C79 Optical Sight
Encyclopedia
The C79 Optical sight is a small arms telescopic sight
of 3.4x28 magnification. A tritium illuminated reticle provides for normal and low-light conditions sighting. The sight itself is Nitrogen
-purged to prevent fogging and is covered with an armoured coating of rubber
. It can be mounted to a variety of rifles and light machine guns using the M1913 Picatinny rail mounting system or the similar "Diemaco" rail system found on small arms produced by Diemaco / Colt Canada. It is manufactured by Elcan and can be found on military service weapons around the world. Its Elcan product name is the SpecterOS3.4x, although in Canadian service, it is typically referred to as the C79 or the C79A2. Similar rifle sights are the Sight Unit Small Arms, Trilux
(SUSAT) and the Advanced Combat Optical Gunsight
(ACOG).
and is mounted on the Diemaco C7
and C7A2 service rifles, the C8 Carbine family, as well as the C9A1 Light Machine Gun. It is also used in the armies of Denmark
, the Royal Netherlands Army
and Netherlands Marine Corps
and Norway
.
In Canadian service, all C7A1 and -A2 rifles come equipped with a C79 sight as standard. The C7A1 uses a C79 sight, which is easily distinguished by its matte black rubber overcoating. After reviewing feedback from the soldiers who used the sight, Elcan produced the fourth generation mount C79, known as the C79A2, and is mounted onto the C7A2 rifle, as well as some C8A2 carbines. The C79A2 sight is a component of the C7A2 mid-life update program of the Canadian Forces' inventory of C7A1 rifle systems. The older rifles and sights are meant to be exchanged 1:1 and brought to the -A2 standard.
In Dutch service it is used on the Diemaco C7 (regular infantry), C7A1 (airmobile infantry) and C8, FN minimi
and FN MAG
series of firearm
s.
The (radioactive) tritium light source has to be replaced every 8–12 years, since it gradually loses its brightness due to radioactive decay
.
Windage
adjustments are made on the left hand side of the base, using a flat object such as a flat-head screwdriver or a coin. The windage adjustment is intended only for the initial sighting in procedure of the C79.
Elevation
adjustments are made via a rotary knob and are adjusted from 200-800m. To bring the sight to a proper elevation zero, a small "gate" must be elevated which disconnects the elevation cam and one mil clicks can now be made. For precise shooting, the gate is usually left open to allow for finer adjustments than the rougher presets. Target shooters will sometimes mark pre-established open gate adjustments with whiteout pens to remind them how many clicks must be made for each range. At close ranges, when rapid aiming is required, the emergency battle sights on top of the sight can be used, although they are very crude and only intended for use inside of 75m.
It has been noted that the external adjustments mount is an Achilles heel
of the C79 since it can be jammed by foreign matter and also adds to the weight of the sight.
s.
Telescopic sight
A telescopic sight, commonly called a scope, is a sighting device that is based on an optical refracting telescope. They are equipped with some form of graphic image pattern mounted in an optically appropriate position in their optical system to give an accurate aiming point...
of 3.4x28 magnification. A tritium illuminated reticle provides for normal and low-light conditions sighting. The sight itself is Nitrogen
Nitrogen
Nitrogen is a chemical element that has the symbol N, atomic number of 7 and atomic mass 14.00674 u. Elemental nitrogen is a colorless, odorless, tasteless, and mostly inert diatomic gas at standard conditions, constituting 78.08% by volume of Earth's atmosphere...
-purged to prevent fogging and is covered with an armoured coating of rubber
Rubber
Natural rubber, also called India rubber or caoutchouc, is an elastomer that was originally derived from latex, a milky colloid produced by some plants. The plants would be ‘tapped’, that is, an incision made into the bark of the tree and the sticky, milk colored latex sap collected and refined...
. It can be mounted to a variety of rifles and light machine guns using the M1913 Picatinny rail mounting system or the similar "Diemaco" rail system found on small arms produced by Diemaco / Colt Canada. It is manufactured by Elcan and can be found on military service weapons around the world. Its Elcan product name is the SpecterOS3.4x, although in Canadian service, it is typically referred to as the C79 or the C79A2. Similar rifle sights are the Sight Unit Small Arms, Trilux
SUSAT
The Sight Unit Small Arms, Trilux, or SUSAT, is a 4× telescopic sight with tritium-powered illumination, utilised at dusk or dawn. The full name of the current model is the SUSAT L9A1. The sight is not designed as a sniper sight, but is rather intended to be mounted on a variety of rifles and to...
(SUSAT) and the Advanced Combat Optical Gunsight
Advanced Combat Optical Gunsight
Advanced Combat Optical Gunsights are a series of telescopic sights manufactured by Trijicon. The ACOG is designed to be used on the M16 rifle and M4 carbine, but Trijicon has developed ACOG accessories for certain other firearms...
(ACOG).
Use
The Elcan C79 is the primary sighting system for the small arms of the Canadian ForcesCanadian Forces
The Canadian Forces , officially the Canadian Armed Forces , are the unified armed forces of Canada, as constituted by the National Defence Act, which states: "The Canadian Forces are the armed forces of Her Majesty raised by Canada and consist of one Service called the Canadian Armed Forces."...
and is mounted on the Diemaco C7
Diemaco C7
The Colt Canada C7 rifle is a service rifle variation of the M16 rifle that is manufactured by Diemaco/Colt Canada, a subsidiary of Colt Firearms after 2005, and used by the Canadian Forces, Hærens Jegerkommando , Military of Denmark , Iceland Crisis Response Unit, the Military of the Netherlands ...
and C7A2 service rifles, the C8 Carbine family, as well as the C9A1 Light Machine Gun. It is also used in the armies of Denmark
Denmark
Denmark is a Scandinavian country in Northern Europe. The countries of Denmark and Greenland, as well as the Faroe Islands, constitute the Kingdom of Denmark . It is the southernmost of the Nordic countries, southwest of Sweden and south of Norway, and bordered to the south by Germany. Denmark...
, the Royal Netherlands Army
Royal Netherlands Army
The Royal Netherlands Army is the land forces element of the military of the Netherlands.-Short history:The Royal Netherlands Army was raised on 9 January 1814, but its origins date back to 1572, when the so-called Staatse Leger was raised...
and Netherlands Marine Corps
Netherlands Marine Corps
The Korps Mariniers is the marine corps and amphibious infantry component of the Royal Netherlands Navy. The marines are trained to operate anywhere in the world in all environments, under any condition and circumstance, as a rapid reaction force. The Korps Mariniers can be deployed to a given...
and Norway
Norway
Norway , officially the Kingdom of Norway, is a Nordic unitary constitutional monarchy whose territory comprises the western portion of the Scandinavian Peninsula, Jan Mayen, and the Arctic archipelago of Svalbard and Bouvet Island. Norway has a total area of and a population of about 4.9 million...
.
In Canadian service, all C7A1 and -A2 rifles come equipped with a C79 sight as standard. The C7A1 uses a C79 sight, which is easily distinguished by its matte black rubber overcoating. After reviewing feedback from the soldiers who used the sight, Elcan produced the fourth generation mount C79, known as the C79A2, and is mounted onto the C7A2 rifle, as well as some C8A2 carbines. The C79A2 sight is a component of the C7A2 mid-life update program of the Canadian Forces' inventory of C7A1 rifle systems. The older rifles and sights are meant to be exchanged 1:1 and brought to the -A2 standard.
In Dutch service it is used on the Diemaco C7 (regular infantry), C7A1 (airmobile infantry) and C8, FN minimi
FN Minimi
The Minimi is a Belgian 5.56mm light machine gun developed by Fabrique Nationale in Herstal by Ernest Vervier. First introduced in 1974, it has entered service with the armed forces of over thirty countries...
and FN MAG
FN MAG
The FN MAG is a Belgian 7.62 mm general-purpose machine gun, designed in the early 1950s at Fabrique Nationale by Ernest Vervier. It has been used by more than 80 countries, and it has been made under licence in countries such as Argentina, Egypt, India, Singapore, the United Kingdom and the...
series of firearm
Firearm
A firearm is a weapon that launches one, or many, projectile at high velocity through confined burning of a propellant. This subsonic burning process is technically known as deflagration, as opposed to supersonic combustion known as a detonation. In older firearms, the propellant was typically...
s.
Reticle
The reticle of the C79 sight was designed to serve on the C9 Light Machine Gun, thus an appropriate pattern was chosen to aid the gunner in judging distance. The reticle consists of a single vertical post with a sharp tip in the center. The tip is flanked by horizontal Mil-bars on either side. Under the left-hand Mil-bar, a second horizontal bar was added for judging distances.The (radioactive) tritium light source has to be replaced every 8–12 years, since it gradually loses its brightness due to radioactive decay
Radioactive decay
Radioactive decay is the process by which an atomic nucleus of an unstable atom loses energy by emitting ionizing particles . The emission is spontaneous, in that the atom decays without any physical interaction with another particle from outside the atom...
.
Operation
The C79 sight is attached to a mounting rail on the receiver of the weapon. On CF weapons, this is in the form of a modified Weaver rail, also known as a "Diemaco rail". Two adjustment knobs are used to secure the base to the receiver. A bore-sighting device is usually used to roughly zero the sight before a first-time shooter takes it to the range. Adjustments come in 0.25-mil clicks (one mil equals about 10cm at a range of 100m, so each click adjust the sight by about 2.5cm). Sighting in a C79 sight is normally done at a range of 200 m.Windage
Windage
Windage is a force created on an object by friction when there is relative movement between air and the object.There are two causes of windage:# the object is moving and being slowed by resistance from the air...
adjustments are made on the left hand side of the base, using a flat object such as a flat-head screwdriver or a coin. The windage adjustment is intended only for the initial sighting in procedure of the C79.
Elevation
Elevation (ballistics)
In ballistics, the elevation is the angle between the horizontal plane and the direction of the barrel of a gun, mortar or heavy artillery. Originally, elevation was a linear measure of how high the gunners had to physically lift the muzzle of a gun up from the gun carriage to hit targets at a...
adjustments are made via a rotary knob and are adjusted from 200-800m. To bring the sight to a proper elevation zero, a small "gate" must be elevated which disconnects the elevation cam and one mil clicks can now be made. For precise shooting, the gate is usually left open to allow for finer adjustments than the rougher presets. Target shooters will sometimes mark pre-established open gate adjustments with whiteout pens to remind them how many clicks must be made for each range. At close ranges, when rapid aiming is required, the emergency battle sights on top of the sight can be used, although they are very crude and only intended for use inside of 75m.
It has been noted that the external adjustments mount is an Achilles heel
Achilles Heel
Achilles Heel may refer to:* Achilles' heel, a metaphor for a fatal weakness in spite of overall strength* Achilles Heel , music by Pedro the Lion* Achilles Heel , off Antarctica...
of the C79 since it can be jammed by foreign matter and also adds to the weight of the sight.
Dimensions
- Length x Width x Height = 165 x 57 x 86 mm
- Weight = 690 g
- Magnification = 3.4x
- Field of View = 8 degrees (14.1 m @ 100m)
- Entrance Pupil Diameter = 28 mm
- Exit Pupil Diameter = 8.5 mm
- Eye Relief = 70 mm
Variants
C79A2
This model features a green rubber coating and "C79A2" is etched on the left side of the optic. This model is used on C7A2 and some C8A2 rifles. The United States also uses this optic on some of its M4 CarbineM4 Carbine
The M4 carbine is a family of firearms tracing its lineage back to earlier carbine versions of the M16, all based on the original AR-15 designed by Eugene Stoner and made by ArmaLite. It is a shorter and lighter variant of the M16A2 assault rifle, with 80% parts commonality.It is a gas-operated,...
s.
M145 Machine Gun Optic
The M145 Machine Gun Optic is a variant of the C79 that was developed for the U.S. Army and is commonly mounted on M240 and M249 machine guns. The M145 is unusual when compared with other optical sights in use with the United States military in that ballistic compensation is in the mount, rather than in the reticle. The reticle is illuminated by a battery-powered LED with varying intensity settings. The mount fits directly to any MIL-STD-1913 Picatinny rail or receiver. Zero is retained despite repeated removal and re-attachment to the weapon. The M145 is extremely resistant to shock and water immersion and has an anti-reflection device and rubber lens caps.See also
- SUSATSUSATThe Sight Unit Small Arms, Trilux, or SUSAT, is a 4× telescopic sight with tritium-powered illumination, utilised at dusk or dawn. The full name of the current model is the SUSAT L9A1. The sight is not designed as a sniper sight, but is rather intended to be mounted on a variety of rifles and to...
- The British Army's equivalent of the C79. - Advanced Combat Optical GunsightAdvanced Combat Optical GunsightAdvanced Combat Optical Gunsights are a series of telescopic sights manufactured by Trijicon. The ACOG is designed to be used on the M16 rifle and M4 carbine, but Trijicon has developed ACOG accessories for certain other firearms...
(ACOG) - The United States Army's common equivalent of the C79.