LCD classification
Encyclopedia
There are various classifications of the electro-optical modes of liquid crystal display
Liquid crystal display
A liquid crystal display is a flat panel display, electronic visual display, or video display that uses the light modulating properties of liquid crystals . LCs do not emit light directly....

s
(LCDs).

LCD operation in a nutshell

The operation of TN, VA and IPS-LCDs can be summarized as follows:
  • a well aligned LC configuration is deformed by an applied electric field,
  • this deformation changes the orientation of the local LC optical axis with respect to the direction of light propagation through the LC layer,
  • this change of orientation changes the polarization state of the light propagating through the LC layer,
  • this change of the polarization state is converted into a change of intensity by dichroic absorption, usually by external dichroic polarizer
    Polarizer
    A polarizer is an optical filter that passes light of a specific polarization and blocks waves of other polarizations. It can convert a beam of light of undefined or mixed polarization into a beam with well-defined polarization. The common types of polarizers are linear polarizers and circular...

    s.

Activation

Liquid crystals can be aligned by both magnetic and electric fields. The strength of the required magnetic field is too high to be feasible for display applications.

One electro-optical effect with LCs requires a current through the LC-cell; all other practiced electro-optical effects only require an electric field (without current) for alignment of the LC.
Electro-optical effects in Liquid Crystals

LCs can be aligned by electric and magnetic fields
electric field effects electro-hydrodynamic effects
the electrical field aligns the liquid crystal
no current is necessary (very low power required for operation).
current induced domain formation and scattering
requires current for activation.
twisted nematic field effect
Twisted nematic field effect
The twisted nematic effect was a main technology breakthrough that made liquid crystal displays practical. Unlike earlier displays, TN-cells did not require a current to flow for operation and used low operating voltages suitable for use with batteries...

dynamic scattering mode, DMS
Dynamic Scattering Mode
George Heilmeier proposed the dynamic scattering effect which causes a strong scattering of light when the electric field applied to a special liquid crystal mixture exceeds a threshold value.A DSM cell requires the following ingredients:...

Visual information can be generated by the processes of
  • absorption (either by dichroic dyes in the LC or by external dichroic polarizers),
  • scattering,
  • index matching (e.g. holographic PDLCs).

Absorption Effects

The state of polarization of the light traveling through the LC layer cannot be perceived by human observers, it must be converted into intensity (e.g. luminance) in order to become perceivable. This is achieved with absorption by dichroic dyes and dichroic polarizers.
no current flow is necessary (very low power required for operation).> requires current to flow for activation.>
Absorption Effects
internal absorption
(dichroic dyes dissolved in LC)
, guest-host LCDs
external dichroic polarizers
non-twisted configurations with dichroic dyes electrically controlled birefringence, ECB
twisted configurations with dichroic dyes twisted nematic field-effect , TN
supertwisted nematic effects, STN, the total twist is > 90°

SBE (supertwisted birefringence effect)

DSTN: double layer STN effect

FSTN: foil-compensated supertwisted nematic effect (foil = retarder sheet)
in-plane switching effects, IPS
fringe-field switching effect, FFS
vertically aligned effects, VA
multi-domain vertical alignment, MVA
patterned vertical alignment, PVA
PI-cell (aka OCB-cell)
OCB: optically compensated bend-mode
cholesteric-nematic phase-change with dichroic dyes

Polymer Dispersed Liquid Crystals

Liquid crystals with low molecular weight can be mixed with high molecular weight polymers, followed by phase-separation to form a kind of spongy matrix filled with LC droplets. An external electric field can align the LC to match its index with that of the polymer matrix, switching that cell from a milky (scattering) state to a clear transparent state. When dichroic dyes are dissolved in the LC an electric field can switch the PDLC from an absorbing state to a fairly transparent state.

When the amount of polymer is small compared to that of the LC there will be no separation of both components, but the polymer forms an anisotropic fiber-like network within the LC that stabilizes the state in which it has been formed. In such a way, certain physical properties (e.g. elasticities, viscosities, and thus threshold voltages and response times, respectively) can be controlled.
Polymer Dispersed Liquid Crystals
PDLCs
  • absorptive dye-doped PDLCs
  • scattering PDLCs
  • holographic PCLCs
  • polymer stabilized LCDs

  • Bistable LCDs

    For some applications bistability of electro-optical effects is highly advantageous, since the optical response (visual information) is maintained even after removal of the electrical activation, thus saving battery charge. These effects are beneficial when the displayed visual information is changed only in extended intervals (e.g. electronic paper, electronic price tags, etc.).
    Bistable LCDs
    ferroelectric LCs cholesteric LCs nematic LCs
    bistable ferroelectric LCDs bistable cholesteric phase-change LCDs bistable nematic displays
    • twisted-untwisted bistabilities
      (180°/360° twist)
    • bistable twisted nematic effects, BTN
  • zenithal bistabilities
  • azimutal bistabilities

  • Reduction of Variations with Viewing Direction in LCDs

    With the direction of light propagation in the LC layer also the state of polarization of the light changes, and, as a consequence, the intensity and the spectral distribution of transmitted light changes too. In order to reduce such unwanted variations to a minimum, two approaches are used in actual LC displays: multi-domain approaches and application of external birefringent layers (retarder sheets).
    Reduction of Variations with Viewing Direction in LCDs
    multidomain approaches (birefringent) retarder sheet compensation
    visual averaging of microscopic regions with
    different viewing-direction properties
    correction of unwanted effects in LC by external birefringent (polymeric) layers.

    Literature

    • Pochi Yeh, Claire Gu, Optics of Liquid Crystal Displays, John Wiley & Sons, 1999
    • D.K. Yang, S.T. Wu, Fundamentals of Liquid Crystal Devices, Wiley SID Series in Display Technology, 2006
    The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
     
    x
    OK