Rotogravure
Encyclopedia
Intaglio (printmaking)
Intaglio is a family of printmaking techniques in which the image is incised into a surface, known as the matrix or plate, and the incised line or area holds the ink. Normally, copper or zinc plates are used as a surface, and the incisions are created by etching, engraving, drypoint, aquatint or...
printing
Printing
Printing is a process for reproducing text and image, typically with ink on paper using a printing press. It is often carried out as a large-scale industrial process, and is an essential part of publishing and transaction printing....
process; that is, it involves engraving
Engraving
Engraving is the practice of incising a design on to a hard, usually flat surface, by cutting grooves into it. The result may be a decorated object in itself, as when silver, gold, steel, or glass are engraved, or may provide an intaglio printing plate, of copper or another metal, for printing...
the image onto an image carrier. In gravure printing, the image is engraved onto a cylinder
Cylinder (geometry)
A cylinder is one of the most basic curvilinear geometric shapes, the surface formed by the points at a fixed distance from a given line segment, the axis of the cylinder. The solid enclosed by this surface and by two planes perpendicular to the axis is also called a cylinder...
because, like offset printing
Offset printing
Offset printing is a commonly used printing technique in which the inked image is transferred from a plate to a rubber blanket, then to the printing surface...
and flexography
Flexography
Flexography is a form of printing process which utilizes a flexible relief plate. It is basically an updated version of letterpress that can be used for printing on almost any type of substrate including plastic, metallic films, cellophane, and paper...
, it uses a rotary printing press
Rotary printing press
A rotary printing press is a printing press in which the images to be printed are curved around a cylinder. Printing can be done on large number of substrates, including paper, cardboard, and plastic. Substrates can be sheet feed or unwound on a continuous roll through the press to be printed and...
.
Once a staple of newspaper photo features, the rotogravure process is still used for commercial printing of magazines, postcards, and corrugated (cardboard) product packaging.
History and development
In the last quarter of the 19th century, the method of image photo transfer onto carbon tissue covered with light-sensitive gelatin was discovered, and was the beginning of rotogravure. In the 1930s–1960s, newspapers published relatively few photographs and instead many newspapers published separate rotogravure sections in their Sunday editions. These sections were devoted to photographs and identifying captions, not news stories. Irving BerlinIrving Berlin
Irving Berlin was an American composer and lyricist of Jewish heritage, widely considered one of the greatest songwriters in American history.His first hit song, "Alexander's Ragtime Band", became world famous...
's song "Easter Parade"
Easter Parade (song)
"Easter Parade" is a popular song that was written by Irving Berlin and was published in 1933. The lyrics describe the singer's involvement in an American cultural event called the Easter parade....
specifically refers to these sections in the lines "the photographers will snap us, and you'll find that you're in the rotogravure." And the song "Hooray for Hollywood" contains the line "...armed with photos from local rotos" referring to young actresses hoping to make it in the movie industry.
In 1932 a George Gallup
George Gallup
George Horace Gallup was an American pioneer of survey sampling techniques and inventor of the Gallup poll, a successful statistical method of survey sampling for measuring public opinion.-Biography:...
"Survey of Reader Interest in Various Sections of Sunday Newspapers to Determine the Relative Value of Rotogravure as an Advertising Medium" found that these special rotogravures were the most widely read sections of the paper and that advertisements there were three times more likely to be seen by readers than in any other section.
Process
- Components
The first step of Gravure is to create the cylinder with the engraved images that need to be printed: the engraving process will create on the cylinder surface the cells that will contain the ink in order to transfer it to the paper.
Since the amount of ink contained in the cells correspond to different colour intensities on the paper, the domensions of the cells must be carefully set: deeper cells will produce more intensive colours whereas less deep cells will produce less intensive ones.
There are three methods of photoengraving that have been used for engraving of gravure cylinders, where the cell open size or the depth of cells can be uniform or variable:
| Method | cell size | cell depth |
|---|---|---|
| Conventional | uniform | variable |
| "Two positive" or "Lateral hard dot" | variable | variable |
| Direct transfer | variable | uniform |
Gravure cylinders are usually made of steel and plated with copper and a light-sensitive coating. Previously machined to remove imperfections in the copper, most cylinders are now laser engraved. In the past, they were either engraved using a diamond stylus or chemically etched using ferric chloride, which creates pollution. If the cylinder was chemically etched, a resist (in the form of a negative image) was transferred to the cylinder before etching. The resist protects the non-image areas of the cylinder from the etchant. After etching, the resist was stripped off. The operation is analogous to the manufacture of printed circuit boards. Following engraving, the cylinder is proofed and tested, reworked if necessary, and then chrome plated.
A rotogravure printing press has one printing unit for each color
Color
Color or colour is the visual perceptual property corresponding in humans to the categories called red, green, blue and others. Color derives from the spectrum of light interacting in the eye with the spectral sensitivities of the light receptors...
, typically CMYK or cyan, magenta, yellow and key (printing terminology for black), but the number of units varies depending on what colors are required to produce the final image.
There are five basic components in each color unit:
- an engraved cylinder (AKA "Gravure cylinder") whose circumference can differ according to the layout of the job
- an ink fountain
- a doctor blade
- an impression roller
- a dryer.
- Process
In direct image carriers such as gravure cylinders, the ink is applied directly to the cylinder and from the cylinder it is transferred to the substrate
While the press is in operation, the engraved cylinder is partially immersed in the ink fountain, filling the recessed cells. As the cylinder rotates, it draws ink out of the fountain with it. Acting as a squeegee
Squeegee
A squeegee, squilgee or sometimes squimjim, is an onomatopoeically named tool with a flat, smooth rubber blade, used to remove or control the flow of liquid on a flat surface...
, the doctor blade scrapes the cylinder before it makes contact with the paper, removing excess ink from the non-printing (non-recessed) areas and leaving in the cells the right amount of ink required: this tool is located quite close to the paper so that the ink left in the cells does not have enough time to dry. Next, the paper gets sandwiched between the impression roller and the gravure cylinder: this is where the ink gets transferred from the recessed cells to the paper. The purpose of the impression roller is to apply force, pressing the paper onto the gravure cylinder, ensuring even and maximum coverage of the ink. The capillary action of the substrate and the pressure from impression rollers force the ink out of the cell cavity and transfer it to the substrate (Figure 1). Then the paper goes through a dryer because it must be completely dry before going through the next color unit and absorbing another coat of ink.
Features
Because gravure is capable of transferring more ink to the paper than other printing processes, it is noted for its remarkable density range (light to shadow) and hence is a process of choice for fine art and photography reproduction, though not typically as clean an image as that of sheet fed litho or web offset lithoOffset printing
Offset printing is a commonly used printing technique in which the inked image is transferred from a plate to a rubber blanket, then to the printing surface...
. Gravure's major quality shortcoming is that all images, including type and "solids," are actually printed as dots, and the screen pattern of these dots is readily visible to the naked eye.
Since the Gravure printing process requires the creation of one cylinder for each colour of the final image, and this ends in being very expensive, the gravure is suitable for high volume printing.
Gravure is an industrial printing process running at a consistent and high quality, such as in its typical uses of long-run magazines in excess of 1 million copies, mail order catalogs, consumer packaging, Sunday newspaper ad inserts, wallpaper, and laminates for furniture where quality and consistency are desired. Another application area of gravure printing is in the flexible-packaging sector. A wide range of substrates such as polyethylene, polypropylene, polyester, BOPP, etc. can be printed in the gravure press.
Rotogravure presses for publication run at 45 feet (14 m) per second and more, with paper reel widths of over 10 feet (3 m), enabling an eight-unit press to print about seven million four-color pages per hour.
The vast majority of gravure presses print on rolls (also known as webs) of paper
Paper
Paper is a thin material mainly used for writing upon, printing upon, drawing or for packaging. It is produced by pressing together moist fibers, typically cellulose pulp derived from wood, rags or grasses, and drying them into flexible sheets....
, rather than sheets of paper. (Sheetfed gravure is a small, specialty market.) Rotary gravure presses are the fastest and widest presses in operation, printing everything from narrow labels to 12-foot-wide (3.66-meter-wide) rolls of vinyl flooring.
Additional operations may be in line with a gravure press, such as saddle stitching facilities for magazine or brochure work.
- Points for
The rotogravure printing process is the most popular printing process used in flexible-packaging manufacturing, because of its ability to print on thin film such as polyester, OPP, nylon, and PE, which come in thicknesses of 10 to 30 micrometers.
Other appreciated features are:
- the printing cylinders that can last through large-volume runs without getting worn out
- the good quality image reproduction
- the possibility of decrease the per-unit costs running high volume production
- Points against
The major flaws of the gravure printing process are:
- the high start-up costs (200.000 copies needed, at least, to make it profitable) that make it suitable only for big editions
- rasterized lines and texts
- the use of chemicals in the ink.