Genezareth, Hallum
Encyclopedia
Genezareth or Kloosterpoldermolen is a smock mill in Hallum
Hallum
Hallum is a small village in the province of Friesland, the Netherlands. It is part of the municipality of Ferwerderadiel. The primary language spoken there is Frisian. Hallum is also a relatively uncommon family name. There was a station on the North Friesland Railway which opened in 1901 and...

, Friesland
Friesland
Friesland is a province in the north of the Netherlands and part of the ancient region of Frisia.Until the end of 1996, the province bore Friesland as its official name. In 1997 this Dutch name lost its official status to the Frisian Fryslân...

, Netherlands
Netherlands
The Netherlands is a constituent country of the Kingdom of the Netherlands, located mainly in North-West Europe and with several islands in the Caribbean. Mainland Netherlands borders the North Sea to the north and west, Belgium to the south, and Germany to the east, and shares maritime borders...

 which was built in 1850 and has been restored to working order. The mill is listed as a Rijksmonument
Rijksmonument
A rijksmonument is a National Heritage Site of the Netherlands, listed by the agency Rijksdienst voor het Cultureel Erfgoed acting for the Dutch Ministry of Education, Culture and Science.-History and criteria:...

, number 15642.

History

Genezareth was buil in 1850 by millwright
Millwright
A millwright is a craftsman or tradesman engaged with the construction and maintenance of machinery.Early millwrights were specialist carpenters who erected machines used in agriculture, food processing and processing lumber and paper...

 H de Vries to drain the Genezareth-Kloosterpolder. Restorations were undertaken in 1958 and 1962. On 4 May 1976, the mill was sold to Stichting De Fryske Mole (Frisian Mills Society) A further restoration was undertaken in 1980. In 2006, the mill was officially designated as being in reserve should it be required to drain the polder.

Description

Genezareth is what the Dutch describe as a Grondzeiler. It is a three storey smock mill on a single storey brick base.There is no stage, the sails reaching down almost to the ground. The smock and cap are thatched. The cap is winded by tailpole and winch. The sails are Common sails, they have a span of 15.92 metre. The sails are carried on a cast iron windshaft, which was cast by H J Koening of Foxham, Groningen
Groningen (province)
Groningen [] is the northeasternmost province of the Netherlands. In the east it borders the German state of Niedersachsen , in the south Drenthe, in the west Friesland and in the north the Wadden Sea...

in 1900. The windshaft carries the brake wheel, which has 47 cogs. This drives the wallower (25 cogs) at the top of the upright shaft. At the bottom of the upright shaft, a crown wheel with 35 cogs drives a gear with 35 cogs on the axle of the Archimedes screw. The axle of the Archimedes screw is 340 millimetres (13¼ in) diameter. The Archimedes screw is 1.29 metre diameter and 3.86 metre long. It is inclined at an angle of 17½°. Each revolution of the Archimedes screw lifts 600 litres (132 imp gal) of water.
The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK