![](http://image.absoluteastronomy.com/images//topicimages/noimage.gif)
FEOL
Encyclopedia
FEOL denotes the first portion of IC fabrication where the individual devices (transistor
s, capacitor
s, resistor
s, etc.) are patterned in the semiconductor
. FEOL generally covers everything up to (but not including) the deposition of metal interconnect layers.
FEOL contains all processes of CMOS
fabrication needed to form fully isolated CMOS elements:
Transistor
A transistor is a semiconductor device used to amplify and switch electronic signals and power. It is composed of a semiconductor material with at least three terminals for connection to an external circuit. A voltage or current applied to one pair of the transistor's terminals changes the current...
s, capacitor
Capacitor
A capacitor is a passive two-terminal electrical component used to store energy in an electric field. The forms of practical capacitors vary widely, but all contain at least two electrical conductors separated by a dielectric ; for example, one common construction consists of metal foils separated...
s, resistor
Resistor
A linear resistor is a linear, passive two-terminal electrical component that implements electrical resistance as a circuit element.The current through a resistor is in direct proportion to the voltage across the resistor's terminals. Thus, the ratio of the voltage applied across a resistor's...
s, etc.) are patterned in the semiconductor
Semiconductor
A semiconductor is a material with electrical conductivity due to electron flow intermediate in magnitude between that of a conductor and an insulator. This means a conductivity roughly in the range of 103 to 10−8 siemens per centimeter...
. FEOL generally covers everything up to (but not including) the deposition of metal interconnect layers.
FEOL contains all processes of CMOS
CMOS
Complementary metal–oxide–semiconductor is a technology for constructing integrated circuits. CMOS technology is used in microprocessors, microcontrollers, static RAM, and other digital logic circuits...
fabrication needed to form fully isolated CMOS elements:
- Selecting the type of waferWafer (electronics)A wafer is a thin slice of semiconductor material, such as a silicon crystal, used in the fabrication of integrated circuits and other microdevices...
to be used; Chemical-mechanical planarizationChemical-mechanical planarizationChemical Mechanical Polishing/Planarization is a process of smoothing surfaces with the combination of chemical and mechanical forces. It can be thought of as a hybrid of chemical etching and free abrasive polishing.-Description:...
and cleaning of the wafer. - Shallow trench isolationShallow trench isolationShallow trench isolation , also known as Box Isolation Technique, is an integrated circuit feature which prevents electrical current leakage between adjacent semiconductor device components. STI is generally used on CMOS process technology nodes of 250 nanometers and smaller...
(STI) (or LOCOSLOCOSLOCOS, short for LOCal Oxidation of Silicon, is a microfabrication process where silicon dioxide is formed in selected areas on a silicon wafer having the Si-SiO2 interface at a lower point than the rest of the silicon surface....
in early processes, with feature size > 0.25 μm) - Well formation
- Gate module formation
- Source and drain module formation
Reading
- "CMOS: Circuit Design, Layout, and Simulation" Wiley-IEEE, 2010. ISBN 978-0-470-88132-3. pages 177-178 (Chapter 7.2 CMOS Process Integration); pages 180-199 (7.2.1 Frontend-of-the-line integration)