SmartRider
Encyclopedia
SmartRider is Transperth
's contactless electronic ticket
ing system using smartcard technology for the process of charging patrons for public transport
in Western Australia
.
The SmartRider is a credit card-sized smartcard incorporating a microchip and internal aerial, allowing the smartcard to communicate with processors located on Transperth buses and ferries and at train stations, as well as on some regional town services in Western Australia. The microchip enables value to be loaded onto the card, as well as allowing the journey details to be recorded and the appropriate fare deducted from the stored value on the card.
The SmartRider system is designed so that passengers can 'tag on' and 'tag off' whenever they travel through the Transperth network.
The SmartRider was rolled out progressively to different groups of customers:
For much of the Control Group testing, Transperth offered full or partial fare refunds to prevent software problems causing overcharging.
Until the SmartRider system was implemented, all Perth train stations were effectively "open", meaning that a passenger - or indeed, any member of the public - could freely walk into or out of any given train station, or onto a train, without being forced to buy a ticket.
SmartRider implementation has resulted in some stations being gated ("closed") so that one must either validate a SmartRider ticket through a gate to enter or exit the station, or alternatively, show a valid ticket and concession card (if applicable) to a station attendant next to the gate. The officer is also able to assist people with special needs. At all other stations, fare gates have not been installed and a SmartRider processor has been installed at station entry and exit points.
Bus stations, apart from those that are interchanges with train stations, do not employ the technology as buses each have their own attendant.
Because of this, passengers tagging off a bus at any Controlled Station will automatically be tagged onto the train, and passengers tagging on this bus after getting off the train at a Controlled Station will automatically be tagged off the train before being tagged onto the bus.
The following stations are controlled stations:
Several options exist for adding value to a SmartRider card. The AutoLoad system, which allows Transperth to directly debit from a passenger's bank account, attracts a 25% discount from the normal cash fare per journey (comparable to the discount applied to 40-trip MultiRiders under the previous system), while all other methods of adding value attract a 15% discount (comparable to 10-trip MultiRiders). When a SmartRider card is first purchased, a minimum credit of $10.00 in addition to the card cost must be added. The card has a maximum limit of $256.00.
In order to successfully tag on, a card must contain a minimum equivalent to a two-section fare for the holder's user category (60c for concession, $1.50 for adult) - the only exception is a Seniors SmartRider holder travelling during a nominated free travel period. If the card cannot be tagged on, a cash fare must be purchased.
or credit card. They are located at the following train and bus stations:
Machines at Transperth InfoCentres, located in Perth's CBD, also offer this feature.
authority to automatically reload the card with a pre-set amount from a passenger's bank account once the low-value threshold of $6 for standard users and $3 for concession users is reached. Alternatively, passengers can manually transfer funds from their bank account using BPay
, either via phone or internet. It takes 3-5 working days depending on your financial institution and the time of the BPAY
transaction. Passengers must have a minimum of a 2 section fare when they tag on for the funds to transfer onto the card.
Loading a SmartRider automatically via direct debit is the only way users can achieve similar levels of fare savings in comparison to the previous Multirider
system.
-based card and have a unique individual identification number allocated to each card. These cards communicate specific information as they interact with the relevant processing equipment at the points of boarding and disembarking from the various transport modes that the card operates across (bus, train, ferry).
The Wayfarer SmartTGX150 Electronic Ticketing Machine (ETM) incorporates a smartcard processor that allows the driver to sign on and off, issue cash tickets and process SmartRider transactions. Passengers can use the unit to top up their SmartRider cards and the ETM/GPS interface also determines the exact location of a bus at all times and calculates fare zones automatically. The project also includes the Wayfarer SCP smartcard Platform processor for tagging on and off at all ‘open’ train station platforms, and the SCV, the Wayfarer smartcard bus and ferry validator for tagging on and off buses and ferries.
Information collected by processing equipment is then transmitted back to Transperth
by either wired LAN
(for fixed processors including standalone units and faregates) or wireless LAN (For buses and other mobile forms of transport). The Wayfarer TGX150 ticket machines also include a removable data cartridge that is used as a backup information store that can be used in the event of a systems or communications failure with the central system.
Major train stations are fitted with Wayfarer operated access control gates, which open in response to the card.
Usage data is stored both on the card and centrally by Transperth and provides users of the system the capability to check and review recent usage by either visiting a designated Information Kiosk or online via the Transperth website.
The police have the potential to use SmartRider card data as an investigative tool, and use of this feature overseas is dramatically increasing. In London
, where the RFID-technology Oyster Card
is in use, there were 243 police requests made in total as of March 2006.
MP Katie Hodson-Thomas, who claimed that passengers would end up paying $324 more a year for public transport under SmartRider. In February 2006, The West Australian
reported criticism by trial users who claimed that their failure to tag off, either by accidentally forgetting to do so or due to a non-working machine, resulted in a four-zone fare being charged to the SmartRider regardless of distance travelled.
However, Transperth has maintained that the default fare is "equal to the cash fare on the assumed basis that a passenger who has failed to tag off has travelled to the final destination of that particular bus, train or ferry service", and that the four-zone rate only applies to rail travel. During the implementation trial phase, the default fare was charged at the Cash Fare less the customer's discount based on how they last reloaded their card. With the opening of the Mandurah railway line, the default fare for travel on all train services was increased to a seven-zone fare, due to the ability of passengers to transfer trains without tagging off/on.
Further criticism has arisen from the set-up costs of the SmartRider card. The total cost of set up is $20 and the cost of the card itself is $10. Although Transperth claim this is to cover the cost of a passenger travelling four zones on a lesser-zone fare, this is contradicted by the inability to travel without a minimum fare on the card.
Transperth
Transperth is the brand name of the public transport system in Perth, Western Australia. It is operated by the Public Transport Authority.-History:...
's contactless electronic ticket
Electronic ticket
An electronic ticket is a digital ticket. It may be issued by an airline, in road, urban or rail public transport, and in entertainment.-Airline ticket:...
ing system using smartcard technology for the process of charging patrons for public transport
Public transport
Public transport is a shared passenger transportation service which is available for use by the general public, as distinct from modes such as taxicab, car pooling or hired buses which are not shared by strangers without private arrangement.Public transport modes include buses, trolleybuses, trams...
in Western Australia
Western Australia
Western Australia is a state of Australia, occupying the entire western third of the Australian continent. It is bounded by the Indian Ocean to the north and west, the Great Australian Bight and Indian Ocean to the south, the Northern Territory to the north-east and South Australia to the south-east...
.
The SmartRider is a credit card-sized smartcard incorporating a microchip and internal aerial, allowing the smartcard to communicate with processors located on Transperth buses and ferries and at train stations, as well as on some regional town services in Western Australia. The microchip enables value to be loaded onto the card, as well as allowing the journey details to be recorded and the appropriate fare deducted from the stored value on the card.
The SmartRider system is designed so that passengers can 'tag on' and 'tag off' whenever they travel through the Transperth network.
Implementation of the system
The implementation of SmartRider was originally planned for January 2005, but due to problems with implementation of reader technology, the key dates changed a number of times. SmartRiders became available to members of the public from 14 January 2007.The SmartRider was rolled out progressively to different groups of customers:
- Trial Users: A small group of passengers travelling through Stirling Train StationStirling railway station, PerthStirling railway station is a Transperth train and bus interchange located northwest of Perth railway station in Western Australia, on the Joondalup Line.-History:...
participated in the initial trial in May 2004. - Control Group: 2,000 passengers from key user groups were invited to test the system. Initially the Control Group trial was to last for 4 weeks, however participants were subsequently asked to continue using their cards until the full rollout (from 16 October 2005).
- Expanded Control Group: 5,000 more passengers joined the Control Group to test this system under load (from 23 January 2006).
- Seniors: New Western Australian Seniors' Cards were issued with integrated SmartRiders in May 2006.
- Secondary Students: Students were issued with ID cards with integrated SmartRiders in 2005. Secondary school students began using the system on 16 July 2006.
- Tertiary Students: Tertiary SmartRider became available for UWAUniversity of Western AustraliaThe University of Western Australia was established by an Act of the Western Australian Parliament in February 1911, and began teaching students for the first time in 1913. It is the oldest university in the state of Western Australia and the only university in the state to be a member of the...
students from 16 July 2006, and all full-time tertiary students from 4 November 2006. - Primary Students: Students were issued with ID cards with integrated SmartRiders in 2005. Primary school students began using the system on 1 October 2006. The 50 cents Student MultiRiders were phased out afterwards.
- TravelEasy subscribers: The members of the TravelEasy online service were able to obtain the SmartRider card from 13 December 2006, before it was made available to the public.
- General Public: Smartriders were made available to the entire population when the MultiRiderMultiRiderThe MultiRider was a pre-purchased magnetic-stripe ticketing system used on rail, bus, and ferry services operated under the Transperth brand, either by or under contract for the Public Transport Authority of Western Australia...
system was phased out and subsequently withdrawn from use on 8 April 2007. - Car Parking: From 22 October to 4 November 2007, new Pay'n'Display machines were trialled at the Stirling Interchange car park so that SmartRider users can pay for their parking with their SmartRider This facility has since been extended to 13 other stations on the network.
- TransGeraldton: SmartRider was introduced on TransGeraldton bus services in March 2009.
- TransBusselton: SmartRider was introduced on TransBusselton bus services on 21 December 2009.
For much of the Control Group testing, Transperth offered full or partial fare refunds to prevent software problems causing overcharging.
Open, closed and controlled train stations
SmartRider implementation has resulted in some stations being gated ("closed") so that one must either validate a SmartRider ticket through a gate to enter or exit the station, or alternatively, show a valid ticket and concession card (if applicable) to a station attendant next to the gate. The officer is also able to assist people with special needs. At all other stations, fare gates have not been installed and a SmartRider processor has been installed at station entry and exit points.
Bus stations, apart from those that are interchanges with train stations, do not employ the technology as buses each have their own attendant.
Open stations
All Armadale/Thornlie Line, Fremantle Line and Midland Line other than termini and Bassendean are open. The others are:- Joondalup Line: Leederville, Glendalough, Greenwood, Edgewater and Currambine
- Mandurah Line: Canning Bridge, Kwinana, Wellard
Closed stations
- City Stations: Perth CityPerth railway stationPerth Station including Perth Underground is the largest railway station in Perth, Western Australia, and functions as an interchange between the Transperth Trains Armadale / Thornlie, Fremantle, Joondalup, Mandurah and Midland railway lines, as well as the Transwa Australind.-History:The Victorian...
, Esplanade - Joondalup Line: StirlingStirling railway station, PerthStirling railway station is a Transperth train and bus interchange located northwest of Perth railway station in Western Australia, on the Joondalup Line.-History:...
, WarwickWarwick railway station, PerthWarwick railway station is a Transperth train and bus interchange located north-northwest of Perth railway station in Western Australia, on the Joondalup Line.-History:...
, Whitfords, Joondalup and ClarksonClarkson railway station, PerthClarkson is a Transperth bus and train station located north of Perth, Western Australia, in the suburb of Clarkson. It presently serves as the terminus for the Joondalup Line. It is located east of Ocean Keys Shopping Centre.... - Fremantle Line: Fremantle
- Midland Line: Bassendean and MidlandMidland railway station, PerthMidland Train Station is a Transperth train station 16km from Perth Train Station, in Western Australia, and is the terminus of the current suburban rail service on the Midland Line.-History:...
- Armadale/Thornlie Line: Thornlie and ArmadaleArmadale railway station, PerthArmadale Train Station is a Transperth train station 30 km from Perth Train Station, in Western Australia, on the Armadale Line. The current station building is less than five years old, having been constructed in a more favourable location than the previous station of the same...
- Mandurah Line: Bull Creek, Murdoch, Cockburn Central, RockinghamRockingham railway station, PerthRockingham Station is a bus and railway interchange located in the Rockingham suburb of Cooloongup, Western Australia. Situated near the intersection of Rae Road and Ennis Avenue in Cooloongup, east of Rockingham Shopping Centre, it is served by the interurban Mandurah line, with services to both...
, Warnbro and Mandurah
Controlled stations
At some bus-train interchanges, arriving buses drop passengers off inside the "paid" area of a closed station. These stations have a special arrangement which allows passengers to transfer from a bus to a train and vice versa without going through a fare gate.Because of this, passengers tagging off a bus at any Controlled Station will automatically be tagged onto the train, and passengers tagging on this bus after getting off the train at a Controlled Station will automatically be tagged off the train before being tagged onto the bus.
The following stations are controlled stations:
- Joondalup Line: WarwickWarwick railway station, PerthWarwick railway station is a Transperth train and bus interchange located north-northwest of Perth railway station in Western Australia, on the Joondalup Line.-History:...
and Whitfords
Types of SmartRider cards
A range of SmartRider cards exist. When a SmartRider card is first purchased, a card purchase fee of $5.00 for concession users and $10.00 for standard users will apply, on top of which credit needs to be added to use the card.- Standard SmartRider is for use by passengers without concessions. Standard Transperth adult fares apply.
- Concession SmartRider is for use by passengers entitled to a concession, such as disability pension recipients, the unemployed and holders of health care cards. Standard Transperth concession fares apply. Please Note: Some types require you to reapply each year at a SmartRider agent by filling out a form and showing your Concession Card (This change will be applied immediately)
- Seniors SmartRider is for use by passengers over the age of 60, and is part of the Western Australian Seniors CardWestern Australian Seniors CardThe Western Australian Seniors Card is an identity/concession/discount card issued by the Department for Communities of the Government of Western Australia.-Eligibility:...
, which provides reduced-cost access to a range of government services. From 4 April 2009, Seniors SmartRider holders are permitted to free travel during off-peak hours on weekdays and all weekends and public holidays. The concession fare applies during peak hours. The Seniors SmartRider was fully implemented from August 2006.
- Student SmartRider is for use by primary and secondary school students, and acts as a student identification card as it includes student details such as name, date of birth and student number. Cardholders are entitled to a special student fare during school periods, and standard Transperth concession fares during other periods.
- Tertiary SmartRider is for use by full-time TAFE and university students, who must, before purchasing, apply for a concession through their institution. The Tertiary SmartRider was fully implemented for university students on 4 November 2006.
- Pensioners SmartRIder is a new SmartRider card that was introduced alongside the weekdays free travel enitilements.
Adding value to a SmartRider card
In order to successfully tag on, a card must contain a minimum equivalent to a two-section fare for the holder's user category (60c for concession, $1.50 for adult) - the only exception is a Seniors SmartRider holder travelling during a nominated free travel period. If the card cannot be tagged on, a cash fare must be purchased.
| Adding value to your SmartRider card |
||
| Add-value method | Minimum add value amount | Maximum add value amount |
| AutoLoad and BPAY | $20 | $250 |
| On board | $10 ($5 for concession) | $50 |
| Add-Value Machines (AVMs) | $10 | $100 |
| All other methods | $10 ($5 for concession) | $250 |
Add-Value Machines (AVMs)
AVMs allow passengers to add value to their SmartRider card by inserting notes or coins into a machine, or by using an EFTPOSEFTPOS
EFTPOS is the general term used for debit card based systems used for processing transactions through terminals at points of sale. In Australia and New Zealand it is also the brand name of the specific system used for such payments...
or credit card. They are located at the following train and bus stations:
- CityPerth, Western AustraliaPerth is the capital and largest city of the Australian state of Western Australia and the fourth most populous city in Australia. The Perth metropolitan area has an estimated population of almost 1,700,000....
: Perth Train Station, Esplanade Busport, Wellington Street bus station - Armadale Line: Thornlie and ArmadaleArmadale railway station, PerthArmadale Train Station is a Transperth train station 30 km from Perth Train Station, in Western Australia, on the Armadale Line. The current station building is less than five years old, having been constructed in a more favourable location than the previous station of the same...
- Fremantle Line: Fremantle and Subiaco
- Midland Line: MidlandMidland railway station, PerthMidland Train Station is a Transperth train station 16km from Perth Train Station, in Western Australia, and is the terminus of the current suburban rail service on the Midland Line.-History:...
and Bassendean - Joondalup Line: ClarksonClarkson railway station, PerthClarkson is a Transperth bus and train station located north of Perth, Western Australia, in the suburb of Clarkson. It presently serves as the terminus for the Joondalup Line. It is located east of Ocean Keys Shopping Centre....
, Joondalup, Whitfords, WarwickWarwick railway station, PerthWarwick railway station is a Transperth train and bus interchange located north-northwest of Perth railway station in Western Australia, on the Joondalup Line.-History:...
and StirlingStirling railway station, PerthStirling railway station is a Transperth train and bus interchange located northwest of Perth railway station in Western Australia, on the Joondalup Line.-History:... - Mandurah Line: Cockburn Central, Murdoch, RockinghamRockingham railway station, PerthRockingham Station is a bus and railway interchange located in the Rockingham suburb of Cooloongup, Western Australia. Situated near the intersection of Rae Road and Ennis Avenue in Cooloongup, east of Rockingham Shopping Centre, it is served by the interurban Mandurah line, with services to both...
and Esplanade.
Machines at Transperth InfoCentres, located in Perth's CBD, also offer this feature.
From a bank account
AutoLoad allows a user to establish a direct debitDirect debit
A direct debit or direct withdrawal is an instruction that a bank account holder gives to his or her bank to collect an amount directly from another account. It is similar to a direct deposit but initiated by the beneficiary...
authority to automatically reload the card with a pre-set amount from a passenger's bank account once the low-value threshold of $6 for standard users and $3 for concession users is reached. Alternatively, passengers can manually transfer funds from their bank account using BPay
BPAY
BPAY is a payment system in Australia which enables payments to be made through a financial institution's online or telephone banking facility to merchants who are registered BPAY billers....
, either via phone or internet. It takes 3-5 working days depending on your financial institution and the time of the BPAY
BPAY
BPAY is a payment system in Australia which enables payments to be made through a financial institution's online or telephone banking facility to merchants who are registered BPAY billers....
transaction. Passengers must have a minimum of a 2 section fare when they tag on for the funds to transfer onto the card.
Loading a SmartRider automatically via direct debit is the only way users can achieve similar levels of fare savings in comparison to the previous Multirider
MultiRider
The MultiRider was a pre-purchased magnetic-stripe ticketing system used on rail, bus, and ferry services operated under the Transperth brand, either by or under contract for the Public Transport Authority of Western Australia...
system.
On board buses and ferries
A SmartRider tag-on machine is integrated into machines which issue bus and ferry tickets. Passengers can add value to the card by paying the driver.Retail outlets
Value can be added via EFTPOS or cash at authorised retail outlets such as newsagents.Technical details
The SmartRider project includes various machines and technologies to manage and control the system including distance travelled, fare deduction, and processing.Physical technology
At the core of the system is the individual cards issued to passengers using the system. The cards are a MIFAREMIFARE
MIFARE is the NXP Semiconductors-owned trademark of a series of chips widely used in contactless smart cards and proximity cards. According to the producers, billions of smart card chips and many millions of reader modules have been sold...
-based card and have a unique individual identification number allocated to each card. These cards communicate specific information as they interact with the relevant processing equipment at the points of boarding and disembarking from the various transport modes that the card operates across (bus, train, ferry).
The Wayfarer SmartTGX150 Electronic Ticketing Machine (ETM) incorporates a smartcard processor that allows the driver to sign on and off, issue cash tickets and process SmartRider transactions. Passengers can use the unit to top up their SmartRider cards and the ETM/GPS interface also determines the exact location of a bus at all times and calculates fare zones automatically. The project also includes the Wayfarer SCP smartcard Platform processor for tagging on and off at all ‘open’ train station platforms, and the SCV, the Wayfarer smartcard bus and ferry validator for tagging on and off buses and ferries.
Information collected by processing equipment is then transmitted back to Transperth
Transperth
Transperth is the brand name of the public transport system in Perth, Western Australia. It is operated by the Public Transport Authority.-History:...
by either wired LAN
Län
Län and lääni refer to the administrative divisions used in Sweden and previously in Finland. The provinces of Finland were abolished on January 1, 2010....
(for fixed processors including standalone units and faregates) or wireless LAN (For buses and other mobile forms of transport). The Wayfarer TGX150 ticket machines also include a removable data cartridge that is used as a backup information store that can be used in the event of a systems or communications failure with the central system.
Major train stations are fitted with Wayfarer operated access control gates, which open in response to the card.
Systems platform
The Wayfarer Merit and SmarTrack back office systems provide statistical data and interface to the financial control systems of the Commonwealth Bank of Australia. Other functions will allow card top up via the Internet and by direct debit systems.Security
In February 2008, the Dutch government issued a warning about the security of access keys based on the ubiquitous MiFare Classic RFID chip (the same chip used in the SmartRider system) after some students from The University of Virginia demonstrated a theoretical attack which could retrieve the private key from the card within minutes on a standard desktop pc. It has been estimated that the security of the cards will hold up until early 2010 before it becomes a trivial matter to exploit the inherent security vulnerabilities of the RFID based card system.Privacy
Users of the system pass their card over a processor both on boarding and departure of any mode of transport using the system. Each SmartRider card is uniquely numbered, and registration is necessary before the card can be used for concession card holders, and is necessary to access many of the advertised features for other users though is not compulsory. The registration process requires filling in a form providing Transperth with the passenger's full name, address, date of birth, SmartRider card number and password.Usage data is stored both on the card and centrally by Transperth and provides users of the system the capability to check and review recent usage by either visiting a designated Information Kiosk or online via the Transperth website.
The police have the potential to use SmartRider card data as an investigative tool, and use of this feature overseas is dramatically increasing. In London
London
London is the capital city of :England and the :United Kingdom, the largest metropolitan area in the United Kingdom, and the largest urban zone in the European Union by most measures. Located on the River Thames, London has been a major settlement for two millennia, its history going back to its...
, where the RFID-technology Oyster Card
Oyster card
The Oyster card is a form of electronic ticketing used on public transport services within the Greater London area of the United Kingdom. It is promoted by Transport for London and is valid on a number of different travel systems across London including London Underground, buses, the Docklands...
is in use, there were 243 police requests made in total as of March 2006.
Design
The system has been criticised for usability issues in general system, website and top-up machine design. The most significant usability issue is that customers who for whatever reason do not "tag off" at the end of their journeys will be charged a default fare - being charged "equal to the cash fare on the assumed basis that a passenger who has failed to tag off has travelled to the final destination of that particular bus, train or ferry service". Users who have run up a debt of as little as $4 are prohibited from using the card until the debt is repaid.Costs
Criticism has been directed at the cost to users of the SmartRider system compared to its predecessor, the MultiRider. While the MultiRider could be bought as a 40-ride ticket for a 25% discount, this discount can now only be obtained by paying by direct debit, which can take up to 3 weeks to activate. A 15% discount is available for all other methods of payment. This was raised in Parliament by LiberalLiberal Party of Australia
The Liberal Party of Australia is an Australian political party.Founded a year after the 1943 federal election to replace the United Australia Party, the centre-right Liberal Party typically competes with the centre-left Australian Labor Party for political office...
MP Katie Hodson-Thomas, who claimed that passengers would end up paying $324 more a year for public transport under SmartRider. In February 2006, The West Australian
The West Australian
The West Australian is the only locally-edited daily newspaper published in Perth, Western Australia, and is owned by ASX-listed Seven West Media . The West is published in tabloid format, as is the state's other major newspaper, The Sunday Times, a News Limited publication...
reported criticism by trial users who claimed that their failure to tag off, either by accidentally forgetting to do so or due to a non-working machine, resulted in a four-zone fare being charged to the SmartRider regardless of distance travelled.
However, Transperth has maintained that the default fare is "equal to the cash fare on the assumed basis that a passenger who has failed to tag off has travelled to the final destination of that particular bus, train or ferry service", and that the four-zone rate only applies to rail travel. During the implementation trial phase, the default fare was charged at the Cash Fare less the customer's discount based on how they last reloaded their card. With the opening of the Mandurah railway line, the default fare for travel on all train services was increased to a seven-zone fare, due to the ability of passengers to transfer trains without tagging off/on.
Further criticism has arisen from the set-up costs of the SmartRider card. The total cost of set up is $20 and the cost of the card itself is $10. Although Transperth claim this is to cover the cost of a passenger travelling four zones on a lesser-zone fare, this is contradicted by the inability to travel without a minimum fare on the card.