A grounding kit / earthing kit can be described as a kind of lightning protector which avoids lightning punctures on cables. It is used for grounding /earthing coaxial cable

Coaxial cable

Coaxial cable, or coax, has an inner conductor surrounded by a flexible, tubular insulating layer, surrounded by a tubular conducting shield. The term coaxial comes from the inner conductor and the outer shield sharing the same geometric axis...

s of copper

Copper

Copper is a chemical element with the symbol Cu and atomic number 29. It is a ductile metal with very high thermal and electrical conductivity. Pure copper is soft and malleable; an exposed surface has a reddish-orange tarnish...

 or aluminium

Aluminium

Aluminium or aluminum is a silvery white member of the boron group of chemical elements. It has the symbol Al, and its atomic number is 13. It is not soluble in water under normal circumstances....

 on antenna installations for telecommunication

Telecommunication

Telecommunication is the transmission of information over significant distances to communicate. In earlier times, telecommunications involved the use of visual signals, such as beacons, smoke signals, semaphore telegraphs, signal flags, and optical heliographs, or audio messages via coded...

 (mobile communications).

Construction

Grounding kits / Earthing kits are composed of two main components, a clamp and a cable. The clamp will be screwed on a coaxial cable and in case of lightning strokes in the antenna installation, the voltage will be diverted over a ripple in the clamp with the combined cable and will be earthed / grounded by this way.

The clamps of the grounding kits / earthing kits are composed of a ozone

Ozone

Ozone , or trioxygen, is a triatomic molecule, consisting of three oxygen atoms. It is an allotrope of oxygen that is much less stable than the diatomic allotrope...

- and UV

Ultraviolet

Ultraviolet light is electromagnetic radiation with a wavelength shorter than that of visible light, but longer than X-rays, in the range 10 nm to 400 nm, and energies from 3 eV to 124 eV...

-resistant rubber coat with a device where the ripple can be lodged. The tin-plated ripple with a special alloying enables the bridging over big tolerances between kit and coaxial cable which is important for a best possible voltage transmission. The ripple to the skinned coaxial cable has a low contact resistance of 0.1 up to 0.15 mΩ. It also enables a better length compensation as well as even and low contact pressures, which avoids damages on the coaxial cable. These characteristics are known as relaxation behaviour.

Assembly

For assembling a grounding kit / earthing kit with integrated cable lug the coaxial cable is skinned, the grounding kit / earthing kit is set and tightened by a screw.