Spectral Induced Polarisation
Encyclopedia
Spectral induced polarisation (SIP) or Complex resistivity is a geophysical survey
Geophysical survey
Geophysical survey is the systematic collection of geophysical data for spatial studies. Geophysical surveys may use a great variety of sensing instruments, and data may be collected from above or below the Earth's surface or from aerial or marine platforms. Geophysical surveys have many...

 technique and an extension of the induced polarisation
Induced polarization
Induced polarization is a geophysical imaging technique used to identify subsurface materials, such as ore. The method is similar to electrical resistivity tomography, in that an electric current is induced into the subsurface through two electrodes, and voltage is monitored through two other...

 (IP) method, being itself an extension of measuring the Earth's resistance at a single frequency or under direct current (a technique commonly known by the name resistivity
Resistivity logging
Resistivity logging is a method of well logging that works by characterizing the rock or sediment in a borehole by measuring its electrical resistivity. Resistivity is a fundamental material property which represents how strongly a material opposes the flow of electric current...

). SIP measures the frequency-dependent (i.e. spectral) complex impedance
Electrical impedance
Electrical impedance, or simply impedance, is the measure of the opposition that an electrical circuit presents to the passage of a current when a voltage is applied. In quantitative terms, it is the complex ratio of the voltage to the current in an alternating current circuit...

, equivalent to the amount of resistance
Electrical resistance
The electrical resistance of an electrical element is the opposition to the passage of an electric current through that element; the inverse quantity is electrical conductance, the ease at which an electric current passes. Electrical resistance shares some conceptual parallels with the mechanical...

 and phase shift
Phase (waves)
Phase in waves is the fraction of a wave cycle which has elapsed relative to an arbitrary point.-Formula:The phase of an oscillation or wave refers to a sinusoidal function such as the following:...

 between electrical current and voltage
Voltage
Voltage, otherwise known as electrical potential difference or electric tension is the difference in electric potential between two points — or the difference in electric potential energy per unit charge between two points...

. The usual frequency range for alternating current (AC) applied during SIP surveys is tens of kHz to mHz. As with other geophysical methods, SIP aims to distinguish material properties of the subsurface, such as salinity
Salinity
Salinity is the saltiness or dissolved salt content of a body of water. It is a general term used to describe the levels of different salts such as sodium chloride, magnesium and calcium sulfates, and bicarbonates...

 and saturation
Aquifer
An aquifer is a wet underground layer of water-bearing permeable rock or unconsolidated materials from which groundwater can be usefully extracted using a water well. The study of water flow in aquifers and the characterization of aquifers is called hydrogeology...

.
The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK