Highland Railway Classes prior to 1870
Encyclopedia
The Highland Railway
began as the Inverness and Nairn Railway
(later the Inverness and Aberdeen Junction Railway), which operated the other lines which became part of the Highland Railway on its formation in 1865.
. The locomotives supplied initially were classic Allan designs, small 2-2-2s and 2-4-0s, outside cylindered and with external framing and (initially at least) not even a weatherboard to protect the enginemen. It was later decided that a cab was essential to protect them from winter weather. Only four of the Barclay era locomotives, all rebuilt by Jones, were still in service at the time of the Grouping in 1923.
They were :
! HR number !! Name
|-
| 1 >
Raigmore
>-
| 2
Aldourie
>-
| 3
St Martins
>-
| 4
In around 1869, nos. 3 and 4 were scrapped, and their driving wheels were used by Stroudley to rebuild nos. 1 and 2 as 2-4-0s. No. 1 was withdrawn within a few years, but no. 2 received a more extensive rebuild, gaining a larger boiler and 15.5 by 22 inch cylinders, and lasted until 1899.
! HR number !! Name
|-
|5 >
Seafield
>-
| 6
Bruce
>-
|7
Fife
>-
| 8
Altyre
>-
| 9
Aultnaskiah
>-
|10
Westhall
>-
|11
Stafford
In 1873 Jones rebuilt no. 10 as a 4-4-0 to counter flange wear problems on the Dingwall & Skye line. He used the Adams bogie arrangement and replaced the cylinders with new ones of 17 inch bore and 24 inch stroke. This engine was effectively the prototype for the F Class
built from 1874 onwards. In 1875 a second locomotive (no. 7) was similarly rebuilt, although this seems to have been a trial for new features adopted for the Skye bogies
. The other 5 locomotives of this batch remained as 2-4-0s but were rebuilt with cabs and longer (24 inch stroke) cylinders between 1875 and 1880. All were withdrawn between 1893 and 1899.
! HR number !! Name>
12
Belladrum
13
Lovat
No. 13 was withdrawn in 1890. In 1871 no. 12 was rebuilt by Jones as a 2-2-2T for branch line work, in which form it survived until 1898.
! HR number !! Name
|-
| 14 >
|15
Sutherland
Later they were rebuilt with 17 inch bore x 24 inch stroke cylinders and 5 foot 2.5 inch driving wheels. No. 15 was withdrawn in 1893, while no. 14 lasted until 1901 (having been renumbered 6 and then 49).
0-4-0ST locomotive dating from 1860. It had 3 foot 6 inch wheels and 12 x 16 inch cylinders.
! HR number !! Name
|-
| 16 >
Findhorn (name not confirmed)
It was sold to a contractor in 1872.
! HR number !! Name
|-
| 17 >
Hopeman
As built, it proved to be rather unstable and was therefore converted to an 0-4-2T by Stroudley. It later became a stationary engine to power the Lochgorm works sawmill. It returned to traffic as no. 1A in 1898, and was finally withdrawn in 1902.
! HR number !! Name
|-
| 18 >
|19
|20
| 21
| 22
|23
|24
| 25
|26
|27
Conon
The next year, Sharp, Stewart supplied ten more, with the stroke increased to 24 inches but otherwise identical.
! HR number !! Name
|-
| 36 >
| 37
|38
|39
|40
| 41
|42
|43
|44
|45
Dalcross
All were rebuilt by Jones between 1874 and 1893, gaining 18 x 26 inch cylinders, and having their driving wheels increased to 5 feet 3 inches by means of applying thicker tyres. Withdrawals commenced in 1896, but nos. 27, 37 and 42 survived into LMS ownership.
Two were built by Hawthorns in 1863 with 17 inch bore cylinders:
! HR number !! Name
|-
|28 >
|29
Highlander
Six more were built by Neilson and Company in 1863 with 16.5 inch bore cylinders. They were all converted to 17 inch bore at an unspecified later date.
! HR number !! Name
|-
|30 >
|31
|32
|33
| 34
| 35
Kingsmills
A further batch of ten was built by Neilson in 1864. They had 17 inch bore cylinders.
! HR number !! Name
|-
| 46 >
|47
|48
| 49
|50
|51
| 52
| 53
| 54
| 55
Cluny
With increased traffic, especially over the Perth line, heavier locomotives were needed, but the company was short of money. Jones responded by following Stroudley's example of rebuilding 2-2-2s as 2-4-0s. No. 29 was the first to be rebuilt in 1871, and by 1893 all except no. 32 had been so converted. Cylinder dimensions were increased to 18 x 24 inches. Seven locomotives received larger boilers between 1881 and 1896, and the others were withdrawn between 1897 and 1900. The reboilered examples lasted longer, and no. 35 was still in service (latterly renumbered 35A) at the Grouping.
's tenure as locomotive superintendent from 1865-69 only one new locomotive was built. This was an 0-6-0ST built at the Highland Railway's Lochgorm works in Inverness in 1869. This is generally considered the basis of the LB&SCR "Terrier" locomotives
he produced later in his career. Two similar locomotives were built under Jones' in 1873 and 1874. They had 3 foot 7 inch wheels and 14 inch by 20 inch cylinders. The boiler of the first is believed to have come from no. 3.
! HR number !! Name
|-
| 56 >
|57
| 16
St Martin's
No. 56 was rebuilt by Jones in 1895, and the other two were similarly rebuilt by Drummond in 1897. Alterations included thicker tyres to increase the wheel diameter to 3 foot 6 inches, and the provision of larger bunkers. No. 16 was later renumbered 49. All three passed to the LMS in 1923.
Renaming of locomotives was common in the early years, and only the first name is recorded here. Part of the reason for multiple engines having the same name was that names were applied to locomotives used on an appropriate part of the line. If an engine was reallocated then the name was moved to another. The name Bruce was commonly used for Highland Railway locomotives (five bore it all told), and contrary to common opinion it is not in memory of King Robert the Bruce but of the Hon C T Bruce who was Chairman of the company from 1885 to 1891 (and had earlier been Chairman of the Inverness and Perth Junction Railway).
The chimney was really a pair of concentric ones. It is usually considered to have been adopted to aid forward visibility for the driver (a rather different pattern of smoke deflector), but there is some evidence that the real reason was to reduce the chance of lineside fires (rather like the prominent 'stacks' of early USA designs).
Highland Railway
The Highland Railway was one of the smaller British railways before the Railways Act 1921; it operated north of Perth railway station in Scotland and served the farthest north of Britain...
began as the Inverness and Nairn Railway
Inverness and Nairn Railway
The Inverness and Nairn Railway was a railway worked by, and later absorbed by the Inverness and Aberdeen Junction Railway.- History :The line was opened in the year 1855 and connected the towns of Inverness and Nairn. Opening had been delayed from 1 August 1855 due to delays in the contractor's...
(later the Inverness and Aberdeen Junction Railway), which operated the other lines which became part of the Highland Railway on its formation in 1865.
William Barclay
The first locomotive superintendent was William Barclay, who was a nephew of Alexander AllanAlexander Allan (locomotive engineer)
Alexander Allan was a Scottish mechanical engineer. He was born at Montrose, Angus, in 1809 and died on 2 June 1891.From 1843 to 1853 he was Works Manager at the Crewe Works of the Grand Junction Railway, later London and North Western Railway, under Francis Trevithick. Here he was responsible for...
. The locomotives supplied initially were classic Allan designs, small 2-2-2s and 2-4-0s, outside cylindered and with external framing and (initially at least) not even a weatherboard to protect the enginemen. It was later decided that a cab was essential to protect them from winter weather. Only four of the Barclay era locomotives, all rebuilt by Jones, were still in service at the time of the Grouping in 1923.
Raigmore class
The first locomotives were two 2-2-2s were supplied by Hawthorns and Company of Leith in 1855, and a second pair delivered in 1857. Cylinder dimensions were 15 by 20 inches (381 by 508 mm), and driving wheel diameters were 6 feet 0 inches (1.8 m). The boiler pressure was originally 100 lbf/in² (690 kPa), later being revised to 120 lbf/in² (830 kPa).They were :
|-
|
>-
|
>-
|
>-
|
In around 1869, nos. 3 and 4 were scrapped, and their driving wheels were used by Stroudley to rebuild nos. 1 and 2 as 2-4-0s. No. 1 was withdrawn within a few years, but no. 2 received a more extensive rebuild, gaining a larger boiler and 15.5 by 22 inch cylinders, and lasted until 1899.
Seafield class
A batch of seven 2-4-0s with 16 inch bore x 22 inch stroke cylinders and 5 foot 0 inch driving wheels were supplied by Hawthorns between 1858 and 1859 for goods service. Boiler pressure was originally 100 lb/square inch, later increased to 120 lb/square inch.|-
|
>-
|
>-
|
>-
|
>-
|
>-
|
>-
|
In 1873 Jones rebuilt no. 10 as a 4-4-0 to counter flange wear problems on the Dingwall & Skye line. He used the Adams bogie arrangement and replaced the cylinders with new ones of 17 inch bore and 24 inch stroke. This engine was effectively the prototype for the F Class
Highland Railway F Class
The Highland Railway F class 4-4-0s were a class of British steam locomotives introduced in 1874. The first 10 were built by Dübs and Company in 1874. A further seven were built in Lochgorm works between 1876 and 1888....
built from 1874 onwards. In 1875 a second locomotive (no. 7) was similarly rebuilt, although this seems to have been a trial for new features adopted for the Skye bogies
Highland Railway L Class
The Highland Railway Jones L Class 4-4-0s were more commonly known as 'Skye Bogies' due to their association with the Kyle of Lochalsh Line. They were essentially mixed traffic versions of the earlier F Class...
. The other 5 locomotives of this batch remained as 2-4-0s but were rebuilt with cabs and longer (24 inch stroke) cylinders between 1875 and 1880. All were withdrawn between 1893 and 1899.
Belladrum class
A pair of 2-2-2s with 16 inch x 22 inch cylinders was supplied by Hawthorns in 1862. Driving wheels were 6 foot 0 inches, boiler pressure was originally 100 lb/square inch, later increased to 120 lb/square inch. They were the first locomotives supplied with cabs from new.No. 13 was withdrawn in 1890. In 1871 no. 12 was rebuilt by Jones as a 2-2-2T for branch line work, in which form it survived until 1898.
14 class
Two 2-4-0s were supplied by Hawthorns in 1862. They were similar to but slightly larger than the earlier batch, and were fitted with cabs from new. They were:|-
|
|
Later they were rebuilt with 17 inch bore x 24 inch stroke cylinders and 5 foot 2.5 inch driving wheels. No. 15 was withdrawn in 1893, while no. 14 lasted until 1901 (having been renumbered 6 and then 49).
Findhorn railway
In 1862 the Findhorn Railway was taken over, along with its sole locomotive, a Neilson and CompanyNeilson and Company
Neilson and Company was a locomotive manufacturer in Glasgow, Scotland.The company was started in 1836 at McAlpine Street by Walter Neilson and James Mitchell to manufacture marine and stationary engines...
0-4-0ST locomotive dating from 1860. It had 3 foot 6 inch wheels and 12 x 16 inch cylinders.
|-
|
It was sold to a contractor in 1872.
Needlefield Tank
A small 0-4-0T was built by Hawthorns in 1863 for the Burghead branch line. It had 4 foot driving wheels and 13 x 18 inch inside cylinders.|-
|
As built, it proved to be rather unstable and was therefore converted to an 0-4-2T by Stroudley. It later became a stationary engine to power the Lochgorm works sawmill. It returned to traffic as no. 1A in 1898, and was finally withdrawn in 1902.
Small and Medium Goods
Ten 2-4-0s were supplied by Sharp, Stewart and Company in 1863. They had 17 inch x 22 inch cylinders, 150 lb/square inch boilers and 5 foot 1.5 inch driving wheels.|-
|
|
|
|
|
|
|
|
|
|
The next year, Sharp, Stewart supplied ten more, with the stroke increased to 24 inches but otherwise identical.
|-
|
|
|
|
|
|
|
|
|
|
All were rebuilt by Jones between 1874 and 1893, gaining 18 x 26 inch cylinders, and having their driving wheels increased to 5 feet 3 inches by means of applying thicker tyres. Withdrawals commenced in 1896, but nos. 27, 37 and 42 survived into LMS ownership.
Glenbarry class
Three batches of 2-2-2s were supplied in 1863/64. They all had 120 lb/square inch boilers and cylinders with a 22 inch stroke. Driving wheels were 6 foot 1.5 inches.Two were built by Hawthorns in 1863 with 17 inch bore cylinders:
|-
|
|
Six more were built by Neilson and Company in 1863 with 16.5 inch bore cylinders. They were all converted to 17 inch bore at an unspecified later date.
|-
|
|
|
|
|
|
A further batch of ten was built by Neilson in 1864. They had 17 inch bore cylinders.
|-
|
|
|
|
|
|
|
|
|
|
With increased traffic, especially over the Perth line, heavier locomotives were needed, but the company was short of money. Jones responded by following Stroudley's example of rebuilding 2-2-2s as 2-4-0s. No. 29 was the first to be rebuilt in 1871, and by 1893 all except no. 32 had been so converted. Cylinder dimensions were increased to 18 x 24 inches. Seven locomotives received larger boilers between 1881 and 1896, and the others were withdrawn between 1897 and 1900. The reboilered examples lasted longer, and no. 35 was still in service (latterly renumbered 35A) at the Grouping.
Lochgorm Tanks
During William StroudleyWilliam Stroudley
William Stroudley was one of Britain's most famous steam locomotive engineers of the nineteenth century, working principally for the London, Brighton and South Coast Railway...
's tenure as locomotive superintendent from 1865-69 only one new locomotive was built. This was an 0-6-0ST built at the Highland Railway's Lochgorm works in Inverness in 1869. This is generally considered the basis of the LB&SCR "Terrier" locomotives
LB&SCR A1 Class
The London, Brighton and South Coast Railway A1 Class is an English class of 0-6-0T steam locomotive. Designed by William Stroudley, 50 members of the class were built in 1872 and between 1874 and 1880, all at Brighton Works. The class have received several nicknames, initially being known as...
he produced later in his career. Two similar locomotives were built under Jones' in 1873 and 1874. They had 3 foot 7 inch wheels and 14 inch by 20 inch cylinders. The boiler of the first is believed to have come from no. 3.
|-
|
|
|
No. 56 was rebuilt by Jones in 1895, and the other two were similarly rebuilt by Drummond in 1897. Alterations included thicker tyres to increase the wheel diameter to 3 foot 6 inches, and the provision of larger bunkers. No. 16 was later renumbered 49. All three passed to the LMS in 1923.
Naming and Numbering
As will be apparent, the original numbering scheme was a simple chronological sequence, although Stroudley tank no. 16 was built as a replacement for the original Findhorn branch engine and received its number. In later years, new locomotives took some of the early numbers, and surviving early engines were either renumbered or given an 'A' suffix.Renaming of locomotives was common in the early years, and only the first name is recorded here. Part of the reason for multiple engines having the same name was that names were applied to locomotives used on an appropriate part of the line. If an engine was reallocated then the name was moved to another. The name Bruce was commonly used for Highland Railway locomotives (five bore it all told), and contrary to common opinion it is not in memory of King Robert the Bruce but of the Hon C T Bruce who was Chairman of the company from 1885 to 1891 (and had earlier been Chairman of the Inverness and Perth Junction Railway).
Classic Features
Features that arrived during the 1860s and stayed until the Peter Drummond days were the louvered chimneys and counter-pressure brake.The chimney was really a pair of concentric ones. It is usually considered to have been adopted to aid forward visibility for the driver (a rather different pattern of smoke deflector), but there is some evidence that the real reason was to reduce the chance of lineside fires (rather like the prominent 'stacks' of early USA designs).