Ford CVH engine
Encyclopedia
The letters CVH denote a particular type of 4-cylinder internal combustion engine
Engine
An engine or motor is a machine designed to convert energy into useful mechanical motion. Heat engines, including internal combustion engines and external combustion engines burn a fuel to create heat which is then used to create motion...

 produced by the Ford Motor Company
Ford Motor Company
Ford Motor Company is an American multinational automaker based in Dearborn, Michigan, a suburb of Detroit. The automaker was founded by Henry Ford and incorporated on June 16, 1903. In addition to the Ford and Lincoln brands, Ford also owns a small stake in Mazda in Japan and Aston Martin in the UK...

 during the 1980s and 1990s.

The CVH (Compound Valve angle Hemispherical combustion chamber) engine was introduced by Ford in 1980 in the third generation European Ford Escort and for the 1981 North American Escort. It was later used in the Ford Sierra
Ford Sierra
The Ford Sierra is a large family car that was built by Ford Europe from 1982 until 1993. It was designed by Uwe Bahnsen, Robert Lutz and Patrick le Quément. The code used during development was "Project Toni"....

 as well as the second generation Ford Fiesta
Ford Fiesta
The Ford Fiesta is a front wheel drive supermini/subcompact manufactured and marketed by Ford Motor Company and built in Europe, Brazil, Argentina, Mexico, Venezuela, China, India, Thailand and South Africa...

 and from 1983 it was used in the Ford Orion
Ford Orion
The Ford Orion is a saloon car built by the automaker Ford for the European market from 22 July 1983 until 19 September 1993. A total of 3,534,239 Orions were sold throughout the car's 10-year life....

. Engines were built in the Dearborn Engine Plant for the North American market, and in Ford's then-new engine plant in Bridgend
Bridgend
Bridgend is a town in the Bridgend County Borough in Wales, west of the capital, Cardiff. The river crossed by the original bridge, which gave the town its name, is the River Ogmore but the River Ewenny also passes to the south of the town...

 in Wales
Wales
Wales is a country that is part of the United Kingdom and the island of Great Britain, bordered by England to its east and the Atlantic Ocean and Irish Sea to its west. It has a population of three million, and a total area of 20,779 km²...

 for the European market.

The engine was originally conceived in 1974 and has a single overhead cam. Its valves were mounted at a compound angle for hemispherical combustion chambers, although some versions altered the combustion chamber shape to increase swirl. It also featured hydraulic valve lifters, a first for a European Ford engine.

Throughout its 20-year production life, the CVH had a reputation for being almost painfully coarse and noisy at high revs (CVH, said some pundits, was an acronym for Considerable Vibration and Harshness). Jeremy Clarkson
Jeremy Clarkson
Jeremy Charles Robert Clarkson is an English broadcaster, journalist and writer who specialises in motoring. He is best known for his role on the BBC TV show Top Gear along with co-presenters Richard Hammond and James May...

 famously said of the CVH-powered Escort that "it was powered by engines so rough, even Moulinex
Moulinex
Moulinex is a French brand of small electrical appliances and kitchen equipment and is owned by Groupe SEB. Moulinex was originally established as a company in 1937, however at the beginning of September 2001, Moulinex declared bankruptcy....

 wouldn't use them
".

The CVH was notorious for turning its lubricating oil to sludge
Oil sludge
Oil sludge or black sludge is a solid or gel in motor oil caused by the oil gelling or solidifying, usually at temperatures lower than 100 degrees Celsius....

 prematurely if the service schedule was skipped. Timing belts frequently failed about 60000–90000 mi (96,560.4–144,840.6 km).

The most common problem with the CVH is the tendency to drop a valve seat, which most often happens in the 2000-2004 Ford Focus sedan with the 2.0L CVH/SPI engine. These engines usually drop a valve seat with no warning, for no reason, even if the engine has been well maintained. With most dropped valve seat cases, a seat drops on the number 4 cylinder, with the next most common being the number 2 cylinder. With the factory valve seats, the typical life of the 2.0L SPI in a Focus is about 100-120k miles, but it can happen as early as 70k miles. When the valve seat drops out of the cylinder head, it falls into the cylinder and mashes up the piston
Piston
A piston is a component of reciprocating engines, reciprocating pumps, gas compressors and pneumatic cylinders, among other similar mechanisms. It is the moving component that is contained by a cylinder and is made gas-tight by piston rings. In an engine, its purpose is to transfer force from...

 and cylinder head
Cylinder head
In an internal combustion engine, the cylinder head sits above the cylinders on top of the cylinder block. It closes in the top of the cylinder, forming the combustion chamber. This joint is sealed by a head gasket...

. In some cases, the valve seat will exit the cylinder it dropped in and be sucked into other cylinders via the intake manifold until it's obliterated. A valve seat dropping into the cylinder can, and sometimes will, scar the cylinder wall up and bend the piston connecting rods
Connecting rod
In a reciprocating piston engine, the connecting rod or conrod connects the piston to the crank or crankshaft. Together with the crank, they form a simple mechanism that converts linear motion into rotating motion....

. When repairing an SPI with a dropped valve seat, it is very important to remove the intake manifold and have it thoroughly cleaned before bolting it up to a new cylinder head. If not cleaned, trapped particles in the manifold from the dropped valve seat will enter the repaired engine and scar the cylinder walls and sometimes ruin the new cylinder head. The best solution for avoiding the dropped valve seat problem is to purchase and install a new cylinder head that has had the valve seat problem fixed.

Despite its considerable shortcomings in terms of NVH
NVH
NVH is a three-letter abbreviation with multiple meanings, including:*National R.V. Holdings*Noise, vibration, and harshness*Norwegian School of Veterinary Science...

 (Noise, Vibration and Harshness), and its aforementioned intolerance to poor or neglected servicing, the CVH was regarded as being a very easy engine to tune, and with many of its key components being considerably over-engineered. It wasn't long before the engine started receiving attention from the aftermarket tuning industry, and the 1.6 L version quickly became a stalwart of the tuning scene in the 1980s and 1990s with some phenomenal power outputs (over 200 bhp) being extracted from the turbocharged variants. The naturally aspirated 1.6 L was a popular choice for the kit car
Kit car
A kit car, also known as a "component car", is an automobile that is available as a set of parts that a manufacturer sells and the buyer then either assembles into a car themselves, or retains a third party to do part or all of the work on their behalf...

 industry, where it could be relatively easily and cheaply tweaked to around 130 bhp.

The CVH was produced in many different capacities from 1.1 to 2.0 L, the smaller versions being exclusively for the European market.

In the united kingdom the 2 door mk 3 escort 1.3L with a 4 speed box was a popular choice for the teenagers who coudnt afford insurance on a 1.6L, or didnt like astras. The 1.3 escort had equal or better performance for the engine size plus it would do 0-60 using only 2 gears.

1.3

The 1.3 L CVH was introduced in the 1980 European Escort and in the Orion
Ford Orion
The Ford Orion is a saloon car built by the automaker Ford for the European market from 22 July 1983 until 19 September 1993. A total of 3,534,239 Orions were sold throughout the car's 10-year life....

 and Fiesta
Ford Fiesta
The Ford Fiesta is a front wheel drive supermini/subcompact manufactured and marketed by Ford Motor Company and built in Europe, Brazil, Argentina, Mexico, Venezuela, China, India, Thailand and South Africa...

 from 1983 to 1986. Bore was 80 mm (3.1 in) and stroke was 64.5 mm (2.5 in). The 1.3 L was also planned for the North American version of the Escort, but engineering tests found it to be unacceptably underpowered, and plans to produce 1.3 L engines were scrapped just a few months before full-scale production.

For the facelifted "Mark 4", or "Erika-86" version of the European Escort in 1986, this engine was replaced by a 1.3 L version of the Kent/Valencia
Ford Kent engine
The Ford Kent is an internal combustion engine from Ford of Europe. Originally developed in 1959 for the Ford Anglia, it is an in-line four-cylinder engine with a cast-iron cylinder head and block.-Pre-Crossflow:...

 engine in low series trim models—the higher series models used the newer 1.4 L CVH described below.

1.4

The 1.4 L CVH replaced the 1.3 L CVH in the Escort, Orion and Fiesta from early 1986. Bore was 77.2 mm (3 in) and stroke was 74.3 mm (2.9 in). In European trim, this engine produced 75 bhp.

It was widely known as the 'Lean Burn' engine as it was designed primarily for fuel economy and featured a different cylinder head which was aimed less at power output than other CVH powerplants. The carburetted versions feature an unusual Weber 28/30 carb (replacing the unreliable Ford VV unit) with a manifold vacuum-actuated secondary choke (power valve), instead of the more usual sequential linkage which opens the secondary butterfly at 3/4 to full throttle. The idea was to save more fuel, especially with lead footed drivers, but the result was mainly a car which ran horribly lean under any kind of load, particularly after the famous CVH top-end wear begins to reduce engine vacuum with some mileage on the clock. The 1.4 L version is less tuneable than other CVH's, and some top-end parts are not interchangeable with the most common tuning parts; however replacing the carb with the common Weber 32/34 DMTL plus the appropriate inlet manifold makes them more driveable, albeit with a small increase in fuel consumption.

In South Africa, the 1.4 L CVH was fitted to the Ford Laser and Meteor, rebadged Mazda 323s. It replaced the 1.3 L Mazda E-series engine used in these cars and was itself replaced by the 1.3 L Mazda B-series engines.

1.6

The 1.6 L CVH was used in the 1980 European Escort and 1981 North American Escort. Bore was 80 mm (3.1 in) and stroke was 79.5 mm (3.1 in). Output was 69 hp and 86 ft·lbf (116.6 N·m), while European versions produced 90 hp in standard carburettor trim for vehicles with automatic transmission and 97 hp for the Fiesta XR2 and the Escort XR3 or Orion Ghia (twin Weber carburettor), or fuel-injected 105 hp (K-Jetronic
Jetronic
Jetronic is a trade name of an fuel injection technology for automotive petrol engines, developed and marketed by Robert Bosch GmbH from the 1960s onwards. Bosch licensed the concept to many automobile manufacturers. There are several variations of the technology offering technological development...

), 90 hp KE-Jetronic catalyst mechanical fuel injection, 108 hp (EFI Electronic fuel injection with Ford EEC-IV engine management) as found in the XR3i or Orion GLSI or the 115 hp version offered only in the very rare Escort RS1600i – a car developed by Ford Motorsport Germany, the 1.6 CVH featuring reworked cylinder head, solid cam followers and bronze bearings for high revving applications and a host of other motorsport features.

1.6 Turbo

An uprated, turbocharged version of the 1.6 L which was developed by Ford Europe for the hugely popular RS Turbo version of the Ford Escort and also later the Ford Fiesta
Ford Fiesta
The Ford Fiesta is a front wheel drive supermini/subcompact manufactured and marketed by Ford Motor Company and built in Europe, Brazil, Argentina, Mexico, Venezuela, China, India, Thailand and South Africa...

. It made 132 hp at 6,000 rpm, and 133 ft·lbf (180.3 N·m) of torque at a very tractable 3,000 rpm. The boosted engine was substantially smoother than its normally aspirated cousins, the forced induction helping to damp out unpleasant harmonics. The block was slightly modified to provide an oil return from the turbocharger. Crankshaft and connecting rods were identical to the lesser 1.6 L models, but the Mahle pistons were unique to the RS Turbo. These are manufactured using a pressure cast method, which makes them considerably stronger and more expensive than the normal cast pistons. The pistons dropped the compression ratio to 8.3:1, allowing the use of large amounts of boost pressure. The standard engine only needs 7 psi of boost to produce its quoted power output, and is considered to be detuned from the factory. Because of its strength and detuned nature, tuners continue to increase the standard figures by more than 100% for a relatively reasonable fee. Even today, some 20 years after its release, new ways are being developed to extract even more performance.

1.8

The 1.8 CVH was a very rare engine, it was just used in the European Ford Sierra. There are not many differences to the 1.6 engine. Bore was still 80 mm, but a different crankshaft with a stroke of 88 mm gave the engine its higher capacity. The cylinder head was equipped with hydraulic roller camshaft followers to reduce noise and help the engine to run smoother.

1.9

The CVH was bumped up to 1.9 L for the North American 1986 model year Escort. Bore was now 82 mm (3.2 in) and stroke was up as well to 88 mm (3.5 in). This stroke length would be used in the 2.0 L CVH engines, and continued into the Zeta
Ford Zeta engine
Developed in the late 1980s by the Ford Motor Company, the Ford Zeta engine was a straight-4, double overhead cam internal combustion engine with which Ford had intended to replace the analogous Pinto and CVH models....

engine which replaced it. This long stroke necessitated a raised engine block deck, a design also shared with later units. The camshaft and water pump are driven by the timing belt. This engine is of a non-interference design: the valves don't contact the pistons if the timing belt breaks. Output was 86 hp and 100 ft·lbf (135.6 N·m) with a carburetor; when electronic throttle-body fuel injection was added, the basic 1.9 L added 4 hp, although torque was little changed.

Electronic fuel injection and hemispherical "hemi" combustion chambers were added for 1987's Escort GT, bumping output to 108 hp and 114 ft·lbf (154.6 N·m). This engine developed a good reputation for performance and surviving GTs of this generation are quite fun to drive.

The 90 hp 1.9 L of the late 1980s, particularly when equipped with either the four- or five-speed manual transaxle, was notable for delivering outstanding fuel economy. Somewhat surprisingly, four-speed Escort Pony models achieved better mileage than five-speed cars, with upwards of 30 mpg in city driving and 40–45 mpg on the highway not uncommon.

The second generation of American Escort utilized sequential EFI for 1991–1996, but power and torque was little changed at 88 hp and 108 ft·lbf (146.4 N·m) respectively.

2.0

The 2.0 L was introduced in the 1997 Escort (North American) sedan and wagon as SPI2000 (Split Port Induction). It now used split port induction and produced 110 hp and 125 ft·lbf (169.5 N·m). The additional displacement was achieved by boring the 1.9 L engine to 84.8 mm (3.3 in). It's the smoothest and quietest CVH engine made, and continued to deliver excellent fuel economy, although due to the cars' increased weight, mileage is somewhat less than earlier models (usually mid-20s city, mid-30s highway). As with the 1.9, the water pump is driven by the timing belt. This engine is an interference design: the valves can collide with the pistons if the camshaft and crankshaft rotate independently of each other. It is the last CVH engine made and saw an end to production in the last of the 2004 Ford Focus LX/SE sedan and wagons.

Applications

  • 1980-1986 Ford Escort Mk 3 (Europe): 1.3 L, 1.6 L, 1.6 L Turbo
  • 1986-1990 Ford Escort Mk 4 (Europe): 1.3 L, 1.4 L, 1.6 L, 1.6 L Turbo
  • 1990-2000 Ford Escort Mk 5 (Europe): 1.3 L, 1.4 L, 1.6 L (1.6 L replaced by Zetec in '92)
  • 1981-1984 Ford Escort (US) 1.6 L
  • 1981-1984 Mercury Lynx
    Mercury Lynx
    The Mercury Lynx was a compact car produced by the Ford Motor Company for its Mercury division from 1981 to 1987. It was a rebadged version of the Ford Escort. In 1987, the Lynx was dropped after slumping sales . In 1988, Mercury launched the Tracer as the Lynx's replacement...

     (US) 1.6 L
  • 1982-1983 Mercury LN7 (US) 1.6 L
  • 1986-1996 Ford Escort (US) 1.9 L
  • 1985-1987 Mercury Lynx
    Mercury Lynx
    The Mercury Lynx was a compact car produced by the Ford Motor Company for its Mercury division from 1981 to 1987. It was a rebadged version of the Ford Escort. In 1987, the Lynx was dropped after slumping sales . In 1988, Mercury launched the Tracer as the Lynx's replacement...

     (US) 1.9 L
  • 1991-1996 Mercury Tracer (US) 1.9 L
  • 1997-2002 Ford Escort (US) 2.0 L
  • 1997-1999 Mercury Tracer (US) 2.0 L
  • 2000-2004 Ford Focus (US) 2.0 L
  • 1983-1989 Ford Fiesta Mk 2: 1.3 L, 1.4 L, 1.6 L (1.4 L replaced 1.3 L for '86 model year)
  • 1989-1995 Ford Fiesta Mk 3: 1.4 L, 1.6 L (replaced by Zetec '93 model year onward bar 1.4 Si), 1.6 L Turbo
  • 1988-1993 Ford Sierra
    Ford Sierra
    The Ford Sierra is a large family car that was built by Ford Europe from 1982 until 1993. It was designed by Uwe Bahnsen, Robert Lutz and Patrick le Quément. The code used during development was "Project Toni"....

    : 1.6 L, 1.8 L (Replaced Pinto
    Ford Pinto engine
    The Ford Pinto engine was the unofficial but generic nickname for a 4-cylinder internal combustion engine built by Ford Europe. In Ford sales literature it was referred to as the EAO or OHC engine and because it was designed to the metric system, it was sometimes called the "Metric engine". The...

     from '89 model year onward)
  • 1983-1986 Ford Orion Mk 1 (Europe): 1.3 L, 1.6 L
  • 1986-1990 Ford Orion Mk 2 (Europe): 1.4 L, 1.6 L
  • 1990-1992 Ford Orion Mk 3 (Europe): 1.4 L, 1.6 L
  • 1982-1988 Ford EXP
    Ford EXP
    The Ford EXP and Mercury LN7 were the first two-seaters that Ford offered in 25 years. The coupes shared the wheelbase and mechanicals of the Ford Escort with a longer, more stylish body. It was first shown at the Chicago Auto Show and introduced in April 1981 as an early 1982 model.Comparing the...

     (US) 1.6 L and 1.9 L
  • 1982-1993 Morgan 4/4 1.6 L
  • 1984-1990 Reliant Scimitar SS1 1.3, 1.4, 1.6


Note that the 1.1 L version used the 1117 cc Kent engine although some right hand drive examples were built with the CVH mechanicals in this capacity including the van variant.

CVH-PTE

The CVH-PTE is a revised version of the Ford CVH engine which was introduced on the European Ford Fiesta 1.4 Si in 1994 and the Ford Escort in 1994. It features multi-point fuel injection and a thicker crankcase to combat the harshness at high revs, although the 1990s saw it gradually being phased out in favour of the newer Zetec 16-valve unit.

See also

The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK