Hornet (car)
Encyclopedia
The Hornet is a Lotus Seven
copy built by T&J Sportscars. The Hornet was created by T&J Sportscars and was designed to take the majority of components from the Ford Cortina
mk 3, 4 or 5. This means there is a choice of 1300/ 1600 OHV Kent or OHC 1600/2000 OHC Pinto Ford engines. All the running gear is taken from the Cortina, although T&J manufactured front wishbones were an option to replace the Cortina pressed steel items. The only items that need to be modified are the propshaft, which needs to be shortened, and the alternator that needs to be repositioned.
The body tub uses the same concept as the earlier Locust
, and is built from ¾” plywood, using plans supplied by the manufacturer. The wooden tub is then skinned with thin gauge aluminium sheet. The tub is fitted to a ladder chassis supplied by the manufacturer. Unlike the Locust where most other Seven style body components will fit the size of the Hornet meant that the builder is limited to items provided by the manufacturer.
Specification
The Hornet is now manufactured by BWE Sportscars and like the Locust can be built using Ford Sierra components.
Lotus Seven
The Lotus Seven is a small, simple, lightweight two-seater open-top sports car produced by Lotus Cars between 1957 and 1972....
copy built by T&J Sportscars. The Hornet was created by T&J Sportscars and was designed to take the majority of components from the Ford Cortina
Ford Cortina
As the 1960s dawned, BMC were revelling in the success of their new Mini – the first successful true minicar to be built in Britain in the postwar era...
mk 3, 4 or 5. This means there is a choice of 1300/ 1600 OHV Kent or OHC 1600/2000 OHC Pinto Ford engines. All the running gear is taken from the Cortina, although T&J manufactured front wishbones were an option to replace the Cortina pressed steel items. The only items that need to be modified are the propshaft, which needs to be shortened, and the alternator that needs to be repositioned.
The body tub uses the same concept as the earlier Locust
Locust (car)
Locust is a kit car inspired by the Lotus 7.The Locust Seven differs from most other Lotus / kit cars in that it does not use a space frame chassis, but a ladder frame and a body constructed from three 8ft by 4ft sheets of 3/4" thick exterior grade or marine plywood alternatively MDF sheets...
, and is built from ¾” plywood, using plans supplied by the manufacturer. The wooden tub is then skinned with thin gauge aluminium sheet. The tub is fitted to a ladder chassis supplied by the manufacturer. Unlike the Locust where most other Seven style body components will fit the size of the Hornet meant that the builder is limited to items provided by the manufacturer.
Specification
- Donor vehicle – Cortina MK3,4,5
- Chassis – Twin rail ladder in RHS with suspension points body outriggers and roll bar plinths.
- Front Suspension – Cortina wishbones with optional tubular wishbones allowing full castor/camber adjustment.
- Rear Suspension - Cortina four link suspension using donor springs and shock absorbers.
- Engine – Normally Cortina but most RWD engine and gearbox combinations including Rover V8 can be accommodated.
- Build time – Estimated 360 hours.
The Hornet is now manufactured by BWE Sportscars and like the Locust can be built using Ford Sierra components.