Happy Computers
Encyclopedia
Happy Computers was a small company producing disk drive enhancements for the Atari 8-bit and Atari ST
computer
families. Happy Computers is most noted for the add-in boards for the Atari 810
and Atari 1050
disk drives, which achieved a tremendous speed improvement for reading and writing, and for the ability to back up floppies. Happy's products were among the most popular Atari computer
add-ons. They are still in use and active in the aftermarket today.
under the name Happy Computing. At that time, the 810 Happy was hand wired on the internal side board The name was changed to Happy Computers or HCI in 1983 when the company went from a sole proprietorship to a corporation.
HCI stopped shipping these products in 1990, and since then many other Atari Enthusiasts have reverse engineered and replicated the products because they were so popular and fun.
This was the first product released in 1982. The customer sent in either their 810 drive or the internal sideboard, and the upgrade was wired in. This consisted of a few extra logic chips, a different eprom and point to point wiring.
In addition to the buffered reading and writing with zero latency and faster serial i/o, it made backups of floppies.
810 Enhancement
This version of the 810 Happy board was a plug-in board with a better data separator and used sockets already in place on the 810 internal board without the need for any soldering or permanent modification.
In addition to the buffered reading and writing with zero latency and faster serial i/o, it made backups of floppies.
1050 Enhancement
After the 810, Atari
released the more reliable, enhanced density (130 KB) 1050 drive.
In addition to the extra storage, the serial I/O could be cranked up a notch even faster than the 810 Happy product by the faster speed of the 1050's 6502 processor.
The 1050 Enhancement was also a plug-in board, and could be installed without soldering or permanent modification.
In addition to the buffered reading and writing with zero latency and faster serial i/o, it supported true double density (180 KB). Additionally, it made backups of floppies. It is to be noted that Atari 1050 drives stopped production more than 20 years ago, and Happy Computers stopped selling products about 18 years ago. In spite of this, the popularity of Happy Computer's products continues and is still being reviewed in 2008.
Developers are still writing new software to support Happy Drives. For example, linux drivers.
1050 Controller
The 1050 Controller was a small board that was installed inside the 1050 Happy drive that had 2 switches and an led that allowed enabling or disabling disk write-protect to override the notch in the disk. It also allowed switch selection of a slower mode to provide compatibility with some picky programs. Some commercial software only ran in the original slow speed mode. The controller required a mechanical modification to the drive's enclosure and hence its installation was harder that the happy board.
Warp Speed Software
The software that came with the Happy boards had many options.
IBMXFR Program
This program was included with the Warp Speed Software. It allowed transferring files back and forth between an Atari and an IBM disk using a Happy enhanced 1050 drive. Because the 1050 was a single sided drive with only one head, the disk had to be formatted as SS (180K). The IBM disk could even be formatted on the 1050 drive.
The Discovery Cartridge was a device that plugged into the cartridge slot of the Atari ST
Computer.
It backed up floppies and had connectors to allow a 3rd and 4th drive to be hooked up. The original ST computer only allowed for two floppy drives, and the extra drives were handy.
There were 4 different options available. Options included a pass through for another cartridge, a switch to bank select larger cartridges, and a switch to select/deselect the extra drives. There was also a battery backed up Time of Day clock option in the Discovery Cartridge, a significant oversight the Atari ST
lacked in the stock configuration.
The power of the "HART" chip (Happy Atari Rotating Thing), designed by Richard Adams, allowed standard Atari drives to read the unusual Macintosh variable speed disks without needing a variable speed drive. The disks were then re-written in a standard "constant speed" 3.5 inch compatible format called Magic format. This allowed using the various Mac emulator products that would run most efficiently with Magic format disks. At least one of the Macintosh emulators also had a circuit to read Mac disks, but could make the emulations slower and less reliable. It was faster and more efficient to convert Mac disks to Magic format first.
The HART chip also allowed copying conventional ST disks much faster. The computer floppy controller required two passes per track, three with verification. The HART chip could format and write in the same pass, saving one pass per track.
Q-Verter Cartridge
This was a smaller version of The Discovery Cartridge that plugged into the Atari ST cartridge slot and had a cable for 1 drive that allowed converting Mac disks.
Atari ST
The Atari ST is a home/personal computer that was released by Atari Corporation in 1985 and commercially available from that summer into the early 1990s. The "ST" officially stands for "Sixteen/Thirty-two", which referred to the Motorola 68000's 16-bit external bus and 32-bit internals...
computer
Computer
A computer is a programmable machine designed to sequentially and automatically carry out a sequence of arithmetic or logical operations. The particular sequence of operations can be changed readily, allowing the computer to solve more than one kind of problem...
families. Happy Computers is most noted for the add-in boards for the Atari 810
Atari
Atari is a corporate and brand name owned by several entities since its inception in 1972. It is currently owned by Atari Interactive, a wholly owned subsidiary of the French publisher Atari, SA . The original Atari, Inc. was founded in 1972 by Nolan Bushnell and Ted Dabney. It was a pioneer in...
and Atari 1050
Atari
Atari is a corporate and brand name owned by several entities since its inception in 1972. It is currently owned by Atari Interactive, a wholly owned subsidiary of the French publisher Atari, SA . The original Atari, Inc. was founded in 1972 by Nolan Bushnell and Ted Dabney. It was a pioneer in...
disk drives, which achieved a tremendous speed improvement for reading and writing, and for the ability to back up floppies. Happy's products were among the most popular Atari computer
Atari
Atari is a corporate and brand name owned by several entities since its inception in 1972. It is currently owned by Atari Interactive, a wholly owned subsidiary of the French publisher Atari, SA . The original Atari, Inc. was founded in 1972 by Nolan Bushnell and Ted Dabney. It was a pioneer in...
add-ons. They are still in use and active in the aftermarket today.
History
Happy Computers was formed in 1982 by Richard AdamsRichard Adams (inventor)
Richard Adams is an independent inventor and engineer. Since building and demonstrating a video camera as a child, his work has often garnered media interest.-TV camera:...
under the name Happy Computing. At that time, the 810 Happy was hand wired on the internal side board The name was changed to Happy Computers or HCI in 1983 when the company went from a sole proprietorship to a corporation.
HCI stopped shipping these products in 1990, and since then many other Atari Enthusiasts have reverse engineered and replicated the products because they were so popular and fun.
Atari 8-bit products
810 UpgradeThis was the first product released in 1982. The customer sent in either their 810 drive or the internal sideboard, and the upgrade was wired in. This consisted of a few extra logic chips, a different eprom and point to point wiring.
In addition to the buffered reading and writing with zero latency and faster serial i/o, it made backups of floppies.
810 Enhancement
This version of the 810 Happy board was a plug-in board with a better data separator and used sockets already in place on the 810 internal board without the need for any soldering or permanent modification.
In addition to the buffered reading and writing with zero latency and faster serial i/o, it made backups of floppies.
1050 Enhancement
After the 810, Atari
Atari
Atari is a corporate and brand name owned by several entities since its inception in 1972. It is currently owned by Atari Interactive, a wholly owned subsidiary of the French publisher Atari, SA . The original Atari, Inc. was founded in 1972 by Nolan Bushnell and Ted Dabney. It was a pioneer in...
released the more reliable, enhanced density (130 KB) 1050 drive.
In addition to the extra storage, the serial I/O could be cranked up a notch even faster than the 810 Happy product by the faster speed of the 1050's 6502 processor.
The 1050 Enhancement was also a plug-in board, and could be installed without soldering or permanent modification.
In addition to the buffered reading and writing with zero latency and faster serial i/o, it supported true double density (180 KB). Additionally, it made backups of floppies. It is to be noted that Atari 1050 drives stopped production more than 20 years ago, and Happy Computers stopped selling products about 18 years ago. In spite of this, the popularity of Happy Computer's products continues and is still being reviewed in 2008.
Developers are still writing new software to support Happy Drives. For example, linux drivers.
1050 Controller
The 1050 Controller was a small board that was installed inside the 1050 Happy drive that had 2 switches and an led that allowed enabling or disabling disk write-protect to override the notch in the disk. It also allowed switch selection of a slower mode to provide compatibility with some picky programs. Some commercial software only ran in the original slow speed mode. The controller required a mechanical modification to the drive's enclosure and hence its installation was harder that the happy board.
Warp Speed Software
The software that came with the Happy boards had many options.
- Warp Speed Dos
- Diagnostics for the Enhancement and the drive such as high speed xfer, RPM and read/write testing
- Fast, slow and unHappy mode drive options for compatibility
- Tracer mode for evaluating wasted space on floppies
- Happy Compactor which allows organizing and combining multiple floppies into one.
- Happy Backup for backing up floppies
- Multi Drive, which allows high speed simultaneous writing with up to 4 Happy enhanced drives.
- Sector copier
IBMXFR Program
This program was included with the Warp Speed Software. It allowed transferring files back and forth between an Atari and an IBM disk using a Happy enhanced 1050 drive. Because the 1050 was a single sided drive with only one head, the disk had to be formatted as SS (180K). The IBM disk could even be formatted on the 1050 drive.
Atari 16-bit products
Discovery CartridgeThe Discovery Cartridge was a device that plugged into the cartridge slot of the Atari ST
Atari ST
The Atari ST is a home/personal computer that was released by Atari Corporation in 1985 and commercially available from that summer into the early 1990s. The "ST" officially stands for "Sixteen/Thirty-two", which referred to the Motorola 68000's 16-bit external bus and 32-bit internals...
Computer.
It backed up floppies and had connectors to allow a 3rd and 4th drive to be hooked up. The original ST computer only allowed for two floppy drives, and the extra drives were handy.
There were 4 different options available. Options included a pass through for another cartridge, a switch to bank select larger cartridges, and a switch to select/deselect the extra drives. There was also a battery backed up Time of Day clock option in the Discovery Cartridge, a significant oversight the Atari ST
Atari ST
The Atari ST is a home/personal computer that was released by Atari Corporation in 1985 and commercially available from that summer into the early 1990s. The "ST" officially stands for "Sixteen/Thirty-two", which referred to the Motorola 68000's 16-bit external bus and 32-bit internals...
lacked in the stock configuration.
The power of the "HART" chip (Happy Atari Rotating Thing), designed by Richard Adams, allowed standard Atari drives to read the unusual Macintosh variable speed disks without needing a variable speed drive. The disks were then re-written in a standard "constant speed" 3.5 inch compatible format called Magic format. This allowed using the various Mac emulator products that would run most efficiently with Magic format disks. At least one of the Macintosh emulators also had a circuit to read Mac disks, but could make the emulations slower and less reliable. It was faster and more efficient to convert Mac disks to Magic format first.
The HART chip also allowed copying conventional ST disks much faster. The computer floppy controller required two passes per track, three with verification. The HART chip could format and write in the same pass, saving one pass per track.
Q-Verter Cartridge
This was a smaller version of The Discovery Cartridge that plugged into the Atari ST cartridge slot and had a cable for 1 drive that allowed converting Mac disks.
External links
- Antic Magazine, Vol. 4, NO. 3 / JULY 1985 / PAGE 40, by Eric Clausen, "EVERYTING YOU WANTED TO KNOW ABOUT EVERY D.O.S., Including the brand-new DOS 2.5"
- Analog Magazine #12 (Product Review)
- Antic Vol. 6, No. 10 - Feb 1988 (new product announcement)
- Antic Vol. 2, No. 5 (Q&A)
- Antic Vol. 2, No. 9 (product review)
- Antic Vol. 2, No. 4 (product review)
- AtariMania, "The World's Finest Atari Database"
- VintageComputerManuals.com, by Tim Patrick, PDF Document: Documentation for HappyXLVersion"
- classiccmp.org, "Atari 8-Bit Computers Frequently Asked Questions List"
- "Drive tests" by Mark D. Elliott, August 16 1989