Brennabor Typ P
Encyclopedia
The Brennabor Typ P, launched in 1919, is the first car introduced by the Brennabor company
Brennabor
Brennabor-Werke AG was a German manufacturer of infant buggies, bicycles, motor-cycles and, for two deacedes, of powered motor vehicles. It was based in Brandenburg an der Havel and operated between 1871 and 1945.- History :The company was set up in 1871 by three brothers named Adolf, Carl and...

 after the First World War. For a few years in the early 1920s this middle market model, with production reaching 100 units per day just for the domestic market, took the company to the top of the German auto-sales charts.

The car was powered by a 4 cylinder side-valve
Flathead engine
A flathead engine is an internal combustion engine with valves placed in the engine block beside the piston, instead of in the cylinder head, as in an overhead valve engine...

 engine of 2.1 litres, mounted ahead of the driver and delivering 24 hp at 2,400 rpm. Power was delivered to the rear wheels through an asbestos
Asbestos
Asbestos is a set of six naturally occurring silicate minerals used commercially for their desirable physical properties. They all have in common their eponymous, asbestiform habit: long, thin fibrous crystals...

 lined clutch
Clutch
A clutch is a mechanical device which provides for the transmission of power from one component to another...

and a four speed gear box controlled with a gear lever mounted outside the passenger area, directly to the right of the driver’s seat. (As was normal at this time, the driver sat on the right-hand side of the car.)

The car sat on a U-profile pressed steel chassis with rigid axles and semi-eliptical leaf springing. It came as a P6 version with a six seater open topped body or as a P11, featuring a more sporty open topped four seater body. The mechanically linked foot brake operated on the drive shaft while the hand brake operated directly against the rear wheels.

A successor model, the Brennabor Typ PW, appeared in 1925. This shared the 2.1 litre engine of the earlier Typ P, but claimed maximum power was increased to 32 hp, achieved, now, at 2,600 rpm. The gear lever was relocated from the right hand edge of the car to a central floor mounted position, which necessitated changing gear with the left hand, since the driver continued to be conventionally positioned on the right-hand side of the car. The wheelbase was unchanged, but the standard bodies were nevertheless a little longer than on the previous model.

A third body style joined the existing two, as the Typ P was now offered, as the P15, with a four door body.

Taking the Typ P and the Typ PW together, by 1927 approximately 10,000 of the Brennabor Typ P models had been produced.

Technical Details

Typ P (8/24 PS) (Tax hp/German hp)) PW (8/32 PS) (Tax hp/German hp))
Production years 1919 - 1925 1925 - 1927
Bodies Open 4 seater, Open 6 seater Open 4 seater, Open 6 seater, 4 door sedan
Motor 4 cyl. In-line 4-stroke 4 cyl. In-line 4-stroke
Valvegear side (SV) side (SV)
Bore x stroke 80 mm x 104 mm 80 mm x 104 mm
capacity 2091 cm³ 2091 cm³
Power (PS / German hp) 24 27
Power (kW) 17.6 19.9
at rpm (1/min.) 2,400 2,600
Compression ratio 4.5 : 1
fuel consumption 12 l / 100 km 12 l / 100 km
Gears 4 speed with externally mounted lever 4 speed with central floor mounted lever
Top speed 65 km/h (40 mph) 75 km/h (47 mph)
Unladen weight ca. 1400 kg 1450 - 1550 kg
Gross loaded weight ca. 2150 kg 2200 - 2300 kg
Electrical system 12 Volt 12 Volt
Length 4400 mm 4600 mm
Width 1650 mm 1650 mm
Height 2000 mm 2000 mm
Wheel base 3165 mm 3165 mm
Track front / back 1350 mm / 1350 mm 1350 mm / 1350 mm
Tires 820 x 120 HD 820 x 120 HD or 30" x 5,77" ND


Sources

  • Oswald, Werner: Deutsche Autos 1920-1945, Motorbuch Verlag Stuttgart, 10. Auflage (1996), ISBN 3879435197
The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK