Broadband Networks
Encyclopedia
The ideal telecommunication network has the following characteristics: broadband
, multi-media, multi-point, multi-rate and economical implementation for a diversity of services (multi-services) [1][2]. The Broadband Integrated Services Digital Network
(B-ISDN) provides these characteristics in today's networks. Asynchronous Transfer Mode
(ATM) is a target technology for meeting these requirements and is widely deployed as a broadband network [2].
These new data transmission requirements may require new transmission means other than the present overcrowded radio spectrum [3][4]. A modern telecommunications network (such as the broadband network) must provide all these different services (multi-services) to the user.
In contrast, modern communication services depart from the conventional telephony service in these three essential aspects. Modern communication services can be:
These aspects are examined individually in the following three sub-sections [5].
The information content of each medium may affect the information generated by other media. For example, voice could be transcribed into data via voice recognition, and data commands may control the way voice and video are presented. These interactions most often occur at the communication terminals, but may also occur within the network [2][3].
s), video teleconferencing on private corporate networks, and television on broadcast
radio or cable networks.
These networks are largely engineered for a specific application and are not suited to other applications. For example, the traditional telephone network is too noisy and inefficient for bursty data communication. On the other hand, data networks which store and forward messages using computers have very limited connectivity, usually do not have sufficient bandwidth for digitised voice and video signals, and suffer from unacceptable delays for the real-time signals. Television networks using the radio or the cable medium are largely broadcast networks with minimum switching facilities [2][3].
CATV (cable television), HDTV (high definition television), VoIP (voice over internet protocol), and broadband internet are some of the most common applications now being supported by fibre optic networks, in some cases directly to the home (FTTh – Fibre To The Home). These types of fibre optic networks incorporate a wide variety of products to support and distribute the signal from the central office to an optic node, and ultimately to the subscriber (end-user).
(B-ISDN) satisfies these needs [7]. The types of traffic supported by a broadband network can be classified according to three characteristics [6]:
[2] Saito, H., Teletraffic Technologies in ATM Networks, Artech House, 1993. ISBN 0-89006-622-1.
[3] Hui J., “Switching and traffic theory for integrated broadband networks”, Kluwer Academic Publishers, 1990. ISBN 0-7923-9061-X.
[4] Sexton M., Reid A., “Broadband Networking: ATM, SDH and SONET”, Artech House Inc., Boston, London, 1997. ISBN 0-89006-578-0.
[5] Ferguson P., Huston G., “Quality of Service: Delivering QoS on the Internet and in Corporate Networks”, John Wiley & Sons, Inc., 1998. ISBN 0-471-24358-2.
[6] ATM Traffic Control, Mark Juliano, http://www.byte.com/art/9412/sec10/art5.htm, Last accessed 3 March 2005.
[7] Congestion Control and Traffic Management in ATM Networks, Invited submission to Computer Networks and ISDN Systems, Vol 28 (1996), 1723-1738, Raj Jain, http://www.cse.ohio-state.edu/~jain/papers/ftp/cnis/index.html, Last accessed 7 March 2005.
Broadband
The term broadband refers to a telecommunications signal or device of greater bandwidth, in some sense, than another standard or usual signal or device . Different criteria for "broad" have been applied in different contexts and at different times...
, multi-media, multi-point, multi-rate and economical implementation for a diversity of services (multi-services) [1][2]. The Broadband Integrated Services Digital Network
Broadband Integrated Services Digital Network
In the 1980s the telecommunications industry expected that digital services would follow much the same pattern as voice services did on the public switched telephone network, and conceived a grandiose end-to-end circuit switched services, known as Broadband Integrated Services Digital Network...
(B-ISDN) provides these characteristics in today's networks. Asynchronous Transfer Mode
Asynchronous Transfer Mode
Asynchronous Transfer Mode is a standard switching technique designed to unify telecommunication and computer networks. It uses asynchronous time-division multiplexing, and it encodes data into small, fixed-sized cells. This differs from approaches such as the Internet Protocol or Ethernet that...
(ATM) is a target technology for meeting these requirements and is widely deployed as a broadband network [2].
Modern communication services
Society is becoming more informationally and visually oriented. Personal computing facilitates easy access, manipulation, storage, and exchange of information, and these processes require reliable data transmission. The means or media for communicating data are becoming more diverse. Communicating documents by images and the use of high-resolution graphics terminals provide a more natural and informative mode of human interaction than do voice and data alone. Video teleconferencing enhances group interaction at a distance. High-definition entertainment video improves the quality of pictures, but requires much higher transmission rates.These new data transmission requirements may require new transmission means other than the present overcrowded radio spectrum [3][4]. A modern telecommunications network (such as the broadband network) must provide all these different services (multi-services) to the user.
Differences between traditional (telephony) and modern communication services
Conventional telephony communicates using:- the voice medium only,
- connects only two telephones per call, and
- uses circuits of fixed bit-rates.
In contrast, modern communication services depart from the conventional telephony service in these three essential aspects. Modern communication services can be:
- multi-media,
- multi-point, and
- multi-rate.
These aspects are examined individually in the following three sub-sections [5].
Multi-media
A multi-media call may communicate audio, data, still images, or full-motion video, or any combination of these media. Each medium has different demands for communication quality, such as:- bandwidthBandwidth (computing)In computer networking and computer science, bandwidth, network bandwidth, data bandwidth, or digital bandwidth is a measure of available or consumed data communication resources expressed in bits/second or multiples of it .Note that in textbooks on wireless communications, modem data transmission,...
requirement, - signal latencyLagLag is a common word meaning to fail to keep up or to fall behind. In real-time applications, the term is used when the application fails to respond in a timely fashion to inputs...
within the network, and - signal fidelity upon delivery by the network.
The information content of each medium may affect the information generated by other media. For example, voice could be transcribed into data via voice recognition, and data commands may control the way voice and video are presented. These interactions most often occur at the communication terminals, but may also occur within the network [2][3].
Multi-point
A few examples will be used to contrast point-to-point communications with multi-point communications. Traditional voice calls are predominantly two party calls, requiring a point-to-point connection using only the voice medium. To access pictorial information in a remote database would require a point-to-point connection that sends low bit-rate queries to the database and high bit-rate video from the database. Entertainment video applications are largely point-to-multi-point connections, requiring one-way communication of full motion video and audio from the program source to the viewers. Video teleconferencing involves connections among many parties, communicating voice, video, as well as data. Offering future services thus requires flexible management of the connection and media requests of a multi-point, multi-media communication call [3][4].Multi-rate
A multi-rate service network is one which flexibly allocates transmission capacity to connections. A multi-media network has to support a broad range of bit-rates demanded by connections, not only because there are many communication media, but also because a communication medium may be encoded by algorithms with different bit-rates. For example, audio signals can be encoded with bit-rates ranging from less than 1 kbit/s to hundreds of kbit/s, using different encoding algorithms with a wide range of complexity and quality of audio reproduction. Similarly, full motion video signals may be encoded with bit-rates ranging from less than 1 Mbit/s to hundreds of Mbit/s. Thus a network transporting both video and audio signals may have to integrate traffic with a very broad range of bit-rates [3][5].Traditional networks
Traditionally, the various services mentioned above were carried via separate networks: voice on the telephone network, data on computer networks or local area networks (LANLocal area network
A local area network is a computer network that interconnects computers in a limited area such as a home, school, computer laboratory, or office building...
s), video teleconferencing on private corporate networks, and television on broadcast
Broadcasting
Broadcasting is the distribution of audio and video content to a dispersed audience via any audio visual medium. Receiving parties may include the general public or a relatively large subset of thereof...
radio or cable networks.
These networks are largely engineered for a specific application and are not suited to other applications. For example, the traditional telephone network is too noisy and inefficient for bursty data communication. On the other hand, data networks which store and forward messages using computers have very limited connectivity, usually do not have sufficient bandwidth for digitised voice and video signals, and suffer from unacceptable delays for the real-time signals. Television networks using the radio or the cable medium are largely broadcast networks with minimum switching facilities [2][3].
Benefits of a single network for multiple services
It is desirable to have a single network for providing all these communication services in order to achieve the economy of sharing. This economy motivates the general idea of an integrated services network. Integration avoids the need for many overlaying networks, which complicates network management and reduces flexibility in the introduction and evolution of services. This integration is made possible with advances in broadband technologies and high speed information processing [2][3].Fibre optics for broadband networks and MSO
While there are multiple network structures capable of supporting broadband services, an ever increasing percentage of broadband and MSO providers are opting for fibre optic network structures to support both present and future bandwidth requirements.CATV (cable television), HDTV (high definition television), VoIP (voice over internet protocol), and broadband internet are some of the most common applications now being supported by fibre optic networks, in some cases directly to the home (FTTh – Fibre To The Home). These types of fibre optic networks incorporate a wide variety of products to support and distribute the signal from the central office to an optic node, and ultimately to the subscriber (end-user).
Types of traffic carried by the network
Modern networks have to carry integrated traffic consisting of voice, video and data. The Broadband Integrated Services Digital NetworkBroadband Integrated Services Digital Network
In the 1980s the telecommunications industry expected that digital services would follow much the same pattern as voice services did on the public switched telephone network, and conceived a grandiose end-to-end circuit switched services, known as Broadband Integrated Services Digital Network...
(B-ISDN) satisfies these needs [7]. The types of traffic supported by a broadband network can be classified according to three characteristics [6]:
- BandwidthBandwidth (computing)In computer networking and computer science, bandwidth, network bandwidth, data bandwidth, or digital bandwidth is a measure of available or consumed data communication resources expressed in bits/second or multiples of it .Note that in textbooks on wireless communications, modem data transmission,...
is the amount of network capacity required to support a connection. - LatencyLagLag is a common word meaning to fail to keep up or to fall behind. In real-time applications, the term is used when the application fails to respond in a timely fashion to inputs...
is the amount of delay associated with a connection. Requesting low latency in the Quality of ServiceQuality of serviceThe quality of service refers to several related aspects of telephony and computer networks that allow the transport of traffic with special requirements...
(QoS) profile means that the cells need to travel quickly from one point in the network to another. - Cell-delay variation (CDV) is the range of delays experienced by each group of associated cells. Low cell-delay variation means a group of cells must travel through the network without getting too far apart from one another.
Requirements of the different types of traffic
The different types of traffic found in a broadband network (with examples) and their respective requirements are summarized in Table 1.| TRAFFIC TYPE | EXAMPLE | REQUIRED BANDWIDTH | CELL-DELAY VARIATION | LATENCY |
|---|---|---|---|---|
| Constant | Voice, guaranteed circuit emulation | Minimal | Low | |
| Variable | Compressed video | Guaranteed | Variable | Low |
| Available | Data | Not guaranteed | Widely variable | Variable |
See also
- Asynchronous Transfer ModeAsynchronous Transfer ModeAsynchronous Transfer Mode is a standard switching technique designed to unify telecommunication and computer networks. It uses asynchronous time-division multiplexing, and it encodes data into small, fixed-sized cells. This differs from approaches such as the Internet Protocol or Ethernet that...
(ATM) - Teletraffic engineering in broadband networksTeletraffic engineering in broadband networksTeletraffic engineering is a well-understood discipline in the traditional telephone network, where traffic patterns are established, growth rates can be predicted, and vast amounts of detailed historical data are available for analysis. However, for modern broadband networks, the teletraffic...
- BroadbandBroadbandThe term broadband refers to a telecommunications signal or device of greater bandwidth, in some sense, than another standard or usual signal or device . Different criteria for "broad" have been applied in different contexts and at different times...
- Circuit-switched networks
- Packet-switched networks
[1] ATM Congestion Control, Fang Lu, http://www.cse.ohio-state.edu/~jain/cis788-95/ftp/atm_cong/index.html, Last accessed 1 March 2005.
[2] Saito, H., Teletraffic Technologies in ATM Networks, Artech House, 1993. ISBN 0-89006-622-1.
[3] Hui J., “Switching and traffic theory for integrated broadband networks”, Kluwer Academic Publishers, 1990. ISBN 0-7923-9061-X.
[4] Sexton M., Reid A., “Broadband Networking: ATM, SDH and SONET”, Artech House Inc., Boston, London, 1997. ISBN 0-89006-578-0.
[5] Ferguson P., Huston G., “Quality of Service: Delivering QoS on the Internet and in Corporate Networks”, John Wiley & Sons, Inc., 1998. ISBN 0-471-24358-2.
[6] ATM Traffic Control, Mark Juliano, http://www.byte.com/art/9412/sec10/art5.htm, Last accessed 3 March 2005.
[7] Congestion Control and Traffic Management in ATM Networks, Invited submission to Computer Networks and ISDN Systems, Vol 28 (1996), 1723-1738, Raj Jain, http://www.cse.ohio-state.edu/~jain/papers/ftp/cnis/index.html, Last accessed 7 March 2005.
External links
- User-Centric Broadband Networks Technology White Paper