Corrected Flow is the mass flow that would pass through a device (e.g. compressor, bypass duct, etc.) if the inlet pressure and temperature corresponded to ambient conditions at Sea Level, on a Standard Day (i.e. 14.696 lbf/in², 518.7R).

Corrected Flow ,, can be calculated as follows, assuming Imperial Units:



Corrected Flow is often given the symbol or (for referred flow).

So-called Non-Dimensional Flow is proportional to Corrected Flow:



The equivalent equations for Preferred SI Units are: (101.325kPa, 288.15K)





Nomenclature:

• Stagnation (or Total) Pressure

• Stagnation (or Total) Temperature

• Real Mass Flow

• Referred Pressure

• Referred Temperature

In relative form, Corrected Flow, Referred Flow and Non-Dimensional Flow are all measures of axial Mach number.

Side note:
If the mass flow can be consider an energy source such as fuel flow, the corrected flow is calculated as follows: