Peter Ghyczy
Encyclopedia
Peter Ghyczy is a German designer of Hungarian origin, who lives in the Netherlands.
, a fine district of Budapest
. After the invasion of the Red Army 1945, in which his father was killed, he was sent to the family's property Vásárosnameny in the Puszta plains, where he also visited the village school. In 1947 he was brought to Belgium by the International Red Cross for one year, where he learned French.
After the family was expropriated of their estate, he returned to his mother in Budapest, where he finished primary school. From 1954 on he attended the Benedictine Secondary School in Pannonhalma connected to a famous monastery. 1956, after the crushing of the Hungarian uprising against the communist regime, he fled with his mother and brother via Vienna
to Bonn
.
In 1960 he attained his "Abitur" (A level) and started to study architecture at the Technical University of Aachen specializing on constructional engineering. Beginning in 1961 he assisted professor Rudolf Steinbach, a renowned German architect, and later worked at the institute of plastic research. In between he took jobs in Paris and at a Unesco project in Kalabsha, Egypt, which was saving antique ruins from a reservoir. 1967 he graduated as an architect in Aachen with a thesis on unconventional school buildings.
From 1968 to 1972 he lived in Lemförde in the South of Lower Saxony. In 1969 he became a German citizen. Peter Ghyczy is married and father of four. Today he lives in Beesel near the river of Maas at the east border of the Netherlands.
, Hans Gugelot, Peter Maly – and had a major impact on German and international design. In 1968 he took a leading position at the company Elastogran in Lemförde in southern Lower Saxony, where he was responsible for the development of products made from polyurethane
. Owner of the company Gottfried Reuter, former chemist at Bayer in Leverkusen, was an expert in the field of polyurethane production, for which he held several patents. In the 1960s he formed a company group (with a turnover of a few hundred million Deutschmarks based on these patents).
Between 1968 and 1972 Peter Ghyczy developed many innovative designs, which identified him as one of the most productive designers of these years. In 1970 the Design-Center in Lemförde was inaugurated, build according to Ghyczy's design, made completely from polyurethane and being the first of its kind. It was one of the early German design studios, whose close cooperation between product design and technical development was unheard of in the plastics industry until then. This design studio gave birth to many novel, modular components, such as shelters, facade elements but most notably various types of furniture, among them chairs, shell chairs, sectional sofas, tables, shelves and plastic door fronts for offices and kitchens.
Licenses were given to well-known companies, among others Drabert, "die Vereinigten Werkstätten", Vitra (at the time still named Fehlbaum GmbH), and Beylarian in the USA. Of all these only one model came to fame: das Gartenei from 1968, the first hinged armchair. The Design-Center was closed as early as 1972 and later demolished. Reuter sold his company to BASF and - more or less secretly - his polyurethane technology to the GDR, which was given the Gartenei along with it. This led to the fact that a chemical plant in Senftenberg produced it in unknown quantities. After the fall of the "iron curtain" it made a reappearance as "Senftenberger Ei" - often falsely seen as an East German design - in the art scene of the late 90s, where it turned into a highly desired collector's item, Peter Ghyczy now produces his own re-edition.
In 1972 he founded Ghyczy + Co Design in Viersen and presented his first furniture collection. It was based on casting techniques which he transferred from plastics to metal. He patented many of his developments, especially for his innovative method clamping glass and metal together. He used this technique for a new type of "frameless" table, which has often been copied and which he used as a basis for an entire product line. Finally the also patented "frameless" shelf R03 came around which has long made its way - as plagiarism - into many furniture stores.
Peter Ghyczy designed numerous lamps, for example the series MegaWatt and the table lamp MW 17, a curved, balanced tabular steel Rohr; another "frameless" construction - an idea, which resembles a famous piece in design history, the "legless" "Freischwinger" presented by Mart Stamm and Ludwig Mies van der Rohe in 1927. Peter Ghyczy often used casted metal parts. This methode derives from his early experiences with plastic castings.
In 1974 Peter Ghyczy moved his company to the Netherlands. In 1985 it moved to Swalmen, where it remains until today.
Biography
Peter Ghyczy, child of a widespread aristocratic family grew up BudaBuda
For detailed information see: History of Buda CastleBuda is the western part of the Hungarian capital Budapest on the west bank of the Danube. The name Buda takes its name from the name of Bleda the Hun ruler, whose name is also Buda in Hungarian.Buda comprises about one-third of Budapest's...
, a fine district of Budapest
Budapest
Budapest is the capital of Hungary. As the largest city of Hungary, it is the country's principal political, cultural, commercial, industrial, and transportation centre. In 2011, Budapest had 1,733,685 inhabitants, down from its 1989 peak of 2,113,645 due to suburbanization. The Budapest Commuter...
. After the invasion of the Red Army 1945, in which his father was killed, he was sent to the family's property Vásárosnameny in the Puszta plains, where he also visited the village school. In 1947 he was brought to Belgium by the International Red Cross for one year, where he learned French.
After the family was expropriated of their estate, he returned to his mother in Budapest, where he finished primary school. From 1954 on he attended the Benedictine Secondary School in Pannonhalma connected to a famous monastery. 1956, after the crushing of the Hungarian uprising against the communist regime, he fled with his mother and brother via Vienna
Vienna
Vienna is the capital and largest city of the Republic of Austria and one of the nine states of Austria. Vienna is Austria's primary city, with a population of about 1.723 million , and is by far the largest city in Austria, as well as its cultural, economic, and political centre...
to Bonn
Bonn
Bonn is the 19th largest city in Germany. Located in the Cologne/Bonn Region, about 25 kilometres south of Cologne on the river Rhine in the State of North Rhine-Westphalia, it was the capital of West Germany from 1949 to 1990 and the official seat of government of united Germany from 1990 to 1999....
.
In 1960 he attained his "Abitur" (A level) and started to study architecture at the Technical University of Aachen specializing on constructional engineering. Beginning in 1961 he assisted professor Rudolf Steinbach, a renowned German architect, and later worked at the institute of plastic research. In between he took jobs in Paris and at a Unesco project in Kalabsha, Egypt, which was saving antique ruins from a reservoir. 1967 he graduated as an architect in Aachen with a thesis on unconventional school buildings.
From 1968 to 1972 he lived in Lemförde in the South of Lower Saxony. In 1969 he became a German citizen. Peter Ghyczy is married and father of four. Today he lives in Beesel near the river of Maas at the east border of the Netherlands.
Work as a designer
Peter Ghyczy is one of several important designers in the 20th century who were also immigrants – among them Henry van de Velde, Marcel BreuerMarcel Breuer
Marcel Lajos Breuer , was a Hungarian-born modernist, architect and furniture designer of Jewish descent. One of the masters of Modernism, Breuer displayed interest in modular construction and simple forms.- Life and work :Known to his friends and associates as Lajkó, Breuer studied and taught at...
, Hans Gugelot, Peter Maly – and had a major impact on German and international design. In 1968 he took a leading position at the company Elastogran in Lemförde in southern Lower Saxony, where he was responsible for the development of products made from polyurethane
Polyurethane
A polyurethane is any polymer composed of a chain of organic units joined by carbamate links. Polyurethane polymers are formed through step-growth polymerization, by reacting a monomer with another monomer in the presence of a catalyst.Polyurethanes are...
. Owner of the company Gottfried Reuter, former chemist at Bayer in Leverkusen, was an expert in the field of polyurethane production, for which he held several patents. In the 1960s he formed a company group (with a turnover of a few hundred million Deutschmarks based on these patents).
Between 1968 and 1972 Peter Ghyczy developed many innovative designs, which identified him as one of the most productive designers of these years. In 1970 the Design-Center in Lemförde was inaugurated, build according to Ghyczy's design, made completely from polyurethane and being the first of its kind. It was one of the early German design studios, whose close cooperation between product design and technical development was unheard of in the plastics industry until then. This design studio gave birth to many novel, modular components, such as shelters, facade elements but most notably various types of furniture, among them chairs, shell chairs, sectional sofas, tables, shelves and plastic door fronts for offices and kitchens.
Licenses were given to well-known companies, among others Drabert, "die Vereinigten Werkstätten", Vitra (at the time still named Fehlbaum GmbH), and Beylarian in the USA. Of all these only one model came to fame: das Gartenei from 1968, the first hinged armchair. The Design-Center was closed as early as 1972 and later demolished. Reuter sold his company to BASF and - more or less secretly - his polyurethane technology to the GDR, which was given the Gartenei along with it. This led to the fact that a chemical plant in Senftenberg produced it in unknown quantities. After the fall of the "iron curtain" it made a reappearance as "Senftenberger Ei" - often falsely seen as an East German design - in the art scene of the late 90s, where it turned into a highly desired collector's item, Peter Ghyczy now produces his own re-edition.
In 1972 he founded Ghyczy + Co Design in Viersen and presented his first furniture collection. It was based on casting techniques which he transferred from plastics to metal. He patented many of his developments, especially for his innovative method clamping glass and metal together. He used this technique for a new type of "frameless" table, which has often been copied and which he used as a basis for an entire product line. Finally the also patented "frameless" shelf R03 came around which has long made its way - as plagiarism - into many furniture stores.
Peter Ghyczy designed numerous lamps, for example the series MegaWatt and the table lamp MW 17, a curved, balanced tabular steel Rohr; another "frameless" construction - an idea, which resembles a famous piece in design history, the "legless" "Freischwinger" presented by Mart Stamm and Ludwig Mies van der Rohe in 1927. Peter Ghyczy often used casted metal parts. This methode derives from his early experiences with plastic castings.
In 1974 Peter Ghyczy moved his company to the Netherlands. In 1985 it moved to Swalmen, where it remains until today.