Countercurrent chromatography
Encyclopedia
Countercurrent chromatography (CCC) or partition chromatography is a category of chromatography
techniques; laboratory techniques for the separation of mixtures, in this case liquid-liquid mixtures.
. The components can then be analyzed separately by various sorts of detectors which may or may not be integrated into an apparatus. Partition chromatography is based on differences in capacity factor, k, and distribution coefficient, Kd, of the analyte
s using liquid stationary and mobile liquid phase. An analyte is the substance or chemical constituent that is being analyzed.
Standard column chromatography
uses a solid stationary phase and a liquid mobile phase, while gas chromatography (GC) uses a liquid stationary phase on a solid support and a gaseous mobile phase. By contrast, in liquid-liquid chromatography, both the mobile and stationary phases are liquid.
By eliminating solid supports, permanent adsorption
of the analyte onto the column is avoided, and a near 100% recovery of the analyte can be achieved. The instrument is also easily switched between various modes of operation simply by changing solvent
s. With liquid-liquid chromatography, researchers are not limited by the composition of the columns commercially available for their instrument. Nearly any pair of immiscible solutions can be used in liquid-liquid chromatography, and most instruments can be operated in standard or reverse-phase modes.
Solvent costs are also generally cheaper than for High-performance liquid chromatography
(HPLC), and the cost of purchasing and disposing of solid adsorbents is completely eliminated. Another advantage is that experiments conducted in the laboratory can easily be scaled to industrial volumes. When GC or HPLC is carried out with large volumes, resolution is lost due to issues with surface-to-volume ratios and flow dynamics; this is avoided when both phases are liquid.
A partition coefficient
is a ratio of the amount of analyte found in each of the solvents at equilibrium and is related to the analyte's affinity for one over the other. The mobile phase is mixing with then settling from the stationary phase throughout the column. The degree of stationary phase retention (inversely proportional to the amount of stationary phase loss or "bleed" in the course of a separation) is a crucial parameter. Higher quality instruments have greater stationary phase retention. The settling time is a property of the solvent system and the sample matrix, both of which greatly influence stationary phase retention.
If a less dense mobile phase is used it will rise through the stationary phase; this is called ascending mode. The eluent from one column is transferred to another; the more columns that are used, the more theoretical plates can be achieved. The disadvantage of DCCC is that flow rates are low, and poor mixing is achieved for most binary solvent systems, which makes this technique both time-consuming and inefficient.
), which causes a variable gravity (G) field to act on the column during each rotation. This motion causes the column to see one partitioning step per revolution and components of the sample separate in the column due to their partitioning coefficient between the two immiscible liquid phases used.
HPCCC works in much the same way as HSCCC but with one vital difference. A seven-year R&D process that has produced HPCCC instruments that generated 240 g, compared to the 80 g of the HSCCC machines. This increase in g-level and larger bore of the column has enabled a tenfold increase in through put, due to improved mobile phase flow rates and a much higher stationary phase retention.
Countercurrent chromatography is a preparative liquid chromatography technique, however with the advent of the higher g HPCCC instruments it is now prossible to operate instruments with sample loadings as low as a few milligrams, whereas in the past 100s of milligrams have been necessary.
Major application areas for this technique include natural products purification and also drug development.
and the many possible column geometries it can support. These devices make use of a little-known means of making non-rotating connections between the stator and the rotor of a centrifuge. (It is beyond the scope of this discussion to describe the method of accomplishing this. Any of the several books available on CCC discuss it thoroughly.)
Functionally, the high-speed CCC consists of a helical coil of inert tubing which rotates on its planetary axis and simultaneously rotates eccentrically about another solar axis. (These axes can be made to coincide, but the most common or type J CCC is discussed here.) The effect is to create zones of mixing and zones of settling which progress along the helical coil at dizzying speed. This produces a highly favorable environment for chromatography.
There are numerous potential variants upon this instrument design. The most significant of these is the toroidal CCC. This instrument does not employ planetary motion. In some respects it is very like CPC, but retains the advantage of not needing rotary seals. It also employs a capillary tube instead of the larger-diameter tubes employed in the helices of the other CCC models. This capillary passage makes the mixing of two phases very thorough, despite the lack of shaking or other mixing forces. This instrument provides rapid analytical-scale separations, which can nonetheless be scaled up to either of the larger-scale CCC instruments.
Xanthanolide purification
to speed separation and achieves higher flow rates than DCCC (which relies on gravity).
The centrifugal partition chromatograph is constituted with a unique rotor (=column). This rotor rotates on its central axis (while HSCCC column rotates on its planetary axis and simultaneously rotates eccentrically about another solar axis). With less vibrations and noise, the CPC offers a wider rotation speed range (from 500 to 2000 rpm) than HSCCC. That allows a better decantation and retention for unstable biphasic system (e.g., aqueous aqueous systems or Butanol/water systems).
Basics of CPC:
The CPC rotor is constituted by the superposition of disks engraved with small cells connected by head / tail ducts. These cells, where the chromatographic separation takes place, can be compared to lined-up separate funnels.
The rotor is filled with the stationary phase, which stays inside the rotor thanks to the rotation speed, while the mobile phase is pumped through.
CPC can be operated in either descending or ascending mode, where the direction is relative to the force generated by the rotor rather than gravity.
According to the fast and permanent evolution of the cells design, the efficiency and flow rate with low back pressure are improved. The CPC offers now the direct scale up from the analytical apparatuses (few milliliters) to industrial apparatuses (some liters) for fast batch production.
Chromatography
Chromatography is the collective term for a set of laboratory techniques for the separation of mixtures....
techniques; laboratory techniques for the separation of mixtures, in this case liquid-liquid mixtures.
Chromatography
Chromatography in general is used to separate components of a mixture based on their differing affinities for mobile and stationary phases of a columnColumn chromatography
Column chromatography in chemistry is a method used to purify individual chemical compounds from mixtures of compounds. It is often used for preparative applications on scales from micrograms up to kilograms.The main advantage of column chromatography is the relatively low cost and disposability...
. The components can then be analyzed separately by various sorts of detectors which may or may not be integrated into an apparatus. Partition chromatography is based on differences in capacity factor, k, and distribution coefficient, Kd, of the analyte
Analyte
An analyte, or component , is a substance or chemical constituent that is of interest in an analytical procedure. Grammatically, it is important to note that experiments always seek to measure properties of analytes—and that analytes themselves can never be measured. For instance, one cannot...
s using liquid stationary and mobile liquid phase. An analyte is the substance or chemical constituent that is being analyzed.
Standard column chromatography
Column chromatography
Column chromatography in chemistry is a method used to purify individual chemical compounds from mixtures of compounds. It is often used for preparative applications on scales from micrograms up to kilograms.The main advantage of column chromatography is the relatively low cost and disposability...
uses a solid stationary phase and a liquid mobile phase, while gas chromatography (GC) uses a liquid stationary phase on a solid support and a gaseous mobile phase. By contrast, in liquid-liquid chromatography, both the mobile and stationary phases are liquid.
By eliminating solid supports, permanent adsorption
Adsorption
Adsorption is the adhesion of atoms, ions, biomolecules or molecules of gas, liquid, or dissolved solids to a surface. This process creates a film of the adsorbate on the surface of the adsorbent. It differs from absorption, in which a fluid permeates or is dissolved by a liquid or solid...
of the analyte onto the column is avoided, and a near 100% recovery of the analyte can be achieved. The instrument is also easily switched between various modes of operation simply by changing solvent
Solvent
A solvent is a liquid, solid, or gas that dissolves another solid, liquid, or gaseous solute, resulting in a solution that is soluble in a certain volume of solvent at a specified temperature...
s. With liquid-liquid chromatography, researchers are not limited by the composition of the columns commercially available for their instrument. Nearly any pair of immiscible solutions can be used in liquid-liquid chromatography, and most instruments can be operated in standard or reverse-phase modes.
Solvent costs are also generally cheaper than for High-performance liquid chromatography
High-performance liquid chromatography
High-performance liquid chromatography , HPLC, is a chromatographic technique that can separate a mixture of compounds and is used in biochemistry and analytical chemistry to identify, quantify and purify the individual components of the mixture.HPLC typically utilizes different types of stationary...
(HPLC), and the cost of purchasing and disposing of solid adsorbents is completely eliminated. Another advantage is that experiments conducted in the laboratory can easily be scaled to industrial volumes. When GC or HPLC is carried out with large volumes, resolution is lost due to issues with surface-to-volume ratios and flow dynamics; this is avoided when both phases are liquid.
Techniques
CCC can be thought of as occurring in three stages: mixing, settling, and separation (although they often occur continuously). Mixing of the phases is necessary so that the interface between them has a large area, and the analyte can move between the phases according to its partition coefficient.A partition coefficient
Partition coefficient
In chemistry and the pharmaceutical sciences, a partition- or distribution coefficient is the ratio of concentrations of a compound in the two phases of a mixture of two immiscible solvents at equilibrium. The terms "gas/liquid partition coefficient" and "air/water partition coefficient" are...
is a ratio of the amount of analyte found in each of the solvents at equilibrium and is related to the analyte's affinity for one over the other. The mobile phase is mixing with then settling from the stationary phase throughout the column. The degree of stationary phase retention (inversely proportional to the amount of stationary phase loss or "bleed" in the course of a separation) is a crucial parameter. Higher quality instruments have greater stationary phase retention. The settling time is a property of the solvent system and the sample matrix, both of which greatly influence stationary phase retention.
Droplet Countercurrent Chromatography (DCCC)
Droplet CCC is the oldest form of CCC. It uses only gravity to move the mobile phase through the stationary phase. In descending mode, droplets of the denser mobile phase and sample are allowed to fall through a column of the lighter stationary phase using only gravity.If a less dense mobile phase is used it will rise through the stationary phase; this is called ascending mode. The eluent from one column is transferred to another; the more columns that are used, the more theoretical plates can be achieved. The disadvantage of DCCC is that flow rates are low, and poor mixing is achieved for most binary solvent systems, which makes this technique both time-consuming and inefficient.
High-Performance Countercurrent Chromatography (HPCCC)
The operating principle of CCC equipment requires a column consisting of a tube coiled around a bobbin. The bobbin is rotated in a double-axis gyratory motion (a cardioidCardioid
A cardioid is a plane curve traced by a point on the perimeter of a circle that is rolling around a fixed circle of the same radius. It is therefore a type of limaçon and can also be defined as an epicycloid having a single cusp...
), which causes a variable gravity (G) field to act on the column during each rotation. This motion causes the column to see one partitioning step per revolution and components of the sample separate in the column due to their partitioning coefficient between the two immiscible liquid phases used.
HPCCC works in much the same way as HSCCC but with one vital difference. A seven-year R&D process that has produced HPCCC instruments that generated 240 g, compared to the 80 g of the HSCCC machines. This increase in g-level and larger bore of the column has enabled a tenfold increase in through put, due to improved mobile phase flow rates and a much higher stationary phase retention.
Countercurrent chromatography is a preparative liquid chromatography technique, however with the advent of the higher g HPCCC instruments it is now prossible to operate instruments with sample loadings as low as a few milligrams, whereas in the past 100s of milligrams have been necessary.
Major application areas for this technique include natural products purification and also drug development.
High-Speed Countercurrent Chromatography (HSCCC)
The modern era of CCC began with the development by Dr. Yoichiro Ito of the planetary centrifugeCentrifuge
A centrifuge is a piece of equipment, generally driven by an electric motor , that puts an object in rotation around a fixed axis, applying a force perpendicular to the axis...
and the many possible column geometries it can support. These devices make use of a little-known means of making non-rotating connections between the stator and the rotor of a centrifuge. (It is beyond the scope of this discussion to describe the method of accomplishing this. Any of the several books available on CCC discuss it thoroughly.)
Functionally, the high-speed CCC consists of a helical coil of inert tubing which rotates on its planetary axis and simultaneously rotates eccentrically about another solar axis. (These axes can be made to coincide, but the most common or type J CCC is discussed here.) The effect is to create zones of mixing and zones of settling which progress along the helical coil at dizzying speed. This produces a highly favorable environment for chromatography.
There are numerous potential variants upon this instrument design. The most significant of these is the toroidal CCC. This instrument does not employ planetary motion. In some respects it is very like CPC, but retains the advantage of not needing rotary seals. It also employs a capillary tube instead of the larger-diameter tubes employed in the helices of the other CCC models. This capillary passage makes the mixing of two phases very thorough, despite the lack of shaking or other mixing forces. This instrument provides rapid analytical-scale separations, which can nonetheless be scaled up to either of the larger-scale CCC instruments.
Xanthanolide purification
Centrifugal Partition Chromatography (CPC)
Centrifugal Partition Chromatography (CPC) was invented in the eighties by the Japanese company Sanki Engineering Ltd, whose president was the late Kanichi Nunogaki. CPC has been extensively developed in France starting from the late nineties. CPC uses centrifugal forceCentrifugal force
Centrifugal force can generally be any force directed outward relative to some origin. More particularly, in classical mechanics, the centrifugal force is an outward force which arises when describing the motion of objects in a rotating reference frame...
to speed separation and achieves higher flow rates than DCCC (which relies on gravity).
The centrifugal partition chromatograph is constituted with a unique rotor (=column). This rotor rotates on its central axis (while HSCCC column rotates on its planetary axis and simultaneously rotates eccentrically about another solar axis). With less vibrations and noise, the CPC offers a wider rotation speed range (from 500 to 2000 rpm) than HSCCC. That allows a better decantation and retention for unstable biphasic system (e.g., aqueous aqueous systems or Butanol/water systems).
Basics of CPC:
The CPC rotor is constituted by the superposition of disks engraved with small cells connected by head / tail ducts. These cells, where the chromatographic separation takes place, can be compared to lined-up separate funnels.
The rotor is filled with the stationary phase, which stays inside the rotor thanks to the rotation speed, while the mobile phase is pumped through.
CPC can be operated in either descending or ascending mode, where the direction is relative to the force generated by the rotor rather than gravity.
According to the fast and permanent evolution of the cells design, the efficiency and flow rate with low back pressure are improved. The CPC offers now the direct scale up from the analytical apparatuses (few milliliters) to industrial apparatuses (some liters) for fast batch production.
Modes of Operation
- Reverse phase - Aqueous phase mobile - The denser phase is pumped through as the mobile phase.
- Normal phase - Organic phase mobile - The less dense phase is used as the mobile phase.
- Dual-Mode: The mobile and stationary phases are reversed part way through the run.
- Gradient Mode: The concentration of one or more components in the mobile phase is varied throughout the run to achieve optimal resolution across a wider range of polarities. For example, a methanol-water gradient may be employed using pure heptane as the stationary phase. This is not possible with all binary systems, due to excessive loss of stationary phase.
- Elution Extrusion Mode (EECCC): The mobile phase is extruded after a certain point by switching the phase being pumped into the system. For example, during the Elution portion of a separation using an EtOAc-water system running head to tail, the aqueous mobile phase is being pumped into the system, . In order to switch to extrusion mode, organic phase is pumped into the system. This can be accomplished either with a valve on the inlet of single pump, or ideally with an integrated system of two or three pumps, each dedicated either to a single phase of a binary mixture, or to an intermediate wash solvent. This also allows for good resolution of compounds with high mobile-phase affinities. It requires only one column volume of solvent and leaves the column full of fresh stationary phase.
- pH Zone Refining: Acidic and basicBase (chemistry)For the term in genetics, see base A base in chemistry is a substance that can accept hydrogen ions or more generally, donate electron pairs. A soluble base is referred to as an alkali if it contains and releases hydroxide ions quantitatively...
solvents are used to elute analytes based on their pKaPKAPKA, pKa, or other similar variations may stand for:* pKa, the symbol for the acid dissociation constant at logarithmic scale* Protein kinase A, a class of cAMP-dependent enzymes* Pi Kappa Alpha, the North-American social fraternity...
.