Package on package
Encyclopedia
Package on package is an integrated circuit packaging
method to combine vertically discrete logic and memory ball grid array
(BGA) packages. Two or more packages are installed atop each other, i.e. stacked, with a standard interface to route signals between them. This allows higher component density in devices, such as mobile phone
s, personal digital assistant
s (PDA), and digital camera
s.
The main financial benefit of package on package is that the memory device is decoupled from the logic device. Thus:
Electrically, PoP offers benefits by minimizing track length between different interoperating parts, such as a controller and a memory. This yields better electrical performance of devices, since shorter routing of interconnections between circuits yields faster signal propagation and reduced noise and cross-talk.
Integrated circuit packaging
Integrated circuit packaging is the final stage of semiconductor device fabrication per se, followed by IC testing.Packaging in ceramic or plastic prevents physical damage and corrosion and supports the electrical contacts required to assemble the integrated circuit into a system.In the integrated...
method to combine vertically discrete logic and memory ball grid array
Ball grid array
A ball grid array is a type of surface-mount packaging used for integrated circuits.- Description :The BGA is descended from the pin grid array , which is a package with one face covered with pins in a grid pattern. These pins conduct electrical signals from the integrated circuit to the printed...
(BGA) packages. Two or more packages are installed atop each other, i.e. stacked, with a standard interface to route signals between them. This allows higher component density in devices, such as mobile phone
Mobile phone
A mobile phone is a device which can make and receive telephone calls over a radio link whilst moving around a wide geographic area. It does so by connecting to a cellular network provided by a mobile network operator...
s, personal digital assistant
Personal digital assistant
A personal digital assistant , also known as a palmtop computer, or personal data assistant, is a mobile device that functions as a personal information manager. Current PDAs often have the ability to connect to the Internet...
s (PDA), and digital camera
Digital camera
A digital camera is a camera that takes video or still photographs, or both, digitally by recording images via an electronic image sensor. It is the main device used in the field of digital photography...
s.
Typical configurations
Two widely used configurations exist for PoP:- Pure memory stacking — two or more memory only packages are stacked on each other
- Mixed logic-memory stacking — logic (CPU) package on the bottom, memory package on top. For example, the bottom could be an application processor for a mobile phoneMobile phoneA mobile phone is a device which can make and receive telephone calls over a radio link whilst moving around a wide geographic area. It does so by connecting to a cellular network provided by a mobile network operator...
. The logic package is on the bottom because it needs many more BGA connections to the motherboard.
Benefits
The most obvious benefit is motherboard space savings. PoP shares this trait with stacked-die packages. However there are several key differences between stacked-die and stacked-package products.The main financial benefit of package on package is that the memory device is decoupled from the logic device. Thus:
- The memory package can be tested separately from the logic package
- Only "known good" packages are used in final assembly (if the memory is bad only the memory is thrown away and so on). Compare this to stacked-die packages where the entire set is useless and rejected if either the memory or logic is bad.
- The end user (such as makers of mobile phoneMobile phoneA mobile phone is a device which can make and receive telephone calls over a radio link whilst moving around a wide geographic area. It does so by connecting to a cellular network provided by a mobile network operator...
s or digital cameraDigital cameraA digital camera is a camera that takes video or still photographs, or both, digitally by recording images via an electronic image sensor. It is the main device used in the field of digital photography...
s) controls the logistics. This means memory from different suppliers can be used at different times without changing the logic. The memory becomes a commodity to be sourced from the lowest cost supplier. This trait is also a benefit compared to PiP (package in package) which requires a specific memory device to be designed in and sourced upstream of the end user. - Because the construction is like LegoLegoLego is a line of construction toys manufactured by the Lego Group, a privately held company based in Billund, Denmark. The company's flagship product, Lego, consists of colorful interlocking plastic bricks and an accompanying array of gears, minifigures and various other parts...
, any mechanically mating top package can be used. For a low-end phone, a smaller memory configuration may be used on the top package. For a high-end phone, more memory could be used with the same bottom package. This simplifies inventory control by the OEM. For a stacked-die package or even PiP (package in package), the exact memory configuration must be known weeks or months in advance. - Because the memory only comes into the mix at final assembly, there is no reason for logic suppliers to source any memory. With a stacked-die device, the logic provider must buy wafers of memory from a memory supplier.
Electrically, PoP offers benefits by minimizing track length between different interoperating parts, such as a controller and a memory. This yields better electrical performance of devices, since shorter routing of interconnections between circuits yields faster signal propagation and reduced noise and cross-talk.
JEDEC standardization
- JEDECJEDECThe JEDEC Solid State Technology Association, formerly known as the Joint Electron Devices Engineering Council , is an independent semiconductor engineering trade organization and standardization body...
JC-11 committee deals with package outline drawing standards related to the bottom PoP package. See documents MO-266A and JEDEC publication 95, Design Guide 4.22. - JEDEC JC-63 committee deals with top (memory) PoP package pinout standardization. See JEDEC Standard No. 21-C, Page 3.12.2 – 1
Other names
Package on package is also known by other names:- PoP — refers to the combined top and bottom packages
- PoPt — refers to the top package
- PoPb — refers to the bottom package
- PSvfBGA — refers to the bottom package: Package Stackable Very thin Fine pitch BGA
- PSfcCSP — refers to the bottom package: Package Stackable Flip Chip Chip Scale Package
External links
- push Package on Package into new markets, Flynn Carson, Semiconductor International, April 2010
- Practical Components PoP Samples and Test Boards (daisy chains)
- Package-on-Package: The Story Behind This Industry Hit (Semiconductor International, 6/1/2007)
- Package-on-package is killer app for handsets (EETimes Article July 2008)
- "POP" Goes the Future (Assembly Magazine, 9/30/2008)
- Package on Package: Top and Bottom PoP Technologies
- PoP Solder Balling (Circuits Assembly Magazine, December 2010)
- The BeagleBoard uses a PoP processor
- Killer app for cell handsets EETimes 10/20/2008
- TMV: An ‘Enabling’ Technology for Next-Gen PoP Requirements Semicon International 11/04/2008
- Rolling with Solder Balls (Circuits Assembly Magazine, October 2010)
- Don't Drown the Part! (Circuits Assembly Magazine, August 2010)
- POP (Package On Package): An Ems Perspective On Assembly, Rework And Reliability 02/12/2009
- Hamid Eslampour et al.Comparison of Advanced PoP Package Configurations, 2010 Electronic Components and Technology Conference (ECTC) Proceedings