Selexol
Encyclopedia
Selexol is the trade name for an acid gas removal
solvent that can separate acid gas
es such as hydrogen sulfide
and carbon dioxide
from feed gas streams such as synthesis gas produced by gasification
of coal, coke, or heavy hydrocarbon
oils. By doing so, the feed gas is made more suitable for combustion
and/or further processing.
), the Selexol solvent dissolves (absorbs) the acid gas
es from the feed gas at relatively high pressure, usually 300 to 2000 psia (2.07 to 13.8 MPa). The rich solvent containing the acid gases is then let down in pressure and/or steam stripped to release and recover the acid gases. The Selexol process can operate selectively to recover hydrogen sulfide
and carbon dioxide
as separate streams, so that the hydrogen sulfide can be sent to either a Claus
unit for conversion to elemental sulfur
or to a WSA Process unit for conversion to sulfuric acid
while, at the same time, the carbon dioxide can be sequestered or used for enhanced oil recovery. The Selexol process is similar to the Rectisol
process, which uses refrigerated methanol
as the solvent. The Selexol solvent is a mixture of the dimethyl ether
s of polyethylene glycol
.
Selexol is a physical solvent, unlike amine based acid gas removal solvents that rely on a chemical reaction with the acid gases. Since no chemical reactions are involved, Selexol usually requires less energy than the amine based processes. However, at feed gas pressures below about 300 psia(2.07 MPa), the Selexol solvent capacity (in amount of acid gas absorbed per volume of solvent) is reduced and the amine based processes will usually be superior.
Amine gas treating
Amine gas treating, also known as gas sweetening and acid gas removal, refers to a group of processes that use aqueous solutions of various alkylamines to remove hydrogen sulfide and carbon dioxide from gases...
solvent that can separate acid gas
Acid gas
Acid gas is natural gas or any other gas mixture which contains significant amounts of hydrogen sulfide , carbon dioxide , or similar contaminants. The terms acid gas and sour gas are often incorrectly treated as synonyms...
es such as hydrogen sulfide
Hydrogen sulfide
Hydrogen sulfide is the chemical compound with the formula . It is a colorless, very poisonous, flammable gas with the characteristic foul odor of expired eggs perceptible at concentrations as low as 0.00047 parts per million...
and carbon dioxide
Carbon dioxide
Carbon dioxide is a naturally occurring chemical compound composed of two oxygen atoms covalently bonded to a single carbon atom...
from feed gas streams such as synthesis gas produced by gasification
Gasification
Gasification is a process that converts organic or fossil based carbonaceous materials into carbon monoxide, hydrogen, carbon dioxide and methane. This is achieved by reacting the material at high temperatures , without combustion, with a controlled amount of oxygen and/or steam...
of coal, coke, or heavy hydrocarbon
Hydrocarbon
In organic chemistry, a hydrocarbon is an organic compound consisting entirely of hydrogen and carbon. Hydrocarbons from which one hydrogen atom has been removed are functional groups, called hydrocarbyls....
oils. By doing so, the feed gas is made more suitable for combustion
Combustion
Combustion or burning is the sequence of exothermic chemical reactions between a fuel and an oxidant accompanied by the production of heat and conversion of chemical species. The release of heat can result in the production of light in the form of either glowing or a flame...
and/or further processing.
Process description
In the Selexol process (now licensed by UOP LLCUOP LLC
UOP LLC, formerly known as Universal Oil Products, is a multi-national company developing and delivering technology to the petroleum refining, gas processing, petrochemical production, and major manufacturing industries....
), the Selexol solvent dissolves (absorbs) the acid gas
Acid gas
Acid gas is natural gas or any other gas mixture which contains significant amounts of hydrogen sulfide , carbon dioxide , or similar contaminants. The terms acid gas and sour gas are often incorrectly treated as synonyms...
es from the feed gas at relatively high pressure, usually 300 to 2000 psia (2.07 to 13.8 MPa). The rich solvent containing the acid gases is then let down in pressure and/or steam stripped to release and recover the acid gases. The Selexol process can operate selectively to recover hydrogen sulfide
Hydrogen sulfide
Hydrogen sulfide is the chemical compound with the formula . It is a colorless, very poisonous, flammable gas with the characteristic foul odor of expired eggs perceptible at concentrations as low as 0.00047 parts per million...
and carbon dioxide
Carbon dioxide
Carbon dioxide is a naturally occurring chemical compound composed of two oxygen atoms covalently bonded to a single carbon atom...
as separate streams, so that the hydrogen sulfide can be sent to either a Claus
Claus process
The Claus process is the most significant gas desulfurizing process, recovering elemental sulfur from gaseous hydrogen sulfide. First patented in 1883 by the scientist Carl Friedrich Claus, the Claus process has become the industry standard....
unit for conversion to elemental sulfur
Sulfur
Sulfur or sulphur is the chemical element with atomic number 16. In the periodic table it is represented by the symbol S. It is an abundant, multivalent non-metal. Under normal conditions, sulfur atoms form cyclic octatomic molecules with chemical formula S8. Elemental sulfur is a bright yellow...
or to a WSA Process unit for conversion to sulfuric acid
Sulfuric acid
Sulfuric acid is a strong mineral acid with the molecular formula . Its historical name is oil of vitriol. Pure sulfuric acid is a highly corrosive, colorless, viscous liquid. The salts of sulfuric acid are called sulfates...
while, at the same time, the carbon dioxide can be sequestered or used for enhanced oil recovery. The Selexol process is similar to the Rectisol
Rectisol
Rectisol is the trade name for an acid gas removal process that uses methanol as a solvent to separate acid gases such as hydrogen sulfide and carbon dioxide from valuable feed gas streams. By doing so, the feed gas is made more suitable for combustion and/or further processing...
process, which uses refrigerated methanol
Methanol
Methanol, also known as methyl alcohol, wood alcohol, wood naphtha or wood spirits, is a chemical with the formula CH3OH . It is the simplest alcohol, and is a light, volatile, colorless, flammable liquid with a distinctive odor very similar to, but slightly sweeter than, ethanol...
as the solvent. The Selexol solvent is a mixture of the dimethyl ether
Dimethyl ether
Dimethyl ether , also known as methoxymethane, is the organic compound with the formula . The simplest ether, it is a colourless gas that is a useful precursor to other organic compounds and an aerosol propellant. When combusted, DME produces minimal soot and CO, though HC and NOx formation is...
s of polyethylene glycol
Polyethylene glycol
Polyethylene glycol is a polyether compound with many applications from industrial manufacturing to medicine. It has also been known as polyethylene oxide or polyoxyethylene , depending on its molecular weight, and under the tradename Carbowax.-Available forms:PEG, PEO, or POE refers to an...
.
Selexol is a physical solvent, unlike amine based acid gas removal solvents that rely on a chemical reaction with the acid gases. Since no chemical reactions are involved, Selexol usually requires less energy than the amine based processes. However, at feed gas pressures below about 300 psia(2.07 MPa), the Selexol solvent capacity (in amount of acid gas absorbed per volume of solvent) is reduced and the amine based processes will usually be superior.