Cuttlebone
Encyclopedia
Cuttlebone, also known as cuttlefish bone, is a hard, brittle internal structure found in all members of the family
Sepiidae
, commonly known as cuttlefish
.
Cuttlebone is composed primarily of aragonite
. It is a chambered, gas-filled shell used for buoyancy
control; its siphuncle
is highly modified and is on the ventral side of the shell. The microscopic structure of cuttlebone consists of narrow layers connected by numerous upright pillars.
Depending on the species, cuttlebones implode at a depth of 200 to 600 m (656.2 to 1,968.5 ft). Because of this limitation, most species of cuttlefish live on the seafloor in shallow water, usually on the continental shelf
.
, and used as an antacid
or as an absorbent.
Today, cuttlebones are commonly used as calcium
-rich dietary supplements for caged bird
s, chinchilla
s, hermit crab
s, and reptile
s.
Jewelers prepare cuttlebone for use as a mold by cutting it in half and rubbing the two sides together until they fit flush against one another. Then the casting can be done by carving a design into the cuttlebone, adding the necessary sprue, melting the metal in a separate pouring crucible, and pouring the molten metal into the mold through the sprue. Finally, the sprue is sawed off and the finished piece is polished.
Family (biology)
In biological classification, family is* a taxonomic rank. Other well-known ranks are life, domain, kingdom, phylum, class, order, genus, and species, with family fitting between order and genus. As for the other well-known ranks, there is the option of an immediately lower rank, indicated by the...
Sepiidae
Sepiidae
Sepiidae is a family of cephalopods in the order Sepiida.-Classification:*Order Sepiida: cuttlefish**Family Sepiadariidae**Family Sepiidae***Genus Metasepia****Metasepia pfefferi, Pfeffer's Flamboyant Cuttlefish...
, commonly known as cuttlefish
Cuttlefish
Cuttlefish are marine animals of the order Sepiida. They belong to the class Cephalopoda . Despite their name, cuttlefish are not fish but molluscs....
.
Cuttlebone is composed primarily of aragonite
Aragonite
Aragonite is a carbonate mineral, one of the two common, naturally occurring, crystal forms of calcium carbonate, CaCO3...
. It is a chambered, gas-filled shell used for buoyancy
Buoyancy
In physics, buoyancy is a force exerted by a fluid that opposes an object's weight. In a column of fluid, pressure increases with depth as a result of the weight of the overlying fluid. Thus a column of fluid, or an object submerged in the fluid, experiences greater pressure at the bottom of the...
control; its siphuncle
Siphuncle
The siphuncle is a strand of tissue passing longitudinally through the shell of a cephalopod mollusk. Only cephalopods with chambered shells have siphuncles, such as the extinct ammonites and belemnites, and the living nautiluses, cuttlefish, and Spirula...
is highly modified and is on the ventral side of the shell. The microscopic structure of cuttlebone consists of narrow layers connected by numerous upright pillars.
Depending on the species, cuttlebones implode at a depth of 200 to 600 m (656.2 to 1,968.5 ft). Because of this limitation, most species of cuttlefish live on the seafloor in shallow water, usually on the continental shelf
Continental shelf
The continental shelf is the extended perimeter of each continent and associated coastal plain. Much of the shelf was exposed during glacial periods, but is now submerged under relatively shallow seas and gulfs, and was similarly submerged during other interglacial periods. The continental margin,...
.
Human uses
In the past, cuttlebones were used in making polishing powder. The powder was added to toothpasteToothpaste
Toothpaste is a paste or gel dentifrice used with a toothbrush as an accessory to clean and maintain the aesthetics and health of teeth. Toothpaste is used to promote oral hygiene: it serves as an abrasive that aids in removing the dental plaque and food from the teeth, assists in suppressing...
, and used as an antacid
Antacid
An antacid is a substance which neutralizes stomach acidity.-Mechanism of action:Antacids perform a neutralization reaction, increasing the pH to reduce acidity in the stomach. When gastric hydrochloric acid reaches the nerves in the gastrointestinal mucosa, they signal pain to the central nervous...
or as an absorbent.
Today, cuttlebones are commonly used as calcium
Calcium
Calcium is the chemical element with the symbol Ca and atomic number 20. It has an atomic mass of 40.078 amu. Calcium is a soft gray alkaline earth metal, and is the fifth-most-abundant element by mass in the Earth's crust...
-rich dietary supplements for caged bird
Bird
Birds are feathered, winged, bipedal, endothermic , egg-laying, vertebrate animals. Around 10,000 living species and 188 families makes them the most speciose class of tetrapod vertebrates. They inhabit ecosystems across the globe, from the Arctic to the Antarctic. Extant birds range in size from...
s, chinchilla
Chinchilla
Chinchillas are crepuscular rodents, slightly larger and more robust than ground squirrels, and are native to the Andes mountains in South America. Along with their relatives, viscachas, they make up the family Chinchillidae....
s, hermit crab
Hermit crab
Hermit crabs are decapod crustaceans of the superfamily Paguroidea. Most of the 1100 species possess an asymmetrical abdomen which is concealed in an empty gastropod shell that is carried around by the hermit crab.-Description:...
s, and reptile
Reptile
Reptiles are members of a class of air-breathing, ectothermic vertebrates which are characterized by laying shelled eggs , and having skin covered in scales and/or scutes. They are tetrapods, either having four limbs or being descended from four-limbed ancestors...
s.
Jewelry making
Because cuttlebone is able to withstand high temperatures and is easily carved, it serves as mold-making material for small metal casting for the creation of jewelry and small sculptural objects.Jewelers prepare cuttlebone for use as a mold by cutting it in half and rubbing the two sides together until they fit flush against one another. Then the casting can be done by carving a design into the cuttlebone, adding the necessary sprue, melting the metal in a separate pouring crucible, and pouring the molten metal into the mold through the sprue. Finally, the sprue is sawed off and the finished piece is polished.