Australian Road Rules
Encyclopedia
The Australian Road Rules (the Rules) are a set of model road rules developed by the National Road Transport Commission (NRTC) which form the platform for State and Territory road rules across Australia
Australia
Australia , officially the Commonwealth of Australia, is a country in the Southern Hemisphere comprising the mainland of the Australian continent, the island of Tasmania, and numerous smaller islands in the Indian and Pacific Oceans. It is the world's sixth-largest country by total area...

. The first edition of the Rules was published on 19 October 1999, and marked a milestone in road safety policy and legislation across Australia.

History

Road transport law, including the rules of the road or the road rules, is set by each of the eight State and Territories in Australia due to an absence of Commonwealth power to legislate in much of that field. Historically, there were many differences between the eight different sets of traffic rules in force in Australia. The Australian Road Rules project was aimed at establishing a model set of road rules that States and Territories across Australia could adopt in their local laws to create improved national uniformity or consistency.

The 1930s

Calls for a set of uniform road rules for Australia came as early as 1933. Writing following the approval of the Australian Road Rules, Ian Shepherd and Fiona Calvert quoted J C Watson the President of the NRMA of New South Wales who wrote in that year -
“Motoring in Australia is daily taking on more of a national aspect by shedding its earlier parochial garb. Yet there are few fields in which legislative and regulatory inconsistency have freer play than in the Australian motoring world. At the moment a motorist passing from one State into another has to unlearn much of what he has learned in his own State and to learn a lot that is strange to him. This produces irritation – or worse - in the motor owner and motor driver, and tends to unnecessary costs of traffic administration (which the motorist usually has to pay for). It also adds to traffic dangers through ignorance or unfamiliarity with local conditions or practices on the part of drivers. Therefore, anything that can be done to lay down a national basis for motor traffic control must be of much practical value. Common sense suggests that there should be uniformity instead of variety, and that the growing volume of interstate traffic requires a national instead of a local viewpoint in things common to traffic in all of the States. Were all motor vehicles kept within their own State boundaries, little disadvantage would arise from the present welter of confusing motor legislation, but when a system becomes national, a system (or lack of system) of arbitrarily fixed laws that differ substantially in matters in which there should be common agreement appears absurd, if not intolerable."


Watson concluded by saying -
"I do not consider that it would be very difficult, once the groundwork had been prepared, to induce the various State Governments to agree to a national conference of traffic authorities and representatives of the recognised motoring organisations in the Commonwealth to consider the whole issue.”

1940 - 1988

Shepherd and Calvert observed that initial efforts to achieve national road rules in Australia started in the late 1940s -
"...the first attempt to establish national Road Rules came in 1947. In that year, Australian Transport Ministers (constituted as the Australian Transport Advisory Council) established the Australian Road Traffic Code Committee. The first version of a National Traffic Code was issued in 1958 and the last in 1988. While some jurisdictions adopted parts of the Code with some enthusiasm others ignored significant parts of it. Thus, despite a lot of hard work the success of this venture was mixed and crucially it did not result in national uniformity or detailed consistency in State and Territory traffic laws. In short, it did not achieve truly Australian Road Rules on the ground."

The 1990s

The major advances in securing more uniform or consistent road rules came in the 1990s.
"Fortunately, Ministers and Commonwealth, State and Territory officers kept persisting and in the early 1990s Austroads commenced work on the Australian Road Rules project with a particular emphasis on the use of plain English. While Austroads advanced the Rules quite a way, in 1995 responsibility for the project was transferred to the NRTC."


The Australian Transport Council (comprising each of of Australia's transport ministers) approved the final draft Rules submitted by the National Road Transport Commission. The first edition of the Rules was published on 19 October 1999 and was available for formal adoption by States and Territories from December 1999.

Outline

The broad content of the Australian Road Rules is explained by Shepherd and Calvert as follows -

"The ... Rules contain the basic rules of the road for drivers and riders of motor vehicles, riders of bicycles, pedestrians, passengers and others. In very broad terms, the rules deal with the following sorts of things:
  • speed limits (for lengths of roads, areas and zones) and how they are set (e.g. by sign)
  • rules about turns (left and right, U-turns and hook turns)
  • changing direction (e.g. indicating) and stopping (e.g. stop signals)
  • what to do when faced by traffic lights and arrows
  • giving way in various situations (e.g. when facing stop or give way signs or lines, when not facing any lights, signs or lines, at pedestrian and children’s crossings, etc.)
  • what to do when faced by particular traffic signs (e.g. turning signs) or road markings (e.g. traffic lane arrows)
  • roundabouts
  • level crossings
  • keeping left, overtaking, driving in lanes or lines of traffic and merging, special purpose lanes
  • restrictions on stopping (e.g. in or near intersections) and parking
  • lights and warning devices
  • rules for pedestrians including persons on wheeled recreational devices
  • special rules for bicycle riders (eg. mandatory helmet wearing
    Bicycle helmets in Australia
    Bicycle helmet use in Australia has been mandatory since 1989, the first country to do so. The current legally required standard for a bicycle helmet is AS/NZS 2063.-Bicycle usage:...

    )
  • rules for persons travelling in or on vehicles (e.g. seatbelt requirements)
  • miscellaneous road rules (e.g. driving a vehicle in reverse)
  • specification of applicable traffic signs."

NRTC, its Act and the intergovernmental agreements

The National Road Transport Commission was an independent statutory body established under Commonwealth legislation to give effect to two intergovernmental agreements entered into by the Commonwealth, the States and the Territories in 1991. These were changed by amending agreements entered into by heads of governments in the late 1990s.

The agreements committed each of the nine jurisdictions in Australia
Australia
Australia , officially the Commonwealth of Australia, is a country in the Southern Hemisphere comprising the mainland of the Australian continent, the island of Tasmania, and numerous smaller islands in the Indian and Pacific Oceans. It is the world's sixth-largest country by total area...

 (the States, Territories and the Commonwealth) to work together in the interests of reforming road transport for the operation of both heavy and light vehicles. The Act, which arose as a result of those agreements, established the Commission and its objectives. In broad terms, the NRTC sought to develop national laws, policies and procedures to achieve four main things. These were:
  • improved transport productivity
  • improved safety
  • a cleaner environment
  • lower administration costs.

Uniformity or consistency

An important part of the Commission’s role, now the responsibility of its successor the National Transport Commission
National Transport Commission
The National Transport Commission is a statutory body created to develop and coordinate national regulatory and operation reform in Australia....

, was to establish a uniform or consistent regulatory environment for road transport across the nation.

As Shepherd and Calvert observed -
"The NRTC was established to help road transport function in a way that allowed it to function unencumbered by differing jurisdictional requirements that stifle efficiency and productivity and potentially compromise safety and the environment. That is, to overcome the effects of the so-called lines in the sand that represent State and Territory borders."

Approval and implementation

The National Road Transport Commission developed proposals in consultation with industry, governments and other stakeholders and then made recommendations on national policies and legislation to Commonwealth, State and Territory Transport Ministers. A formal voting process set out in the intergovernmental agreements determined the outcome with each Minister’s vote having the same value. If approved by a majority of Ministers, governments implemented the approved reforms “on the ground” with the NRTC playing a broad coordination role. By any measure, this was a challenging process as the history of similar schemes to that point had been mixed broadly due to the special problems posed by seeking to satisfy nine governments and their bureaucracies and industry and the public as well.

Template and model legislation

Initially, the intergovernmental agreements heavily emphasised the development of template legislation as a prime means of entrenching road transport reform in the laws of States and Territories. This is important background to an understanding of how the Australian Road Rules were developed. With the template legislation scheme mandated in the national road transport intergovernmental agreements, legislation was intended to be enacted or made by the Commonwealth for operation in the Australian Capital Territory
Australian Capital Territory
The Australian Capital Territory, often abbreviated ACT, is the capital territory of the Commonwealth of Australia and is the smallest self-governing internal territory...

. The stated intention then was that that legislation was to be adopted unchanged by each of the States
States and territories of Australia
The Commonwealth of Australia is a union of six states and various territories. The Australian mainland is made up of five states and three territories, with the sixth state of Tasmania being made up of islands. In addition there are six island territories, known as external territories, and a...

 and the Northern Territory
Northern Territory
The Northern Territory is a federal territory of Australia, occupying much of the centre of the mainland continent, as well as the central northern regions...

 thus establishing national uniformity. Then as the template was amended, so the theory went, the law of other jurisdictions would change automatically.

While the Commission sought to deliver some national reforms as template legislation in selected instances, over time it became more likely that road transport reform would be delivered in model legislative form or even as policy. The emphasis in the late 1990s and early 2000s was targeted more at the speedy, on the ground delivery of reform without being bound up in process. In conjunction with jurisdictions, the Commission ultimately adopted a ‘horses for courses’ approach. In some instances the reduction of a reform to precise legislative wording was critical or very important to its success. The Australian Road Rules were a good example of this and were broadly delivered in a consistent way by States and Territories. In other instances, such precision became unnecessary and in some instances was a hindrance to achieving reform.

Delivery by jurisdictions

While the Commission was charged with developing reforms and obtaining approval from Ministers for them, it is the responsibility of States and Territories to entrench the reforms in their local laws. While the Commission could monitor progress it was largely powerless to ensure that reforms are implemented on the statute books and “on the ground” in practice. In the result, however, the Australian Road Rules developed by the NRTC were well adopted and entrenched across the country.

Multi disciplinary team

Shepherd and Calvert explained the process adopted by the National Road Transport Commission to develop and finalise the Australian Road Rules -
"...the Commission has chaired a multi-disciplinary Committee that has included, at one stage or another, policy officers, road safety specialists, traffic engineers, police, lawyers, legislative drafters and, at times, representatives of special interest groups."

Development and drafting

The starting point for the work of the project team was the road traffic rules that were in place in each jurisdiction. Detailed public consultations were also a feature of the policy development process. By 1996, arguably most of the policy basis for the Australian Road Rules was settled. Yet there was still widespread dissatisfaction with the state of the draft Rules at that point. Many thought the document was unenforceable and therefore useless as a template or model law. And so, the group worked very intensively through 1997 and 1998 to ensure that the Rules were not only satisfactory in a policy sense but crucially were drafted in such a way that they were enforceable. In effect, the Rules were completely redrafted using the dedicated resources of the Commonwealth Office of Legislative Drafting who liaised with the national Parliamentary Counsel’s Committee as the representatives of State, Territory
States and territories of Australia
The Commonwealth of Australia is a union of six states and various territories. The Australian mainland is made up of five states and three territories, with the sixth state of Tasmania being made up of islands. In addition there are six island territories, known as external territories, and a...

 and Commonwealth parliamentary drafters.

Peak Ministerial approval

Finally, by the end of 1998, the Commission considered that the draft Australian Road Rules were ready to be submitted to and voted on by Ministers. That vote was successful. In the result, the Commission considered that the process produced a superior set of national Rules. They were comprehensive, expressed simply and most importantly, would advance Australian road safety, although there was still room for further improvement as road safety research continued in later years.

Substantive features

The impact of the model road Rules on States and Territories varied from jurisdiction to jurisdiction. For example, while the banning of hand-held mobile phones while driving was initially a significant change for some jurisdictions, other jurisdictions had had such a ban in place for
many years. Based on feedback from States and Territories major changes for some jurisdictions were:
  • banning of hand-held mobile phones when driving
  • keeping left unless overtaking on multi-lane roads with a speed limit of more than 80 km/h
  • the zip merge rule (a driver in a line of traffic that is merging with one or more other lines of traffic travelling in the same direction must give way to a vehicle if any part of that vehicle is ahead of the driver’s vehicle, but only where there are no line markings or lane lines)
  • new stopping distances (various locations such as intersections, bus stops, crest or curve, railway crossings, children’s crossings)
  • prohibiting U-turns at signalised intersections unless otherwise signed
  • giving way to pedestrians at slip lanes
  • prohibiting the crossing of double continuous centre lines to enter or leave roads
  • prohibiting passengers travelling unrestrained in a vehicle’s load space (eg utilities)
  • two tier parking (no stopping, no parking)
  • prohibiting the crossing of single continuous lines unless turning onto or off the road
  • requiring people on skateboards, in-line skates (wheeled recreational devices) and wheeled toys to give way to pedestrians on footpaths
  • allowing footpath cycling by children under 12 years old.

The rules as a traffic handbook

One of the original ideas behind the development of the Australian Road Rules in the 1990s was that the Rules should be so simple that the book containing them would contain not only the law but double as a traffic handbook for learner drivers as well. This ambitious idea was probably always doomed to failure. Early and supposedly simple drafts of the Rules were deemed unenforceable by parliamentary drafters. The final approved version of the Rules was drafted in a plain English style favoured by Australian Parliamentary drafters and has proved since 1999 to have none of the enforcement problems evident in the earlier drafts.

Reader's guide

The Australian Road Rules contained a number of other interesting features that were innovative in Australian and possibly in the traffic law in other counties at the time they were first included. Each of these features was aimed at helping readers to interpret and understand the law. For example, the Rules contain a Reader’s Guide aimed at providing a general introduction to the content and structure of the Rules.

Diagrams

The Rules also made use of example diagrams to assist in the interpretation of particular rules. Again, this was unprecedented in Australian legislation at this point, particularly in traffic law. For instance, sub-rule 33 outlines how drivers are to make right turns. In basic terms, the rule says that if a road marking exists indicating how a right turn should be made, a driver must turn as indicated by that road marking (rule 33 (2)). However, if there is no such road marking, a driver must make the right turn so that the driver passes as near as practicable to the right of the centre of the intersection. Both of these situations are made clear by colour diagrams which are included in the rules themselves. The diagram feature is used regularly throughout the Rules, most notably to help explain give way rules.

Examples

Also, examples in narrative form supplemented many rules too, again to help readers with particular
rules and generally to make the law clearer for readers. This leads in to another feature of the Rules.

Use of colour

The National Road Transport Commission produced the Australian Road Rules in colour. Again, this was a revolutionary development in Australian traffic law and Australian law generally at the time as laws at that time were uniformly produced in black and white only. Each of the common and standard road signs and alternative signs was reproduced in colour in a Schedule to the Rules. However, if required, the diagrams could be viewed and interpreted satisfactorily in black and white as well.

Adoption

When the Australian Road Rules were in the final stages of negotiations, States and Territories
States and territories of Australia
The Commonwealth of Australia is a union of six states and various territories. The Australian mainland is made up of five states and three territories, with the sixth state of Tasmania being made up of islands. In addition there are six island territories, known as external territories, and a...

 began to turn their minds to how they would adopt them in local law. Methods of adoption varied across the nation. Some jurisdictions adopted the Rules in a quasi-template fashion by simply referencing the Rules document published by the National Road Transport Commission. Other jurisdictions, on the other hand, adopted the Rules by a “mirror” approach and basically reproduced the Rules in their local law.

Maintenance

States and Territories
States and territories of Australia
The Commonwealth of Australia is a union of six states and various territories. The Australian mainland is made up of five states and three territories, with the sixth state of Tasmania being made up of islands. In addition there are six island territories, known as external territories, and a...

 made a powerful point to the Commission as the Rules process was concluding. In essence, the jurisdictions said that the value of the national Road Rules would dissipate quickly, given the dynamic nature of traffic law, unless the Commission established a process to ensure the Rules were kept up to date. The National Road Transport Commission agreed that a maintenance process was necessary and submitted an appropriate proposal on an in principle basis to Ministers. Ministers then specifically approved the establishment of a maintenance process for the Rules when they approved the Rules themselves.

Since that time the details of the process have been settled with States and Territories and have been put into practice. In fact, the need for maintenance was seen to be so fundamental to ongoing national uniformity or consistency that it was written into the statute which founded the successor organisation to the National Road Transport Commission, the National Transport Commission
National Transport Commission
The National Transport Commission is a statutory body created to develop and coordinate national regulatory and operation reform in Australia....

. The National Transport Commission now acts as the coordinator of the Road Rules maintenance group.

Jurisdiction Exemptions

The vast bulk of the 351 rules and Schedules that comprised the initial 1999 version of the Australian Road Rules were determined by consensus. A further eight rules were subject to a special Ministerial vote. Some issues could either not be settled during the negotiations or were simply left to local law rather than delay the approval and implementation of the Rules. In other instances, it was simply agreed that some matters were not appropriate to be dealt with in a national document.

Ongoing activity

The Commission regarded the gradual minimisation of jurisdiction exemptions as a good example of how the maintenance process might be used not only to maintain national uniformity or consistency but also to enhance it. More fundamentally, new road safety policies and strategies emerge from time to time and will form the basis for changes to the rules including potential new controls.

Current activity

The National Transport Commission
National Transport Commission
The National Transport Commission is a statutory body created to develop and coordinate national regulatory and operation reform in Australia....

 is charged with maintaining the Australian Road Rules. From time to time, the Commission develops maintenance packages for the Rules which are submitted to the Australian Transport Council for the approval of Australia's Transport Ministers and for the ultimate adoption and roll out across the States and Territories of Australia
Australia
Australia , officially the Commonwealth of Australia, is a country in the Southern Hemisphere comprising the mainland of the Australian continent, the island of Tasmania, and numerous smaller islands in the Indian and Pacific Oceans. It is the world's sixth-largest country by total area...

.

External links

The source of this article is wikipedia, the free encyclopedia.  The text of this article is licensed under the GFDL.
 
x
OK