 lbs GVW (4,600 lbs on R-102) riding a 115 in wheelbase, the power came from a Silver Diamond 220 cid (3.6L), in-line 6 cylinder engine with overhead valves, 104 hp and a 7:1 compression ratio (up from 100 hp and 6.5:1 on the R-110), driving a 3-speed transmission and a semi-floating rear axle. By mid '54 it could also be had with an overdrive transmission which provided a 30% reduction in engine speed at 60 miles per hour, or with a torque converter
Torque converter
In modern usage, a torque converter is generally a type of hydrodynamic fluid coupling that is used to transfer rotating power from a prime mover, such as an internal combustion engine or electric motor, to a rotating driven load...

 fully automatic transmission (basically a GM sourced 3-speed Hydramatic). Power steering also became an option. Tire size was 6.00x16 6 ply.

Production output

Production figures for 1953 were 123,026 (77,817 trucks built at Springfield, 38,613 at Fort Wayne, 626 at Emeryville and 5,970 at Bridgeport), plus another 13,912 trucks built and Chatham, Canada, for a grand total of 136,938.

In 1954 the production totalled 105,463 units (Fort Wayne built 33,637, Emeryville handled 680, Bridgeport produced 7,041, while Canadian Chatham plant churned out 7,073 units).

The biggest seller during the 1954-55 period was the R-110 model, with 72,659 built.

Epilogue

Although it had been only two years since the L line had been revised to become the R line, 1955 was to be another year of big changes for light and medium series. In September the new S series
International Harvester S-Series
The International Harvester S-Series was a medium-duty truck line manufactured by International Harvester. The S-Series was first introduced in mid-1977 as a replacement for the International Harvester Fleetstar. In 1979, other versions of the S-Series were introduced as the successor to the...

was announced, replacing the R models from the 100 to 180 series.

External links

The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK