Xtreme Skyflyer is a Skycoaster

Skycoaster

Skycoaster, most commonly also named Ripcord or Xtreme SkyFlyer , is an amusement park ride, produced and managed by Skycoaster, Inc....

 at several Cedar Fair parks. The Carowinds and Kings Island

Kings Island

Kings Island is a amusement park located northeast of Cincinnati in Mason, Ohio. Opened in 1972 by Taft Broadcasting Company and now owned by Cedar Fair Entertainment Company, Kings Island is the most visited seasonal amusement park in the U.S...

 models opened in 1995, while the Canada's Wonderland and Kings Dominion models opened in 1996 followed by California's Great America which opened their model in 1997. In order to ride the attraction, guests must pay an extra fee.

Structure

Xtreme Skyflyer is mainly made up of 5 parts. The first part is the "arch". This is where the cables holding the riders are attached to. The second parts are the two towers which hold the lift cables. When riders are ready to release the cable, they are at the top of either tower. The third part is the scissor lift which brings up and down riders from the cables. The fourth parts are the cables that hold the riders during the entire cycle. The final part is the lift cable which brings riders to the top of the ride giving riders the maximum experience.

Ride experience

Riders first step on to a scissor lift where they are raised into the loading position. Operators than hook the riders onto the cable which brings the riders to the top of the tower and a cable that holds the riders during the free-fall. Once the riders are securely attached to the cable the scissor left is brought down and the operators say it is safe to operate, the riders begin to be pulled to the top of the tower. Once the riders get to the top, riders must what until the operator at the bottom says to pull on the cord. The operator will usually say "Tower one / two, 3, 2, 1 fly". At the point, rider at the far right (unless there is a single rider) should pull the cord releasing them from the lift cable. At the first drop, riders can experience about 3 or 4 seconds of free-falling. After about 10 swings, an operator will lift up a hydraulic cable with a loop at the top which then a rider will have to grab and hold on to. After grabbing the cable the riders will come to a stop just above the scissor lift. The next riders will step onto the lift where the previous riders will be unloaded and they will be attached to the lift cable where entire cycle begins again. One cycle can last anywhere between 3 to 5 minutes.