Model based design - AbsoluteAstronomy.com

Model-Based Design is a mathematical and visual method of addressing problems associated with designing complex control, signal processing and communication systems. It is used in many motion control, industrial equipment, aerospace, and automotive applications. Model-based design is a methodology applied in designing embedded software.

MBD provides an efficient approach for establishing a common framework for communication throughout the design process while supporting the development cycle ("V" diagram). In Model-based design of control systems, development is manifested in these four steps: 1) modeling a plant

Plant (control theory)

A plant in control theory is the combination of process and actuator....

, 2) analyzing and synthesizing a controller for the plant, 3) simulating the plant and controller, and 4) integrating all these phases by deploying the controller. The model-based design paradigm is significantly different from traditional design methodology. Rather than using complex structures and extensive software code, designers can use MBD to define models with advanced functional characteristics using continuous-time and discrete-time building blocks. These built models used with simulation tools can lead to rapid prototyping, software testing, and verification. Not only is the testing and verification process enhanced, but also, in some cases, hardware-in-the-loop simulation can be used with the new design paradigm to perform testing of dynamic effects on the system more quickly and much more efficiently than with traditional design methodology.

The main steps in MBD approach are:

Plant modeling. Plant modeling can be data-driven or first principles based. Data-driven plant modeling uses techniques such as System identification
System identification
In control engineering, the field of system identification uses statistical methods to build mathematical models of dynamical systems from measured data...

. With system identification, the plant model is identified by acquiring and processing raw data from a real-world system and choosing a mathematical algorithm with which to identify a mathematical model. Various kinds of analysis and simulations can be performed using the identified model before it is used to design a model-based controller. First principles based modeling is based on creating a block diagram model that implements known differential-algebraic equations governing plant dynamics. A type of first principles based modeling is physical modeling, where a model is created by connectings blocks that represent physical elements that the actual plant consists of.
Controller
Control system
A control system is a device, or set of devices to manage, command, direct or regulate the behavior of other devices or system.There are two common classes of control systems, with many variations and combinations: logic or sequential controls, and feedback or linear controls...

analysis and synthesis. The mathematical model conceived in step 1 is used to identify dynamic characteristics of the plant model. A controller can be then be synthesized based on these characteristics.
Offline simulation
Simulation
Simulation is the imitation of some real thing available, state of affairs, or process. The act of simulating something generally entails representing certain key characteristics or behaviours of a selected physical or abstract system....

and real-time simulation
Real-time Simulation
Real-time Simulation refers to a computer model of a physical system that can execute at the same rate as actual "wall clock" time. In other words, the computer model runs at the same rate as the actual physical system...

. The time response of the dynamic system to complex, time-varying inputs is investigated. This is done by simulating a simple LTI or a non-linear model of the plant with the controller. Simulation allows specification, requirements, and modeling errors to be found immediately, rather than later in the design effort. Real-time simulation can be done by automatically generating code for the controller developed in step 3. This code can be deployed to a special real-time protoyping computer that can run the code and control the operation of the plant. If plant prototype is not available, or testing on the prototype is dangerous or expensive, code can be automatically generated from the plant model. This code can be deployed to the special real-time computer that can be connected to the target processor with running controller code. This way, controller can be tested in real-time against a real-time plant model.
Deployment. Ideally this is done via automatic code generation from the controller developed in step 3. It is unlikely that the controller will work on the actual system as well as it did in simulation, so an iterative debugging process is done by analyzing results on the actual target and updating the controller model. Model based design tools allow all these iterative steps to be performed in a unified visual environment.

Some of the notable advantages MBD offers in comparison to the traditional approach are:

MBD provides a common design environment, which facilitates general communication, data analysis, and system verification between development groups.
Engineers can locate and correct errors early in system design, when the time and financial impact of system modification are minimized.
Design reuse, for upgrades and for derivative systems with expanded capabilities, is facilitated

History

The dawn of the electrical age brought many innovative and advanced control systems. As early as the 1920s two aspects of engineering, control theory and control systems, converged to make large-scale integrated systems possible. In those early days controls systems were commonly used in the industrial environment. Large process facilities started using process controllers for regulating continuous variables such as temperature, pressure, and flow rate. Electrical relays built into ladder-like networks were one of the first discrete control devices to automate an entire manufacturing process.

Control systems gained momentum, primarily in the automotive and aerospace sectors. In the 1950s and 1960s the push to Space generated interest in embedded control systems. Engineers constructed control systems such as engine control units and flight simulators, that could be part of the end product. By the end of the twentieth century, embedded control systems were ubiquitous, as even White goods such as washing machines and air-conditions contained complex and advanced control algorithms, making them much more "intelligent".

In the year 1969, the first computer-based controllers were introduced, These early programmable logic controller

Programmable logic controller

A programmable logic controller or programmable controller is a digital computer used for automation of electromechanical processes, such as control of machinery on factory assembly lines, amusement rides, or light fixtures. PLCs are used in many industries and machines...

s (PLC), mimicked the operations of already available discrete control technologies that used the out-dated relay ladders. The advent of PC technology brought a drastic shift in the process and discrete control market. An off-the-shelf desktop loaded with adequate hardware and software can run an entire process unit, and execute complex and established PID algorithms or work as a Distributed Control System (DCS).

Challenges

Modeling and simulation tools have long been in use, but traditional text-based tools are inadequate for the complex nature of modern control systems. Because of the limitations of graphical tools, design engineers previously relied heavily on text-based programming and mathematical models. However, developing these models was difficult, time-consuming, and highly prone to error. In addition, debugging text-based programs was a tedious process, requiring much trial and error before a final fault-free model could be created, especially since mathematical models undergo unseen changes during the translation through the various design stages.

These challenges are overcome by the use of graphical modeling tools, used today in all aspects of design. These tools provide a very generic and unified graphical modeling environment, they reduce the complexity of model designs by breaking them into hierarchies of individual design blocks. Designers can thus achieve multiple levels of model fidelity by simply substituting one block element with another. Graphical models are also the best way to document engineers’ ideas. It helps engineers to conceptualize the entire system and simplifies the process of transporting the model from one stage to another in the design process. Boeing's simulator EASY5 was among the first modeling tools to be provided with a graphical user interface. This was followed by many other tools.

When developing embedded control systems, designers are squeezed by two trends —- shrinking development cycles and growing design intricacy. The divide-and-conquer strategy for developing these complex systems means coordinating the resources of people with expertise in a wide range of disciplines. The traditional, text-based approach of embedded system design is not efficient enough to handle such advanced, complex systems.

External links

The source of this article is wikipedia, the free encyclopedia. The text of this article is licensed under the GFDL.

History

Challenges

See also

External links