Pre-preg
Encyclopedia
Pre-preg is a term for "pre-impregnated" composite fibres. These usually take the form of a weave
Weave
Weave may refer to:*Hair weave*Mozilla Weave*Weaving...

 or are uni-directional. They already contain an amount of the matrix material used to bond them together and to other components during manufacture. The pre-preg are mostly stored in cooled areas since activation is most commonly done by heat. Hence, composite structures built of pre-pregs will mostly require an oven or autoclave
Autoclave
An autoclave is an instrument used to sterilize equipment and supplies by subjecting them to high pressure saturated steam at 121 °C for around 15–20 minutes depending on the size of the load and the contents. It was invented by Charles Chamberland in 1879, although a precursor known as the...

 to cure out.

There are several advantages and disadvantages of the pre-preg process in comparison to the hot injection process. Pre-preg allows one to impregnate the fibers on a flat workable surface, or rather in an industrial process, and then later form the impregnated fibers to a shape which could prove to be problematic for the hot injection process. Prepreg also allows one to impregnate a bulk amount of fiber and then store it in a cooled area for an extended period of time to cure later. Pre-preg on the other hand can be time consuming in comparison to the hot injection process.

Material advances

Recent advances in Out-of-Autoclave (OOA) processes hold promise for improving performance and lowering costs for composite structures. Using vacuum-bag-only (VBO) for atmospheric pressures, the new OOA processes promise to deliver the less than 1 percent void content required for aerospace primary structures. Led by material scientists at Air Force Research Lab, the technique would save the costs of constructing and installing large structure autoclaves ($100M saved at NASA) and making small production runs of 100 aircraft economically viable.
The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK