Rifle bedding
Encyclopedia
Rifle bedding is the process of filling gaps between the action and the stock of a rifle
Rifle
A rifle is a firearm designed to be fired from the shoulder, with a barrel that has a helical groove or pattern of grooves cut into the barrel walls. The raised areas of the rifling are called "lands," which make contact with the projectile , imparting spin around an axis corresponding to the...

 with an epoxy
Epoxy
Epoxy, also known as polyepoxide, is a thermosetting polymer formed from reaction of an epoxide "resin" with polyamine "hardener". Epoxy has a wide range of applications, including fiber-reinforced plastic materials and general purpose adhesives....

 based material. The bedding creates a stable and precise fit for the contact surfaces. Bedding is a technique employed in accurizing
Accurizing
Accurizing is the process of improving the accuracy of a firearm or airgun.For firearms, accuracy is defined as the ability to hit exactly what one is aiming at...

 a rifle and to a lesser extent prolonging the life of the stock.

Increased Accuracy

Bedding increases accuracy in part by relieving stress on the action. The rifle's action will rarely sit flush in the stock without bedding. This causes the action to flex when tightening the bolts holding the action to the stock. The flexing results in a loss of accuracy. Bedding will create a flush surface for the action and prevent flexing. Bedding also reduces movement of the action in the stock. Without bedding, the action may be more likely to shift after a shot. If the action shifts and does not return to same spot in the stock the rifle will lose the ability to maintain zero.

Prolonged Stock Life

Bedding can help prolong the life of the stock. Repeated recoil forces can cause movement of the action in the stock. As the action moves, friction can create wear in the stock surface. Eventually the repeated wear can ruin the stock.

Methods of Bedding

Several different methods of bedding can be used depending on the type of stock, desired results and level of experience of the person attempting to perform the bedding.

Methods include:
  • Full contact bedding of the action with the barrel floated.
  • Full contact bedding of the action and the barrel.
  • Full contact bedding of the action with a pressure-bearing pad for the barrel.
  • Pillar bedding of the action with the barrel floated.
  • Full length aluminum action bedding block.


Full contact bedding of the action with the barrel floated is a very common method for long range rifles with a heavy barrel. A free-floating barrel
Free-floating barrel
A free-floating barrel is a specific design technology used in highly accurate rifles, particularly match grade rifles, to increase the accuracy of the weapon.With normal rifles, the barrel rests in contact with the stock...

 will generally produce the greatest accuracy. However, a pressure pad under the barrel just forward of the action can sometimes improve accuracy by acting on barrel harmonics and reducing stress on the action from the weight of the barrel. Pillar bedding can be used to float the action as well as the barrel, but the process is more difficult.

Bedding

Generally a slow, hard drying epoxy
Epoxy
Epoxy, also known as polyepoxide, is a thermosetting polymer formed from reaction of an epoxide "resin" with polyamine "hardener". Epoxy has a wide range of applications, including fiber-reinforced plastic materials and general purpose adhesives....

 is used as bedding for a rifle. The epoxy should dry very hard to withstand recoil and prevent flexing of the action. The epoxy should not shrink or expand after hardening. Several epoxies are designed for outdoor use where they need to expand and contract with changes in temperature. These epoxies are not suitable for rifle bedding. Some epoxies are supplied with coloring additives to allow the epoxy color to match the stock color. Most other epoxies are only available in one or two colors. Some epoxies will come with release agent
Release agent
A release agent is a chemical used to get a slip effect. It can provide a solution in processes involving mold release, die-cast release, plastic release, and tire and web release.-Concrete:...

, otherwise cooking spray, car wax or shoe polish can be used instead.

Tools

Tools that may be helpful when bedding a rifle are:
Long, replacement action bolts with heads removed, modeling clay, masking tape
Masking tape
Masking tape is a type of pressure sensitive tape made of a thin and easy-to-tear paper, and an easily released pressure sensitive adhesive. It is available in a variety of widths. It is used mainly in painting, to mask off areas that should not be painted...

, electrical tape
Electrical tape
Electrical tape is a type of pressure-sensitive tape used to insulate electrical wires and other material that conduct electricity. It can be made of many plastics, but vinyl is most popular, as it stretches well and gives an effective and long lasting insulation...

, inletting tools or Dremel
Dremel
Dremel is a brand of power tools known primarily for their rotary tools. The tools were originally developed by Albert J. Dremel, who founded the Dremel Company in 1932 in Racine, Wisconsin. In 1993, the company was purchased by Robert Bosch GmbH, and today it is a division of the Robert Bosch Tool...

, sand paper, stock vise, barrel vise or suitable holding fixture, cotton swabs, rags and cleaner/degreaser.

Precautions

If performed improperly, bedding can destroy a rifle. Mechanical locking occurs when bedding material is allowed to harden in holes or around protrusions on the action. If locking occurs the action can be permanently fixed to the stock. Extreme measures may have to be taken to separate the stock from the action, possibly destroying one or both. Locking can be prevented by carefully filling all holes and crevices in the action with clay and removing or taping any protrusions on the action. Never apply bedding material on the upper half of the action or anything that is wider at the bottom than the top. Improperly applied or insufficient release agent can cause the bedding material to bind to the metal. If the trigger assembly is not removed prior to bedding, epoxy can seep into the trigger assembly and ruin it.
The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK