Inherent safety
Encyclopedia
Inherent safety is a concept particularly used in the chemical and process industries. An inherently safe process has a low level of danger even if things go wrong. It is used in contrast to safe systems where a high degree of hazard is controlled by protective systems. It should not be confused with intrinsic safety
which is a particular technology for electrical systems in potentially flammable atmospheres. As perfect safety cannot be achieved, common practice is to talk about inherently safer design.
“An inherently safer design is one that avoids hazards instead of controlling them,
particularly by reducing the amount of hazardous material and the number of
hazardous operations in the plant.”
in an article entitled “What You Don’t Have, Can’t Leak” on lessons from the Flixborough Disaster
, and the name ‘inherent safety’ from a book which was an expanded version of the article. A greatly revised and retitled 1991 version gave the techniques which are generally quoted.
The problem was solved by the design of a small, continuous-flow, well-mixed reactor with residence time reduced from 2 hours to 2 minutes.
The advantages of continuous process over a batch process is:
2 further principles are used by some:
In terms of making plants more user-friendly Kletz also added the following:
and the UK Health and Safety Executive
(HSE). In assessing COMAH sites the HSE states “Major accident hazards should be avoided or reduced at source through the application of principles of inherent safety”. The European Commission
in its Guidance Document on the Seveso II Directive states “Hazards should be possibly avoided or reduced at source through the application of inherently safe practices.”
In the USA, Contra Costa County requires chemical plants and petroleum refineries to implement inherent safety reviews and make changes based on these reviews.
Intrinsic safety
Intrinsic safety is a protection technique for safe operation of electronic equipment in explosive atmospheres and under irregular operating conditions. The concept was developed for safe operation of process control instrumentation in hazardous areas, particularly North Sea gas platforms...
which is a particular technology for electrical systems in potentially flammable atmospheres. As perfect safety cannot be achieved, common practice is to talk about inherently safer design.
“An inherently safer design is one that avoids hazards instead of controlling them,
particularly by reducing the amount of hazardous material and the number of
hazardous operations in the plant.”
Origins
The concept of reducing rather than controlling hazards comes from Trevor KletzTrevor Kletz
Trevor Kletz OBE is a prolific British author on the topic of chemical engineering safety. He is credited with introducing the concept of inherent safety, and was a major promoter of Hazop.-Early life and education:...
in an article entitled “What You Don’t Have, Can’t Leak” on lessons from the Flixborough Disaster
Flixborough disaster
The Flixborough disaster was an explosion at a chemical plant close to the village of Flixborough, England, on 1 June 1974. It killed 28 people and seriously injured 36.-Background:...
, and the name ‘inherent safety’ from a book which was an expanded version of the article. A greatly revised and retitled 1991 version gave the techniques which are generally quoted.
Principles
The terminology of inherent safety has developed since 1991, with some slightly different words but the same intentions as Kletz. The 4 main methods for achieving inherently safer design are:- Minimize: Reducing the amount of hazardous material present at any one time. Example: The old batch process for the manufacture of nitro-glycerin, The reaction was carried out using 1 tonne of material, the reason is because the time scale was long 92 hours). however the chemical reaction is not slow, but the mixing process in the batch reactor was not good.
The problem was solved by the design of a small, continuous-flow, well-mixed reactor with residence time reduced from 2 hours to 2 minutes.
The advantages of continuous process over a batch process is:
- Heat evolution is uniform therefore easier to control
- Batch processes change with time and affected by mixing quality.
- Substitute: Replacing one material with another of less hazard, e.g. cleaning with water and detergent rather than a flammable solvent
- Moderate: Reducing the strength of an effect, e.g. having a cold liquid instead of a gas at high pressure, or using material in a dilute rather than concentrated form
- Simplify: Designing out problems rather than adding additional equipment or features to deal with them. Only fitting options and using complex procedures if they are really necessary.
2 further principles are used by some:
- Error Tolerance: Equipment and processes can be designed to be capable of withstanding possible faults or deviations from design. A very simple example is making piping and joints capable of withstanding the maximum possible pressure if outlets are closed.
- Limit Effects: Designing and locating equipment so that the worst possible condition gives less danger, e.g. gravity will take a leak to a safe place, the use of bundsBundingBunding, also called a bund wall, is the area within a structure designed to prevent inundation or breaches of various types.-Liquid containment:...
.
In terms of making plants more user-friendly Kletz also added the following:
- Avoiding Knock-on Effects;
- Making Incorrect Assembly Impossible;
- Making Status Clear;
- Ease of Control;
- Software and management procedures.
Official Status
Inherent safety has been recognised as a desirable principle by a number of national authorities, including the US Nuclear Regulatory CommissionNuclear Regulatory Commission
The Nuclear Regulatory Commission is an independent agency of the United States government that was established by the Energy Reorganization Act of 1974 from the United States Atomic Energy Commission, and was first opened January 19, 1975...
and the UK Health and Safety Executive
Health and Safety Executive
The Health and Safety Executive is a non-departmental public body in the United Kingdom. It is the body responsible for the encouragement, regulation and enforcement of workplace health, safety and welfare, and for research into occupational risks in England and Wales and Scotland...
(HSE). In assessing COMAH sites the HSE states “Major accident hazards should be avoided or reduced at source through the application of principles of inherent safety”. The European Commission
European Commission
The European Commission is the executive body of the European Union. The body is responsible for proposing legislation, implementing decisions, upholding the Union's treaties and the general day-to-day running of the Union....
in its Guidance Document on the Seveso II Directive states “Hazards should be possibly avoided or reduced at source through the application of inherently safe practices.”
In the USA, Contra Costa County requires chemical plants and petroleum refineries to implement inherent safety reviews and make changes based on these reviews.
Quantification
The Dow Fire and Explosion Index is essentially a measure of inherent danger and is the most widely used quantification of inherent safety. A more specific index of inherently safe design has been proposed by Heikkilä, and variations of this have been published. However all of these are much more complex than the Dow F & E Index.Links and Further Reading
- Kletz, Trevor (1998) Process Plants: A Handbook for Inherently Safer Design CRC ISBN 1560326190
- Dow's Fire & Explosion Index Hazard Classification Guide, 7th Edition (1994)American Institute of Chemical Engineers (AIChE) ISBN 0-8169-0623-8
- Bollinger, R. Et al. (1996) Inherently Safer Chemical Processes: A Life Cycle Approach AIChE ISBN 9780816907038
- Howat, C. S. (2002) Introduction to Inherently Safer Chemical Processes
- Mansfield, D., Poulter, L., & Kletz, T., (1996) Improving Inherent Safety HMSO ISBN 0-71716-1307-0
- Mary Kay O’Connor Process Safety Center (2002) Challenges in Implementing Inherent Safety Principles in New and Existing Chemical Processes
- M. Gentile (2004) Development of a Hierarchical Fuzzy Model for the Evaluation of Inherent Safety
- Safer Design Front Loading Safety in Design
See also
- Intrinsic safetyIntrinsic safetyIntrinsic safety is a protection technique for safe operation of electronic equipment in explosive atmospheres and under irregular operating conditions. The concept was developed for safe operation of process control instrumentation in hazardous areas, particularly North Sea gas platforms...
(occasionally confused terminology) - Passively safe
- Fail-safeFail-safeA fail-safe or fail-secure device is one that, in the event of failure, responds in a way that will cause no harm, or at least a minimum of harm, to other devices or danger to personnel....
- Safety engineeringSafety engineeringSafety engineering is an applied science strongly related to systems engineering / industrial engineering and the subset System Safety Engineering...