Bersham Ironworks
Encyclopedia
Bersham Ironworks were large ironworks at Bersham
Bersham
Bersham is a small Welsh village in the suburbs of the county borough of Wrexham that lies next to the River Clywedog. Wrexham owes a large amount of its original industrial heritage to Bersham, but despite this the village still retains a rural feeling....

, near Wrexham
Wrexham
Wrexham is a town in Wales. It is the administrative centre of the wider Wrexham County Borough, and the largest town in North Wales, located in the east of the region. It is situated between the Welsh mountains and the lower Dee Valley close to the border with Cheshire, England...

, North Wales
North Wales
North Wales is the northernmost unofficial region of Wales. It is bordered to the south by the counties of Ceredigion and Powys in Mid Wales and to the east by the counties of Shropshire in the West Midlands and Cheshire in North West England...

. They are most famous for being the original working site of John Wilkinson
John Wilkinson (industrialist)
John "Iron-Mad" Wilkinson was an English industrialist who pioneered the use and manufacture of cast iron and cast-iron goods in the Industrial Revolution.-Early life:...

. They were also the first site in the world to use a new way of boring holes in cannon
Cannon
A cannon is any piece of artillery that uses gunpowder or other usually explosive-based propellents to launch a projectile. Cannon vary in caliber, range, mobility, rate of fire, angle of fire, and firepower; different forms of cannon combine and balance these attributes in varying degrees,...

 and steam engine cylinders.

History

Ironworking first started at Bersham around 1640, and evidence shows that cannon for the Royalists
Cavalier
Cavalier was the name used by Parliamentarians for a Royalist supporter of King Charles I and son Charles II during the English Civil War, the Interregnum, and the Restoration...

 in the English Civil War
English Civil War
The English Civil War was a series of armed conflicts and political machinations between Parliamentarians and Royalists...

 were made here. In the 18th Century, Isaac Wilkinson
Isaac Wilkinson
Isaac Wilkinson was an English industrialist, one of the founders of the iron industry and pioneer of the Industrial Revolution. However, his business ethics were precarious and his commercial affairs frequently chaotic. He became much addicted to litigation.-Early life:Wilkinson was born in...

 bought the ironworks and ran it for a considerable number of years. The main product was cannon, although the process to make cannon in iron was difficult, and cannonballs often became stuck in the barrel, leading to explosions.

When Isaac's son John Wilkinson took over, he employed a boring machine to accurately make a smooth bore cannon
Cannon
A cannon is any piece of artillery that uses gunpowder or other usually explosive-based propellents to launch a projectile. Cannon vary in caliber, range, mobility, rate of fire, angle of fire, and firepower; different forms of cannon combine and balance these attributes in varying degrees,...

, which became so popular that the cannon were used in the American War of Independence and the Napoleonic wars
Napoleonic Wars
The Napoleonic Wars were a series of wars declared against Napoleon's French Empire by opposing coalitions that ran from 1803 to 1815. As a continuation of the wars sparked by the French Revolution of 1789, they revolutionised European armies and played out on an unprecedented scale, mainly due to...

. As well as cannon, the smooth bore machine could make cylinders for Boulton & Watt
Boulton and Watt
The firm of Boulton & Watt was initially a partnership between Matthew Boulton and James Watt.-The engine partnership:The partnership was formed in 1775 to exploit Watt's patent for a steam engine with a separate condenser. This made much more efficient use of its fuel than the older Newcomen engine...

 steam engine
Steam engine
A steam engine is a heat engine that performs mechanical work using steam as its working fluid.Steam engines are external combustion engines, where the working fluid is separate from the combustion products. Non-combustion heat sources such as solar power, nuclear power or geothermal energy may be...

s, and Wilkinson entered into a partnership with Watt to make the cylinders. However, Watt discovered Wilkinson had been marketing his own black market steam engines on the side, and the partnership was terminated.

With Europe and the world returning to peace, the market for cannon was lost. The space to expand at Bersham had run out, and Wilkinson needed to move on. He bought a house and estate at nearby Brymbo
Brymbo
Brymbo is a local government community, the lowest tier of local government, part of Wrexham County Borough in Wales. It is a village situated in the hilly country to the west of Wrexham town, largely surrounded by farmland....

 and built a blast furnace there, at what would later become Brymbo Steelworks
Brymbo Steel Mill
The Brymbo Steel Works was a former large steelworks in the village of Brymbo near Wrexham, Wales. In operation between 1796 and 1990, it was significant on account of its founder, one of whose original blast furnace stacks remains on the site....

.

John Wilkinson had fallen out with his brother William, who raised a small gang to destroy Bersham Ironworks. Upon hearing this, John Wilkinson also raised a gang and helped the destruction: he was only too happy to destroy the mill causing him a loss. Only three structures survived: the mill building; the building which housed the smooth bore machine; and a lime kiln.

After this, the site was leased to a family who opened a paper mill on the site. This did not last a long time, however, and the site was left derelict. The site on the southern bank of the River Clywedog
River Clywedog
The River Clywedog in the county borough of Wrexham, Wales has always been the lifeblood of the area, watering crops and livestock since early times, powering corn mills and driving industrial machinery...

 had been completely destroyed, while the original works were in a state of decay. The site passed into agricultural use, and the "Mill building" became a mill, complete with a water wheel, still intact today. Most of the mill building has new red brick roof built on the old sandstone walls.

Excavation and debate

Between 1987 and 1991, extensive excavations were carried out on the site, and revealed all the foundations of the original buildings and the rear wall of the engine house. They also revealed a lime kiln, with lime on the walls. Another excavation showed it was a blast furnace, finding pig iron
Pig iron
Pig iron is the intermediate product of smelting iron ore with a high-carbon fuel such as coke, usually with limestone as a flux. Charcoal and anthracite have also been used as fuel...

 around the area. This opened debate to what it actually was, and the debate is taught in local schools. Another interesting find during the excavations was a wooden railway. The world's first excavated wood
Wood
Wood is a hard, fibrous tissue found in many trees. It has been used for hundreds of thousands of years for both fuel and as a construction material. It is an organic material, a natural composite of cellulose fibers embedded in a matrix of lignin which resists compression...

en waggonway, that led from a site near Minera Limeworks
Minera Limeworks
The Minera Limeworks were extensive lime quarries and kilns at Minera in Wrexham, Wales. It was located at , near the villages of Gwynfryn, Minera, and Coedpoeth and was locally referred to as The Calch.-History:...

 to a shelf above the works, presumably for tipping of lime, needed for the ironmaking process. The piece of track, carbonised, still rests at the museum inside the mill building.

Restoration and preservation

Now that the historical importance of Bersham was recognised, Wrexham Council put the site forwards for preservation as the Bersham Heritage Centre. The nearby Bersham School was reopened as an extensive museum dedicated to local history and Bersham Ironworks, and holds the remaining smooth bore cutting piece from the machine. The Mill building was restored and opened as a secondary museum, and contains artefacts such as the wooden waggonway and several pieces from the excavations, with a guided tour of them all. Most recently, the building that made the cannon's smooth bores was given a new roof and internal scaffolding to reinforce the structure. Now the site is earmarked for more funding by the Welsh Assembly Government
Welsh Assembly Government
The Welsh Government is the devolved government of Wales. It is accountable to the National Assembly for Wales, the legislature which represents the interests of the people of Wales and makes laws for Wales...

.

External links

The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK