Cadence braking
Encyclopedia
Cadence braking or stutter braking is an advanced driving technique used to allow a car to both steer and brake on a slippery surface. It is used to effect an emergency stop
where traction is limited, to reduce the effect of skidding from road wheels locking up under braking. This can be a particular problem when different tyres have different traction, such as on patchy ice for example. Its use in an emergency requires a presence of mind that the situation itself might preclude. Cadence braking is supposed to maximise the time for the driver to steer around the obstacle ahead, as it allows him to steer while slowing. It needs to be learned and practiced. For most drivers of modern cars, it has been entirely superseded by ABS
, however it is still a valuable skill for drivers of non-ABS equipped vehicles such as classic car
s or economy car
s.
Maximum braking force is obtained when there is approximately 10%-20% slippage
between the braked wheel's rotational speed and the road surface. Beyond this point, rolling grip diminishes rapidly and sliding friction provides a greater proportion of the force that slows the vehicle. Due to local heating and melting of the tyres
, the sliding friction can be very low. When braking at, or beyond, the peak braking force the steering is ineffective since the grip of the tyre is entirely consumed in braking the vehicle.
Cadence braking involves pumping the brake
pedal fairly rapidly but deliberately, to make the wheels lock and unlock. It can be approximated by the following steps:
Anti-lock braking system performs these operations automatically many times per second in rapid succession. A human driver can perform one lock-release cycle per second with practice.
This is done primarily to maintain steering control, at least in part. In wet, hard surfaces, this is useful to reduce somewhat total braking distance. When ABS is present the best emergency stop will usually be obtained by simply pressing very hard on the brakes, forcing the ABS to perform, and steering to avoid the obstacles ahead.
Cadence braking (or any other type of braking) will not help much on extremely slippery surfaces such as ice (in theory it would, but in practice the ice can be so slippery that it makes little difference — a winter tire would make more difference). Also, on very loose surfaces, a quicker stop can be achieved by simply locking the wheels, causing a wedge of loose material to build up ahead of the wheels and create a substantial braking force. This is useful only when stopping in a straight line, because locking the wheels means all steering control would be lost. In such conditions, ABS actually increases the stopping distances. On poor surfaces, in the past, rally drivers timed the pulsing of brake application so as to take advantage of the load transfer as the vehicle pitches forwards and backwards in response to the initial braking effort. With modern overdamped, stiffly sprung suspensions this is less likely to be effective.
While cadence braking is effective on most surfaces, it is less effective at slowing the vehicle than keeping the tires continually at the optimum braking point which is called threshold braking
. The latter is an expert driving technique that is even more difficult to learn than cadence braking, and again has been largely superseded by ABS.
Threshold braking, or a good ABS, generally results in the shortest stopping distance in a straight line. ABS, cadence and interference braking are intended to preserve steering control while braking.
Emergency stop
-United Kingdom driving test:For the practical section of the driving test, an examiner will often request the candidate to perform an emergency stop. This is done in order to evaluate how well a candidate can react to a dangerous situation and bring their motor vehicle to a safe stop. This is to...
where traction is limited, to reduce the effect of skidding from road wheels locking up under braking. This can be a particular problem when different tyres have different traction, such as on patchy ice for example. Its use in an emergency requires a presence of mind that the situation itself might preclude. Cadence braking is supposed to maximise the time for the driver to steer around the obstacle ahead, as it allows him to steer while slowing. It needs to be learned and practiced. For most drivers of modern cars, it has been entirely superseded by ABS
Anti-lock braking system
An anti-lock braking system is a safety system that allows the wheels on a motor vehicle to continue interacting tractively with the road surface as directed by driver steering inputs while braking, preventing the wheels from locking up and therefore avoiding skidding.An ABS generally offers...
, however it is still a valuable skill for drivers of non-ABS equipped vehicles such as classic car
Classic car
A classic car is an older car; the exact meaning is variable. The Classic Car Club of America maintains that a car must be between 20 and 40 years old to be a classic, while cars over 45 years fall into the Antique Class.- Classic Car Club of America :...
s or economy car
Economy car
An economy car is an automobile that is designed for low cost operation. Typical economy cars are small, light weight, and inexpensive to buy. Economy car designers are forced by stringent design constraints to be inventive...
s.
Maximum braking force is obtained when there is approximately 10%-20% slippage
Slip (vehicle dynamics)
In vehicle dynamics, slip is the relative motion between a tire and the road surface it is moving on. This slip can be generated either by the tire's rotational speed being greater or less than the free-rolling speed , or by the tire's plane of rotation being at an angle to its direction of...
between the braked wheel's rotational speed and the road surface. Beyond this point, rolling grip diminishes rapidly and sliding friction provides a greater proportion of the force that slows the vehicle. Due to local heating and melting of the tyres
Tire
A tire or tyre is a ring-shaped covering that fits around a wheel rim to protect it and enable better vehicle performance by providing a flexible cushion that absorbs shock while keeping the wheel in close contact with the ground...
, the sliding friction can be very low. When braking at, or beyond, the peak braking force the steering is ineffective since the grip of the tyre is entirely consumed in braking the vehicle.
Cadence braking involves pumping the brake
Brake
A brake is a mechanical device which inhibits motion. Its opposite component is a clutch. The rest of this article is dedicated to various types of vehicular brakes....
pedal fairly rapidly but deliberately, to make the wheels lock and unlock. It can be approximated by the following steps:
- Press the brake pedal until wheels lock up. On dry, hard pavement you will start to hear a squealing sound. On loose or slippery surfaces you will start to hear a swashing sound.
- Reduce brake pedal pressure for the locked up wheels to regain traction and start rotating again. Note that on slippery pavement you will have to lift your foot almost entirely to regain wheel rotation.
- Lower your foot again to increase brake pressure until the wheels lock up the second time, then lift it again to release pressure and unlock.
- Lower your foot again to lock up the wheels the third time, then release to unlock once more.
- Continue pumping the brakes in this fashion until the vehicle stops or the danger is over.
Anti-lock braking system performs these operations automatically many times per second in rapid succession. A human driver can perform one lock-release cycle per second with practice.
This is done primarily to maintain steering control, at least in part. In wet, hard surfaces, this is useful to reduce somewhat total braking distance. When ABS is present the best emergency stop will usually be obtained by simply pressing very hard on the brakes, forcing the ABS to perform, and steering to avoid the obstacles ahead.
Cadence braking (or any other type of braking) will not help much on extremely slippery surfaces such as ice (in theory it would, but in practice the ice can be so slippery that it makes little difference — a winter tire would make more difference). Also, on very loose surfaces, a quicker stop can be achieved by simply locking the wheels, causing a wedge of loose material to build up ahead of the wheels and create a substantial braking force. This is useful only when stopping in a straight line, because locking the wheels means all steering control would be lost. In such conditions, ABS actually increases the stopping distances. On poor surfaces, in the past, rally drivers timed the pulsing of brake application so as to take advantage of the load transfer as the vehicle pitches forwards and backwards in response to the initial braking effort. With modern overdamped, stiffly sprung suspensions this is less likely to be effective.
While cadence braking is effective on most surfaces, it is less effective at slowing the vehicle than keeping the tires continually at the optimum braking point which is called threshold braking
Threshold braking
Threshold braking or limit braking is a driving technique most commonly used in motor racing, but also practiced in road vehicles to slow a vehicle at the optimum rate using the brakes....
. The latter is an expert driving technique that is even more difficult to learn than cadence braking, and again has been largely superseded by ABS.
Threshold braking, or a good ABS, generally results in the shortest stopping distance in a straight line. ABS, cadence and interference braking are intended to preserve steering control while braking.