Smith-Putnam wind turbine
Encyclopedia
In 1941 the Smith-Putnam wind turbine, the world's first megawatt-size wind turbine, was connected to the local electrical distribution system on Grandpa's Knob in Castleton, Vermont
, USA. It was designed by Palmer Cosslett Putnam
and manufactured by the S. Morgan Smith Company. This 1.25 MW Smith-Putnam turbine operated for 1100 hours before a blade failed at a known weak point, which had not been reinforced due to war-time material shortages. It would be the largest wind turbine ever built until 1979.
, producing 2,400 V at 60 cycles. The generator and rotor hub were mounted on a pintle
beam, which allowed the rotor to capture wind from varying directions. The pitch of the blades was controlled by hydraulic cylinders to maintain constant speed.
. Putnam was aware of the Balaklava 100 kW turbine and desired to improve on its performance . By 1937 he had enlisted General Electric, and the Central Vermont Public Service Corporation. General Electric provided a generator, and Central Vermont Public Services Corporation was interested in an energy supply that could displace purchased power for meeting peak loads. The S. Morgan Smith company was a maker of hydroelectric turbines but was looking for an additional product line, and agreed in 1939 to assist in financing and manufacture of a pilot turbine project. Only 23 months elapsed between first discussions and production of power.
In the early morning of March 26, 1945, the operator on duty in the nacelle of the turbine was thrown down by vibrations. He stopped the turbine. On investigation, it was found one turbine blade had broken off and fallen about 750 feet (229 m) away. The blade had failed at a previously repaired weak point in the spar; due to wartime shortages, it had been impractical to complete a full repair and reinforcement of the blade root.
stated that the project achieved proof of the concept of synchronous generation of wind power, and projected future commercial use of wind-generated electricity.
Castleton, Vermont
Castleton is a town in Rutland County, Vermont, United States. Castleton is about to the west of Rutland, and about east of the New York/Vermont state border. The town had a population of 4,717 at the 2010 census. Castleton State College is located there, with roots dating to 1787...
, USA. It was designed by Palmer Cosslett Putnam
Palmer Cosslett Putnam
Palmer Cosslett Putnam was an American consulting engineer and wind power pioneer, the son of George Haven Putnam and Emily Putnam . Putnam graduated from MIT in 1924 as a geologist after serving in the RAF during World War I...
and manufactured by the S. Morgan Smith Company. This 1.25 MW Smith-Putnam turbine operated for 1100 hours before a blade failed at a known weak point, which had not been reinforced due to war-time material shortages. It would be the largest wind turbine ever built until 1979.
Description
The turbine had two blades, 175 feet in diameter, on the down-wind side of a 120 foot steel lattice tower. Each blade was approximately 8 feet wide and 66 feet long, and weighed eight tons. The blades were built on steel spars and covered with a stainless steel skin. The blade spars were hinged at their root attachment to the hub, allowing them to assume a slight cone shape. The generator was a 1250 kW 600 RPM synchronous generator made by General ElectricGeneral Electric
General Electric Company , or GE, is an American multinational conglomerate corporation incorporated in Schenectady, New York and headquartered in Fairfield, Connecticut, United States...
, producing 2,400 V at 60 cycles. The generator and rotor hub were mounted on a pintle
Pintle
A pintle is a pin or bolt, usually inserted into a gudgeon, which is used as part of a pivot or hinge.A pintle/gudgeon set is used in many spheres, for example: in sailing to hold the rudder onto the boat; in transportation a pincer-type device clamps through a lunette ring on the tongue of a...
beam, which allowed the rotor to capture wind from varying directions. The pitch of the blades was controlled by hydraulic cylinders to maintain constant speed.
Origins
Palmer Putnam became interested in production of electric power from wind after observing high winds at Cape CodCape Cod
Cape Cod, often referred to locally as simply the Cape, is a cape in the easternmost portion of the state of Massachusetts, in the Northeastern United States...
. Putnam was aware of the Balaklava 100 kW turbine and desired to improve on its performance . By 1937 he had enlisted General Electric, and the Central Vermont Public Service Corporation. General Electric provided a generator, and Central Vermont Public Services Corporation was interested in an energy supply that could displace purchased power for meeting peak loads. The S. Morgan Smith company was a maker of hydroelectric turbines but was looking for an additional product line, and agreed in 1939 to assist in financing and manufacture of a pilot turbine project. Only 23 months elapsed between first discussions and production of power.
Construction
The site chosen for the prototype turbine was a previously un-named 2000 foot (600 m) elevation, named "Grandpa's Knob"; this mountain was not so high as to have excessive ice build up, but had high wind speeds. Access to the site required construction of a road with 12 to 15% grade. Due to the impending entry of the United states into World War II, some of the fundamental research and testing process was skipped so that major components could be made before wartime material shortages occurred.Operation and failures
No-load testing of the unit began in August 1941 to verify mechanical operation of the turbine and the blade control system. The generator was first synchronized to the local electrical grid on the evening of October 19, 1941, and tested under load varying from zero to 700 kW. The unit operated for about 1000 hours between startup and February 1943, when a shaft bearing failed. Due to wartime material priorities, the bearing was not replaced until March 3, 1945 when the unit achieved another three weeks of operation.In the early morning of March 26, 1945, the operator on duty in the nacelle of the turbine was thrown down by vibrations. He stopped the turbine. On investigation, it was found one turbine blade had broken off and fallen about 750 feet (229 m) away. The blade had failed at a previously repaired weak point in the spar; due to wartime shortages, it had been impractical to complete a full repair and reinforcement of the blade root.
Aftermath
A study completed in 1945 suggested that a block of six turbines similar to the prototype, producing 9 MW, could be installed in Vermont for around US$ 190 per kilowatt. However, the economic value to the power utility was only $125 per kilowatt, and the wind turbine was not considered economically viable by a factor of 1.5 . Although the S. Morgan Smith company had spent more than US$ 1.25 million on the prototype turbine, entirely private funding, it concluded that there was insufficient prospect for profit on further development. Repairs were never done after the March 1945 failure. The prototype turbine was dismantled in 1946, leaving only concrete footings and a marker plaque at the site today. In the introduction to Putnam's book, Vannevar BushVannevar Bush
Vannevar Bush was an American engineer and science administrator known for his work on analog computing, his political role in the development of the atomic bomb as a primary organizer of the Manhattan Project, the founding of Raytheon, and the idea of the memex, an adjustable microfilm viewer...
stated that the project achieved proof of the concept of synchronous generation of wind power, and projected future commercial use of wind-generated electricity.
External reading
- Palmer C. Putnam, Power from the Wind, 1948
- Robert W. Righter, Wind energy in America: a history, University of Oklahoma Press, 1996 ISBN 0-8061-2812-7
- http://www.time.com/time/magazine/article/0,9171,849476,00.htmlTIMETimeTime is a part of the measuring system used to sequence events, to compare the durations of events and the intervals between them, and to quantify rates of change such as the motions of objects....
magazine , Harnessing the Wind, September 1941, retrieved 2009 Nov 21 ]