Hydraulic clearance. Flow in narrow clearances are of vital importance in hydraulic system component design. The flow in a narrow circular clearance of a spool valve can be calculated according to the formula below if the height is negligible compared to the width of the clearance, such as most of the clearances in hydraulic pump

Hydraulic pump

Hydraulic pumps are used in hydraulic drive systems and can be hydrostatic or hydrodynamic.Hydrostatic pumps are positive displacement pumps while hydrodynamic pumps can be fixed displacement pumps, in which the displacement cannot be adjusted, or variable displacement pumps, which have a more...

s, hydraulic motor

Hydraulic motor

A hydraulic motor is a mechanical actuator that converts hydraulic pressure and flow into torque and angular displacement . The hydraulic motor is the rotary counterpart of the hydraulic cylinder....

s, and spool valves. Flow is considered to be laminar. The formula below is valid for a spool valve when the spool is steady.

Concentric spool/valve housing position i.e. the height/radial clearance c is the same all around:

Flow Q_i = (∆P · π · d · c³) ÷ (12 · ν · ρ · L) where:

ΔP = P1-P2 = pressure drop over the clearance

d = valve spool diameter

c = clearance height (radial clearance)

ν = kinematic viscosity for the oil

ρ = density for the oil

L = clearance length

As can be seen from the formula, the clearance height c has much more influence on the leakage than the length.

Contact between the spool and the wall, the value that is generally used for practical calculations:

Flow Q_e = 2.5 · Qi