Slotcar racing
Encyclopedia
Note: this article concerns slot car racing competition. For information on the general slot car hobby, including more detailed coverage of history, scales, track-types and mechanical functioning, see slot car
.
Slot car racing (also called slotcar racing or slot racing) is the competitive hobby
of racing
with powered miniature autos (or other vehicles) which are guided by grooves or slots in the track on which they run.
Slot car
s are usually models of actual automobiles, though some have bodies purpose-designed for miniature racing. Most enthusiasts use commercially-available slot cars (often modified for better performance), others motorize static models, and some "scratch-build," creating their own mechanisms and bodies from basic parts and materials.
Slot car racing ranges from casual get-togethers at home tracks, using whatever cars the host makes available, to very serious competitions in which contestants painstakingly build or modify their own cars for maximum performance and compete in a series of races culminating in a national championship. Some hobbyists, much as in model railroading, build elaborate tracks, sculpted to have the appearance of a real-life racecourse, including miniature buildings, trees and people, while the more serious competitive racers often prefer a track unobstructed by scenery.
Slot car racing was a popular fad in the 1960s, with sales reaching $500 million annually, including 3,000 public courses in the United States alone. The fad sputtered out by the start of the 1970s as amateurs felt squeezed out at races and stayed home.
There are three common slotcar scales
used for competition:
In addition to the major scales, 1:43 in 2006 slot car sets are generally marketed as children's toys. So far, there is little organized competition in 1:43, but the scale is gaining some acceptance among adult hobbyists for its affordability and moderate space requirements. An average car would be 4.3" (10.9 cm).
Shop and club tracks used for competition (especially in 1:32 and 1:24 scales) are usually hand built "Routed Tracks" in which the guide slots for the entire racecourse are routed into one or a few large pieces of sheet material (such as chipboard
or Medium-density fibreboard
) providing a smooth and consistent surface.
Competition tracks are usually laid out as road courses with many turns, though ovals and "tank tread" (trapezoidal) ovals are also fairly common. On a road course or oval, each car and each lane is generally marked with "lane tape" of a distinguishing color, allowing the corner marshals (officials) to return cars that have spun off the track to the proper lane.
Generally, tracks for formal competition may have banked corners and may bridge one section over another, but may not otherwise use "trick" configurations. Home tracks often include special features to increase the drama and/or challenge of racing, such as slots that wiggle or squeeze the lanes together, bumps, airborne jumps, or uneven surfaces, but these are typically called "toy" tracks and are not used for competition.
A different segment of the hobby is slot car drag racing
on a long straight strip of track. In HO size, these dragstrips are often a scale quarter-mile.
1:24 Scale tracks used for competition are generally 6-8 lane routed tracks with either wooden or flexible plastic retaining walls. The tracks are usually located in commercial or purpose-built racing centres. Most of the tracks used in the USRA regional and national events are either original American Raceways (AMF) commercial tracks or variations of these designs made from original blueprints. Tracks used in other countries, including those used for the ISRA World Championships are often more recent designs. Generally tracks used for regional or national competition have an epoxy or polymer painted surface with recessed braided electrical contacts. In USRA Division 1, the use of traction-enhancing compounds on the racing surface ("glue" or "goop") may be applied to the racing surface by the competitors.
One type of 1:24 commercial track is the "Blue King" (155 foot lap length) which is the track that is recognized for world records in 1:24 racing. The 2007 world record qualifying lap is held by Paul Pedersen at 1.404 seconds, which computes to 75.2 mph. The "King" track segments are "named" starting from the main straight in an anti-clock wise direction: bank, chute, deadman (corner), finger, back straight, 90 (corner), donut (corner), lead-on, and top-turn. Generally the "King" tracks are used for wing-car racing, where un-banked "flat" tracks of various designs are used for scale racing. An example of a championship "flat" track is the Gary Gerding designed track installed in July 2007 at Mid-America Raceway and Hobbies near Aurora, IL (the site of the 2009 USRA Division 2 National Championships)and the 2010 ISRA world championships.
Another example of a 1:24 scale track is called the "Engleman Grandstand". It is 220 foot in lap length and eight lanes wide. It is a favorite for fast cars with it's long straights and high deep bank. One can be found still in operation in Rock Hill, South Carolina at The Slot Car Cave.
1:32 Scale competition is generally run on the same routed tracks as 1:24, at least in the USA.
HO Scale competition tracks are typically between 60 and 100 ft in length and 4 to 6 lanes wide. Plastic tracks, often modified for improved performance, are more common in HO competition than in the larger scales, as is the use of large home courses for formal racing.
'Dirty' tracks - these tracks are mainly used for rally and raid.
Many tracks use banks of lead-acid batteries to produce sufficient high amp DC power, but in recent years, relatively inexpensive high-quality electronically-regulated power supplies have become more popular to achieve consistent and clean power.
The second (and most common) way to run a round robin is to have four drivers (or as many as there are lanes) start at a time, and rotate through all the lanes, before being replaced by the next set of drivers. This is known as a "heat" or "consi". Often a small amount of practice time (usually 30 seconds) will be given to the drivers prior to the start of each heat. If there are an odd number of drivers such that they are not wholly divisible into the number of lanes, one of two measures is taken: either a heat is run with one or more positions unfilled, or a heat is run with extra drivers, with a "sit-out" position. After all drivers have run their heat, placement is determined by total laps completed.
Often round robins are modified to include a "main" and sometimes also a "last-chance" heat. When run with a main, the round robin is run as normal, but at the end the top competitors (as many as there are lanes) run an extra heat. This heat is usually longer (3 to 5 minutes per segment, 1.5 "pit" time, and 1 minute practice before the heat). At the end the drivers are re-placed based on the new lap totals.
Last-chance heats are similar to mains. The top competitors (number of lanes minus one) from the round robin move into the main, and the runners-up (as many as there are lanes) are moved into the last chance heat. The last chance heat is run before the main, and is usually run with the same time parameters as the other heats. At the end, the top competitors from the last-chance are re-placed based on their new lap totals (though never lower than a comptetitor that didn't make the last-chance), and the winner of the heat moves into the final position in the main.
Bracketed formats are usually reserved for national events, and include qualifying, elimination consis, semifinals, and a main.
When the segment time has elapsed, a small amount of time, usually one minute, is given for the driver to switch lanes, perform any necessary maintenance to his car, and return his car to its resting position (albeit in a different lane). At the same time, the next driver in the succession moves into the first lane, placing his car at the starting position. When a driver completes all the lanes, his total laps and final position are recorded. This continues until all drivers have completed all lanes. Lap totals are compared to determine placement.
Most racing organisations allow a "track call" (where the power is turned off) for a situation where a race car is in the wrong lane. This is also referred to as a "rider" and is considered to be a dangerous and unfair situation. Track calls are also sometimes used in the event that a car flies off the table and cannot be located by a marshal.
There are many different local, regional, national, and international organizations for 1:24 scale slot cars. 1:24 scale is primarily raced at commercial slot car raceways. The largest USA organisation, holding 2 Divisional USA National Championship events every year, is the USRA: United Slot Racers Association. The International Slot Racing Association (ISRA) sanctions a World Slot Car Racing Championship in a different country every year.
National Slot Car Scale Racing Association known as NSCSRA. NSCSRA formed in 1989 for the purpose of promoting "Fair and Equal Racing for all" who enjoyed slot cars as a hobby. The rules were established in 1989 to insure the fair and equal racing concept for all participants. Up to four times a year NSCSRA holds a Championship for various classes including Vintage Scale Racing, Flexi and Unlimited Racing. The Famous "Top Gunner" Championship recently crowned a two Champion Jim "Mr. B" Bronson. Bronson joins Top Gunner Champions Bryan "Captain Snoozy" Proctor (3 times, 1 time NON PRO, 2 PRO), Casey Kennedy (6 times PRO), Kaitlyn White (2 Times NON PRO) as mulitple times Champion. The most recent Championship held in early 2009 crowned Bronson as Pro and Don Sims as Non Pro Champions at Tuff Traxx Hobbies and Slot Car Raceway In Mesa, Arizona.
1:32 scale racing organizations
The International Slot Racing Association (ISRA) sanctions a World Slot Car Racing Championship in a different country every year.
In 2004, the True Scale Racing Federation (TSRF) was established by former pro 1:24 racer Phillipe de Lespinay (aka: PdL) with the goal being to establish a North American "true scale" 1:24 and 1:32 North American racing series. The TSRF concept is very similar to full-scale "spec" racing where only TSRF approved equipment can be used for competition. Many other countries have national organisations, for example the The British Slot Car Racing Association (BSCRA) have been running national championships since 1964.
HO Organizations
There are two large HO racing organizations in the US: HOPRA (the HO Professional Racing Association) and UFHORA (the United Federation of HO Racers Association). Each hosts a national competition annually, usually in July. There are many state-wide organizations running under HOPRA and/or UFHORA rule sets.
"The Fray In Ferndale", California
boasts the largest turnout of any slot car race in the world. The highly competitive race is held yearly, in February, and more than 100 individuals, and 16 teams, show up to race on 8 tables. This is the race that determines the direction that the hobby takes, regarding the venerable Aurora Thunderjet. The race has been held since 1997.
Unlike 1:24 scale tracks, HO race tracks can be small enough to fit in common basements. Therefore, most state organizations run some, if not most, of their series on home tracks as opposed to hobby shop tracks. Additionally, home tracks are often used for national competition.
HO Scale Oval racing is very popular in the Northeastern USA. The cars are molded to look like Dirt Modifieds and Sprint Cars. The Sprint Cars and Dirt Modified cars are raced on oval tracks anywhere from 8 lanes to 4 lanes.
There is also a class in its genesis called "One Motor Only" that is similar to Group 7 with the difference being that motor changes after tech are not allowed.
Note: in spite of the USRA not yet recognizing "Division 3", independent sanctioning bodies on the east and west coast have been organizing and hosting Nostalgia Can-Am and Nostalgia F1 races. Interest has been growing in a "spec" Can Am class which is expected to begin having major events in 2009.
Other international organisations such as the IMCA and ISRA have their own classifications and technical regulations. Contact the organisation directly for their latest rules and series schedule.
To note that in rally and raid races it is frequent to include 'dirty' races, e.g. snow or dirt.
ISRA
The 2011 championships at redfox raceway was held on the 1st-8th October, in an historic moment that is sure to not be repeated for a long time Paulo Trigillo of Italy won all 4 classes allbeit one was with Swedens Michael Landrud. The 2012 competition will be held in Sweden.
USRA
The 2010 Division 1 (Wing) Nationals (or "Nats") were held at The Track in Dallas, Texas at Dallas slot cars July 30- August 8.
2010 Wing Car USA Nats Champions:
Semi-Pro Group 7: Petr Krcil
Pro Group 7: Richard Cunutte
Theseare the only winners I could find off the site, sorry
The 2006 Division 2 (Scale) Nationals were held at Slot Car Raceway in Rohnert Park, CA starting on April 18 and concluding on April 23.
2006 Scale Nats Champions:
1:32 Eurosport - Paul Gawronski
AM GT-12 - Zac Grinstead
Expert GT-12 - Herman James
C-12 Eurosport - Paul Gawronski
Am GTP - Chris Rodriguez, Jr.
Expert GTP - Duran Trujillo
Am GT1 - Ron Southern
Expert GT1 - Paul Gawronski
Jr Group 10 NASCAR - Zac Grinstead
Am Group 10 NASCAR - Zac Grinstead
Expert 4.5 NASCAR - Duran Trujillo
Expert Group 10 NASCAR - Duran Trujillo
Am 4.5 NASCAR - Bill Vanderziel
The President of the USRA, Chris Radisich, is considering sanctioning a "Division 3" which will be for vintage-type or retro slot racing cars. The rules and Division 3 series are at this moment still evolving, but the purpose is to create a class where the cars raced are easily recognized and to shift away from expensive high tech componentry.
The 25th World Slot Car Championship (aka "The Worlds") was held May 17–21, 2006 in Rio De Janeiro, Brazil at Top Slot Raceways. It was sanctioned by the NPRA which is a South American slot racing federation.
2006 Worlds Champions:
Group 7 (open) - Joao Carlos Geraldo
Note: this article concerns slot car racing competition. For information on the general slot car hobby, including more detailed coverage of history, scales, track-types and mechanical functioning, see slot car
.
Slot car racing (also called slotcar racing or slot racing) is the competitive hobby
of racing
with powered miniature autos (or other vehicles) which are guided by grooves or slots in the track on which they run.
Slot car
s are usually models of actual automobiles, though some have bodies purpose-designed for miniature racing. Most enthusiasts use commercially-available slot cars (often modified for better performance), others motorize static models, and some "scratch-build," creating their own mechanisms and bodies from basic parts and materials.
Slot car racing ranges from casual get-togethers at home tracks, using whatever cars the host makes available, to very serious competitions in which contestants painstakingly build or modify their own cars for maximum performance and compete in a series of races culminating in a national championship. Some hobbyists, much as in model railroading, build elaborate tracks, sculpted to have the appearance of a real-life racecourse, including miniature buildings, trees and people, while the more serious competitive racers often prefer a track unobstructed by scenery.
Slot car racing was a popular fad in the 1960s, with sales reaching $500 million annually, including 3,000 public courses in the United States alone. The fad sputtered out by the start of the 1970s as amateurs felt squeezed out at races and stayed home.
There are three common slotcar scales
used for competition:
In addition to the major scales, 1:43 in 2006 slot car sets are generally marketed as children's toys. So far, there is little organized competition in 1:43, but the scale is gaining some acceptance among adult hobbyists for its affordability and moderate space requirements. An average car would be 4.3" (10.9 cm).
Shop and club tracks used for competition (especially in 1:32 and 1:24 scales) are usually hand built "Routed Tracks" in which the guide slots for the entire racecourse are routed into one or a few large pieces of sheet material (such as chipboard
or Medium-density fibreboard
) providing a smooth and consistent surface.
Competition tracks are usually laid out as road courses with many turns, though ovals and "tank tread" (trapezoidal) ovals are also fairly common. On a road course or oval, each car and each lane is generally marked with "lane tape" of a distinguishing color, allowing the corner marshals (officials) to return cars that have spun off the track to the proper lane.
Generally, tracks for formal competition may have banked corners and may bridge one section over another, but may not otherwise use "trick" configurations. Home tracks often include special features to increase the drama and/or challenge of racing, such as slots that wiggle or squeeze the lanes together, bumps, airborne jumps, or uneven surfaces, but these are typically called "toy" tracks and are not used for competition.
A different segment of the hobby is slot car drag racing
on a long straight strip of track. In HO size, these dragstrips are often a scale quarter-mile.
1:24 Scale tracks used for competition are generally 6-8 lane routed tracks with either wooden or flexible plastic retaining walls. The tracks are usually located in commercial or purpose-built racing centres. Most of the tracks used in the USRA regional and national events are either original American Raceways (AMF) commercial tracks or variations of these designs made from original blueprints. Tracks used in other countries, including those used for the ISRA World Championships are often more recent designs. Generally tracks used for regional or national competition have an epoxy or polymer painted surface with recessed braided electrical contacts. In USRA Division 1, the use of traction-enhancing compounds on the racing surface ("glue" or "goop") may be applied to the racing surface by the competitors.
One type of 1:24 commercial track is the "Blue King" (155 foot lap length) which is the track that is recognized for world records in 1:24 racing. The 2007 world record qualifying lap is held by Paul Pedersen at 1.404 seconds, which computes to 75.2 mph. The "King" track segments are "named" starting from the main straight in an anti-clock wise direction: bank, chute, deadman (corner), finger, back straight, 90 (corner), donut (corner), lead-on, and top-turn. Generally the "King" tracks are used for wing-car racing, where un-banked "flat" tracks of various designs are used for scale racing. An example of a championship "flat" track is the Gary Gerding designed track installed in July 2007 at Mid-America Raceway and Hobbies near Aurora, IL (the site of the 2009 USRA Division 2 National Championships)and the 2010 ISRA world championships.
Another example of a 1:24 scale track is called the "Engleman Grandstand". It is 220 foot in lap length and eight lanes wide. It is a favorite for fast cars with it's long straights and high deep bank. One can be found still in operation in Rock Hill, South Carolina at The Slot Car Cave.
1:32 Scale competition is generally run on the same routed tracks as 1:24, at least in the USA.
HO Scale competition tracks are typically between 60 and 100 ft in length and 4 to 6 lanes wide. Plastic tracks, often modified for improved performance, are more common in HO competition than in the larger scales, as is the use of large home courses for formal racing.
'Dirty' tracks - these tracks are mainly used for rally and raid.
Many tracks use banks of lead-acid batteries to produce sufficient high amp DC power, but in recent years, relatively inexpensive high-quality electronically-regulated power supplies have become more popular to achieve consistent and clean power.
The second (and most common) way to run a round robin is to have four drivers (or as many as there are lanes) start at a time, and rotate through all the lanes, before being replaced by the next set of drivers. This is known as a "heat" or "consi". Often a small amount of practice time (usually 30 seconds) will be given to the drivers prior to the start of each heat. If there are an odd number of drivers such that they are not wholly divisible into the number of lanes, one of two measures is taken: either a heat is run with one or more positions unfilled, or a heat is run with extra drivers, with a "sit-out" position. After all drivers have run their heat, placement is determined by total laps completed.
Often round robins are modified to include a "main" and sometimes also a "last-chance" heat. When run with a main, the round robin is run as normal, but at the end the top competitors (as many as there are lanes) run an extra heat. This heat is usually longer (3 to 5 minutes per segment, 1.5 "pit" time, and 1 minute practice before the heat). At the end the drivers are re-placed based on the new lap totals.
Last-chance heats are similar to mains. The top competitors (number of lanes minus one) from the round robin move into the main, and the runners-up (as many as there are lanes) are moved into the last chance heat. The last chance heat is run before the main, and is usually run with the same time parameters as the other heats. At the end, the top competitors from the last-chance are re-placed based on their new lap totals (though never lower than a comptetitor that didn't make the last-chance), and the winner of the heat moves into the final position in the main.
Bracketed formats are usually reserved for national events, and include qualifying, elimination consis, semifinals, and a main.
When the segment time has elapsed, a small amount of time, usually one minute, is given for the driver to switch lanes, perform any necessary maintenance to his car, and return his car to its resting position (albeit in a different lane). At the same time, the next driver in the succession moves into the first lane, placing his car at the starting position. When a driver completes all the lanes, his total laps and final position are recorded. This continues until all drivers have completed all lanes. Lap totals are compared to determine placement.
Most racing organisations allow a "track call" (where the power is turned off) for a situation where a race car is in the wrong lane. This is also referred to as a "rider" and is considered to be a dangerous and unfair situation. Track calls are also sometimes used in the event that a car flies off the table and cannot be located by a marshal.
There are many different local, regional, national, and international organizations for 1:24 scale slot cars. 1:24 scale is primarily raced at commercial slot car raceways. The largest USA organisation, holding 2 Divisional USA National Championship events every year, is the USRA: United Slot Racers Association. The International Slot Racing Association (ISRA) sanctions a World Slot Car Racing Championship in a different country every year.
National Slot Car Scale Racing Association known as NSCSRA. NSCSRA formed in 1989 for the purpose of promoting "Fair and Equal Racing for all" who enjoyed slot cars as a hobby. The rules were established in 1989 to insure the fair and equal racing concept for all participants. Up to four times a year NSCSRA holds a Championship for various classes including Vintage Scale Racing, Flexi and Unlimited Racing. The Famous "Top Gunner" Championship recently crowned a two Champion Jim "Mr. B" Bronson. Bronson joins Top Gunner Champions Bryan "Captain Snoozy" Proctor (3 times, 1 time NON PRO, 2 PRO), Casey Kennedy (6 times PRO), Kaitlyn White (2 Times NON PRO) as mulitple times Champion. The most recent Championship held in early 2009 crowned Bronson as Pro and Don Sims as Non Pro Champions at Tuff Traxx Hobbies and Slot Car Raceway In Mesa, Arizona.
1:32 scale racing organizations
The International Slot Racing Association (ISRA) sanctions a World Slot Car Racing Championship in a different country every year.
In 2004, the True Scale Racing Federation (TSRF) was established by former pro 1:24 racer Phillipe de Lespinay (aka: PdL) with the goal being to establish a North American "true scale" 1:24 and 1:32 North American racing series. The TSRF concept is very similar to full-scale "spec" racing where only TSRF approved equipment can be used for competition. Many other countries have national organisations, for example the The British Slot Car Racing Association (BSCRA) have been running national championships since 1964.
HO Organizations
There are two large HO racing organizations in the US: HOPRA (the HO Professional Racing Association) and UFHORA (the United Federation of HO Racers Association). Each hosts a national competition annually, usually in July. There are many state-wide organizations running under HOPRA and/or UFHORA rule sets.
"The Fray In Ferndale", California
boasts the largest turnout of any slot car race in the world. The highly competitive race is held yearly, in February, and more than 100 individuals, and 16 teams, show up to race on 8 tables. This is the race that determines the direction that the hobby takes, regarding the venerable Aurora Thunderjet. The race has been held since 1997.
Unlike 1:24 scale tracks, HO race tracks can be small enough to fit in common basements. Therefore, most state organizations run some, if not most, of their series on home tracks as opposed to hobby shop tracks. Additionally, home tracks are often used for national competition.
HO Scale Oval racing is very popular in the Northeastern USA. The cars are molded to look like Dirt Modifieds and Sprint Cars. The Sprint Cars and Dirt Modified cars are raced on oval tracks anywhere from 8 lanes to 4 lanes.
There is also a class in its genesis called "One Motor Only" that is similar to Group 7 with the difference being that motor changes after tech are not allowed.
Note: in spite of the USRA not yet recognizing "Division 3", independent sanctioning bodies on the east and west coast have been organizing and hosting Nostalgia Can-Am and Nostalgia F1 races. Interest has been growing in a "spec" Can Am class which is expected to begin having major events in 2009.
Other international organisations such as the IMCA and ISRA have their own classifications and technical regulations. Contact the organisation directly for their latest rules and series schedule.
To note that in rally and raid races it is frequent to include 'dirty' races, e.g. snow or dirt.
ISRA
The 2011 championships at redfox raceway was held on the 1st-8th October, in an historic moment that is sure to not be repeated for a long time Paulo Trigillo of Italy won all 4 classes allbeit one was with Swedens Michael Landrud. The 2012 competition will be held in Sweden.
USRA
The 2010 Division 1 (Wing) Nationals (or "Nats") were held at The Track in Dallas, Texas at Dallas slot cars July 30- August 8.
2010 Wing Car USA Nats Champions:
Semi-Pro Group 7: Petr Krcil
Pro Group 7: Richard Cunutte
Theseare the only winners I could find off the site, sorry
The 2006 Division 2 (Scale) Nationals were held at Slot Car Raceway in Rohnert Park, CA starting on April 18 and concluding on April 23.
2006 Scale Nats Champions:
1:32 Eurosport - Paul Gawronski
AM GT-12 - Zac Grinstead
Expert GT-12 - Herman James
C-12 Eurosport - Paul Gawronski
Am GTP - Chris Rodriguez, Jr.
Expert GTP - Duran Trujillo
Am GT1 - Ron Southern
Expert GT1 - Paul Gawronski
Jr Group 10 NASCAR - Zac Grinstead
Am Group 10 NASCAR - Zac Grinstead
Expert 4.5 NASCAR - Duran Trujillo
Expert Group 10 NASCAR - Duran Trujillo
Am 4.5 NASCAR - Bill Vanderziel
The President of the USRA, Chris Radisich, is considering sanctioning a "Division 3" which will be for vintage-type or retro slot racing cars. The rules and Division 3 series are at this moment still evolving, but the purpose is to create a class where the cars raced are easily recognized and to shift away from expensive high tech componentry.
The 25th World Slot Car Championship (aka "The Worlds") was held May 17–21, 2006 in Rio De Janeiro, Brazil at Top Slot Raceways. It was sanctioned by the NPRA which is a South American slot racing federation.
2006 Worlds Champions:
Group 7 (open) - Joao Carlos Geraldo
Note: this article concerns slot car racing competition. For information on the general slot car hobby, including more detailed coverage of history, scales, track-types and mechanical functioning, see slot car
.
Slot car racing (also called slotcar racing or slot racing) is the competitive hobby
of racing
with powered miniature autos (or other vehicles) which are guided by grooves or slots in the track on which they run.
Slot car
s are usually models of actual automobiles, though some have bodies purpose-designed for miniature racing. Most enthusiasts use commercially-available slot cars (often modified for better performance), others motorize static models, and some "scratch-build," creating their own mechanisms and bodies from basic parts and materials.
Slot car racing ranges from casual get-togethers at home tracks, using whatever cars the host makes available, to very serious competitions in which contestants painstakingly build or modify their own cars for maximum performance and compete in a series of races culminating in a national championship. Some hobbyists, much as in model railroading, build elaborate tracks, sculpted to have the appearance of a real-life racecourse, including miniature buildings, trees and people, while the more serious competitive racers often prefer a track unobstructed by scenery.
Slot car racing was a popular fad in the 1960s, with sales reaching $500 million annually, including 3,000 public courses in the United States alone. The fad sputtered out by the start of the 1970s as amateurs felt squeezed out at races and stayed home.
There are three common slotcar scales
used for competition:
In addition to the major scales, 1:43 in 2006 slot car sets are generally marketed as children's toys. So far, there is little organized competition in 1:43, but the scale is gaining some acceptance among adult hobbyists for its affordability and moderate space requirements. An average car would be 4.3" (10.9 cm).
Shop and club tracks used for competition (especially in 1:32 and 1:24 scales) are usually hand built "Routed Tracks" in which the guide slots for the entire racecourse are routed into one or a few large pieces of sheet material (such as chipboard
or Medium-density fibreboard
) providing a smooth and consistent surface.
Competition tracks are usually laid out as road courses with many turns, though ovals and "tank tread" (trapezoidal) ovals are also fairly common. On a road course or oval, each car and each lane is generally marked with "lane tape" of a distinguishing color, allowing the corner marshals (officials) to return cars that have spun off the track to the proper lane.
Generally, tracks for formal competition may have banked corners and may bridge one section over another, but may not otherwise use "trick" configurations. Home tracks often include special features to increase the drama and/or challenge of racing, such as slots that wiggle or squeeze the lanes together, bumps, airborne jumps, or uneven surfaces, but these are typically called "toy" tracks and are not used for competition.
A different segment of the hobby is slot car drag racing
on a long straight strip of track. In HO size, these dragstrips are often a scale quarter-mile.
1:24 Scale tracks used for competition are generally 6-8 lane routed tracks with either wooden or flexible plastic retaining walls. The tracks are usually located in commercial or purpose-built racing centres. Most of the tracks used in the USRA regional and national events are either original American Raceways (AMF) commercial tracks or variations of these designs made from original blueprints. Tracks used in other countries, including those used for the ISRA World Championships are often more recent designs. Generally tracks used for regional or national competition have an epoxy or polymer painted surface with recessed braided electrical contacts. In USRA Division 1, the use of traction-enhancing compounds on the racing surface ("glue" or "goop") may be applied to the racing surface by the competitors.
One type of 1:24 commercial track is the "Blue King" (155 foot lap length) which is the track that is recognized for world records in 1:24 racing. The 2007 world record qualifying lap is held by Paul Pedersen at 1.404 seconds, which computes to 75.2 mph. The "King" track segments are "named" starting from the main straight in an anti-clock wise direction: bank, chute, deadman (corner), finger, back straight, 90 (corner), donut (corner), lead-on, and top-turn. Generally the "King" tracks are used for wing-car racing, where un-banked "flat" tracks of various designs are used for scale racing. An example of a championship "flat" track is the Gary Gerding designed track installed in July 2007 at Mid-America Raceway and Hobbies near Aurora, IL (the site of the 2009 USRA Division 2 National Championships)and the 2010 ISRA world championships.
Another example of a 1:24 scale track is called the "Engleman Grandstand". It is 220 foot in lap length and eight lanes wide. It is a favorite for fast cars with it's long straights and high deep bank. One can be found still in operation in Rock Hill, South Carolina at The Slot Car Cave.
1:32 Scale competition is generally run on the same routed tracks as 1:24, at least in the USA.
HO Scale competition tracks are typically between 60 and 100 ft in length and 4 to 6 lanes wide. Plastic tracks, often modified for improved performance, are more common in HO competition than in the larger scales, as is the use of large home courses for formal racing.
'Dirty' tracks - these tracks are mainly used for rally and raid.
Many tracks use banks of lead-acid batteries to produce sufficient high amp DC power, but in recent years, relatively inexpensive high-quality electronically-regulated power supplies have become more popular to achieve consistent and clean power.
The second (and most common) way to run a round robin is to have four drivers (or as many as there are lanes) start at a time, and rotate through all the lanes, before being replaced by the next set of drivers. This is known as a "heat" or "consi". Often a small amount of practice time (usually 30 seconds) will be given to the drivers prior to the start of each heat. If there are an odd number of drivers such that they are not wholly divisible into the number of lanes, one of two measures is taken: either a heat is run with one or more positions unfilled, or a heat is run with extra drivers, with a "sit-out" position. After all drivers have run their heat, placement is determined by total laps completed.
Often round robins are modified to include a "main" and sometimes also a "last-chance" heat. When run with a main, the round robin is run as normal, but at the end the top competitors (as many as there are lanes) run an extra heat. This heat is usually longer (3 to 5 minutes per segment, 1.5 "pit" time, and 1 minute practice before the heat). At the end the drivers are re-placed based on the new lap totals.
Last-chance heats are similar to mains. The top competitors (number of lanes minus one) from the round robin move into the main, and the runners-up (as many as there are lanes) are moved into the last chance heat. The last chance heat is run before the main, and is usually run with the same time parameters as the other heats. At the end, the top competitors from the last-chance are re-placed based on their new lap totals (though never lower than a comptetitor that didn't make the last-chance), and the winner of the heat moves into the final position in the main.
Bracketed formats are usually reserved for national events, and include qualifying, elimination consis, semifinals, and a main.
When the segment time has elapsed, a small amount of time, usually one minute, is given for the driver to switch lanes, perform any necessary maintenance to his car, and return his car to its resting position (albeit in a different lane). At the same time, the next driver in the succession moves into the first lane, placing his car at the starting position. When a driver completes all the lanes, his total laps and final position are recorded. This continues until all drivers have completed all lanes. Lap totals are compared to determine placement.
Most racing organisations allow a "track call" (where the power is turned off) for a situation where a race car is in the wrong lane. This is also referred to as a "rider" and is considered to be a dangerous and unfair situation. Track calls are also sometimes used in the event that a car flies off the table and cannot be located by a marshal.
There are many different local, regional, national, and international organizations for 1:24 scale slot cars. 1:24 scale is primarily raced at commercial slot car raceways. The largest USA organisation, holding 2 Divisional USA National Championship events every year, is the USRA: United Slot Racers Association. The International Slot Racing Association (ISRA) sanctions a World Slot Car Racing Championship in a different country every year.
National Slot Car Scale Racing Association known as NSCSRA. NSCSRA formed in 1989 for the purpose of promoting "Fair and Equal Racing for all" who enjoyed slot cars as a hobby. The rules were established in 1989 to insure the fair and equal racing concept for all participants. Up to four times a year NSCSRA holds a Championship for various classes including Vintage Scale Racing, Flexi and Unlimited Racing. The Famous "Top Gunner" Championship recently crowned a two Champion Jim "Mr. B" Bronson. Bronson joins Top Gunner Champions Bryan "Captain Snoozy" Proctor (3 times, 1 time NON PRO, 2 PRO), Casey Kennedy (6 times PRO), Kaitlyn White (2 Times NON PRO) as mulitple times Champion. The most recent Championship held in early 2009 crowned Bronson as Pro and Don Sims as Non Pro Champions at Tuff Traxx Hobbies and Slot Car Raceway In Mesa, Arizona.
1:32 scale racing organizations
The International Slot Racing Association (ISRA) sanctions a World Slot Car Racing Championship in a different country every year.
In 2004, the True Scale Racing Federation (TSRF) was established by former pro 1:24 racer Phillipe de Lespinay (aka: PdL) with the goal being to establish a North American "true scale" 1:24 and 1:32 North American racing series. The TSRF concept is very similar to full-scale "spec" racing where only TSRF approved equipment can be used for competition. Many other countries have national organisations, for example the The British Slot Car Racing Association (BSCRA) have been running national championships since 1964.
HO Organizations
There are two large HO racing organizations in the US: HOPRA (the HO Professional Racing Association) and UFHORA (the United Federation of HO Racers Association). Each hosts a national competition annually, usually in July. There are many state-wide organizations running under HOPRA and/or UFHORA rule sets.
"The Fray In Ferndale", California
boasts the largest turnout of any slot car race in the world. The highly competitive race is held yearly, in February, and more than 100 individuals, and 16 teams, show up to race on 8 tables. This is the race that determines the direction that the hobby takes, regarding the venerable Aurora Thunderjet. The race has been held since 1997.
Unlike 1:24 scale tracks, HO race tracks can be small enough to fit in common basements. Therefore, most state organizations run some, if not most, of their series on home tracks as opposed to hobby shop tracks. Additionally, home tracks are often used for national competition.
HO Scale Oval racing is very popular in the Northeastern USA. The cars are molded to look like Dirt Modifieds and Sprint Cars. The Sprint Cars and Dirt Modified cars are raced on oval tracks anywhere from 8 lanes to 4 lanes.
1:24 racing classes
USRA division 1
There is also a class in its genesis called "One Motor Only" that is similar to Group 7 with the difference being that motor changes after tech are not allowed.
USRA division 2
USRA division 3: (proposed)
Note: in spite of the USRA not yet recognizing "Division 3", independent sanctioning bodies on the east and west coast have been organizing and hosting Nostalgia Can-Am and Nostalgia F1 races. Interest has been growing in a "spec" Can Am class which is expected to begin having major events in 2009.
Formula-2000
F-2000 is raced primarily in the midwest; it is a variation of the USRA Division 1 rules with the prime exception being traction/braking "glue" is not allowed to be applied to the racing surface by participants. Motor changes once the race has started are not allowed, and there are other rules restrictions intended to reduce the cost of participation.
Other international organisations such as the IMCA and ISRA have their own classifications and technical regulations. Contact the organisation directly for their latest rules and series schedule.
1:32 Racing Classes
HO Racing Classes
HOPRA and UFHORA run similar classes and similar rules for those classes. The following are brief explanations of some of those classes. General rules specify the size of the car and anything else that pertains to all classes.
ISRA
The 2011 championships at redfox raceway was held on the 1st-8th October, in an historic moment that is sure to not be repeated for a long time Paulo Trigillo of Italy won all 4 classes allbeit one was with Swedens Michael Landrud. The 2012 competition will be held in Sweden.
USRA
The 2010 Division 1 (Wing) Nationals (or "Nats") were held at The Track in Dallas, Texas at Dallas slot cars July 30- August 8.
2010 Wing Car USA Nats Champions:
Semi-Pro Group 7: Petr Krcil
Pro Group 7: Richard Cunutte
Theseare the only winners I could find off the site, sorry
The 2006 Division 2 (Scale) Nationals were held at Slot Car Raceway in Rohnert Park, CA starting on April 18 and concluding on April 23.
2006 Scale Nats Champions:
1:32 Eurosport - Paul Gawronski
AM GT-12 - Zac Grinstead
Expert GT-12 - Herman James
C-12 Eurosport - Paul Gawronski
Am GTP - Chris Rodriguez, Jr.
Expert GTP - Duran Trujillo
Am GT1 - Ron Southern
Expert GT1 - Paul Gawronski
Jr Group 10 NASCAR - Zac Grinstead
Am Group 10 NASCAR - Zac Grinstead
Expert 4.5 NASCAR - Duran Trujillo
Expert Group 10 NASCAR - Duran Trujillo
Am 4.5 NASCAR - Bill Vanderziel
The President of the USRA, Chris Radisich, is considering sanctioning a "Division 3" which will be for vintage-type or retro slot racing cars. The rules and Division 3 series are at this moment still evolving, but the purpose is to create a class where the cars raced are easily recognized and to shift away from expensive high tech componentry.
The 25th World Slot Car Championship (aka "The Worlds") was held May 17–21, 2006 in Rio De Janeiro, Brazil at Top Slot Raceways. It was sanctioned by the NPRA which is a South American slot racing federation.
2006 Worlds Champions:
Group 7 (open) - Joao Carlos Geraldo
Slot car
A slot car is a powered miniature auto or other vehicle that is guided by a groove or slot in the track on which it runs. A pin or blade extends from the bottom of the car into the slot...
.
Hobby
A hobby is a regular activity or interest that is undertaken for pleasure, typically done during one's leisure time.- Etymology :A hobby horse is a wooden or wickerwork toy made to be ridden just like a real horse...
of racing
Racing
A sport race is a competition of speed, against an objective criterion, usually a clock or to a specific point. The competitors in a race try to complete a given task in the shortest amount of time...
with powered miniature autos (or other vehicles) which are guided by grooves or slots in the track on which they run.
Slot car
Slot car
A slot car is a powered miniature auto or other vehicle that is guided by a groove or slot in the track on which it runs. A pin or blade extends from the bottom of the car into the slot...
s are usually models of actual automobiles, though some have bodies purpose-designed for miniature racing. Most enthusiasts use commercially-available slot cars (often modified for better performance), others motorize static models, and some "scratch-build," creating their own mechanisms and bodies from basic parts and materials.
Slot car racing ranges from casual get-togethers at home tracks, using whatever cars the host makes available, to very serious competitions in which contestants painstakingly build or modify their own cars for maximum performance and compete in a series of races culminating in a national championship. Some hobbyists, much as in model railroading, build elaborate tracks, sculpted to have the appearance of a real-life racecourse, including miniature buildings, trees and people, while the more serious competitive racers often prefer a track unobstructed by scenery.
Slot car racing was a popular fad in the 1960s, with sales reaching $500 million annually, including 3,000 public courses in the United States alone. The fad sputtered out by the start of the 1970s as amateurs felt squeezed out at races and stayed home.
Common slot car scales
Scale (ratio)
The scale ratio of some sort of model which represents an original proportionally is the ratio of a linear dimension of the model to the same dimension of the original. Examples include a 3-dimensional scale model of a building or the scale drawings of the elevations or plans of a building. In such...
used for competition:
- 1:24 scale1:24 scale1:24 is a very popular size for Die-cast toy vehicles, which are collected by children and adults. Primarily automobiles are made in this scale, with a few examples of tractor trailers and other larger equipment. Plastic automobile kits are frequently made in this scale.1:24 is the largest of the...
or 1/24, cars are the largest slot cars commonly raced. A typical 1:24 car might be 7 to 8 inches long (18–20 cm). 1:24 cars require a course so relatively large as to be impractical for many home enthusiasts, so most serious 1:24 racing is done at commercial or club tracks. - 1:32 scale1:32 scale1:32 scale is a traditional scale for models and miniatures, in which one unit on the model represents 32 units on the actual object. It is also known as "three-eighths scale", since 3/8-inch represents a foot...
or 1/32, cars are smaller and more suited to home-sized race courses but they are also widely raced on commercial tracks, in hobby shops or in clubs. A 1:32 car averages 5 to 6 inches (13–15 cm). - HO scaleHO scaleHO or H0 is the most popular scale of model railway in the world.According to the NMRA standard S-1.2 predominantly used in North America, in HO scale, represents 1 real foot ; this ratio works out to about 1:87.1. According to the MOROP standard NEM 010 predominantly used in Europe, the scale is...
, a generalized size, originally 1:76OO gaugeOO gauge or OO scale model railways are the most popular standard-gauge model railway tracks in the U.K. This track gauge is one of several 4mm-scale standards used, but it is the only one to be served by the major manufacturers...
-1:87, now usually closer to 1:64 scale1:64 scale1:64 scale is a traditional scale for models and miniatures, in which one unit on the model represents 64 units on the actual object. It is also known as "three-sixteenths scale", since 3/16-inch represents a foot. A man is approximately 1-1/8 inches tall in 1:64 scale...
. Cars vary in size, running from 1:87 (generally the older cars) to 1:64 in scale; but they all run on track of approximately the same width, and are generically referred to as HO slot cars. A typical car is from 2.5 to 3.5 inches (5.5–8 cm). Though there is HO racing on commercial and shop-tracks, probably most HO racing occurs on home racetracks.
In addition to the major scales, 1:43 in 2006 slot car sets are generally marketed as children's toys. So far, there is little organized competition in 1:43, but the scale is gaining some acceptance among adult hobbyists for its affordability and moderate space requirements. An average car would be 4.3" (10.9 cm).
Slot car tracks for competition
Many home racetracks are made from the injection molded-plastic snap together track sections found in race sets; these courses are known as "Plastic Tracks".Shop and club tracks used for competition (especially in 1:32 and 1:24 scales) are usually hand built "Routed Tracks" in which the guide slots for the entire racecourse are routed into one or a few large pieces of sheet material (such as chipboard
Particle board
Particle board, or particleboard , is an engineered wood product manufactured from wood particles, such as wood chips, sawmill shavings, or even saw dust, and a synthetic resin or other suitable binder, which is pressed and extruded...
or Medium-density fibreboard
Medium-density fibreboard
Medium-density fiberboard is an engineered wood product formed by breaking down hardwood or softwood residuals into wood fibres, often in a defibrator, combining it with wax and a resin binder, and forming panels by applying high temperature and pressure...
) providing a smooth and consistent surface.
Competition tracks are usually laid out as road courses with many turns, though ovals and "tank tread" (trapezoidal) ovals are also fairly common. On a road course or oval, each car and each lane is generally marked with "lane tape" of a distinguishing color, allowing the corner marshals (officials) to return cars that have spun off the track to the proper lane.
Generally, tracks for formal competition may have banked corners and may bridge one section over another, but may not otherwise use "trick" configurations. Home tracks often include special features to increase the drama and/or challenge of racing, such as slots that wiggle or squeeze the lanes together, bumps, airborne jumps, or uneven surfaces, but these are typically called "toy" tracks and are not used for competition.
A different segment of the hobby is slot car drag racing
Drag racing
Drag racing is a competition in which specially prepared automobiles or motorcycles compete two at a time to be the first to cross a set finish line, from a standing start, in a straight line, over a measured distance, most commonly a ¼-mile straight track....
on a long straight strip of track. In HO size, these dragstrips are often a scale quarter-mile.
1:24 Scale tracks used for competition are generally 6-8 lane routed tracks with either wooden or flexible plastic retaining walls. The tracks are usually located in commercial or purpose-built racing centres. Most of the tracks used in the USRA regional and national events are either original American Raceways (AMF) commercial tracks or variations of these designs made from original blueprints. Tracks used in other countries, including those used for the ISRA World Championships are often more recent designs. Generally tracks used for regional or national competition have an epoxy or polymer painted surface with recessed braided electrical contacts. In USRA Division 1, the use of traction-enhancing compounds on the racing surface ("glue" or "goop") may be applied to the racing surface by the competitors.
One type of 1:24 commercial track is the "Blue King" (155 foot lap length) which is the track that is recognized for world records in 1:24 racing. The 2007 world record qualifying lap is held by Paul Pedersen at 1.404 seconds, which computes to 75.2 mph. The "King" track segments are "named" starting from the main straight in an anti-clock wise direction: bank, chute, deadman (corner), finger, back straight, 90 (corner), donut (corner), lead-on, and top-turn. Generally the "King" tracks are used for wing-car racing, where un-banked "flat" tracks of various designs are used for scale racing. An example of a championship "flat" track is the Gary Gerding designed track installed in July 2007 at Mid-America Raceway and Hobbies near Aurora, IL (the site of the 2009 USRA Division 2 National Championships)and the 2010 ISRA world championships.
Another example of a 1:24 scale track is called the "Engleman Grandstand". It is 220 foot in lap length and eight lanes wide. It is a favorite for fast cars with it's long straights and high deep bank. One can be found still in operation in Rock Hill, South Carolina at The Slot Car Cave.
1:32 Scale competition is generally run on the same routed tracks as 1:24, at least in the USA.
HO Scale competition tracks are typically between 60 and 100 ft in length and 4 to 6 lanes wide. Plastic tracks, often modified for improved performance, are more common in HO competition than in the larger scales, as is the use of large home courses for formal racing.
'Dirty' tracks - these tracks are mainly used for rally and raid.
Electrical (power) standards for competition
1:24 racing is usually at 14 volts for qualifying and 12 volts under racing conditions. 1:32 racing is between 12 and 16 volts depending on type of car. Most HO rules require tracks to provide voltage between 18.5 and 19.0 volts, and at least 5 amperes per lane. Certain European 1/24 "scale" racing events use 18.2 to 19.0 volts DC.Many tracks use banks of lead-acid batteries to produce sufficient high amp DC power, but in recent years, relatively inexpensive high-quality electronically-regulated power supplies have become more popular to achieve consistent and clean power.
Competition formats
Several race formats are employed in competition as time allows. The quickest to run is called round robin, which can be run in either of two ways. The first (and least common) way is begin with one driver on one lane of the track, a segment usually consisting of 2 minutes is run in which the driver attempts to complete as many laps as he can.The second (and most common) way to run a round robin is to have four drivers (or as many as there are lanes) start at a time, and rotate through all the lanes, before being replaced by the next set of drivers. This is known as a "heat" or "consi". Often a small amount of practice time (usually 30 seconds) will be given to the drivers prior to the start of each heat. If there are an odd number of drivers such that they are not wholly divisible into the number of lanes, one of two measures is taken: either a heat is run with one or more positions unfilled, or a heat is run with extra drivers, with a "sit-out" position. After all drivers have run their heat, placement is determined by total laps completed.
Often round robins are modified to include a "main" and sometimes also a "last-chance" heat. When run with a main, the round robin is run as normal, but at the end the top competitors (as many as there are lanes) run an extra heat. This heat is usually longer (3 to 5 minutes per segment, 1.5 "pit" time, and 1 minute practice before the heat). At the end the drivers are re-placed based on the new lap totals.
Last-chance heats are similar to mains. The top competitors (number of lanes minus one) from the round robin move into the main, and the runners-up (as many as there are lanes) are moved into the last chance heat. The last chance heat is run before the main, and is usually run with the same time parameters as the other heats. At the end, the top competitors from the last-chance are re-placed based on their new lap totals (though never lower than a comptetitor that didn't make the last-chance), and the winner of the heat moves into the final position in the main.
Bracketed formats are usually reserved for national events, and include qualifying, elimination consis, semifinals, and a main.
When the segment time has elapsed, a small amount of time, usually one minute, is given for the driver to switch lanes, perform any necessary maintenance to his car, and return his car to its resting position (albeit in a different lane). At the same time, the next driver in the succession moves into the first lane, placing his car at the starting position. When a driver completes all the lanes, his total laps and final position are recorded. This continues until all drivers have completed all lanes. Lap totals are compared to determine placement.
Most racing organisations allow a "track call" (where the power is turned off) for a situation where a race car is in the wrong lane. This is also referred to as a "rider" and is considered to be a dangerous and unfair situation. Track calls are also sometimes used in the event that a car flies off the table and cannot be located by a marshal.
Slot racing organizations
1:24 scale racing organizationsThere are many different local, regional, national, and international organizations for 1:24 scale slot cars. 1:24 scale is primarily raced at commercial slot car raceways. The largest USA organisation, holding 2 Divisional USA National Championship events every year, is the USRA: United Slot Racers Association. The International Slot Racing Association (ISRA) sanctions a World Slot Car Racing Championship in a different country every year.
National Slot Car Scale Racing Association known as NSCSRA. NSCSRA formed in 1989 for the purpose of promoting "Fair and Equal Racing for all" who enjoyed slot cars as a hobby. The rules were established in 1989 to insure the fair and equal racing concept for all participants. Up to four times a year NSCSRA holds a Championship for various classes including Vintage Scale Racing, Flexi and Unlimited Racing. The Famous "Top Gunner" Championship recently crowned a two Champion Jim "Mr. B" Bronson. Bronson joins Top Gunner Champions Bryan "Captain Snoozy" Proctor (3 times, 1 time NON PRO, 2 PRO), Casey Kennedy (6 times PRO), Kaitlyn White (2 Times NON PRO) as mulitple times Champion. The most recent Championship held in early 2009 crowned Bronson as Pro and Don Sims as Non Pro Champions at Tuff Traxx Hobbies and Slot Car Raceway In Mesa, Arizona.
1:32 scale racing organizations
The International Slot Racing Association (ISRA) sanctions a World Slot Car Racing Championship in a different country every year.
In 2004, the True Scale Racing Federation (TSRF) was established by former pro 1:24 racer Phillipe de Lespinay (aka: PdL) with the goal being to establish a North American "true scale" 1:24 and 1:32 North American racing series. The TSRF concept is very similar to full-scale "spec" racing where only TSRF approved equipment can be used for competition. Many other countries have national organisations, for example the The British Slot Car Racing Association (BSCRA) have been running national championships since 1964.
HO Organizations
There are two large HO racing organizations in the US: HOPRA (the HO Professional Racing Association) and UFHORA (the United Federation of HO Racers Association). Each hosts a national competition annually, usually in July. There are many state-wide organizations running under HOPRA and/or UFHORA rule sets.
"The Fray In Ferndale", California
Ferndale, California
Ferndale is a city in Humboldt County, California, United States. Known for its well-preserved Victorian buildings, the city's population was 1,371 at the 2010 census, down from 1,382 at the 2000 census...
boasts the largest turnout of any slot car race in the world. The highly competitive race is held yearly, in February, and more than 100 individuals, and 16 teams, show up to race on 8 tables. This is the race that determines the direction that the hobby takes, regarding the venerable Aurora Thunderjet. The race has been held since 1997.
Unlike 1:24 scale tracks, HO race tracks can be small enough to fit in common basements. Therefore, most state organizations run some, if not most, of their series on home tracks as opposed to hobby shop tracks. Additionally, home tracks are often used for national competition.
HO Scale Oval racing is very popular in the Northeastern USA. The cars are molded to look like Dirt Modifieds and Sprint Cars. The Sprint Cars and Dirt Modified cars are raced on oval tracks anywhere from 8 lanes to 4 lanes.
1:24 racing classes
Most 1:24 racing series use some variation of the USRA Division 1 or Division 2 rules. The USRA rules have their roots in the NCC rules of 1971 which were written with the goal of making a number of under-classes in slot racing to allow more diversity in competition.USRA division 1
- a) Spec-15: Amateur only
- b) GP-12: Amateur and Expert
- c) International 15 (15A): Amateur and Expert
- d) Cobalt 12/15: Amateur and Expert
- e) Group 27: Amateur and Expert
- f) Group 7 (open): Semi-Pro and Pro
There is also a class in its genesis called "One Motor Only" that is similar to Group 7 with the difference being that motor changes after tech are not allowed.
USRA division 2
- a) Group 10 Stock Car
- b) JRL
- c) GTP
- d) GT-1
- e) GT-12
- f) C-12e
- g) 1/32 F-1 Eurosport
- h) 1/32 Eurosport
- i) 1/24 Eurosport
USRA division 3: (proposed)
- a) Nostalgia Can-Am
- b) Vintage NASCAR
- c) Nostalgia F1
- d) TSR
- e) Vintage "Thingie"
Note: in spite of the USRA not yet recognizing "Division 3", independent sanctioning bodies on the east and west coast have been organizing and hosting Nostalgia Can-Am and Nostalgia F1 races. Interest has been growing in a "spec" Can Am class which is expected to begin having major events in 2009.
Formula-2000
F-2000 is raced primarily in the midwest; it is a variation of the USRA Division 1 rules with the prime exception being traction/braking "glue" is not allowed to be applied to the racing surface by participants. Motor changes once the race has started are not allowed, and there are other rules restrictions intended to reduce the cost of participation.Other international organisations such as the IMCA and ISRA have their own classifications and technical regulations. Contact the organisation directly for their latest rules and series schedule.
1:32 Racing Classes
Many types of races exist for 1:32 Racing Classes.- Speed
- Rally - world rally cars, production, super 1600, ...
- Raid - T1, T2, T3, T4, T5
To note that in rally and raid races it is frequent to include 'dirty' races, e.g. snow or dirt.
HO Racing Classes
HOPRA and UFHORA run similar classes and similar rules for those classes. The following are brief explanations of some of those classes. General rules specify the size of the car and anything else that pertains to all classes.- Superstock (HOPRA and UFHORA): Cars may have at most four magnets (two to drive the motor and two "traction" magnets for additional downforce). All magnets must be ceramic. Motors must be stock, and may be balanced and/or trued (referred to as "hot-stock").
- Modified (HOPRA): Also known as "ceramic modified" is the same as superstock above, but the motor is unrestricted and the chassis may be sanded.
- Modified (UFHORA): Cars may have at most four magnets (2 to drive the motor and 2 "traction" magnets for additional downforce). Motor magnets must be ceramic, traction magnets may be polymer. Motor must have a resistance of no less than 3.0 Ω on each pole.
- Polymer Modified (HOPRA)/Restricted Open (UFHORA): Cars may have at most four magnets (two to drive the motor and two "traction" magnets for additional downforce). All magnets may be polymer. Motor is unrestricted. Chassis may be sanded. Shunt wires may be used.
- Unlimited (UFHORA and HOPRA): No restrictions. Custom chassis permitted. Six neodymium magnets are usually employed.
Current standings
ISRA 2010 World Driver Rankings A.K.A.| Ranked | Driver | Country |
|---|---|---|
| 1 | Vladimir Horky | CZE |
| 2 | Antonin Vojtik | CZE |
| 3 | Piero Castricone | ITA |
| 4 | Petr Krcil | CZE |
| 5 | Matti Fyhr | FIN |
| 6 | Brian Saunders | GBR |
| 7 | Paul Gawronski | USA |
| 8 | Raivis Jansons | LAT |
| 9 | jiri Karlik | CZE |
| 10 | Paolo Trigilio | ITA |
| 11 | Greg Gilbert | USA |
| 12 | James Cleave | GBR |
| 13 | Micheal Landrud | SWE |
| 14 | Miroslav Vadlejch | CZE |
| 15 | Janis Rage-Ragis | LAT |
ISRA
The 2011 championships at redfox raceway was held on the 1st-8th October, in an historic moment that is sure to not be repeated for a long time Paulo Trigillo of Italy won all 4 classes allbeit one was with Swedens Michael Landrud. The 2012 competition will be held in Sweden.
USRA
The 2010 Division 1 (Wing) Nationals (or "Nats") were held at The Track in Dallas, Texas at Dallas slot cars July 30- August 8.
2010 Wing Car USA Nats Champions:
Semi-Pro Group 7: Petr Krcil
Pro Group 7: Richard Cunutte
Theseare the only winners I could find off the site, sorry
The 2006 Division 2 (Scale) Nationals were held at Slot Car Raceway in Rohnert Park, CA starting on April 18 and concluding on April 23.
2006 Scale Nats Champions:
1:32 Eurosport - Paul Gawronski
AM GT-12 - Zac Grinstead
Expert GT-12 - Herman James
C-12 Eurosport - Paul Gawronski
Am GTP - Chris Rodriguez, Jr.
Expert GTP - Duran Trujillo
Am GT1 - Ron Southern
Expert GT1 - Paul Gawronski
Jr Group 10 NASCAR - Zac Grinstead
Am Group 10 NASCAR - Zac Grinstead
Expert 4.5 NASCAR - Duran Trujillo
Expert Group 10 NASCAR - Duran Trujillo
Am 4.5 NASCAR - Bill Vanderziel
The President of the USRA, Chris Radisich, is considering sanctioning a "Division 3" which will be for vintage-type or retro slot racing cars. The rules and Division 3 series are at this moment still evolving, but the purpose is to create a class where the cars raced are easily recognized and to shift away from expensive high tech componentry.
The 25th World Slot Car Championship (aka "The Worlds") was held May 17–21, 2006 in Rio De Janeiro, Brazil at Top Slot Raceways. It was sanctioned by the NPRA which is a South American slot racing federation.
2006 Worlds Champions:
Group 7 (open) - Joao Carlos Geraldo
External links
- http://www.isra-brazil.com.br/results_2011.html ISRA results and other info.
- Slot Car Illustrated - Largest Forum for US Racers 1/32 and 1/24, News and Reviews
- Slot Forum International - very popular English language forum
- Racefun Club - Danish slot racing club fora and result page
- X-speedracing - Danish slot racing team home pag
- Rossendale Model Stock Car Club - RMSCC Home page
- International Slot Racing Association - ISRA Home page
- Slot Car Racing Directory and Search Engine
- Slot Forum in spanish A Spanish slot forum
- The origins of slot car racing
- A history of commercial slot racing
- Track Hobbies - F1 HO Slot Cars - All Manufacturers
- Auslot Forums- Australian Slot Car Discussion Forum
- British Slot Car Racing Association
- BW-Slot - German 1/43 site (also in English)
- E-Ticket Racing Slotcar Drag Racing Site
- Home Racing World- Reviews, How-To, Forum, great for new folks who want to learn
- HO Slot Car Racing
- Digital Slot Car Racing
- HO Slot Racing News, Blog, and Forum
- OWH Slot Car Talk and Online News
- Scale Auto Racing News - reporting since 1979
- Slotblog! One of the busiest slot car forums and home of the Retro racing movement.
- Slot Car Links- 444 up to date slot car links and websites
- SlotSide
- Raceset - Independent Slot Car Reviews
- NSCC - UK National Scalextric Collectors' Club
- United Slot Racer's Association - USRA Home Page
- Southern California USRA - Southern California Slot Car Racing Information
- Slot Racing Blog and Portal - Racing Information and News From Around the World
- Cheryco - manufacturers of Japanese Slotcar racing.
- IMCA International Model Car Association - Worldwide Slot Car Racing Organization
- WSMCR.com - Sydney 1/24 drag racing
- XSRDragRacing.com - Western Australian 1/24 drag racing
- Mid-America Raceway and Hobbies - Site of the 2009 USRA Division 2 National Championships
- Scale Racing America Governing body for 1/24 Model Car Racing in North America
- Italian Slot Portal All news and competition of slot in Italy and Europe
- The Old Weird Herald - News, forums, race reports, tech tips, info, & fun - for "grown-ups" who still play with toy cars.
Note: this article concerns slot car racing competition. For information on the general slot car hobby, including more detailed coverage of history, scales, track-types and mechanical functioning, see slot car
Slot car
A slot car is a powered miniature auto or other vehicle that is guided by a groove or slot in the track on which it runs. A pin or blade extends from the bottom of the car into the slot...
.
Hobby
A hobby is a regular activity or interest that is undertaken for pleasure, typically done during one's leisure time.- Etymology :A hobby horse is a wooden or wickerwork toy made to be ridden just like a real horse...
of racing
Racing
A sport race is a competition of speed, against an objective criterion, usually a clock or to a specific point. The competitors in a race try to complete a given task in the shortest amount of time...
with powered miniature autos (or other vehicles) which are guided by grooves or slots in the track on which they run.
Slot car
Slot car
A slot car is a powered miniature auto or other vehicle that is guided by a groove or slot in the track on which it runs. A pin or blade extends from the bottom of the car into the slot...
s are usually models of actual automobiles, though some have bodies purpose-designed for miniature racing. Most enthusiasts use commercially-available slot cars (often modified for better performance), others motorize static models, and some "scratch-build," creating their own mechanisms and bodies from basic parts and materials.
Slot car racing ranges from casual get-togethers at home tracks, using whatever cars the host makes available, to very serious competitions in which contestants painstakingly build or modify their own cars for maximum performance and compete in a series of races culminating in a national championship. Some hobbyists, much as in model railroading, build elaborate tracks, sculpted to have the appearance of a real-life racecourse, including miniature buildings, trees and people, while the more serious competitive racers often prefer a track unobstructed by scenery.
Slot car racing was a popular fad in the 1960s, with sales reaching $500 million annually, including 3,000 public courses in the United States alone. The fad sputtered out by the start of the 1970s as amateurs felt squeezed out at races and stayed home.
Common slot car scales
There are three common slotcar scales
Scale (ratio)
The scale ratio of some sort of model which represents an original proportionally is the ratio of a linear dimension of the model to the same dimension of the original. Examples include a 3-dimensional scale model of a building or the scale drawings of the elevations or plans of a building. In such...
used for competition:
- 1:24 scale1:24 scale1:24 is a very popular size for Die-cast toy vehicles, which are collected by children and adults. Primarily automobiles are made in this scale, with a few examples of tractor trailers and other larger equipment. Plastic automobile kits are frequently made in this scale.1:24 is the largest of the...
or 1/24, cars are the largest slot cars commonly raced. A typical 1:24 car might be 7 to 8 inches long (18–20 cm). 1:24 cars require a course so relatively large as to be impractical for many home enthusiasts, so most serious 1:24 racing is done at commercial or club tracks. - 1:32 scale1:32 scale1:32 scale is a traditional scale for models and miniatures, in which one unit on the model represents 32 units on the actual object. It is also known as "three-eighths scale", since 3/8-inch represents a foot...
or 1/32, cars are smaller and more suited to home-sized race courses but they are also widely raced on commercial tracks, in hobby shops or in clubs. A 1:32 car averages 5 to 6 inches (13–15 cm). - HO scaleHO scaleHO or H0 is the most popular scale of model railway in the world.According to the NMRA standard S-1.2 predominantly used in North America, in HO scale, represents 1 real foot ; this ratio works out to about 1:87.1. According to the MOROP standard NEM 010 predominantly used in Europe, the scale is...
, a generalized size, originally 1:76OO gaugeOO gauge or OO scale model railways are the most popular standard-gauge model railway tracks in the U.K. This track gauge is one of several 4mm-scale standards used, but it is the only one to be served by the major manufacturers...
-1:87, now usually closer to 1:64 scale1:64 scale1:64 scale is a traditional scale for models and miniatures, in which one unit on the model represents 64 units on the actual object. It is also known as "three-sixteenths scale", since 3/16-inch represents a foot. A man is approximately 1-1/8 inches tall in 1:64 scale...
. Cars vary in size, running from 1:87 (generally the older cars) to 1:64 in scale; but they all run on track of approximately the same width, and are generically referred to as HO slot cars. A typical car is from 2.5 to 3.5 inches (5.5–8 cm). Though there is HO racing on commercial and shop-tracks, probably most HO racing occurs on home racetracks.
In addition to the major scales, 1:43 in 2006 slot car sets are generally marketed as children's toys. So far, there is little organized competition in 1:43, but the scale is gaining some acceptance among adult hobbyists for its affordability and moderate space requirements. An average car would be 4.3" (10.9 cm).
Slot car tracks for competition
Many home racetracks are made from the injection molded-plastic snap together track sections found in race sets; these courses are known as "Plastic Tracks".Shop and club tracks used for competition (especially in 1:32 and 1:24 scales) are usually hand built "Routed Tracks" in which the guide slots for the entire racecourse are routed into one or a few large pieces of sheet material (such as chipboard
Particle board
Particle board, or particleboard , is an engineered wood product manufactured from wood particles, such as wood chips, sawmill shavings, or even saw dust, and a synthetic resin or other suitable binder, which is pressed and extruded...
or Medium-density fibreboard
Medium-density fibreboard
Medium-density fiberboard is an engineered wood product formed by breaking down hardwood or softwood residuals into wood fibres, often in a defibrator, combining it with wax and a resin binder, and forming panels by applying high temperature and pressure...
) providing a smooth and consistent surface.
Competition tracks are usually laid out as road courses with many turns, though ovals and "tank tread" (trapezoidal) ovals are also fairly common. On a road course or oval, each car and each lane is generally marked with "lane tape" of a distinguishing color, allowing the corner marshals (officials) to return cars that have spun off the track to the proper lane.
Generally, tracks for formal competition may have banked corners and may bridge one section over another, but may not otherwise use "trick" configurations. Home tracks often include special features to increase the drama and/or challenge of racing, such as slots that wiggle or squeeze the lanes together, bumps, airborne jumps, or uneven surfaces, but these are typically called "toy" tracks and are not used for competition.
A different segment of the hobby is slot car drag racing
Drag racing
Drag racing is a competition in which specially prepared automobiles or motorcycles compete two at a time to be the first to cross a set finish line, from a standing start, in a straight line, over a measured distance, most commonly a ¼-mile straight track....
on a long straight strip of track. In HO size, these dragstrips are often a scale quarter-mile.
1:24 Scale tracks used for competition are generally 6-8 lane routed tracks with either wooden or flexible plastic retaining walls. The tracks are usually located in commercial or purpose-built racing centres. Most of the tracks used in the USRA regional and national events are either original American Raceways (AMF) commercial tracks or variations of these designs made from original blueprints. Tracks used in other countries, including those used for the ISRA World Championships are often more recent designs. Generally tracks used for regional or national competition have an epoxy or polymer painted surface with recessed braided electrical contacts. In USRA Division 1, the use of traction-enhancing compounds on the racing surface ("glue" or "goop") may be applied to the racing surface by the competitors.
One type of 1:24 commercial track is the "Blue King" (155 foot lap length) which is the track that is recognized for world records in 1:24 racing. The 2007 world record qualifying lap is held by Paul Pedersen at 1.404 seconds, which computes to 75.2 mph. The "King" track segments are "named" starting from the main straight in an anti-clock wise direction: bank, chute, deadman (corner), finger, back straight, 90 (corner), donut (corner), lead-on, and top-turn. Generally the "King" tracks are used for wing-car racing, where un-banked "flat" tracks of various designs are used for scale racing. An example of a championship "flat" track is the Gary Gerding designed track installed in July 2007 at Mid-America Raceway and Hobbies near Aurora, IL (the site of the 2009 USRA Division 2 National Championships)and the 2010 ISRA world championships.
Another example of a 1:24 scale track is called the "Engleman Grandstand". It is 220 foot in lap length and eight lanes wide. It is a favorite for fast cars with it's long straights and high deep bank. One can be found still in operation in Rock Hill, South Carolina at The Slot Car Cave.
1:32 Scale competition is generally run on the same routed tracks as 1:24, at least in the USA.
HO Scale competition tracks are typically between 60 and 100 ft in length and 4 to 6 lanes wide. Plastic tracks, often modified for improved performance, are more common in HO competition than in the larger scales, as is the use of large home courses for formal racing.
'Dirty' tracks - these tracks are mainly used for rally and raid.
Electrical (power) standards for competition
1:24 racing is usually at 14 volts for qualifying and 12 volts under racing conditions. 1:32 racing is between 12 and 16 volts depending on type of car. Most HO rules require tracks to provide voltage between 18.5 and 19.0 volts, and at least 5 amperes per lane. Certain European 1/24 "scale" racing events use 18.2 to 19.0 volts DC.Many tracks use banks of lead-acid batteries to produce sufficient high amp DC power, but in recent years, relatively inexpensive high-quality electronically-regulated power supplies have become more popular to achieve consistent and clean power.
Competition formats
Several race formats are employed in competition as time allows. The quickest to run is called round robin, which can be run in either of two ways. The first (and least common) way is begin with one driver on one lane of the track, a segment usually consisting of 2 minutes is run in which the driver attempts to complete as many laps as he can.The second (and most common) way to run a round robin is to have four drivers (or as many as there are lanes) start at a time, and rotate through all the lanes, before being replaced by the next set of drivers. This is known as a "heat" or "consi". Often a small amount of practice time (usually 30 seconds) will be given to the drivers prior to the start of each heat. If there are an odd number of drivers such that they are not wholly divisible into the number of lanes, one of two measures is taken: either a heat is run with one or more positions unfilled, or a heat is run with extra drivers, with a "sit-out" position. After all drivers have run their heat, placement is determined by total laps completed.
Often round robins are modified to include a "main" and sometimes also a "last-chance" heat. When run with a main, the round robin is run as normal, but at the end the top competitors (as many as there are lanes) run an extra heat. This heat is usually longer (3 to 5 minutes per segment, 1.5 "pit" time, and 1 minute practice before the heat). At the end the drivers are re-placed based on the new lap totals.
Last-chance heats are similar to mains. The top competitors (number of lanes minus one) from the round robin move into the main, and the runners-up (as many as there are lanes) are moved into the last chance heat. The last chance heat is run before the main, and is usually run with the same time parameters as the other heats. At the end, the top competitors from the last-chance are re-placed based on their new lap totals (though never lower than a comptetitor that didn't make the last-chance), and the winner of the heat moves into the final position in the main.
Bracketed formats are usually reserved for national events, and include qualifying, elimination consis, semifinals, and a main.
When the segment time has elapsed, a small amount of time, usually one minute, is given for the driver to switch lanes, perform any necessary maintenance to his car, and return his car to its resting position (albeit in a different lane). At the same time, the next driver in the succession moves into the first lane, placing his car at the starting position. When a driver completes all the lanes, his total laps and final position are recorded. This continues until all drivers have completed all lanes. Lap totals are compared to determine placement.
Most racing organisations allow a "track call" (where the power is turned off) for a situation where a race car is in the wrong lane. This is also referred to as a "rider" and is considered to be a dangerous and unfair situation. Track calls are also sometimes used in the event that a car flies off the table and cannot be located by a marshal.
Slot racing organizations
1:24 scale racing organizationsThere are many different local, regional, national, and international organizations for 1:24 scale slot cars. 1:24 scale is primarily raced at commercial slot car raceways. The largest USA organisation, holding 2 Divisional USA National Championship events every year, is the USRA: United Slot Racers Association. The International Slot Racing Association (ISRA) sanctions a World Slot Car Racing Championship in a different country every year.
National Slot Car Scale Racing Association known as NSCSRA. NSCSRA formed in 1989 for the purpose of promoting "Fair and Equal Racing for all" who enjoyed slot cars as a hobby. The rules were established in 1989 to insure the fair and equal racing concept for all participants. Up to four times a year NSCSRA holds a Championship for various classes including Vintage Scale Racing, Flexi and Unlimited Racing. The Famous "Top Gunner" Championship recently crowned a two Champion Jim "Mr. B" Bronson. Bronson joins Top Gunner Champions Bryan "Captain Snoozy" Proctor (3 times, 1 time NON PRO, 2 PRO), Casey Kennedy (6 times PRO), Kaitlyn White (2 Times NON PRO) as mulitple times Champion. The most recent Championship held in early 2009 crowned Bronson as Pro and Don Sims as Non Pro Champions at Tuff Traxx Hobbies and Slot Car Raceway In Mesa, Arizona.
1:32 scale racing organizations
The International Slot Racing Association (ISRA) sanctions a World Slot Car Racing Championship in a different country every year.
In 2004, the True Scale Racing Federation (TSRF) was established by former pro 1:24 racer Phillipe de Lespinay (aka: PdL) with the goal being to establish a North American "true scale" 1:24 and 1:32 North American racing series. The TSRF concept is very similar to full-scale "spec" racing where only TSRF approved equipment can be used for competition. Many other countries have national organisations, for example the The British Slot Car Racing Association (BSCRA) have been running national championships since 1964.
HO Organizations
There are two large HO racing organizations in the US: HOPRA (the HO Professional Racing Association) and UFHORA (the United Federation of HO Racers Association). Each hosts a national competition annually, usually in July. There are many state-wide organizations running under HOPRA and/or UFHORA rule sets.
"The Fray In Ferndale", California
Ferndale, California
Ferndale is a city in Humboldt County, California, United States. Known for its well-preserved Victorian buildings, the city's population was 1,371 at the 2010 census, down from 1,382 at the 2000 census...
boasts the largest turnout of any slot car race in the world. The highly competitive race is held yearly, in February, and more than 100 individuals, and 16 teams, show up to race on 8 tables. This is the race that determines the direction that the hobby takes, regarding the venerable Aurora Thunderjet. The race has been held since 1997.
Unlike 1:24 scale tracks, HO race tracks can be small enough to fit in common basements. Therefore, most state organizations run some, if not most, of their series on home tracks as opposed to hobby shop tracks. Additionally, home tracks are often used for national competition.
HO Scale Oval racing is very popular in the Northeastern USA. The cars are molded to look like Dirt Modifieds and Sprint Cars. The Sprint Cars and Dirt Modified cars are raced on oval tracks anywhere from 8 lanes to 4 lanes.
1:24 racing classes
Most 1:24 racing series use some variation of the USRA Division 1 or Division 2 rules. The USRA rules have their roots in the NCC rules of 1971 which were written with the goal of making a number of under-classes in slot racing to allow more diversity in competition.USRA division 1
- a) Spec-15: Amateur only
- b) GP-12: Amateur and Expert
- c) International 15 (15A): Amateur and Expert
- d) Cobalt 12/15: Amateur and Expert
- e) Group 27: Amateur and Expert
- f) Group 7 (open): Semi-Pro and Pro
There is also a class in its genesis called "One Motor Only" that is similar to Group 7 with the difference being that motor changes after tech are not allowed.
USRA division 2
- a) Group 10 Stock Car
- b) JRL
- c) GTP
- d) GT-1
- e) GT-12
- f) C-12e
- g) 1/32 F-1 Eurosport
- h) 1/32 Eurosport
- i) 1/24 Eurosport
USRA division 3: (proposed)
- a) Nostalgia Can-Am
- b) Vintage NASCAR
- c) Nostalgia F1
- d) TSR
- e) Vintage "Thingie"
Note: in spite of the USRA not yet recognizing "Division 3", independent sanctioning bodies on the east and west coast have been organizing and hosting Nostalgia Can-Am and Nostalgia F1 races. Interest has been growing in a "spec" Can Am class which is expected to begin having major events in 2009.
Formula-2000
F-2000 is raced primarily in the midwest; it is a variation of the USRA Division 1 rules with the prime exception being traction/braking "glue" is not allowed to be applied to the racing surface by participants. Motor changes once the race has started are not allowed, and there are other rules restrictions intended to reduce the cost of participation.Other international organisations such as the IMCA and ISRA have their own classifications and technical regulations. Contact the organisation directly for their latest rules and series schedule.
1:32 Racing Classes
Many types of races exist for 1:32 Racing Classes.- Speed
- Rally - world rally cars, production, super 1600, ...
- Raid - T1, T2, T3, T4, T5
To note that in rally and raid races it is frequent to include 'dirty' races, e.g. snow or dirt.
HO Racing Classes
HOPRA and UFHORA run similar classes and similar rules for those classes. The following are brief explanations of some of those classes. General rules specify the size of the car and anything else that pertains to all classes.- Superstock (HOPRA and UFHORA): Cars may have at most four magnets (two to drive the motor and two "traction" magnets for additional downforce). All magnets must be ceramic. Motors must be stock, and may be balanced and/or trued (referred to as "hot-stock").
- Modified (HOPRA): Also known as "ceramic modified" is the same as superstock above, but the motor is unrestricted and the chassis may be sanded.
- Modified (UFHORA): Cars may have at most four magnets (2 to drive the motor and 2 "traction" magnets for additional downforce). Motor magnets must be ceramic, traction magnets may be polymer. Motor must have a resistance of no less than 3.0 Ω on each pole.
- Polymer Modified (HOPRA)/Restricted Open (UFHORA): Cars may have at most four magnets (two to drive the motor and two "traction" magnets for additional downforce). All magnets may be polymer. Motor is unrestricted. Chassis may be sanded. Shunt wires may be used.
- Unlimited (UFHORA and HOPRA): No restrictions. Custom chassis permitted. Six neodymium magnets are usually employed.
Current standings
ISRA 2010 World Driver Rankings A.K.A.| Ranked | Driver | Country |
|---|---|---|
| 1 | Vladimir Horky | CZE |
| 2 | Antonin Vojtik | CZE |
| 3 | Piero Castricone | ITA |
| 4 | Petr Krcil | CZE |
| 5 | Matti Fyhr | FIN |
| 6 | Brian Saunders | GBR |
| 7 | Paul Gawronski | USA |
| 8 | Raivis Jansons | LAT |
| 9 | jiri Karlik | CZE |
| 10 | Paolo Trigilio | ITA |
| 11 | Greg Gilbert | USA |
| 12 | James Cleave | GBR |
| 13 | Micheal Landrud | SWE |
| 14 | Miroslav Vadlejch | CZE |
| 15 | Janis Rage-Ragis | LAT |
ISRA
The 2011 championships at redfox raceway was held on the 1st-8th October, in an historic moment that is sure to not be repeated for a long time Paulo Trigillo of Italy won all 4 classes allbeit one was with Swedens Michael Landrud. The 2012 competition will be held in Sweden.
USRA
The 2010 Division 1 (Wing) Nationals (or "Nats") were held at The Track in Dallas, Texas at Dallas slot cars July 30- August 8.
2010 Wing Car USA Nats Champions:
Semi-Pro Group 7: Petr Krcil
Pro Group 7: Richard Cunutte
Theseare the only winners I could find off the site, sorry
The 2006 Division 2 (Scale) Nationals were held at Slot Car Raceway in Rohnert Park, CA starting on April 18 and concluding on April 23.
2006 Scale Nats Champions:
1:32 Eurosport - Paul Gawronski
AM GT-12 - Zac Grinstead
Expert GT-12 - Herman James
C-12 Eurosport - Paul Gawronski
Am GTP - Chris Rodriguez, Jr.
Expert GTP - Duran Trujillo
Am GT1 - Ron Southern
Expert GT1 - Paul Gawronski
Jr Group 10 NASCAR - Zac Grinstead
Am Group 10 NASCAR - Zac Grinstead
Expert 4.5 NASCAR - Duran Trujillo
Expert Group 10 NASCAR - Duran Trujillo
Am 4.5 NASCAR - Bill Vanderziel
The President of the USRA, Chris Radisich, is considering sanctioning a "Division 3" which will be for vintage-type or retro slot racing cars. The rules and Division 3 series are at this moment still evolving, but the purpose is to create a class where the cars raced are easily recognized and to shift away from expensive high tech componentry.
The 25th World Slot Car Championship (aka "The Worlds") was held May 17–21, 2006 in Rio De Janeiro, Brazil at Top Slot Raceways. It was sanctioned by the NPRA which is a South American slot racing federation.
2006 Worlds Champions:
Group 7 (open) - Joao Carlos Geraldo
External links
- http://www.isra-brazil.com.br/results_2011.html ISRA results and other info.
- Slot Car Illustrated - Largest Forum for US Racers 1/32 and 1/24, News and Reviews
- Slot Forum International - very popular English language forum
- Racefun Club - Danish slot racing club fora and result page
- X-speedracing - Danish slot racing team home pag
- Rossendale Model Stock Car Club - RMSCC Home page
- International Slot Racing Association - ISRA Home page
- Slot Car Racing Directory and Search Engine
- Slot Forum in spanish A Spanish slot forum
- The origins of slot car racing
- A history of commercial slot racing
- Track Hobbies - F1 HO Slot Cars - All Manufacturers
- Auslot Forums- Australian Slot Car Discussion Forum
- British Slot Car Racing Association
- BW-Slot - German 1/43 site (also in English)
- E-Ticket Racing Slotcar Drag Racing Site
- Home Racing World- Reviews, How-To, Forum, great for new folks who want to learn
- HO Slot Car Racing
- Digital Slot Car Racing
- HO Slot Racing News, Blog, and Forum
- OWH Slot Car Talk and Online News
- Scale Auto Racing News - reporting since 1979
- Slotblog! One of the busiest slot car forums and home of the Retro racing movement.
- Slot Car Links- 444 up to date slot car links and websites
- SlotSide
- Raceset - Independent Slot Car Reviews
- NSCC - UK National Scalextric Collectors' Club
- United Slot Racer's Association - USRA Home Page
- Southern California USRA - Southern California Slot Car Racing Information
- Slot Racing Blog and Portal - Racing Information and News From Around the World
- Cheryco - manufacturers of Japanese Slotcar racing.
- IMCA International Model Car Association - Worldwide Slot Car Racing Organization
- WSMCR.com - Sydney 1/24 drag racing
- XSRDragRacing.com - Western Australian 1/24 drag racing
- Mid-America Raceway and Hobbies - Site of the 2009 USRA Division 2 National Championships
- Scale Racing America Governing body for 1/24 Model Car Racing in North America
- Italian Slot Portal All news and competition of slot in Italy and Europe
- The Old Weird Herald - News, forums, race reports, tech tips, info, & fun - for "grown-ups" who still play with toy cars.
Note: this article concerns slot car racing competition. For information on the general slot car hobby, including more detailed coverage of history, scales, track-types and mechanical functioning, see slot car
Slot car
A slot car is a powered miniature auto or other vehicle that is guided by a groove or slot in the track on which it runs. A pin or blade extends from the bottom of the car into the slot...
.
Hobby
A hobby is a regular activity or interest that is undertaken for pleasure, typically done during one's leisure time.- Etymology :A hobby horse is a wooden or wickerwork toy made to be ridden just like a real horse...
of racing
Racing
A sport race is a competition of speed, against an objective criterion, usually a clock or to a specific point. The competitors in a race try to complete a given task in the shortest amount of time...
with powered miniature autos (or other vehicles) which are guided by grooves or slots in the track on which they run.
Slot car
Slot car
A slot car is a powered miniature auto or other vehicle that is guided by a groove or slot in the track on which it runs. A pin or blade extends from the bottom of the car into the slot...
s are usually models of actual automobiles, though some have bodies purpose-designed for miniature racing. Most enthusiasts use commercially-available slot cars (often modified for better performance), others motorize static models, and some "scratch-build," creating their own mechanisms and bodies from basic parts and materials.
Slot car racing ranges from casual get-togethers at home tracks, using whatever cars the host makes available, to very serious competitions in which contestants painstakingly build or modify their own cars for maximum performance and compete in a series of races culminating in a national championship. Some hobbyists, much as in model railroading, build elaborate tracks, sculpted to have the appearance of a real-life racecourse, including miniature buildings, trees and people, while the more serious competitive racers often prefer a track unobstructed by scenery.
Slot car racing was a popular fad in the 1960s, with sales reaching $500 million annually, including 3,000 public courses in the United States alone. The fad sputtered out by the start of the 1970s as amateurs felt squeezed out at races and stayed home.
Common slot car scales
There are three common slotcar scales
Scale (ratio)
The scale ratio of some sort of model which represents an original proportionally is the ratio of a linear dimension of the model to the same dimension of the original. Examples include a 3-dimensional scale model of a building or the scale drawings of the elevations or plans of a building. In such...
used for competition:
- 1:24 scale1:24 scale1:24 is a very popular size for Die-cast toy vehicles, which are collected by children and adults. Primarily automobiles are made in this scale, with a few examples of tractor trailers and other larger equipment. Plastic automobile kits are frequently made in this scale.1:24 is the largest of the...
or 1/24, cars are the largest slot cars commonly raced. A typical 1:24 car might be 7 to 8 inches long (18–20 cm). 1:24 cars require a course so relatively large as to be impractical for many home enthusiasts, so most serious 1:24 racing is done at commercial or club tracks. - 1:32 scale1:32 scale1:32 scale is a traditional scale for models and miniatures, in which one unit on the model represents 32 units on the actual object. It is also known as "three-eighths scale", since 3/8-inch represents a foot...
or 1/32, cars are smaller and more suited to home-sized race courses but they are also widely raced on commercial tracks, in hobby shops or in clubs. A 1:32 car averages 5 to 6 inches (13–15 cm). - HO scaleHO scaleHO or H0 is the most popular scale of model railway in the world.According to the NMRA standard S-1.2 predominantly used in North America, in HO scale, represents 1 real foot ; this ratio works out to about 1:87.1. According to the MOROP standard NEM 010 predominantly used in Europe, the scale is...
, a generalized size, originally 1:76OO gaugeOO gauge or OO scale model railways are the most popular standard-gauge model railway tracks in the U.K. This track gauge is one of several 4mm-scale standards used, but it is the only one to be served by the major manufacturers...
-1:87, now usually closer to 1:64 scale1:64 scale1:64 scale is a traditional scale for models and miniatures, in which one unit on the model represents 64 units on the actual object. It is also known as "three-sixteenths scale", since 3/16-inch represents a foot. A man is approximately 1-1/8 inches tall in 1:64 scale...
. Cars vary in size, running from 1:87 (generally the older cars) to 1:64 in scale; but they all run on track of approximately the same width, and are generically referred to as HO slot cars. A typical car is from 2.5 to 3.5 inches (5.5–8 cm). Though there is HO racing on commercial and shop-tracks, probably most HO racing occurs on home racetracks.
In addition to the major scales, 1:43 in 2006 slot car sets are generally marketed as children's toys. So far, there is little organized competition in 1:43, but the scale is gaining some acceptance among adult hobbyists for its affordability and moderate space requirements. An average car would be 4.3" (10.9 cm).
Slot car tracks for competition
Many home racetracks are made from the injection molded-plastic snap together track sections found in race sets; these courses are known as "Plastic Tracks".Shop and club tracks used for competition (especially in 1:32 and 1:24 scales) are usually hand built "Routed Tracks" in which the guide slots for the entire racecourse are routed into one or a few large pieces of sheet material (such as chipboard
Particle board
Particle board, or particleboard , is an engineered wood product manufactured from wood particles, such as wood chips, sawmill shavings, or even saw dust, and a synthetic resin or other suitable binder, which is pressed and extruded...
or Medium-density fibreboard
Medium-density fibreboard
Medium-density fiberboard is an engineered wood product formed by breaking down hardwood or softwood residuals into wood fibres, often in a defibrator, combining it with wax and a resin binder, and forming panels by applying high temperature and pressure...
) providing a smooth and consistent surface.
Competition tracks are usually laid out as road courses with many turns, though ovals and "tank tread" (trapezoidal) ovals are also fairly common. On a road course or oval, each car and each lane is generally marked with "lane tape" of a distinguishing color, allowing the corner marshals (officials) to return cars that have spun off the track to the proper lane.
Generally, tracks for formal competition may have banked corners and may bridge one section over another, but may not otherwise use "trick" configurations. Home tracks often include special features to increase the drama and/or challenge of racing, such as slots that wiggle or squeeze the lanes together, bumps, airborne jumps, or uneven surfaces, but these are typically called "toy" tracks and are not used for competition.
A different segment of the hobby is slot car drag racing
Drag racing
Drag racing is a competition in which specially prepared automobiles or motorcycles compete two at a time to be the first to cross a set finish line, from a standing start, in a straight line, over a measured distance, most commonly a ¼-mile straight track....
on a long straight strip of track. In HO size, these dragstrips are often a scale quarter-mile.
1:24 Scale tracks used for competition are generally 6-8 lane routed tracks with either wooden or flexible plastic retaining walls. The tracks are usually located in commercial or purpose-built racing centres. Most of the tracks used in the USRA regional and national events are either original American Raceways (AMF) commercial tracks or variations of these designs made from original blueprints. Tracks used in other countries, including those used for the ISRA World Championships are often more recent designs. Generally tracks used for regional or national competition have an epoxy or polymer painted surface with recessed braided electrical contacts. In USRA Division 1, the use of traction-enhancing compounds on the racing surface ("glue" or "goop") may be applied to the racing surface by the competitors.
One type of 1:24 commercial track is the "Blue King" (155 foot lap length) which is the track that is recognized for world records in 1:24 racing. The 2007 world record qualifying lap is held by Paul Pedersen at 1.404 seconds, which computes to 75.2 mph. The "King" track segments are "named" starting from the main straight in an anti-clock wise direction: bank, chute, deadman (corner), finger, back straight, 90 (corner), donut (corner), lead-on, and top-turn. Generally the "King" tracks are used for wing-car racing, where un-banked "flat" tracks of various designs are used for scale racing. An example of a championship "flat" track is the Gary Gerding designed track installed in July 2007 at Mid-America Raceway and Hobbies near Aurora, IL (the site of the 2009 USRA Division 2 National Championships)and the 2010 ISRA world championships.
Another example of a 1:24 scale track is called the "Engleman Grandstand". It is 220 foot in lap length and eight lanes wide. It is a favorite for fast cars with it's long straights and high deep bank. One can be found still in operation in Rock Hill, South Carolina at The Slot Car Cave.
1:32 Scale competition is generally run on the same routed tracks as 1:24, at least in the USA.
HO Scale competition tracks are typically between 60 and 100 ft in length and 4 to 6 lanes wide. Plastic tracks, often modified for improved performance, are more common in HO competition than in the larger scales, as is the use of large home courses for formal racing.
'Dirty' tracks - these tracks are mainly used for rally and raid.
Electrical (power) standards for competition
1:24 racing is usually at 14 volts for qualifying and 12 volts under racing conditions. 1:32 racing is between 12 and 16 volts depending on type of car. Most HO rules require tracks to provide voltage between 18.5 and 19.0 volts, and at least 5 amperes per lane. Certain European 1/24 "scale" racing events use 18.2 to 19.0 volts DC.Many tracks use banks of lead-acid batteries to produce sufficient high amp DC power, but in recent years, relatively inexpensive high-quality electronically-regulated power supplies have become more popular to achieve consistent and clean power.
Competition formats
Several race formats are employed in competition as time allows. The quickest to run is called round robin, which can be run in either of two ways. The first (and least common) way is begin with one driver on one lane of the track, a segment usually consisting of 2 minutes is run in which the driver attempts to complete as many laps as he can.The second (and most common) way to run a round robin is to have four drivers (or as many as there are lanes) start at a time, and rotate through all the lanes, before being replaced by the next set of drivers. This is known as a "heat" or "consi". Often a small amount of practice time (usually 30 seconds) will be given to the drivers prior to the start of each heat. If there are an odd number of drivers such that they are not wholly divisible into the number of lanes, one of two measures is taken: either a heat is run with one or more positions unfilled, or a heat is run with extra drivers, with a "sit-out" position. After all drivers have run their heat, placement is determined by total laps completed.
Often round robins are modified to include a "main" and sometimes also a "last-chance" heat. When run with a main, the round robin is run as normal, but at the end the top competitors (as many as there are lanes) run an extra heat. This heat is usually longer (3 to 5 minutes per segment, 1.5 "pit" time, and 1 minute practice before the heat). At the end the drivers are re-placed based on the new lap totals.
Last-chance heats are similar to mains. The top competitors (number of lanes minus one) from the round robin move into the main, and the runners-up (as many as there are lanes) are moved into the last chance heat. The last chance heat is run before the main, and is usually run with the same time parameters as the other heats. At the end, the top competitors from the last-chance are re-placed based on their new lap totals (though never lower than a comptetitor that didn't make the last-chance), and the winner of the heat moves into the final position in the main.
Bracketed formats are usually reserved for national events, and include qualifying, elimination consis, semifinals, and a main.
When the segment time has elapsed, a small amount of time, usually one minute, is given for the driver to switch lanes, perform any necessary maintenance to his car, and return his car to its resting position (albeit in a different lane). At the same time, the next driver in the succession moves into the first lane, placing his car at the starting position. When a driver completes all the lanes, his total laps and final position are recorded. This continues until all drivers have completed all lanes. Lap totals are compared to determine placement.
Most racing organisations allow a "track call" (where the power is turned off) for a situation where a race car is in the wrong lane. This is also referred to as a "rider" and is considered to be a dangerous and unfair situation. Track calls are also sometimes used in the event that a car flies off the table and cannot be located by a marshal.
Slot racing organizations
1:24 scale racing organizationsThere are many different local, regional, national, and international organizations for 1:24 scale slot cars. 1:24 scale is primarily raced at commercial slot car raceways. The largest USA organisation, holding 2 Divisional USA National Championship events every year, is the USRA: United Slot Racers Association. The International Slot Racing Association (ISRA) sanctions a World Slot Car Racing Championship in a different country every year.
National Slot Car Scale Racing Association known as NSCSRA. NSCSRA formed in 1989 for the purpose of promoting "Fair and Equal Racing for all" who enjoyed slot cars as a hobby. The rules were established in 1989 to insure the fair and equal racing concept for all participants. Up to four times a year NSCSRA holds a Championship for various classes including Vintage Scale Racing, Flexi and Unlimited Racing. The Famous "Top Gunner" Championship recently crowned a two Champion Jim "Mr. B" Bronson. Bronson joins Top Gunner Champions Bryan "Captain Snoozy" Proctor (3 times, 1 time NON PRO, 2 PRO), Casey Kennedy (6 times PRO), Kaitlyn White (2 Times NON PRO) as mulitple times Champion. The most recent Championship held in early 2009 crowned Bronson as Pro and Don Sims as Non Pro Champions at Tuff Traxx Hobbies and Slot Car Raceway In Mesa, Arizona.
1:32 scale racing organizations
The International Slot Racing Association (ISRA) sanctions a World Slot Car Racing Championship in a different country every year.
In 2004, the True Scale Racing Federation (TSRF) was established by former pro 1:24 racer Phillipe de Lespinay (aka: PdL) with the goal being to establish a North American "true scale" 1:24 and 1:32 North American racing series. The TSRF concept is very similar to full-scale "spec" racing where only TSRF approved equipment can be used for competition. Many other countries have national organisations, for example the The British Slot Car Racing Association (BSCRA) have been running national championships since 1964.
HO Organizations
There are two large HO racing organizations in the US: HOPRA (the HO Professional Racing Association) and UFHORA (the United Federation of HO Racers Association). Each hosts a national competition annually, usually in July. There are many state-wide organizations running under HOPRA and/or UFHORA rule sets.
"The Fray In Ferndale", California
Ferndale, California
Ferndale is a city in Humboldt County, California, United States. Known for its well-preserved Victorian buildings, the city's population was 1,371 at the 2010 census, down from 1,382 at the 2000 census...
boasts the largest turnout of any slot car race in the world. The highly competitive race is held yearly, in February, and more than 100 individuals, and 16 teams, show up to race on 8 tables. This is the race that determines the direction that the hobby takes, regarding the venerable Aurora Thunderjet. The race has been held since 1997.
Unlike 1:24 scale tracks, HO race tracks can be small enough to fit in common basements. Therefore, most state organizations run some, if not most, of their series on home tracks as opposed to hobby shop tracks. Additionally, home tracks are often used for national competition.
HO Scale Oval racing is very popular in the Northeastern USA. The cars are molded to look like Dirt Modifieds and Sprint Cars. The Sprint Cars and Dirt Modified cars are raced on oval tracks anywhere from 8 lanes to 4 lanes.
1:24 racing classes
Most 1:24 racing series use some variation of the USRA Division 1 or Division 2 rules. The USRA rules have their roots in the NCC rules of 1971 which were written with the goal of making a number of under-classes in slot racing to allow more diversity in competition.
USRA division 1
- a) Spec-15: Amateur only
- b) GP-12: Amateur and Expert
- c) International 15 (15A): Amateur and Expert
- d) Cobalt 12/15: Amateur and Expert
- e) Group 27: Amateur and Expert
- f) Group 7 (open): Semi-Pro and Pro
There is also a class in its genesis called "One Motor Only" that is similar to Group 7 with the difference being that motor changes after tech are not allowed.
USRA division 2
- a) Group 10 Stock Car
- b) JRL
- c) GTP
- d) GT-1
- e) GT-12
- f) C-12e
- g) 1/32 F-1 Eurosport
- h) 1/32 Eurosport
- i) 1/24 Eurosport
USRA division 3: (proposed)
- a) Nostalgia Can-Am
- b) Vintage NASCAR
- c) Nostalgia F1
- d) TSR
- e) Vintage "Thingie"
Note: in spite of the USRA not yet recognizing "Division 3", independent sanctioning bodies on the east and west coast have been organizing and hosting Nostalgia Can-Am and Nostalgia F1 races. Interest has been growing in a "spec" Can Am class which is expected to begin having major events in 2009.
Formula-2000
F-2000 is raced primarily in the midwest; it is a variation of the USRA Division 1 rules with the prime exception being traction/braking "glue" is not allowed to be applied to the racing surface by participants. Motor changes once the race has started are not allowed, and there are other rules restrictions intended to reduce the cost of participation.
Other international organisations such as the IMCA and ISRA have their own classifications and technical regulations. Contact the organisation directly for their latest rules and series schedule.
1:32 Racing Classes
Many types of races exist for 1:32 Racing Classes.
- Speed
- Rally - world rally cars, production, super 1600, ...
- Raid - T1, T2, T3, T4, T5
To note that in rally and raid races it is frequent to include 'dirty' races, e.g. snow or dirt.
HO Racing ClassesHOPRA and UFHORA run similar classes and similar rules for those classes. The following are brief explanations of some of those classes. General rules specify the size of the car and anything else that pertains to all classes.
- Superstock (HOPRA and UFHORA): Cars may have at most four magnets (two to drive the motor and two "traction" magnets for additional downforce). All magnets must be ceramic. Motors must be stock, and may be balanced and/or trued (referred to as "hot-stock").
- Modified (HOPRA): Also known as "ceramic modified" is the same as superstock above, but the motor is unrestricted and the chassis may be sanded.
- Modified (UFHORA): Cars may have at most four magnets (2 to drive the motor and 2 "traction" magnets for additional downforce). Motor magnets must be ceramic, traction magnets may be polymer. Motor must have a resistance of no less than 3.0 Ω on each pole.
- Polymer Modified (HOPRA)/Restricted Open (UFHORA): Cars may have at most four magnets (two to drive the motor and two "traction" magnets for additional downforce). All magnets may be polymer. Motor is unrestricted. Chassis may be sanded. Shunt wires may be used.
- Unlimited (UFHORA and HOPRA): No restrictions. Custom chassis permitted. Six neodymium magnets are usually employed.
Current standings
ISRA 2010 World Driver Rankings A.K.A.| Ranked | Driver | Country |
|---|---|---|
| 1 | Vladimir Horky | CZE |
| 2 | Antonin Vojtik | CZE |
| 3 | Piero Castricone | ITA |
| 4 | Petr Krcil | CZE |
| 5 | Matti Fyhr | FIN |
| 6 | Brian Saunders | GBR |
| 7 | Paul Gawronski | USA |
| 8 | Raivis Jansons | LAT |
| 9 | jiri Karlik | CZE |
| 10 | Paolo Trigilio | ITA |
| 11 | Greg Gilbert | USA |
| 12 | James Cleave | GBR |
| 13 | Micheal Landrud | SWE |
| 14 | Miroslav Vadlejch | CZE |
| 15 | Janis Rage-Ragis | LAT |
ISRA
The 2011 championships at redfox raceway was held on the 1st-8th October, in an historic moment that is sure to not be repeated for a long time Paulo Trigillo of Italy won all 4 classes allbeit one was with Swedens Michael Landrud. The 2012 competition will be held in Sweden.
USRA
The 2010 Division 1 (Wing) Nationals (or "Nats") were held at The Track in Dallas, Texas at Dallas slot cars July 30- August 8.
2010 Wing Car USA Nats Champions:
Semi-Pro Group 7: Petr Krcil
Pro Group 7: Richard Cunutte
Theseare the only winners I could find off the site, sorry
The 2006 Division 2 (Scale) Nationals were held at Slot Car Raceway in Rohnert Park, CA starting on April 18 and concluding on April 23.
2006 Scale Nats Champions:
1:32 Eurosport - Paul Gawronski
AM GT-12 - Zac Grinstead
Expert GT-12 - Herman James
C-12 Eurosport - Paul Gawronski
Am GTP - Chris Rodriguez, Jr.
Expert GTP - Duran Trujillo
Am GT1 - Ron Southern
Expert GT1 - Paul Gawronski
Jr Group 10 NASCAR - Zac Grinstead
Am Group 10 NASCAR - Zac Grinstead
Expert 4.5 NASCAR - Duran Trujillo
Expert Group 10 NASCAR - Duran Trujillo
Am 4.5 NASCAR - Bill Vanderziel
The President of the USRA, Chris Radisich, is considering sanctioning a "Division 3" which will be for vintage-type or retro slot racing cars. The rules and Division 3 series are at this moment still evolving, but the purpose is to create a class where the cars raced are easily recognized and to shift away from expensive high tech componentry.
The 25th World Slot Car Championship (aka "The Worlds") was held May 17–21, 2006 in Rio De Janeiro, Brazil at Top Slot Raceways. It was sanctioned by the NPRA which is a South American slot racing federation.
2006 Worlds Champions:
Group 7 (open) - Joao Carlos Geraldo
External links
- http://www.isra-brazil.com.br/results_2011.html ISRA results and other info.
- Slot Car Illustrated - Largest Forum for US Racers 1/32 and 1/24, News and Reviews
- Slot Forum International - very popular English language forum
- Racefun Club - Danish slot racing club fora and result page
- X-speedracing - Danish slot racing team home pag
- Rossendale Model Stock Car Club - RMSCC Home page
- International Slot Racing Association - ISRA Home page
- Slot Car Racing Directory and Search Engine
- Slot Forum in spanish A Spanish slot forum
- The origins of slot car racing
- A history of commercial slot racing
- Track Hobbies - F1 HO Slot Cars - All Manufacturers
- Auslot Forums- Australian Slot Car Discussion Forum
- British Slot Car Racing Association
- BW-Slot - German 1/43 site (also in English)
- E-Ticket Racing Slotcar Drag Racing Site
- Home Racing World- Reviews, How-To, Forum, great for new folks who want to learn
- HO Slot Car Racing
- Digital Slot Car Racing
- HO Slot Racing News, Blog, and Forum
- OWH Slot Car Talk and Online News
- Scale Auto Racing News - reporting since 1979
- Slotblog! One of the busiest slot car forums and home of the Retro racing movement.
- Slot Car Links- 444 up to date slot car links and websites
- SlotSide
- Raceset - Independent Slot Car Reviews
- NSCC - UK National Scalextric Collectors' Club
- United Slot Racer's Association - USRA Home Page
- Southern California USRA - Southern California Slot Car Racing Information
- Slot Racing Blog and Portal - Racing Information and News From Around the World
- Cheryco - manufacturers of Japanese Slotcar racing.
- IMCA International Model Car Association - Worldwide Slot Car Racing Organization
- WSMCR.com - Sydney 1/24 drag racing
- XSRDragRacing.com - Western Australian 1/24 drag racing
- Mid-America Raceway and Hobbies - Site of the 2009 USRA Division 2 National Championships
- Scale Racing America Governing body for 1/24 Model Car Racing in North America
- Italian Slot Portal All news and competition of slot in Italy and Europe
- The Old Weird Herald - News, forums, race reports, tech tips, info, & fun - for "grown-ups" who still play with toy cars.