Johnson Motor Wheel
Encyclopedia
Johnson Motor Wheel was a kit to convert a bicycle into a motorized bicycle. It was manufactured by an American firm, Johnson Brothers Motor Company in Terre Haute, Indiana.
The initial design had problems at high speeds, so a fellow inventor from Indiana, Dick Oglesby, offered his magneto
s to the Johnsons in order to address the problem. The Johnson brothers moved to South Bend, Indiana and formed the Johnson Brothers Motor Wheel Company to manufacture the kits.
The Motor Wheel had a 2 cycle engine which produced 1HP and had two flywheel magnetos, bronze bearings and a float feed carburetor
. The complete kit came with a wheel, hub tire, shock-absorbing spring sprocket holder, wheel sprocket and chain, handlebar controls for choke, throttle and engine shutoff, three quart gas tank and gas line, and all necessary fittings to adapt the engine and rear wheel unit to any 26" bicycle.
History
The Johnson Motor Wheel was designed in 1914 by Louis Johnson. It was patented in the USA in 1919 and in the UK in 1920.The initial design had problems at high speeds, so a fellow inventor from Indiana, Dick Oglesby, offered his magneto
Magneto
A magneto is a type of electrical generator.Magneto may also refer to:* Magneto , permanent magnetic alternating current rotary generator* ignition magneto, magnetos on internal combustion engines...
s to the Johnsons in order to address the problem. The Johnson brothers moved to South Bend, Indiana and formed the Johnson Brothers Motor Wheel Company to manufacture the kits.
The Motor Wheel had a 2 cycle engine which produced 1HP and had two flywheel magnetos, bronze bearings and a float feed carburetor
Carburetor
A carburetor , carburettor, or carburetter is a device that blends air and fuel for an internal combustion engine. It is sometimes shortened to carb in North America and the United Kingdom....
. The complete kit came with a wheel, hub tire, shock-absorbing spring sprocket holder, wheel sprocket and chain, handlebar controls for choke, throttle and engine shutoff, three quart gas tank and gas line, and all necessary fittings to adapt the engine and rear wheel unit to any 26" bicycle.