Squarial
Encyclopedia
The Squarial was a satellite antenna used for reception of the now defunct British Satellite Broadcasting
television service. The Squarial was a flat plate satellite antenna, built to be unobtrusive and unique. BSB were counting on the form factor of the antenna to clearly differentiate themselves from their competitors at the time. At the time of development, satellite installations usually required an 80 cm dish in order to receive a clear signal from the transmitting satellite. The smaller antenna was BSB's unique selling point and was heavily advertised in order to attract customers to their service.
pictures could be than PAL. But MAC took a back seat when BSB unveiled the mock up Squarial, to replace the dish aerials usually needed for satellite reception. The Squarial was a surprise to everyone, including the four companies which had signed to manufacture the receivers which would have to work with the new aerial. The Squarial deal, with British company Fortel, had been struck only hours before the London event.
BSB was itself surprised at the press reaction.
Press and TV crews were in such palaver to report the news that they forgot to ask if it worked. It did not. All that existed was a wood-and-plastic dummy. Believing that someone would be able to make the Squarial work as well as a much larger dish, BSB built a whole advertising campaign on the Squarial. STC in Paignton was the first company to make a British Squarial. These were a little bigger, 38 cm across, to provide adequate reception throughout the UK, and more expensive than a dish. Due to production delays and limited availability of the STC squarial and to save face at launch, BSB sourced already available Squarials from Matsushita in Japan who were producing them in quantity for the Japanese market, industry rumours at the time of launch suggested that BSB were buying in the squarials from Matsushita for several hundred pounds each and heavily subsidising the cost to the 4 manufacturers of DMAC receiver. The Matsushita squarial was of a slightly better build quality compared to the STC design and was used by Ferguson, Philips and Tatung while ITT-Nokia supplied the STC squarial. However all offered the 30cm traditional mini dish for a slightly lower price (several dish manufacturers were used including Lenson Heath and Channel Master)
' setup. All this was engineered into a 38 cm wide plastic body, presented in white and adorned with the BSB logo at the bottom. The low-noise block converter
(LNB) was based in the center, behind the layers, and contained a simple reception unit in line with other satellite antennae of the time. It was manufactured by Matsushita and rated as a 10 GHz standard unit.
The Squarial's small size was possible thanks to the high power of the two Marcopolo DBS satellites, which simulcast the same channels on the same frequencies. The broadcast power was 59dBW, with a 0.05 degree accuracy.
Manufacturers of the DMAC receivers used with the Squarial included, Ferguson, Phillips, Nokia and Tatung.
Some owners modified the squarial to operate with the Thor satellite system (formerly BSB's own satellites, Marcopolo) after the decline of BSB. This was due in large part to the highly discounted price of the unit during the final months of BSB's existence. D2MAC programmes could be picked up from the Scandinavian satellites during the early 1990s and viewed using modified receivers. ( Latterly, once transmissions ceased from these satellites, Squarials could be used to receive broadcasts from the French terrestrial relay satellites at 5.0w.
BSB's alternative dishes have also been used successfully to tune into modern broadcast transmissions, whilst testing has been limited, analogue transmissions from the Astra & Hotbird satellites are reported to have been tuned.
The unique appearance was a design first for satellite antennae, its flat plate measured only a few millimetres thick and the LNB unit protruded another 3 cm from the rear. It was built to a very high standard, featuring good quality plastics, weather resistant coatings and stainless steel mounting arm. Compared with the amstrad setups offered by SKY — made from cheap metal — the Squarial offered a much more attractive setup.
The first revision was in the shape of a vertical ellipse of roughly 30 cm in diameter. The design employed a short LNB arm with a 'spike' design LNB operating at a frequency of 10 GHz. Essentially this design could be considered the forerunner to BSkyB's minidish. The second revision took on the appearance of a perfectly circular dish (around 25 cm in diameter), using a standard LNB at 10 GHz. In essence both function like a normal satellite dish, only scaled down.
British Satellite Broadcasting
British Satellite Broadcasting was a British television company which provided direct broadcast satellite television services to the United Kingdom...
television service. The Squarial was a flat plate satellite antenna, built to be unobtrusive and unique. BSB were counting on the form factor of the antenna to clearly differentiate themselves from their competitors at the time. At the time of development, satellite installations usually required an 80 cm dish in order to receive a clear signal from the transmitting satellite. The smaller antenna was BSB's unique selling point and was heavily advertised in order to attract customers to their service.
History
The Squarial was launched at a high profile event in MarcoPolo house, BSB's headquarters. The media were invited to a demonstration to see how much better MACMultiplexed Analogue Components
Multiplexed Analogue Components was a satellite television transmission standard, originally proposed for use on a Europe-wide terrestrial HDTV system, although it was never used terrestrially.- Technical overview :...
pictures could be than PAL. But MAC took a back seat when BSB unveiled the mock up Squarial, to replace the dish aerials usually needed for satellite reception. The Squarial was a surprise to everyone, including the four companies which had signed to manufacture the receivers which would have to work with the new aerial. The Squarial deal, with British company Fortel, had been struck only hours before the London event.
BSB was itself surprised at the press reaction.
Press and TV crews were in such palaver to report the news that they forgot to ask if it worked. It did not. All that existed was a wood-and-plastic dummy. Believing that someone would be able to make the Squarial work as well as a much larger dish, BSB built a whole advertising campaign on the Squarial. STC in Paignton was the first company to make a British Squarial. These were a little bigger, 38 cm across, to provide adequate reception throughout the UK, and more expensive than a dish. Due to production delays and limited availability of the STC squarial and to save face at launch, BSB sourced already available Squarials from Matsushita in Japan who were producing them in quantity for the Japanese market, industry rumours at the time of launch suggested that BSB were buying in the squarials from Matsushita for several hundred pounds each and heavily subsidising the cost to the 4 manufacturers of DMAC receiver. The Matsushita squarial was of a slightly better build quality compared to the STC design and was used by Ferguson, Philips and Tatung while ITT-Nokia supplied the STC squarial. However all offered the 30cm traditional mini dish for a slightly lower price (several dish manufacturers were used including Lenson Heath and Channel Master)
Technology
Technology-wise, the Squarial pioneered a system of layered circuitry, effectively thin sheets of plastic embedded with the conductive reception nodes. Three of these sheets were stacked upon each other, padded with polystyrene layers to add rigidity to the unit. This is now commonly known as a 'phased arrayPhased array
In wave theory, a phased array is an array of antennas in which the relative phases of the respective signals feeding the antennas are varied in such a way that the effective radiation pattern of the array is reinforced in a desired direction and suppressed in undesired directions.An antenna array...
' setup. All this was engineered into a 38 cm wide plastic body, presented in white and adorned with the BSB logo at the bottom. The low-noise block converter
Low-noise block converter
A low-noise block downconverter is the receiving device of a parabolic satellite dish antenna of the type commonly used for satellite TV reception...
(LNB) was based in the center, behind the layers, and contained a simple reception unit in line with other satellite antennae of the time. It was manufactured by Matsushita and rated as a 10 GHz standard unit.
The Squarial's small size was possible thanks to the high power of the two Marcopolo DBS satellites, which simulcast the same channels on the same frequencies. The broadcast power was 59dBW, with a 0.05 degree accuracy.
Manufacturers of the DMAC receivers used with the Squarial included, Ferguson, Phillips, Nokia and Tatung.
Modification
The Squarial was a highly specified unit, designed specifically for operation on the Marco Polo satellites' frequency range. As such the LNB can only tune a limited range of frequencies, and when utilised in modern circumstances the frequency is subsequently out of phase by around 100 MHz.Some owners modified the squarial to operate with the Thor satellite system (formerly BSB's own satellites, Marcopolo) after the decline of BSB. This was due in large part to the highly discounted price of the unit during the final months of BSB's existence. D2MAC programmes could be picked up from the Scandinavian satellites during the early 1990s and viewed using modified receivers. ( Latterly, once transmissions ceased from these satellites, Squarials could be used to receive broadcasts from the French terrestrial relay satellites at 5.0w.
BSB's alternative dishes have also been used successfully to tune into modern broadcast transmissions, whilst testing has been limited, analogue transmissions from the Astra & Hotbird satellites are reported to have been tuned.
Design and brand
BSB placed the Squarial at the heart of its advertising campaign, using the diamond shape throughout all of its channel logos and on screen presentation. This square/diamond image extended down to BSB's corporate logo and even printed and televisual advertising mediums. This led to the company's slogan (used throughout the company's existence) "It's smart to be square".The unique appearance was a design first for satellite antennae, its flat plate measured only a few millimetres thick and the LNB unit protruded another 3 cm from the rear. It was built to a very high standard, featuring good quality plastics, weather resistant coatings and stainless steel mounting arm. Compared with the amstrad setups offered by SKY — made from cheap metal — the Squarial offered a much more attractive setup.
Alternatives
BSB offered two alternatives to the squarial, the cheaper more conventional looking mini-dish format and the rounded-rectangle format dish.The first revision was in the shape of a vertical ellipse of roughly 30 cm in diameter. The design employed a short LNB arm with a 'spike' design LNB operating at a frequency of 10 GHz. Essentially this design could be considered the forerunner to BSkyB's minidish. The second revision took on the appearance of a perfectly circular dish (around 25 cm in diameter), using a standard LNB at 10 GHz. In essence both function like a normal satellite dish, only scaled down.