Kamacite
Encyclopedia
Kamacite is a mineral
. It is an alloy
of iron
and nickel
, usually in the proportions of 90:10 to 95:5 although impurities such as cobalt
or carbon
may be present. On the surface of Earth, it occurs naturally only in meteorite
s. It has a metallic luster, is gray and has no clear cleavage although the structure is isometric-hexoctahedral. Its density is around 8 g/cm³ and its hardness is 4 on the Mohs scale
. It is also sometimes called balkeneisen.
The name was coined in 1861 and is derived from the Greek kamask (lath or beam). It is a major constituent of iron meteorite
s (octahedrite
and hexahedrite
types). In the octahedrite
s it is found in bands interleaving with taenite
forming Widmanstätten patterns. In hexahedrite
s, fine parallel lines called Neumann line
s are often seen, which are evidence for structural deformation of adjacent kamacite plates due to shock from impacts.
At times kamacite can be found so closely intermixed with taenite
that it is difficult to distinguish them visually, forming plessite
. The largest documented kamacite crystal measured 92×54×23 cm.
See also: list of minerals
Mineral
A mineral is a naturally occurring solid chemical substance formed through biogeochemical processes, having characteristic chemical composition, highly ordered atomic structure, and specific physical properties. By comparison, a rock is an aggregate of minerals and/or mineraloids and does not...
. It is an alloy
Alloy
An alloy is a mixture or metallic solid solution composed of two or more elements. Complete solid solution alloys give single solid phase microstructure, while partial solutions give two or more phases that may or may not be homogeneous in distribution, depending on thermal history...
of iron
Iron
Iron is a chemical element with the symbol Fe and atomic number 26. It is a metal in the first transition series. It is the most common element forming the planet Earth as a whole, forming much of Earth's outer and inner core. It is the fourth most common element in the Earth's crust...
and nickel
Nickel
Nickel is a chemical element with the chemical symbol Ni and atomic number 28. It is a silvery-white lustrous metal with a slight golden tinge. Nickel belongs to the transition metals and is hard and ductile...
, usually in the proportions of 90:10 to 95:5 although impurities such as cobalt
Cobalt
Cobalt is a chemical element with symbol Co and atomic number 27. It is found naturally only in chemically combined form. The free element, produced by reductive smelting, is a hard, lustrous, silver-gray metal....
or carbon
Carbon
Carbon is the chemical element with symbol C and atomic number 6. As a member of group 14 on the periodic table, it is nonmetallic and tetravalent—making four electrons available to form covalent chemical bonds...
may be present. On the surface of Earth, it occurs naturally only in meteorite
Meteorite
A meteorite is a natural object originating in outer space that survives impact with the Earth's surface. Meteorites can be big or small. Most meteorites derive from small astronomical objects called meteoroids, but they are also sometimes produced by impacts of asteroids...
s. It has a metallic luster, is gray and has no clear cleavage although the structure is isometric-hexoctahedral. Its density is around 8 g/cm³ and its hardness is 4 on the Mohs scale
Mohs scale of mineral hardness
The Mohs scale of mineral hardness characterizes the scratch resistance of various minerals through the ability of a harder material to scratch a softer material. It was created in 1812 by the German geologist and mineralogist Friedrich Mohs and is one of several definitions of hardness in...
. It is also sometimes called balkeneisen.
The name was coined in 1861 and is derived from the Greek kamask (lath or beam). It is a major constituent of iron meteorite
Iron meteorite
Iron meteorites are meteorites that consist overwhelmingly of nickel-iron alloys. The metal taken from these meteorites is known as meteoric iron and was one of the earliest sources of usable iron available to humans.-Occurrence:...
s (octahedrite
Octahedrite
Octahedrites are a class of iron meteorites within the structural classification. They are the most common class of iron meteorites.They are composed primarily of the nickel-iron alloys: taenite - high nickel content, and kamacite - low nickel content....
and hexahedrite
Hexahedrite
Hexahedrites are a type of iron meteorite.They are composed almost exclusively of the nickel-iron alloy kamacite and are lower in nickel content than the octahedrites. The nickel concentration in hexahedrites is always below 5.8% and only rarely below 5.3%....
types). In the octahedrite
Octahedrite
Octahedrites are a class of iron meteorites within the structural classification. They are the most common class of iron meteorites.They are composed primarily of the nickel-iron alloys: taenite - high nickel content, and kamacite - low nickel content....
s it is found in bands interleaving with taenite
Taenite
Taenite is a mineral found naturally on Earth mostly in iron meteorites. It is an alloy of iron and nickel, with nickel proportions of 20% up to 65%.The name is derived from the Greek for "band". Taenite is a major constituent of iron meteorites...
forming Widmanstätten patterns. In hexahedrite
Hexahedrite
Hexahedrites are a type of iron meteorite.They are composed almost exclusively of the nickel-iron alloy kamacite and are lower in nickel content than the octahedrites. The nickel concentration in hexahedrites is always below 5.8% and only rarely below 5.3%....
s, fine parallel lines called Neumann line
Neumann line
Neumann lines, or Neumann bands, are fine patterns of parallel lines seen in cross-sections of many hexahedrite iron meteorites in the kamacite phase, although they may appear also in octahedrites provided the kamacite phase is about 30 micrometres wide. They can be seen after a polished meteorite...
s are often seen, which are evidence for structural deformation of adjacent kamacite plates due to shock from impacts.
At times kamacite can be found so closely intermixed with taenite
Taenite
Taenite is a mineral found naturally on Earth mostly in iron meteorites. It is an alloy of iron and nickel, with nickel proportions of 20% up to 65%.The name is derived from the Greek for "band". Taenite is a major constituent of iron meteorites...
that it is difficult to distinguish them visually, forming plessite
Plessite
Plessite is a meteorite texture consisting of a fine-grained mixture of the minerals kamacite and taenite found in the octahedrite iron meteorites. It occurs in gaps between the larger bands of kamacite and taenite which form Widmanstätten patterns....
. The largest documented kamacite crystal measured 92×54×23 cm.
See also: list of minerals